Enter Netwrking home network password problem

Similar Questions

• Comments on E3000 network / password problem

  Hello

  I have the E3000, I want to use the comments for a wireless network.  The use of Cisco Connect Add a password to the Guest network. The guest network appears then as open or not secured on laptop and phone.  I renamed my network and changed the master password and nothing seems to help, comments always appears as not secure or open. I tried Cisco cat and they were no help.

  Any ideas on how I can get the password works on the network of comments?

  Operating system Windows Vista SP2

  Using Cisco Connect
  Firmware: 1.0.04)is build 6

  Thanks for your help.

  Jay

  Assuming that access as a guest E3000 works like that of the E4200 then this is normal.
  The network appears as "unsafe", but to actually browse the web (or access other resources that can be activated for the guest network) the user must enter the password for the network invited in their web browser.

• Microsoft Shared file forgotten small home network password

  I forgot the password for the network.  How to do this?  There are 2 computers that are connected between them, HAL and PE.  Protocol of AGREEMENT has access to files on HAL, but not the other way around I think.  Lost the password that allows slack to access files shared on HAL.

  Hello

  Maybe this can help, http://technet.microsoft.com/en-us/library/cc747350%28WS.10%29.aspx

  --------------------------

  If it's a problem of general permission.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . All the users who are allowed to share need to have an account onall computers that they are allowed to connect to.

  Everyone is an account, that means a group of all users who already have an account now as users. It is available to avoid the need to configure permission for each on its own, it does not mean all those who feel that they would like to connect.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• I need to reset my password on home network

  I was previously running vista home on my laptop. It crashed. The technology that has repaired the computer for me upgraded to vista Ultimate edition. The laptop doesn't remember my home network password & not more than I have. I have to use a wired connection, access to the internet. Does anyone know how can I reset my network password?

  You either go into your router and see if the password is availabe/visible, or reset your router to the factory settings and set up the network again.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

  Read theBANNING of cracking of passwords information tools information provided in these forums in the thread above posted byBill fill MSFT, moderator

  See you soon.

  Mick Murphy - Microsoft partner

• When I try to connect to my Netgear router I get an error that "the network password needs to be 40bits or 104bits depending on your network configuration."

  Hi, I have an Inspiron 6000 labtop Yes it's old but it works :). I also have a Netgear wireless router and I have passwords on my wireless connections and I know of course that the password. When I try to connect to the router wirelessly on what he asks the password as usuall and I type it, and then click Enter. After that, a message appears saying "the network password needs to be 40bits or 104bits depending on your network configuration. This can be entered as 5 or 13 ascii characters or 10 or 26 hexadecimal characters. "How can I solve this? Help, please!

  original title: wireless network password problem!

  Hello

  Connect the computer to the router with a wire.

  Connect to the menus and change encryption and password length in the privileges of guide.

  Connection with wire to the router and working with the menu should be explained in the manual of the router.

• I can not connect computer vista laptop to my network home, but I can connect to other networks. Other computers can connect to my home network very well. This can be corrected?

  My laptop runs Vista and I've not had problems connecting to my home network wireless until a week ago or not.  Then, trying to connect, I see other available networks, but not my own.  When I try to connect manually, it says that the network already exists.  Other computers, macbooks, are able to connect to my home network without problem.  I am able to connect to a network on my laptop fine unsecured wireless.

  I could 'solve' the problem or get reconnected with a restoration of the system to an earlier date, but it only lasts a day or two.  I searched for another fix and tried many things, including to reset the router, remove my network, and then reinstall, etc, but can't seem to get this to work as if it were - automatic connection as the first network.

  Any help would be appreciated.  Thank you.

  You have rebooted the router and the pc at the same time?

  You run the IPCONFIG / all from a cmd prompt can and download a preview of the output to a file share services like rapidshare and put a link to it in your next post?

• "Enter network password" popup will not stop appearing, how to stop this? Outlook 2007 audit has aol.

  OK, I know that this question was asked before here and other places, but I tried a lot of things and still cannot get him to stop.

