Enqueue put States and the

Similar Questions

• ESXi host goes to the State and the virtual machine does not restart on other host does not

  Hi all

  I'm looking for a solution, in which case the host goes to the State and the virtual machine on it does not restart on a different host (they'll just gray) does not not what could be the problem here and how to fix it

  later when the failed host returns upward machines either go to motor off the coast of the State, or they show that under tension

  While the host is down or not responding do not I am able to ping the host ESXi (5.5) and able to ping the default gateway and the DNS servers of the host itself

  Yes AF, the answer to all these questions is Yes, it is a HA and DRS cluster active, I tried restarting mgmt service, we use a shared storage (storage iSCSI HP 3PAR and left hand)

• Time of the value of a prepared statement and the differences in execution plan

  Hi guys... I have a doubt here that I was not able to specify the search on the internet.
  
  Is on prepared statements...
  
  When I do: con.prepareStatement (query);
  
  then the query is compiled and an execution plan is for this query on the database, I know. But what happens when I do con.close. Is the accessible yet statement caching other executions? to make this example:
  
  Suppose we are joining 20 tables and we have about 10 parameters for this query

  public ArrayList getData(String id1, String id2, String id 10) {       ArrayList response=new ArrayList();       Connection con=manager.getConnection();       String query="select name, phone, debtvalue, currency, etc from table1, table2, table3, table4, table20 where                           table1.id=table2.t1id and table2.id=table3.id and table2.fid=? and table1.fid=? and etc etc";//a big query       PreparedStatement pst=con.prepareStatement("select");       pst.setString (1, id1);       pst.setString (2, id2);       pst.setString (3, id3);       .       .       pst.setString (10, id10);       ResultSet rs=pst.executeQuery();       while (rs.next()) {               //do whatever and build the response ArrayList       }       rs.close();       pst.close();       return response; }

  Will be the compilation of the prepared statement and this execution plan is available for every performance of the getData method. Or a new plan of compilation and execution is calculated whenever I execute the method? Assuming that the running query takes a long time to maturity it its complexity and runs about 100 times a day in a production environment. It is advisable to use the prepared statement?
  
  Is the precompiled stuff avaible if I use a "" "NEW" "" said PreparedStatement with the same query?
  
  Thank you very much in advance for your answers...
  
  Published by: user4789473 on 25-mar-2013 17:14

  If you lose / close the statement prepared, Yes, you lose the ID. If you prepare again the same
  SQL, the DBMS must analyze the SQL code again, if to see if there is a query plan
  still/already existing for the DBMS session. According to the DBMS, it may or may not
  find/have/use plan, he created for the previous statement.

• Preserve the default state and the link using cookies

  Hello

  I don't know where to post this with the re-design of this forum; It has been a while so please forgive me if this is in the wrong g spot.

  I have a very basic link, wrapped in a UL tag.

  I use JQuery to give links a color when they are clicked by performing a function Add/Remove class, the status of the connection is more preserved by cookies so if a user returns to a page; It shows which tab they were viewing.

  The problem is; It is a single page and I want to set a default link or tab; say one. I don't know how to do this.

  That's what I'm looking for to accomplished:

  1. A user accesses the page and the first link is red (default)
  2. If the user clicks another link that the link is active and the first link loses its default status
  3. When the user returns the first link is nolonger by default, that's all that bind the selected user on first visit; This is because this link was Micaela using cookies.
  4. The first link will ONLY maintain the State by default, if the user deletes his cookies or visits to the page for the first time.

  Here's a piece of JQuery, I used to maintain the selected state:

  {$(document) .ready (function ()}

  var idActive = $.cookie ('cookieActive');

  If {(idActive)

  $('#'_+_idActive).addClass ('activeLink');

  }

  $('_ul_li_a').click (function () {}

  ID var = $(this) .attr ('id');

  $("ul_li_a").removeClass ("activeLink");

  $(this) .addClass ("activeLink");

  $('cookieActive', id) .cookie.

  $.cookie('cookieactive', id, {expires: 10000});

  });

  });

  I guess your jQuery works the way you want, and the only problem is how to define the default value.

  In this case, give your default link an ID, such as "default". Then add an else clause of the conditional statement in your jQuery:

  If {(idActive)

  $('#'_+_idActive).addClass ('activeLink');

  } else {}

  $('#default').addClass ('activeLink');

  }

• for statements and the movie clip variable names?

  Hi guys can you tell me why it does not work?

  (problem 1, it's that I can't call buttonmoce this way!)

