Ensuring a button does not get door

Similar Questions

• Minimize/maximize/close buttons does not...

  Minimize/maximize/close buttons do not work when you run Aero.  Whenever I change my Aero, reduce it and expand buttons work but the close button still does not work.  This happens with all the windows and I'll have to use the Task Manager to close the windows and I have to close the task with the exit button Manager because the close button does not work on either.

  Hello

  Thank you for using the Microsoft Windows Vista Forums.

  I will need some additional information to help you best.

  O if it works well before?

  Ø summers - get you any error message?

  O have changes made to your computer recently?

  In the meantime, follow the instructions below that may help you resolve the issue.

  Method 1:

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot

  Step 2: Enable half the services

  Step 3: Determine whether the problem returns

  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns

  Step 6: Resolve the problem

  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista

  http://support.Microsoft.com/kb/929135

  After checking the problem, turn the computer back to the Normal mode.

  Uninstall or update the program that is causing the problem.

  Method 2:

  Windows Live OneCare safety scanner is a free service designed to help ensure the health of your PC.

  • Check and remove viruses
  • Get rid of junk on your hard disk
  • Improve the performance of your PC

  Click on the link below for Online Virus scanner.

  http://safety.live.com/

  Check whether the problem is resolved.

  Method 3:

  Analysis of auditor of file system (CFS) that might help you resolve the issue.

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.

  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  3. at the command prompt, the following line, and then press ENTER:

  sfc/scannow

  When the analysis is complete, test to see if the problem you are experiencing is resolved. If the problem you are experiencing is not resolved, use the procedure that is described in the section "the System Restore tool.

  Follow the instructions in the link below for more information on scan SFC.

  http://support.Microsoft.com/kb/936212/

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• 100% width slide show button does not appear in the toolbar

  I work with the latest version of Muse - but when you are working with slide shows - the 100% width button does not appear in my toolbar.

  Align is their - but no key width.

  Where is he?

  Hello

  Please ensure that the image of the hero is selected in the slideshow, if you still do not see the 100% button then click on transformation and you'll get the button.

  Please look at the screenshot.

  

  It coould be 2 reasons for the same.

  1. monitor size is too small to display all the options.

  2 muse is not maximized. (Enlarge the window of muse and it will show the button here)

  Concerning

  Vivek

• By pressing the home button does not take me to the home screen of iOS 9.3.3

  I have recenly updated upgraded to iOS 9.3.3 and I noticed that pressing the home button does not take me to the home screen. The only way to get there is by using the creature of multitasking. (double pressing the home button) Also, some applications seem to freeze if turn my phone off and then turn it back on, or when I access it via the multitasking function. Can someone please help?

  Try a forced reboot. Hold down the Home and Sleep/Wake buttons at the same time for about 15 seconds, until the Apple logo appears. You won't lose anything.

  If a force restart does not help, try a system restore. First save your device via iTunes. Also import your photos on your computer and copy all the important data. Reconstruction of the support first test and test. If this does not help, you may need to restore as a new and reconfigure from scratch as the backup may be damaged. It is important to have your photos and your saved data separately from the backup. Here are the steps for a restoration:

  https://support.Apple.com/en-us/HT201252

• "Back" button does not work and lost bookmarks

  I followed the instructions that Firefox has been extremely slow. He said my favorites would be saved and everything should work as usual. However, I lost all my precious Favorites, and now the back button does not work. She is pale grey all the time, and itls drives me crazy, that I can't go back to the search page. I have to type everything in full again.
  If I can't change it, I'll have to switch to another web browser, after being with Firefox for more years than I care to remember.
  I liked using Firefox and have recommended it to all my family and friends.
  I'm very angry on my favorites, because I used these regularly and had a few coordinates links and important model for my sewing and knitting, as well as time-saving links. Now, I'm completely lost without them.
  If this isn't the page said it would be saved, then I would not have changed anything.
  It's very frustrating and annoying, after spending months, where I wanted and now he lost get it all because of the wrong information. I am very anxious.
  Lesley

  You can check for problems with the database places.sqlite file in the Firefox profile folder.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file
  • Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/

  You can see if you can restore bookmarks to a JSON or a compressed backup of JSONLZ4 in the bookmarkbackups folder in the "Old data Firefox" folder on the desktop.

  • http://KB.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox
  • https://support.Mozilla.org/KB/restore-bookmarks-from-backup-or-move-them

• Click right button does not not on Satellite P300 - 19 p

  Hello

  Monday, I bought a Toshiba Satellite P300 - 19 p.
  And I love it! : ^ 0 *

  Only today I turn it on and my right click button does not work! :-(
  I would appreciate any help that can get the button works again before I decide to drive to the store with the cell phone.

  Thank you
  Claire

  Hello

  what you man exactly when you say that the right button does not work? What do you do with it?

