Ensure the removal of hard disk

Similar Questions

• Removal of the catalog is also the removal of hard disk

  I have a problem. So far I had a catalog. Now I am creating 2, one for the family and the other for other stuff. I tried to delete only from the catalog so that I can download it again the images in the new catalogue. However, when I check using Explorer, the files do not exist! I don't HAVE NOT check box to remove the images from the hard drive. Also, I tried to move the photos within the PSE10 Organizer. But that's just the visible images in both. What should I do? Fortunately, I have backups and I did it only to a few.

  A test, if you use the thumbnail view, deletion of the catalogue only works as it should?  (It's here).

  Ken

• Windows Boot Manager, I want to change the Configuration of hard disk

  I have a computer with two former 500 GB Hard Drives.  The "Legacy" operating system is installed on the first physical hard disk in the system and Windows 7 is installed on the second physical hard disk, they are the identical WD drives.  I bought a new Seagate Barracuda 1000 GB drive, I want to use in place of the mark.

  So currently I have:

  SATA-0, score 0: Legacy 500 GB OS

  SATA-5, score 0: 500 GB Windows 7

  With the new player, I want to:

  SATA-0, score 0: Legacy 500 GB OS

  SATA-0, Partition 1: 500 GB Windows 7

  I have disk imaging software, able to copy both disks to the new partitions on the new disk.  What I want to know is how can ensure me that I continue to get the start menu to see the two operating systems.

  Of course, I will still have the old hard disks available, and I can always put them in.  It's just that the cloning process takes a long time, and I would like to have my procedure in advance.  The first time I have start the system with the 1 TB drive, it will not be a disk of 500 Go SATA-5, score 0: in the computer.  I don't know which files must be modified to search for Windows 7 in the new location.

  I shouldn't need to do a reinstall of windows.  I think I found the answer to what I was looking elsewhere.

  I remember that two years ago, when I set up the Dual boot system, I followed these instructions:

  http://www.SevenForums.com/tutorials/8057-dual-boot-installation-Windows-7-XP.html

  When I did, I had a dual boot menu:

  -Old Version of Windows

  -Windows 7 Professional

  Of course I meant "Windows XP" rather than "earlier Version of Windows.  I searched and found that a tool exists to modify this menu.  I don't remember what they called the tool when I presented this request.  I was pretty sure that the tool would allow me to have the change of start menu where he sought the installation of Windows7.

  Today, I found the name of the tool, it is called BCDEDIT. EXE.  It allows you to safely edit the menu file, and startup locations resemble the old file boot.ini of Windows NT days.  Here's what the tool then generates on the command line.

  Windows Boot Manager
  --------------------
  identifier {bootmgr}
  Device partition = D:
  Description Windows Boot Manager
  settings regional en-US
  inherit {globalsettings}
  default {current}
  RESUMEOBJECT {a68ca6ef-27a1-11e3-bc5b-844b6ef301be}
  displayorder {ntldr}
  {current}
  toolsdisplayorder {memdiag}
  timeout 8 / / used to be '30'

  Windows Legacy operating system loader
  ------------------------
  identifier {ntldr}
  Device partition = D:
  path \ntldr
  Description Windows XP / / used to be "Earlier Version of Windows"

  Windows boot loader
  -------------------
  identifier {current}
  Device partition = C:
  path \Windows\system32\winload.exe
  Description of Windows 7
  settings regional en-US
  inherit {bootloadersettings}
  recoverysequence {a68ca6f1-27a1-11e3-bc5b-844b6ef301be}
  recoveryenabled Yes
  OSDEVICE partition = C:
  SystemRoot \Windows
  RESUMEOBJECT {a68ca6ef-27a1-11e3-bc5b-844b6ef301be}
  NX OptIn

  I have foound good information about this tool on:

  http://www.nextofwindows.com/

• How to check the type of hard disk of the windows operating system?

  on linux, we can find the hdd for example of name setail

  Type a - ide

  SDA - ACHI or sata or sas

  a way to find the type of hard disk in the windows operating system? as linux

  any command or something

  In Windows 7, you can get a lot of details by selecting Start, all programs, accessories, System Tools, system information, components, storage disks. It was very similar to Windows XP, but for all information users tend to use Everest or Belarc Advisor for additional information not available. Everest has been best Bellarc advice but they ceased to offer tan updated free version. However, the 2.20 version is always available from third-party sites.
  http://www.Softpedia.com/get/system/system-info/Everest-Home-Edition.shtml

• I have home premium Windows 7 with activation key. I replaced everything at the time of hard disk. I'm not able to activate Home premium Windows 7 please guide me

  I have home premium Windows 7 with activation key. I replaced everything at the time of hard disk. I am not able to install or upgrade Home premium Windows 7