  I'm trying to improve my writing code and the use of tables and for save me write this code over and over again

  See you soon

  void

  var gss:Array = ["gss1', 'gss2', 'gss3', 'gss4', 'gss5']

  for (var i = 0; i < 6; i ++) {}

  GSS [i] .buttonMode = true;

  GSS [i] .addEventListener (MouseEvent.Click, gssgo);

  function gssgo(e:MouseEvent) {}

  {if(e.currentTarget==GSS[i])}

  trace (GSS [i]);

  }

  GSS [i] .addEventListener (MouseEvent.ROLL_OUT, gssback);

  function gssback(e:MouseEvent) {}

  GSS [i]. Play();

  }

  }

  }

  good I will give that a go!

• How to use an IF ELSE statement and the xdoxslt: get_variable together?

  First of all, I'm a big fan of this forum and I would like to thank the community for helping to make better the world BI Publisher.
  
  I'm trying to populate a table with a value of years of data with column = PRODUCT and row = month to DATE. Here's the catch, not every month will be given. Then here's where is my problem, I am not able to use an IF ELSE statement with an expression XDOXSLT:GET_VARIABLE so that if there is no given for this month the default value will be 0.
  
  Can someone help me find a solution to one of the attempts below or a method entirely new? Thank you!
  
  BP4 = numeric value of months with a DATE (more code to extract only the month DATE not included here)
  JAN1 = PRICE if there is data, 0 otherwise
  
  (1) I tried and it did not work:
  <? If: xdoxslt:get_variable($_XDOCTX,'BP4'), 01 xdoxslt:set_variable($_XDOCTX,_'JAN1',PRICE) then another end if xdoxslt:set_variable($_XDOCTX,_'JAN1',0)? >
  <? xdoxslt:get_variable($_XDOCTX,'JAN1')? >
  <? end if? >
  
  (2) I tried and it did not work:
  <? xdoxslt:IfElse (xdoxslt:get_variable($_XDOCTX,'BP4') = '01', xdoxslt:set_variable($_XDOCTX,_'JAN1',PRICE), xdoxslt:set_variable($_XDOCTX,_'JAN1',0))? >
  <? xdoxslt:get_variable($_XDOCTX,'JAN1')? >
  <? end if? >
  
  (3) I tried and it did not work:
  <? xdofx:If xdoxslt:get_variable($_XDOCTX,'BP4') = '01' xdoxslt:set_variable($_XDOCTX,_'JAN1',PRICE) then another end if xdoxslt:set_variable($_XDOCTX,_'JAN1',0)? >
  <? xdoxslt:get_variable($_XDOCTX,'JAN1')? >
  <? end if? >
  
  example of XML data:
  < ROW >
  < name > Craig Hernandez < / NAME >
  < DATE > 2013 - 01-01 T 00: 00:00.000 + 08:00 < / DATE >
  < PRICE > 31 < / PRICE >
  BPD of < PRODUCT > < / PRODUCT >
  < / ROW >
  
  
  -TRD
  
  Published by: 990965 on February 28, 2013 08:27

  >
  (1) I tried and it did not work:
  
  
  

  (2) I tried and it did not work:
  
  
  

  (3) I tried and it did not work:
  
  
  >
  so

  works for me, it's

• DECODE statement and the argument limits

  No one knows the number of arguments that the DECODE statement allows you to enter. I currently have 863 and it gives me an error message when I try to run the query.
  
  Database - ORA-00939 error: too many arguments for the function.
  
  Thank you
  Chris

  Hello

  You still have too many parameters your decodes, the limit is 250 so you can enter only 124 values and decoded. I would like to nest decodes by doing:

  DECODE (point, "c1", "v1", "c2", "v2", "c3", "v3",..., DECODE (point, 'c4', 'v4', 'c5', 'v5', 'c6', 'v6',..., DECODE (...)))

  Alternatively, you can for example use case

  WHEN BOX point IN ( END)

  Rod West

• Select the statement and the Group of

  Hi all

  I have this code to display the total number of orders by customer id:

  Select customer_id, sum (order_total) total

  of demo_orders

  Customer_id group;

  and it gives me this result:

  CUSTOMER_ID TOTAL

  ----------- ----------

  1 2380

  2 2370

  3 2420

  4 1060

  5 1090

  6 950

  7 2760

  7 selected lines.

  But instead of the ID, I want to display their names, like this:

  CUSTOMER TOTAL

  Brown, John 3450

  ... and so on

  How do I do that?

  I know I can't include these columns concatenated in the selection list, because I would have to be included in the GROUP BY clause...

