Entity and combinations of generic dimension members
Hellois it possible to limit the generic dimension using members of the entity members?
Entity
-All
-Org1
- And Org2
Project
-All
-Project1
-Project2
-Project3
And I like combinations
ORG1 - Project1
ORG1 - Project2
And org2 - Project2
And org2 - Project3
Hello
Do you mean "restrict" such that they do not exist? If so, then I would ask why you were trying to do. If it was to prevent some users from entering certain intersections, then you might find that you can simply restrict the dimension of project members. This works of course if users 'Org' was only put into service.
Another way you could restrict what you see the shape however perhaps to show only the members where blocks are created, and to have a value of '' parity '' in the intersections of Member you wanted shown (this will not be visible on the form of course), such that they would appear on the form. This would remove effectively any possibility of someone to enter data into the intersections that you didn't want to conclude.
Warning of this, of course, would be that the Dimension of the project will be in the grid and that he could not be on the Page/POV of the form...
Someone else?
Tags: Business Intelligence
Similar Questions
-
Removing the entity dimension members
Hi all
I had only one requirement where in I need to remove all members of the dimension entity and need to recharge with new members. What is the best procedure, and what precautions should I take?
I need to remove a reference for the Member of all dataforms before it is deleted?It all depends on what tools you use and whether it is classic or EPMA.
If you want to remove all the members, then you will need to ensure that they are not referenced anywhere in the application example forms and workflow.See you soon
John
http://John-Goodwin.blogspot.com/ -
List of members of generic dimension in HFM 11.1.2.2.300
What is the syntax for a list of members of a generic dimension in HFM. Generic dimensions trying to write the 'old' way that works for all of the nothing does not work.
The dimension is called C3Network, Alias Dimension: AllNetworks, abbreviated name: NTW
That's what I tried:
Void EnumMemberLists()
Dim aC3NetworkLists (1)
Select HS case. Dimension
Case "C3Network".
aC3NetworkLists (1) = 'Test '.
HS. SetMemberLists aC3NetworkLists
End Select ' HS case. Dimension
End Sub ' EnumMemberLists()
Void EnumMembersInList()
Select HS case. Dimension
Case "C3Network".
Select HS case. MemberListID
Case 1 ' test
HS. AddMemberToList "R16".
HS. AddMemberToList "W16".
HS. AddMemberToList 'D1 '.
HS. AddMemberToList "R15".
End Select ' HS case. MemberListID
End select ' HS case. Dimension
End Sub ' EnumMembersInList()You'll want to use the Alias for this.
-
Other ODI and HAL, is there another way to download Dimension members?
Hello
ODI and HAL, y at - it another way to download Dimension members in planning 9.3.1 describe? I know planning 11.1.x has a utility to allow you to quickly create a preview, but is there something similar in the 9.3.1?
Thank you.
DavidYou can cut and paste INTO the library of EPMA dimension, but you certainly can not copy from Excel and paste into EPMA.
-
Applying a secondary sort order of dimension members?
My organization is running short 3.1.1 inexperienced Manager. We currently have some of our dimensions (for example, "product.brand") configured to have their members to be ordered by refinement (number of visits) County, in the apps / file /config/api_input/schema.csv (appname). (So in the navigation on the left of the application of our trade, the users see this dimension members ranked by number of hits, top-down, for the current slice of the projected product catalog.)
The company asked if we can apply a secondary sort order, such as the dimension is always sorted by number of hits, but among the members of the dimension with the same number of hits, a secondary sort of alphabetical sorting criteria is applied between these members.
Is it possible to do through short configuration?
Thank you
-Jon
Not possible out of the box (you can have some sort of combination for the records, but not for dimension values). It should be simple to do in your web application layer, create a comparator and compare() compare on DimVal.getProperties () .get ("Dgraph.Bins") well first of all, and if it equals compare on DimVal.getName ()).
HTH
Michael
-
Workforce Planning - use of generic Dimensions in the variable Designer
Hi gurus
I am currently working on an application of workforce planning.