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Using the service 'Release hard disk': some pictures of stay in "Update the Photos to reissue", even if I publish it

  Hello

  First of all please excuse my bad English. [I am french :-)]

  I have 2 different problems with pictures in smart albums used in a service of "Publish on hard drive" [Publication of the Service of hard disk] :

  -some of them stay in the section "Updating the Photos to republish" ['Changed to republish photos'] even when I publish it. The published photo is created and saved on my hard drive, but the picture goes to the section "Published photos" [published Photos by] for a second and then go back to the section "update the Photos to republish. To move back then in 'Published Photo', I need to use the "mark as up to date" [mark as updated] option in the right click menu.

  d ' other hand, some ot them (maybe the same) are still stuck in the section 'photos Publised' even if I do some changes (adding keyword, change some options of development...).

  Can I have some help please?

  Fabien.

  I had the same problem and I found the solution here: Lightroom CC 2015, error Publishing Services

  -Terje

• Reconnect the data store after removal of hard disk

  I have two identical Dell R610 servers.  I removed the readers of one of the servers and put them in the other.  ESX came very well and I can connect to the host with the vSphere client.  However, the data store has disappeared and 4 virtual machines that were on the server are "(inaccessible) unknown".  The device comes in storage.  It's a simple, 4 drive RAID5 set connected to the local controller inside the server.

  What can I do to reattach the data store?

  I tried both 'Keep the existing signature' and 'assign a new signature.  Both options produce the same result ' selected disk already Dad a VMFS datastore. ".  Select another disk.

  The data store is obviously there and intact.

  Sounds like the issue in the store of data missing and not mountable. You can also take a look at http://kb.vmware.com/kb/1015986 to see if that helps.

  André

• iMac 27 "mid-2011 hard drive failed, fan to full after the removal of HARD drive

  iMac (27 inch, mid 2011)

  2.7 Ghz i5

  12 GB of RAM

  I have a fault where the HARD drive fan runs at max speed (RPM 5431, 51 * C temp).

  The first symptom was a rattling noise from the factory 1 TB HARD drive, which has disappeared from the system, to be replaced by a disk of 4 GB in size. Then the fan started running at max speed.

  A few months ago, I installed a 2nd drive HARD, an SSD and use this to all the data, so the 1 TB drive HARD original was basically unused and empty. To try and stop the fan and also run the disk diagnostics failed I've removed it from the iMac. However the HARD drive fan is always full.

  I ran the Apple Hardware Test and received the error message: 4SNS/1/40000000: TH00 - 9,000

  Given the primary SATA HDD is now removed, I also set the temperature probe? Are there other fixes to this problem of fan? I didn't intend on replacing the HARD disk immediately that this is not necessary at this stage.

  Thank you!

  Shaun

  shaun02 wrote:

  I ran the Apple Hardware Test and received the error message: 4SNS/1/40000000: TH00 - 9,000

  Given the primary SATA HDD is now removed, I also set the temperature probe? Are there other fixes to this problem of fan? I didn't intend on replacing the HARD disk immediately that this is not necessary at this stage.

  Yes, take a look on > acs http://blog.macsales.com/10146-apple-further-restricts-upgrade-options-on-new-im

• Satellite A500 - 19 X - no boot and removal of hard disk

  Hello

  I have a Satellite A500 - 19 X and I put it in mode 'sleep' earlier, I returned later to the laptop to get sleep when suddenly the screen went black.

  I rebooted the machine by holding the power button and it turned back. When I got to the logon page I tried to log in, but got another black screen when I had entered my details.

  After her that I couldn't turn on the pc correctly, I had a brief period where I could use the network only, without the battery in and he would get to the windows logon, but then the screen turns off again when I tried to log on.

  Currently I can't turn on the laptop at all as when I turn it on it didn't post, nothing happens on the screen with or without block/sector.

  I'll send the laptop for repairs, but I have some urgent data I need off the hard drive.
  I have an enclosure for hard to hold the disc so that I can retrieve the data there but I'm unable to remove the hard drive.

  Are there instructions on how to do it?
  I tried to unscrew the cover for the hard drive, but I'm unable to remove the cover.

  Any help on this would be highly appreciated.

  > Currently I can't turn on the laptop at all as when I turn it on it didn't post, nothing happens on the screen with or without block/sector.

  Looks like a hardware issue it damage of s that this happened, but I think that it s just a bad luck
  I think that the ASP in your country might help you

  > I have an enclosure for hard to hold the disc so that I can retrieve the data there but I'm unable to remove the hard drive. Are there instructions on how to do it?