  I use Outlook 2007 to access my aol e-mail account. Until recently it has been works well with none or very few problems. All of a sudden this week, the window 'Enter network password' guard chronically arise with all fields filled already, but you will need to click ok to remove. This happens once in a blue moon in the past, maybe once every 3 weeks to a month and then happen not for awhile. But from this week, it occurs once every 5 minutes about an hour every day. (Has happened twice since I started typing this so far.) This is incredibly annoying doesn't even begin to describe. For more far to annoy me, I have a rule to configure in Outlook where some emails get sent to my work address while I'm not home and when this box appears here at home while I'm at work, nothing doesn't get passed, nothing happens anywhere because I'm not here to click ok in the darn box!
  OK, to cut to the Chase, I have Windows XP with Outlook 2007 here, and I checked my aol email. All parameters have been controlled and tested and is exactly the same as when it was working fine. Other things that can help to know, I have McAfee Antivirus on the computer and the router wireless Belkin F5D8235-4 low. I had McAfee antivirus for many years without any problems and I got the router hooked ever since November 2009 with no problems until now that is.
  Here is what I tried so far, all have not helped at all: (I thought that I would tell you which has been tried and didn't work, so we don't waste time on them).
  1 has created a new Outlook profile. Did not stop the pop ups.
  2 Ran Outlook in safe mode for non-Microsoft services would not be executed. Did not stop the pop ups.
  3. saved registry and the information of the user account deleted from the options of password subkey, and then reinstated "Protected Storage System Provider. Did not stop the pop ups.
  4. disabled in McAfee messaging protection. Did not stop the pop ups. (Just got a new one! Ugh.)
  5 Rebooted/Restarted router. Did not stop the pop ups.
  I'm currently at the "I got Nothin'" point about what should be judged then.
  Anyone has any idea what this might be outside what I already tried?
  I am altogether strung here and it drives me crazy. Anyone have any ideas?
  Jim.

  Update for me.
  Because I changed my e-mail verification of the intervals of 5-10 minutes, there was a considerable improvement in this issue. For a while it has virtually disappeared, it was like the good old days when it happened almost never.
  A few week days last the problem returned with a vengeance, as bad as when it reached its maximum when I started this thread. But I went on google and found a lot of internet chatter, suggesting that it seems to be a question of aol - across the network to an end, given that many people in the country had the same problems. So, it looks that I have would have been doing the pop-ups regardless.
  It seems that to subject the week last, aol themselves have had major problems to their e-mail systems based on internet comments there from other customers, so by doing this problem much more difficult to solve since now you know exactly what is the first cause pop-ups until aol gets their end of it solved. I can certainly tell you that raise the time intervals to send/receive 5 to 10 minutes doesn't seem to go very far to solve problems with pop-ups. Even though I'm still trying, here and there, I think that those that I received lately have been due to problems at AOL more so than mine, based on reviews other aol users. I hope that I may be at the end of the tunnel on this subject but thanks to what is happening to their end (aol), I can't say for sure yet. I'll keep you posted.

• Problem with my Acer laptop does not connect to my home network.

  Hello

  I had a problem with my laptop. The laptop does not connect to my home network.

  I found the wireless network, but when I hit enter after entering the password (), suddenly a pop up come that said "Windows could not connect to the network". The laptop connects well with portable hotspot in my phone (3 G Tethering). But my phone (Samsung Galaxy Pocket) connects to the home network.

  My specs:

  Acer Aspire 4250 ongoing Windows 7 SP1.

  Dlink DSL-2730u (secure wifi with WEP 128 bit key)

  Please solve my problem...

  Original title: problems with my Acer laptop

  Guess - encryption levels are the same. E.g. is your set of router that you use WEP only but your PC configured to use WPA only? http://Windows.Microsoft.com/en-HK/Windows7/set-up-a-security-key-for-a-wireless-network

  If this is the case try to configure WPA2 or WPA rather than fall to WEP.

  Check all the other related settings as well. knowledge is the router using MAC filtering, are there available IP address so that it can allocate? (some routers are possible to limit the amount of IP address, they can allocate at one time).

  Second, if it does not remove the encryption all and see if it connects then. JUST AS a TEST, do not leave it.