  Do you mean the external mouse or button of the laptop?

  You can reinstall the mouse driver. Search for the driver on the site of Toshiba for touchpad drivers or the manufacturer s Web site form the external mouse.

• Rescue E-mail button does not?

  I've forgotten the answers to my security questions, then I tried over and over again, until I made too many attempts and now I'm stuck on my account. There is an option to send me an email to my email of relief, but the button does not work and it will not send it to my email.
  I already checked and I know that I am interested in the correct rescue email! All I want to do is change my security questions, so I can finally buy my music.
  How can I reset my security questions when I'm stuck on my account?

  Try to contact support in the country where you are (and therefore the country on your account) to get the reset questions: Contact Apple for the Apple ID account security support

  If your country is not on this page, then try this form to contact Support: https://www.apple.com/emea/support/itunes/contact.html

  When they have been reset, you can verify that you save email address is correct, and if necessary correct, for possible future use: on your Apple ID - Apple Support email addresses

  Or if it is available in your country, you can substitute 2-step verification: frequently asked questions about two-step for Apple ID verification

• Why not Firefox 4.0 back button does not work since the homepage or google search?

  I've just upgraded to firefox 4.0 tonight, and the back button is not working properly of my homepage or certain types of google searches.

  I can reproduce this problem every time by following these steps:

  (1) open a new tab, and I get a blank page.
  (2) select the Home button. I find myself at http://www.google.com/ig
  (3) go to the address bar type in a new URI, and press return

  Now, I leave my home page and go to the new page, but I can't go back to my home page.

  Similar behavior happens if I do a search on google for the address of quick search in the upper right.

  (1) start a new tab.
  (2) enter a search term and press enter
  3) click on one of the links to research and you transition to the new page, but the back button does not work.

  It works fine if I do something like:
  (1) open a new tab.
  (2) enter google.com in the address bar and press to enter.
  (3) do a GOOGLES search arae.
  4) click a search result link.

  This works very well for me.

  In my case, I turn off the Add McAfee SiteAdvisor 3.3.1 and the problem goes away.

• Volume up button does not work like the shutter of the camera

  I have an iPhone 5 with iOS 9.2.1 (13D 15). The volume up button does not work on it like a camera shutter. I think that it used for, and iPhone to my wife 6 with the same iOS version works fine. It is a problem, because I am using this phone with a stick of selfie, which triggers photos by simulating the volume press up button, so it doesn't work at all for me. The physical button works - I can control the volume with her settings. And when I try to use the stick selfie, I get the volume until the display on the phone, so I can see that the signal of the selfie stick is received correctly by the phone. And the stick of selfie works with my other phone that is not a problem with the volume up button.

  Work began after restarting the phone. So it's a bug to Apple report, the solution is to reboot the phone.

• Laptop computer HP mouse left button does not

  I'm not a computer person, so I apologize in advance if I get words wrong. Information about the specifications are the HP Support Assistant.

  I have a HP Pavilion laptop G6 (product number A4A93UA #ABA)

  I am running Windows 7 (64-bit)

  My microprocessor (if it's important) is an Intel (r) Core i5 - 2430 M CPU @2. 40 GHz

  I have 4 GB of system memory

  The pointing device is Synaptics PS/2 Port TouchPad

  I hope that I didn't miss something important.

  I'm having some problems, mainly the left button of the mouse does not work. I searched and searched for an answer, but I can't seem to find a. The touchpad itself works perfectly. I can double-tap to click, press on and drag the highlight, etc.. The right button of the mouse works fine as well. It brings up a menu each time as it is supposed to. The left button on the other hand, does not at all. I had the computer for about 6 months, so my warranty is still in tact. I was hoping just to find a simple solution, before passing through the process of return to HP or Best Buy.

  At first, the left button seemed to lag. It works sometimes and not others. Then it stopped completely (all within a period of a few days), what happened a month ago. Since then, I was looking for answers and dealing with just. even if it is super boring!

  Another thing I noticed is around the time that the mouse itself has stopped working, my Start menu was allowed out entirely. When I searched the HP Support Assistant, he didn't. I had to go through the program files for access. Nothing is displayed in the start - menu it is empty with the exception of Norton, Internet Explorer, Google Chrome and the menu accessories (but inside she, notebook, Run and command prompt, are the only things that appear.

  So overall - my Start menu is almost empty, and my left mouse button does not work.

  I tried to install the new drivers, but no luck.

  I mean it's a hardware problem, but the thing on the part of the menus disappearing makes me wonder if it's a virus. I would try a Windows CD as Hiren PXE environment and see if the mouse works with different software. But it's a longshot and the likely answer is that the mouse circuit is bad. The only other thing you could try is a factory restore.

• Why the STOP button does not stop this vi?