  Thank you.

  I know I can't include these columns concatenated in the selection list, because I would have to include it in the

  Huh? Why not you. Have you actually tried it?

  Just do what you say - include names concatenated in the select group of clauses.

  Or you can just join the query you have each other to get the names, since we have no idea where the names are still stored. If they are in the same table as the ID then just use the solution "you know you can't do '!

• When I put an and THE points in my timeline first I run the risk of deletion of an entire track of clips. Is there anyway I can percentage it?

  I lost a lot of work because of this. I keep large enough back ups, so, fortunately, nothing is lost except a few hours of work. I tried for a few years to be super careful and I just delt with having to rebuild the areas, but the project I'm on in this moment is really wide, and I've had a client several times now, pointing out that things are missing that we had worked on. This reflects very badly on me.

  Thank you

  Heath

  Heath,

  Sorry that I misunderstood your question.

  the Erase function while using IN outs is useful for some people, but I've never used

  check my track targets so I delete not hundreds of hours of work.

  Ah, I see what is happening now. Unfortunately, this is how most NLE works in general. If the securities are covered, the clips are subject to deletion between In and Out of brands. With this power can actually work in your favor in many cases. For that matter, what I would focus on creating and memorizing keyboard shortcuts allowing you to alternate selection and locking.

  That said, I share your frustration that NLE is always the way you want to. If you really can't stand this behavior, you can still file a feature request.

  Other than a feature request, the only solution of continuously improving your workflow around the application works to make less mistakes. Memorize shortcuts keyboard, expansion and contraction of the user interface according to your current task, are examples of using the simple methods to help you work faster and more efficiently. I've been publishing for decades and always find ways each day to save time, especially measures relating to repetitive tasks.

  I call NLE editing "dance on a gimbal. What I mean is that you don't have to pay a lot of attention to your physical actions as you perform the operation of the brain of the edition. As an editor, I do most of the errors when my brain wants to go faster than my hands and I make mistakes such as the removal of clips, that I didn't. If you make mistakes, slow down a little and be more deliberative in your edition of keystrokes and mouse movements. Of course, Ctrl/CMD + Z is your friend. Please also familiarize yourself with the history panel and make sure that your automatic backup works. Do save money for your project as often as you like, as well.

  Please feel free to comment or ask questions.

  Thank you

  Kevin

• case statement and the problem posed by the...

  Hello..
  
  Here is the code I use in my pl/sql anonymous block:
  

  DECLARE
  
   X555 NUMBER;
  
   P1_X2 varchar2(10) := to_char(sysdate, 'dd.mm.yyyy');
   
  BEGIN
  
  case 
  
  when 
  P1_X2 = to_char('sunday') 
  then
  SELECT COUNT(*) into X555 FROM biwh.ORGANIZ Tbl 
   WHERE SAM_FORMA IN ('16') and IDEN_N_TAR in to_date(/*:*/P1_X2, 'dd.mm.yyyy')-3;
  
  else
  
  SELECT COUNT(*) into X555 FROM biwh.ORGANIZ Tbl 
   WHERE SAM_FORMA IN ('16') and IDEN_N_TAR in to_date(/*:*/P1_X2, 'dd.mm.yyyy')-1;
  end case;
  
  dbms_output.put_line(X555);
  
  end; 

  I want to do something like this:
  If it's Sunday, leave this part of the labour code:
  

  SELECT COUNT(*) into X555 FROM biwh.ORGANIZ Tbl 
   WHERE SAM_FORMA IN ('16') and IDEN_N_TAR in to_date(/*:*/P1_X2, 'dd.mm.yyyy') -3; 

  can you tell me the correct syntax of the code? where did I did mystake?
  
  SRY for my English...

   P1_X2 varchar2(10) := to_char(sysdate, 'dd.mm.yyyy');
  
  BEGIN
  
  case 
  
  when
  P1_X2 = to_char('sunday') 
  

  In the light of the foregoing, you set P1_X2 to a string value that resembles '05.10.2009' and then try to compare it to a string that looks like "Sunday".

  I'd be tempted to define P1_X2 as a DATE, then check against that for example

    p1_x2 DATE := trunc(SYSDATE);
  
  BEGIN
  
   CASE TO_CHAR(p1_x2,'fmday')
      WHEN 'sunday' THEN
        SELECT COUNT(*)
        INTO   x555
        FROM   biwh.organiz tbl
        WHERE  sam_forma IN ('16')
        AND    iden_n_tar = p1_x2 - 3;
  
      ELSE
  
        SELECT COUNT(*)
        INTO   x555
        FROM   biwh.organiz tbl
        WHERE  sam_forma IN ('16')
        AND    iden_n_tar = p1_x2 - 1;
    END CASE;
  

  The above assumes that you store iden_n_tar as a 'date at midnight '.