I'm working on a script by transfer of an employee to a cost center to an entity in another Centre of cost in an entity.
I then go to variable designer to modify the variables 'DepartmentFrom' and "DepartmentTo", in the hope of seeing the Dimension cost center and entity
Then, I discovered that I can't select a generic dimension, in which my dimension 'Cost Centre' is a generic type.
Only the standard types are available; Account, currency, entity, period, script, Version, year.
Is it possible that I can make a generic dimension available when selecting the dimension type in the variable Designer?
Please help, this may affect my dimension model in my application of workforce planning.
Thank you!You can create the Variables to the application or database level instead of create Global Variables.
At the level of the application or database, you will get the option to select the dimensions of the custom in the Variables.
Kind regards
Malezieux -
How to export dimensions members of planning to a flat wire
Hello
Any body please let me know... How to export a specific dimension members (E.g. Entity) of the planning in a flat file.
Thanks in advance,
Kind regards
RandyHi Thr,
You can try one of the below one:
(1) use excel add and drill to the bottom of the hierarchy of entities
(2) planning and essbase have the same hierarchy, why not use an extractor of contour in the essbase
(3) Sql query on the realtion to correct hierarchy table
(4) ODI
(5) the file EPMA generator from a planning application can be used to take directly extract EPMA (if you EPMA)See you soon...!
-
Consolidation of generic dimension
Hello
After the issue, we have:
We have a generic dimension on the data form. All members whose parents are StoreData. I use to calculate the parent business rule Calc Dim...
When I have 40 to an input member and run calculation script the parent gets consolidated and stores the 40. But when I delete my 40 and initiate the calculation of the parent company retains the value of 40.
Any idea?
Thank youHello
Just to be clear you set the Member of #missing and the aggregation does not the parent #missing.
If so it may be you must assign global missing, try adding the following to your script SET AGGMISSG ON.See you soon
John
http://John-Goodwin.blogspot.com/ -
HOW TO LOAD DIMENSIONS / MEMBERS IN ESSBASE ASO REQUEST
Hello
We are running Oracle EPM 11.1.2.4 and created with success the planning application help EPMA workspace, it is necessary to create a reporting application. We have created a new application of ePMA workspace as essbase ASO and have dimensions of base construction and members of epma itself, the need is to have the same dimensions / members in the application (planning and ASO). My question is:
How to bulk load dimensions / workspace members in Essbae ASO using EPMA / EAS?
Thank you
Concerning
Shahrukh
You must use the same method to load the members that you already use in EPMA, if it's a pure Essbase applications and metadata should be loaded for EPMA and not through the Regional service.
If you already have applications of EPMA, then you would use the same method.
See you soon
John
-
Cannot search the Dimension members in the Validation rules editor
Dear all,
I installed FDM + Foundation + HFM + Essbase + planning 11.1.1.3
I stacked with the following problem:
When I try to get the dimension members in the validation rules editor,
I am - Web page message * 'data for this dimension not found' *
I can't select the members here, I selected in activities-> map
Can someone help me look for my existing members?
Best regards
SiarheiHello
Are you sure that you associate dimensions "VALxxxxx" in the workbench to your valid dimensions within Essbase?
VAL dimensions are down at the bottom of the list of dimension for the adapter Essbase... and ValEntity, ValAccount, etc.Thank you
-
Creating shared Dimension members to the planning of the period
In my application of planning for any member (including zero), I see only the following options for member properties:
Store,
Dynamic Calc
Dynamic Calc and Store
Never to part
Is the above normal?
If so, how can I enable the Member to share? In particular, I want to share the time dimension members. Is it still possible?OK this is what I did on the 11.1.2 classic sample planning app
Administration > manage the Dimensions > period
Add a child to the time Member
Name = CustQ1
Add a child to CustQ1
Name = Oct
Dtx200 = sharedSee you soon
John
http://John-Goodwin.blogspot.com/ -
Cannot load dimension members in the planning by ODI
Hello Experts!