• Persistent problems with wireless home network

  Hi, the problem started two weeks or more ago, when after the connection to the internet easily using our wireless network connection, my computer began to say that our domestic network was unidentified, then studied by troubleshooting my self but do not really understand the information the computer indicated to me. As it was a problem of the internet I contacted our local provider broadband, they looked like the line and the service was absolutely perfect and to confirm this router computer of my father in the same cable network has internet connection easily as it was my mom who was using the connection via the same router wireless cell phone.
  Following the instructions of technitians I have tried to manually enter internet addresses to see if that would help the internet connection, it did. So I thought that the problem has been resolved. I had the use of the internet that day and everything was fine until I restarted the next morning. The problem reappeared. So I called my internet provider again, this time I'm sorry to say to a girl rather too quickly diagnosed that I had a virus to uninstall Google chrome and reinstall a different browser... That didn't make sense to me, but I tried some sort.  So I moved my office tower and all the bits in one place in the House were we could conect it to the router with an ethernet cable followed his instructions then moved the computer to its original position but still no internet connection and still this problem 'identification '. I turned off the machine and tried again the next day. Start by running the troubleshooting of network problems, this time I looked at the detailed report which curiously stated that the computer had difficulty oscillating between two somethings (sorry don't remember the detail correctly is days ago)
  So I called my internet provider again and I am a helpful young man, read him the information and examined the reports that they had written about the problem in the days preceding. I followed his instructions looked in the network sharing Center, settings changed and added in manual codes for the internet, turn off the router for 10 seconds or more and then restarted, this time with not even a temporary success. We tried a few things but I always got the same contradictory message in the dialog box in the lower right corner, where it showed I was connected to the local network not connected to the internet, when I opened the network sharing Center from the local network to the router would show that 'Identification' and the conection to the internet would be marked with a cross. I managed to pass my network profile is for some reason any defined to the public rather that home and we were able to change it (even if it wasn't easy)
  So I was told it was probably a driver issue, I was told I might need check the updates of my license on this operation the technitian and I also saw the site of netgear, that there was a potential conflict between Kaspersky and the netgear driver, so I need to uninstall my Kaspersky anti-virus stuff and the old pilot , down load and install the new drivers and then reinstall kaspersky. I followed it. (Movement of the tower and all the bits in place in the House were the ethernet cable was available).  I found an updated driver, uninstalled downloaded kaspersky and run only the driver installed Kaspersky again. Everything seemed to go well and I even plugged in the wireless adapter connected to the internet through that and disconnected the cable... things were going well.
  So I turned off the machine and carried over into my room where I turned on once again. The problem reoccured. I thought it was time to communicate with kaspersky. So I turned the computer off and reduced to the ethernet cable. Connected a Kaspersky contacted by e-mail, they were quick and I was asked to run a program that logeed my information system. I did this and I told them I thought it might be a conflict between the driver and their softwear, they have looked into it, asking me to run a misuse of this program and the results by e-mail. Once again, I've followed the instructions and took notes, but no problem was found. They showed me how to configure my kaspersky firewall to allow access to the networks. It's when I was doing that I noticed that the computer had five ads of our home network, so I put all the profiles of their trust, apply changes and tested to see if it would work. On the wireless internet in the office where the ethernet cable and a router are by train, it's good, it works. I connected the wireless network and disonnect the ethernet then on the internet and there is no break in service. But if I shut down the computer and set up in my room at 12 meters, it won't work with signal strong (4 / 5 bars are green).

  This morning I watched the windows firewall settings and changed some of them to see if that makes a difference. but none.

  I'm trying hard to think about this problem but I'm getting nowhere fast, I know just enough. I just tried pluging in the wireless network adapter again, but there is no wireless network connection now and no internet connection:

  After having tried downlaoding a new driver and this has not fixed the problem after having only tested the wireless signal is strong enough for good internet connection to my mother's computer in my room, I'm stuck. I looked on the netgear site and follow their advice, but it's really a night Mare!
  I also noticed that somehow, we put in place five versions of our home network, I wonder if there is some confusion computer... I looked into the idea of the removal of the networks, and it seems that you can not do. I am trying to back up my files, uninstall everything and re - build my computer from scratch. If there is something else I should try before taking this message please drastic measures me ASAP.

  Hello

  1. What is the operating system installed on your computer?

  Please follow the steps from the link below.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• A window opens all the minutes titled 'Enter Network Password',

  Original title: help please!

  I am running Windows XP.  My problem is the following:-a window opens all few minutes entitled "Enter network password", it may be either of my current ISP or the previous one which I did not have long.  In this case no matter what I do on the computer.  Can someone help me get rid of this?

  If you no longer use a modem, you can safely remove all access to remote connections. Proceed as before you make the Connections tab and remove all connections by modem listed. I hope your problem will disappear. I can't explain why with "never dial" selected, you still get those dialups. Maybe you have some malicious software trying to get an internet connection in this way?

  Do a full with your normal AV and then scan also with scanners to demand free MBAM and SAS. You can always delete them after scanning if you wish.

  Tricky

• The network password needs to be 40bits or 104bits depending on your network configuration. This can be entered as 5 or 13 ascii characters or 10 or 26 hexadecimal characters

  Hello

  My operating system is window XP and my D-link wifi I am connect the wifi type password

  I get the error message...