  I wonder if you checked other categories in this forum.
  Forum provides a nice user replacement category. Here you can find movies how to remove hard disks:
  http://forums.computers.Toshiba-Europe.com/Forums/Forum.jspa?forumid=116

  The A500 is not listed, but the procedure is very similar to the other series, A300 or L500.

• The user of the 21 Tap hard disk is replaceable?

  Anyone know if the hard drive in the Tap 21 replaceable by the user?

  I see 21 Tap has been released and he is seriously considering.  But I can't tell by images or any document, if the hard drive is replaceable by the user or not. Actually in the pictures I see even any way that a user would open a part any Tap 21 at all.

  I would be VERY hesitant to buy a PC with a hard disk without the possibility to replace that hard drive myself if it is crushed or upgrading to a bigger in the future. To send a PC into a service center for several days for an easily manipulated hard drive failure or upgrade would be extremely boring, to say the least.

  I know that it was possible within 20 Tap, and it's obvious from the pictures of 20 as part of the back can be removed.  But the tap of 21 is a completely smooth piece, so there is no obvious way to get hard disk that I see.

  Thank you.

  Thanks NickT.

  I was hoping that wasn't the case, as the Tap 21 fits my needs very well.  I now just have to decide if it's a deal breaker for me, or outweighs the fact that it fits my needs so well that negative.

  I'll take some time to meditate... while I'm waiting for some clients out.  Then I hope one or several exams will help me make my decision.

• Tecra S1: It is possible to upgrade the 80 GB HARD disk

  It is possible to upgrade the hard drive on my Tecra S1 on a 80 GB HDD +. If Yes, what is the maximum size and can recommend a disk.

  I found some info, and it seems that you can only use a 30/40 and 60 GB HARD drive.
  I guess that the 80 GB HARD drive will not be recognized by the BIOS correctly.

• Satellite A300-247 cannot find the folder of HARD disk recovery

  Hello
  I tried to reinstall my Vista home premium on my Satellite A300-247. I have buit - in the OS. I did it axactly according to manual (reboot - F8 - repair your computer-...) When I clicked on Toshiba HDD recovery system recovery tools wrote me this:

  "the recovery of the operating system is impossible
  File recovery HARD drive on the second disc of the first hard drive not found.
  There is no environment recovery valid HARD drive on this computer. "

  I would like to ask what do I do reistall my OS. I have no disk with OS and backup disc creation tool does not work.
  Y at - it an option to get my OS on DVD from Microsoft or Toshiba?
  If I use this tool to reinstall the OS, I will loss all the information on the D drive (Vista is on the C drive)

  Thanks for the reply

  Hello

  Seems that drive HARD recovery does not work.
  Perhaps something has changed on the recovery of HARD drive partition or recovery files has been deleted

  Usually it s always advisable to create a recovery disk in a first time. This should be done at the beginning and this recovery disk is always useful if something would go wrong with drive recovery HARD or with HARD drive

  Now, you can't get the phone because you don t have this drive and the HARD drive does not work

  What to do?
  Well, I think that you would need new control disc.
  You can do so here:
  https://backupmedia.Toshiba.EU/landing.aspx

  Welcome them

• Cannot access the PX1396E external HARD disk

  Just bought this external hard drive 1 TB.
  I Plug and Windows (xp) it detects and installs the drivers, or something.

  When I click on it for the Explorer, it says please insert disk into drive X.
  I plugged on 3 computers in different and same problem.

  I tried looking for specific drivers, but it doesn't seem to be any, not even in the toshiba Web site.
  What's up, anyone know?

  Thank you.

  Hello!

  > but is not recognized PPP
  Can you please explain this? It is unclear to me.

  But if the disc external HARD only on a laptop computer does not contact the other laptop manufacturing. Maybe the chipset driver needs to be updated or it s mainboard issue.

  As floh_1 said, you can try another cable. It s worth a try! ;)

  Good bye

• Start of the external (USB) HARD disk Windows

  Dear apple supports,

  I have install Windows 10 external HARD disk and connect with my Mac by USB. When I select the system startup on boot disk is windows 10. I got a message "you cannot change the diskette on the selected disk. The bless tool was unable to put the current startup disk. »

  How can I start windows from disk external HARD on my Mac (MacBook Pro (retina, 13-inch, early 2015), OS X EL Capitan v10.11.1)

  There are two ways to install Windows on your MacBook Pro. You can use the Boot Camp Assistant, located here details: http://www.apple.com/support/bootcamp/ or you can use a virtual machine, Parallels, Fusion or VirtualBox. Details are found on their respective sites.

• The use of hard disks > 2.2 to XP

  Is it possible to use the new hard disks with > 2.2 TB under 'old' versions of Windows (XP, 2000)?

  Andreas

  Any player should work under XP or 2000, but when you partition it, it will tell you to format it using an option for drives that are more than 2 TB