I'm new on ODI and I use ODI 10.1.3.5. I created my first ODI interface to load dimension members of account of a CSV of test with only 4 records in Hyperion Planning 11.1.1.3 following instructions of John's blog. Hyperion Planning and model file setbacks were ok, so I built the interface and run using no Agent but no lines have been uploaded in planning. The newspaper of the operator tab folder 7 - integration - statistics report execution gave the following message is displayed:
org.apache.bsf.BSFException: exception of Jython:
Traceback (innermost last):
"< String >" file, line 2, in there?
Planning, writer load summary:
Number of rows processed successfully: 0
Number of lines rejected: 4
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.k.a (k.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting (SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders (SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders (SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt (SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt (SnpSessTaskSqlI.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask (SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep (SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession (SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand (DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute (DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i (e.java)
at com.sunopsis.dwg.cmd.g.y (g.java)
at com.sunopsis.dwg.cmd.e.run (e.java)
at java.lang.Thread.run (unknown Source)
I would be grateful on any indication as to what could be done to solve this problem!
Thank you very much in advance!I would try to restart the application web planning to see if it clears the error message.
See you soon
John
http://John-Goodwin.blogspot.com/ -
Hi all
I want to calculate the period Dimension members January to December only.
I have some dimension members more time to level 0.
If I use @LEVMBRS("Period",0), it will be calculate all members of level 0 in the dimension of time. But I want to calculate only from Jan to Dec.
Can I use Jan: Dec in education FIX?
Thank you and best regards,
Konrad.Hello
Yes, you can use them in trouble
Fix(Jan:DEC)
.....
ENDFIX
See you soon
John
http://John-Goodwin.blogspot.com/ -
Planning error object is locked when loading of the dimension members by HAL
We have a problem loading a dimension members in a planning application. We get the error message Error: com.hyperion.planning.ObjectIsLockedException: the PKI object is locked by another user.
We can load other dimensions, and we do not have the sessions/users in the application.
We have also restarted the planning service.
Has anyone seen this problem before?
Thank you very much
/ Henrik WaernesYou should be able to clear the lock by restarting the web application Planning Server.
You can also take a look in the HSP_LOCKS table.
I hope this helps.
SEB -
I've recently updated to macOS Sierra 10.12 and scanning to HP computer software cannot be located when I open the HP utility.
I can't find a further recommended HP software for my device other than El captain in operating system online.
If I try to scan through preferences systems for printers and Scanners I can open the scanner, but I can't create a PDF combining into one document - it cancels the procedure after about 2 pages!
The scan HP Destinations 'PDF for Adobe Reader' is red 'could not locate the target application that might have removed or uninstalled. File format = "PDF".
How can I get that back?
Thank you
Hi @JOGL,
Thank you for joining the HP Forums!
I understand that computer analysis can not be activated as well as the scan and combine them into a single pdf document. With your printer HP Officejet 7610. I am pleased to see that for you!
At this time for this model. There is no software and drivers for Mac OS X 10.12 again, given that the operating system has just been launched, it could take some time. For the time being, you can try to use HP Easy Scan to see if that can meet your scanning preferences. In otherwise, all we can do is wait for the software and drivers to be released.
If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.
Thanks for posting and have a nice day!
Maybe you are looking for
-
I am interested are why some letters in gray bar address?It works well, but it interests me.Thank you
-
HP Officejet Pro 8610: Problems scanning from Adobe to the adf on printer
-
Access Windows Explorer for pictures
When you go to 'Pictures' of the main sidebar it takes 10-15 minutes so that they appear on the screen. If I try to access the screen, I get a message saying "Windows Explorer is not responding". However, I can access the same images immediately via
-
should I really a complex login password?
I use a laptop while attending night school to get a higher degree of security of Information systems. One of the things that briefly covered in course of last night is on the recovery of the lost Windows login passwords, as well as their reset. Give
-
where to download the windows xp home edition cd
My OS has been corrupted, and I could not repair the installation. I do not have the cd with me, but the license is in my laptop. I want to download the cd (or iso image) so that I can fix my laptop OS