  (The network password needs to be 40bits or 104bits depending on your network configuration. This can be entered as 5 or 13 ascii characters or 10 or 26 hexadecimal characters)

  Another wifi connect operating system works very well for example... Vista or window 7 only problem window XP

  Shafique.Cheena

  Hello

  Glad to know that the question that you were before face is now resolved. For the question you're faing while changing the name of the computer to the domain, I would say that you check out the link and follow the steps.

  How to change a computer name, join a domain, and add a computer description in Windows XP or Windows Server 2003

  http://support.Microsoft.com/kb/295017

  If the problem persists, post the question in the Technet forum that would be better suited. Check out the link.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• "Enter network password"

  As I added a Yahoo email account for my wife, I get "Enter network password".  I don't know what password I'm supposed to enter.  I tried to enter my password that I use to access my Verizon account as well as my Yahoo account, but none of these work.  In the e-mail configuration, everything looks OK.  I'm lost and this pop is extremely annoying.  I need immediate assistance.

  See if this helps: http://support.microsoft.com/kb/290684 Brian Tillman [MVP-Outlook]
  --------------------------------
  https://MVP.support.Microsoft.com/profile/Brian.Tillman
  If a response may help, please vote it as useful. If a response to the problem, please mark it as an answer.

• Resistance problem for the wireless network password

  I have a v300 tablet, when I try to connect to my wireless network and I put the password wireless I get an error that reads: "the network passwords must be 40 bits or 104 bits according to your network congifuration, it can be entered as 5 or 13 ascii characters or 10 or 26 hexadecimal characters."
  Any ideas on the problem, what to do or how to fix it?
  • .

  Try the following: Wireless Networking Troubleshooting Carey Frisch

• Need to connect to the home network wireless - Windows XP Pro - error with network password - needs to be 40bits or 104 bits...

  I have a new laptop at home which has windows xp sp 2 is installed.  I am trying to connect to my wireless network.
  I get the following error;
  The network password needs to be 40bits or 104bits depending on your network configuration.  This can be entered as 5 or 13 ascii or 26 hexadecimal characters.

  I gave my father a new laptop computer this fall and he gave me one that had given him his friend... I've never worked with XP Pro...

  We have several other phones on this account wireless at home.

  You try to login with the wrong encryption method and you have this implemented extremely secure wireless network.

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine. The first thing to do is to change the default password because * all * known default passwords for different routers.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar. ;-)

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). Most computers purchased during the last 4 years have the wireless hardware that will support WPA2-Personal (also known as WPA2-PSK). This is the desired encryption level. If your wireless hardware is older, use WPA. Don't use WEP, because who is easily broken within minutes. So go ahead and set the Security Mode WPA2-Personal. Do this and enter a password. For example, you could use the password ' here be dragons, beware you scurvy dogs! The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the ethernet cable and wireless of the computer should see your new network. Enter the password that you have created (exactly as you wrote it with all capital letters and punctuation) to join the network and start surfing. MS - MVP - Elephant Boy computers - don't panic!

• I have problems wireless on my Acer laptop which has Windows Vista. I am able to connect to my school of university network and used to connect to my home network.

  original title: Wireless on the Fritz

  I have problems wireless on my Acer laptop which has Windows Vista.  I am able to connect to my school of university network and used to connect to my home network (both are networks limited requiring a password or log in).  However, last week my computer stopped connecting to my home network (no one else has this problem with the home network).  I tried to fix the problem, but my computer says that "Wireless association failed because Windows did not receive response from the access point or wireless router."  That said also thatthe connection "(my wireless network)" has been cancelled.  This is perhaps due to a timeout or user action. »

  The only different thing I did last week was click option at my University 'connect long-term' instead of 'connect short term' to their wireless network.  Maybe who has messed up my settings?  That's what my University said of his record long term: "students, faculty and staff also have an option to easily record their computer (or other wireless devices), so that it is not necessary to authenticate each day they connect from the network wireless campus, to resources outside the University.»  However, these settings are saved on their network (I can access it online from another computer), so I think it is unlikely that he messed up my settings.

  I don't really know what the problem is.  Any ideas as to what I can do?  I don't want to reset my computer everything.

  Thank you!

  Hello

  You can view these methods:

  Method 1:

  I suggest you to disable any program of security on your computer and check if it solves the problem.

  After reviewing the question you must reactivate the security on your computer program.
  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.
  Method 2:
  I suggest also allows you to check in SafeMode with network.
  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
  Method 3:
  I also suggest you to check the settings of the router firewall.