  You could go further and have a single query that moves from the "cause" of the where clause:

        SELECT COUNT(*)
        INTO   x555
        FROM   biwh.organiz tbl
        WHERE  sam_forma IN ('16')
        AND    iden_n_tar = p1_x2 - CASE TO_CHAR(p1_x2,'fmday')
                                                    WHEN 'sunday' THEN 1
                                                    ELSE 3
                                                 END;
  

• Bug: States and Textlink color settings.

  The range of States and the button itself for the 'Active' State does not display the color assigned to the color palette. See attached screenshot.

  Thank you.

  

  I think I got the point, I put the link of the colors under the site properties.

• My daughter has a laptop HP Pavilion G6 and the hinges broke-

  as she's in College, living away from home, it is difficult to see exactly what is wrong, but I have photographs, she sent me. Please could advise you on the measures to be taken that the machine is essential to his success at the University.

  I hope you can help?

  

  MrWalker.

  Discovered that the AC will work in the United States and the United Kingdom.

  Sent one with the laptop AC adapter.

  It takes just the cord with UK plug.

  The only other thing that can be a problem is there a USA keyboard. "' No English no Pound Sign."

  You can US ASCII code but it's a few key strokes.

  Or buy one and replace.

  http://www.eBay.co.UK/ITM/Dell-E5400-E5500-E6400-E6500-E6410-E6510-M4500-M2400-keyboard-RX221-UK-/111440034584?PT=UK_Computing_Laptop_Keyboards&hash=item19f257fb18

  Very easy to replace.

  Let me know what you decide on that.

  I'm going to PM the USPS tracking number.

  The last laptop that I sent to the r - u took about 10 days.

  REO

• Action, State and events, CTF files

  Hello

  In my project, I received a labview program that has a main VI and about 100 SubVIs.  Some of the subVIs are named: Action, States and events. And a Subvi is written for each user action. Actions, States, and the screws of events are CTL files.

  Is - any technique of special programming used in labview for any specific purpose? I am a novice in labview.

  Thank you

  Josée Vilas V

  Vilas,

  The .ctl files are custom controls.  Without seeing them, I can't be sure, but I suppose they could be witnesses typedef'ed enumerated (enum).  These are often used for engines of the action and state machines.

  The state machine is a widely used program architecture. There are examples in the design templates that ship with LabVIEW.

  If you have had no training in LabVIEW, the online tutorial are a good starting point.  It would be very interesting to spend a few hours before your dive in your project.

  Lynn

• I have the print head and the alignment of the problems with our officejetpro8500 910 a.

  We noticed that the cyan ink was not printing. The product is out of warranty about five weeks before we noticed a problem. We have replaced all the ink with the new hp ink cartridges. We have tried printhead cleaning several times until the third level cleaning when cleaning the print head has failed. We tried to align the printheads without success. We have been dealing with this during more than a month now. We have only 440 pages printed during our first page of self-test diagnostics. Our print head shows that it is under warranty until April 4,2012. We consulted a repair center. We have exausted all the other options until the replacement printhead. We changed to print in black only. Now, she wants to print a test page everytime we try to print something. Ink, we bought at costco for this printer was a third of the price of a new model of 8600. Please help before my wife beat me with this printer!

  If the printhead says it expires April 3, 2013, so the date of warranty.  You should be able to get a replacement print head by contacting technical support of HP and good news, it should be free, since the part is under warranty.  You can join the 1-800-474-6836 technical support to the United States and the Canada International users click here.  Let me know what happens.

• Problem with States within the composition on the subpages only

  I use a composition to create and menu/fly on boxes of content. So far, it it show I want. The problem is when I go to another page in the site, the styles do not stick to the menu/composition States.

  It is very obvious if you go to this link:

  Home

  Fly over the AREAS of PRACTICE and then click on INJURY. Once on the page of the injury, you can see that the applied styles do not stick on the 'normal' State of the menu.

  It is meaningless since it's the same master page, that I use for the home page and States and the styles are there.

  I appreciate the help that anyone may be able to offer!

  Thank you!

  Hmm, if you wish you can send me your .muse file in a private message and I'll have a look in a bit. If you do, please DO NOT send any personal login or password. Just the .muse file is all that is necessary.