  Hello

  I took an example of Labview 2011 called "soul hollow period-Low Freq 1 Ctr.vi. This example vi measures one period, but, I want to measure the period over and over again, so I put it in a WHILE loop, but the STOP button does not stop at the vi.  Instead, I have to use ABORT to stop the vi...

  How can I stop this vi?

  Dave

  It does not replace the time-out.  The while loop is a separate beast from the meter reading.  You wouldn't want your loop due to always make you miss the error messages, would you?

  Usually just clear the error message of time-out on the counters.

  You get the message twice because the loop runs in fact twice.  The first time the stop button is read as false as soon as the loop begins.  Then you click on it.  At the same time that it takes 10 seconds for the timeout counter to occur - when he does it gives you the error.  Then, the loop runs again.  This time it reads the key stop as true, because you clicked on it during the timeout of 10 seconds of the last loop.

  A time loop allows everything inside to complete execution before the end, then you will have to wait for an another timeout of 10 seconds to occur which produces another error.

  Unless you need a measure of very, very low frequencies I set your time-out to a more reasonable number and simply erase the mistake if it matches 200474.

• Pavilion DV6 6c14nr: Wireless button does not work

  Has taken the plung and improved my DV6 Win10 laptop to see how it works.  Had to do a clean install, because no upgrade would not work.

  After installation, the wireless button does not work.  LED stays red all the time, and when I push it, it activates / deactivates the airplane mode.

  Check the support site HP for this PC, downloaded and installed the driver wireless Win8 button (sp59835) and it does not work. Button LED stays red.

  Searched these forums and found another driver (sp64043) from the button for Win10 wireless driver and installed it.  Still does not work.

  Information on equipment is: ACPI\HPQ6001\2 & daba3ff & 0

  The details for the wireless button said drivers this devide requires additional installation

  Unless I can get the wireless button to work, I'll be forced to go back to Win7.

  Help, please.

  UPDATED - so others find this post know what works!

  Restored image backup Win7.

  Disconnected the LAN cable and activated the wireless button.

  Win7 removed and properly installed Win10.

  Wireless button works NOW!

  So basically, if the wireless is turned off before the Win10 install, it remains disabled and then nothing will allow it.

• burner does not get recognized

  The computer is HP pavilion 7955, XP home edition.

  There are two features of optical disc.

  The first is a HP cd-writer. This device does not get recognized and does not appear in my computer screen. When the button open the tray, there is no green light or the drawer opens.

  The second is a DVD-ROM HITACHI GD - 8000. This device is recognized and appears in my computer screen.

  A floppy drive A appears on the screen of my computer, although there is no floppy drive.

  Hello

  · The CD burner has been recognized before?

  · Do you remember any changes made on the computer?

  You can follow the steps in the link below and check if this can help: your CD-ROM drive or DVD drive is missing or is not recognized by Windows or other programs: http://support.microsoft.com/kb/982116

• Q button does not work on my keyboard, I think it's a virus

  Original title: virus Q

  My q button does not work. It is not a keyboard problem. I think it's a virus. because it happened a second time.

  When it happened the 1st time I format my system and I get rid of my problem. Now after the format I couldn't solve my problem.

  and q is automatically typed continuously in every 1-2 minutes. This also works when I type the password for the bios or operating system password. I have to face several challenges in typing. It works in all windows operating systems. Please solve this problem.

  have you tried / run your AV prog? also, run free

  http://www.TechSpot.com/downloads/4716-Malwarebytes-anti-malware.html

• The scan button does not work on Windows XP Media Center edition 2005

  Name of the printer: hp psc 1350 all-in-one

  Hi, this is happened since I reinstalled the operating system with an OEM disc, removing all the hp stuff. I got a new OEM drive that comes from hp (I think... well hp stuff works now) but the scan button does not always work. The old record was kind broken.

  I don't mind, but it will be useful, if it could be repaired. Don't want to do something big, would rather just not fix that to do something does not.

  Note: Scanning works, but I have to look somewhere else (e.g. opening scan in the Panel)

  OK, that explains why the scan button does not work.

  The complete software is required for the scan button to work, it is not a feature of the base software.

  Be sure to follow the steps below in order to get is torted:

  1. Unplug the USB from the printer.
  2. On the start menu, enter the HP folder. and follow the link to uninstall to remove the current software.
  3. If you don't find it there, go into control panel > add or remove programs, and remove any software installed HP PSC 1300 series.
  4. Download and install the full feature below:
     http://ftp.HP.com/pub/softlib/software10/COL8901/MP-23606-3/gc_w01_ENU_NB.exe
  5. You will find the Director of HP under the HP software. If you have problems using it, make sure you install the following hotfix:
     http://ftp.HP.com/pub/softlib/software8/COL17377/OJ-46104-1/CIT207355-HPCOM-patch-V8.exe

  Kind regards

  Shlomi