Entrance to continuous process

Similar Questions

• Microsoft Update 3 of 3, has not finished loading. The computer automatically restarts and repeats the same continuous process

  original title: Microsoft Update 3 3 loading is not finished. The laptop restarts itself and repeats the same process continuous - not a techie - please help!

  My laptop has vista, I lit and tells me that Microsoft Update 3 of 3 has not finished loading. The laptop restarts automatically and repeats the same process continuous - I can't access the start menu or anything - what should I do?

  char1822,

  The link below has options to solve your problem of loop.

  http://support.Microsoft.com/kb/949358>

  05/23 / 1107:53: 57 pm

• USB audio interface with several input channels

  If I use a USB audio interface, and it has several entrances, can MainStage process each entry separately?

  Hello

  Yes

  TDC

• How to install Windows XP on the NB305?

  Hello

  first of all sorry for my English :)
  Secondly, I have a problem with the installation of win xp on nb 305...

  Toshiba already have drivers for xp on the support page is amazing, but if you try to install win xp flash usb drive, you will stop on blue death screen classic... I need drivers for disc sata hard for ICH7 controller ok I download and create special personalized win xp in nlite...

  I was integrate SP3 and ICH7 drivers and create boot usb... The installation was beginning, but after restarting the computer to continue processes copy the files to install in graphical mode... and if the computer tries to start from the hard drive of his problem with hdd and boot compabiliti trial abandoned :(

  Can you please tell me where is the problem? :)

  Hello

  On the European driver Toshiba page, you can find the Intel Storage Manager.
  This storage Intel v8.9.0.1023 creche contains the necessary SATA drivers!

  Check this package!

• Dashboard of the LabVIEW data recover indicators of the poll

  Hello

  I have attached my entire project, including the error messages that I receive. I have my labview VI to put in place to have 3 different screws. My entries, my global entries and my "side". I created my web server and all the controls and indicators that I linked. However, when I try and run the dashboard of data project, all my indicators have error signals indicating that he "could not connect to the server. I have no idea what I'm doing wrong. Any ideas?

  The reason why this does not work, it's that your web service code is not quite structured reason. When you call a web method in LabVIEW it does is run the VI related to this method. In your case you have mapped to the URL http://host:8080/FINALCOAST/COAST.vi SIDE, and then you have a poller to web service linked to this URL. When you run your dashboard the poller accesses this URL, which causes the web server of LabVIEW run COAST.vi. If you look at COAST.vi, however, you will notice that what he does is run a loop that runs until the stop button is pressed. Is not supposed for a web method. He has no one to press the stop button. In fact, there is no user interface for anyone to interact with at all. This means that COAST.vi will work forever. Finally, data dashboard gave up and closes the connection because it should not take long for the web server that responds.

  So what is the correct way? It depends on what you're trying to do. In your case, it seems that you take just a bunch of inputs, do some calculcations and producing a bunch of outputs. You could do that in a VI with the method of a web that has just a bunch a bunch of outputs and inputs. In this case, you use just a web service calling (button) connected to one of the methods. Because this method has two inputs and outputs, you will get two entry and exit of Terminal ornaments around the button that you can use to connect to your commands (entered) and indicators (outputs). When you press the button it brings together the current values of the controls and those on the server to use as inputs to call your VI sends, and then he retrieves the results from the server and puts them in your indicators. In my example attached (see the file updated the dashboard) I show you how to do this. Note that I also modified the code of VI to create a Subvi for calculation of Basic code, and it is this VI which is used for the web service. This VI has no loop in him, so he just runs once with data values and returns the results.

  If you want to rather than having a continuous process that is continually measures your system in real time you need another way to access this data from a web service. It seems that that's what you were trying to do here, even if you use data in real time. Suppose that you were, however. In this case, you were a little close, but we need to make some changes. First of all, the running process doesn't have to be part of your web service. It may be, but it's a little more complicated. Instead of this, your process running (COAST.vi) can be just a regular VI running in LabVIEW. You just open and press run as usual. However, you want to only change VI to share its data with other processes. You have tried to do by using globals. Globals allow you to share data between the screws running in the same process, but web services actually run in a process completely separate (in the web server), so you'll need something else. A drop-in substitute would be shared network Variables. You'll see that in annex changed code I replaced your globals with shared variables. Then in your web service if you just use the same shared variables. Network shared Variables allow you to share data between processes (even on machines on the network) so that you can easily access the same data to both your VI running and your web service screw I modified your COAST.vi for this (and he calls the same Subvi from the calculation of the kernel).

  In this case, you could do just a single method "inputs" and only one "exits" method, but it might be better to break up to the less distinct modes which include the strongly bound values just to make things a little neater. It can be tedious to deal with a large number of terminals.

  Alternatively, once you use shared variables you has actually connect your controls and indicators on the dashboard of data directly to these shared variables. This has the disadvantage of requiring more ports to be open through your firewall (and you can not use security as you can do with web services), but for the use of internal network, it is easier to implement. To do this, just run your VI as before, and then as soon as it runs you can select each control or indicator in the dashboard of data, press the small button below, choose 'Shared Variables' and look for your variables on your machine. In this case, each control is directly bound to the variable, and so there is no need of a button. Changes that you make in the dashboard data are immediately placed on the server through the variable sared, and your VI (which is still running until you press stop) will see the new value, update the outputs and then repel these new values to the dashboard of data via other shared variables.

  I did not create a dashboard for the last two approaches, but if you may not know what I'm talking about, then I can create examples for those as well. The screw and the project must be configured to work in any case, if the only difference is in the configuration of the dashboard.

• If click the white arrow to run vi, is compiled beforehand vi?

  I have this vague idea that compile LabVIEW means something like the compilation in c; compilation only occurs when you want to build the exe.

  And when you click on the white arrow run button in a Labview vi. The vi will be sorta like VB in interpreted mode.

  But however DRESSED review model, I saw this question on Labview know the data type of the strict definition of type at compile time. This seems to suggest that whenever you run the vi, Labview compiles the first vi. Compilation happens only when you want to compile the exe vi.

  While it is true?

  A normal compiler performs different steps during compilation. Pre-treatment, check the syntax, compilation and the actual link is more or less done only once after tell you him to do.

  LabVIEW split this. Syntax checking is a continuous process while you change influence LabVIEW vis. anything not valid causes errors like broken right during the time of change. Once you press the button run LabVIEW can simply take the diagram and compile into machine code, which is normally so fast that you don't even notice it. When you save a disk LabVIEW VI takes the compiled machine code or creates it if it has not been done so far and he recorded with the VI on the disk. Loading the VI the next time the machine code is already there, at least if you are loading the VI on the same platform and version of LabVIEW.

  If LabVIEW ALWAYS executes the compiled code, regardless of whether you run the VI in the development environment or in an executable file.

  Strengthening enforcement is really mostly just take all the parts already compiled and put them in one place, stripping anything useless such as diagrams and also signs of façade that is never visible. This is of course a simplification very strong, but for the purpose of
  This valuable discussion.

• Master/slave with events

  Hi, I'm developing an application in which the user actions will initiate certain events.  I've implemented the application as an event-driven state machine.  However, I realized that one of the events must launch a continuous process, i.e. reading from the buffer of a USB device.  It seems that the master/slave model apply.  Is it possible to implement the model master/slave with slave event triggered activity?  I have the feeling of these two designs are incompatible.

  Thank you

  -Jamie

  If I interpret your concern of a straight line, "I thought that a part of the particular event should run completely before any action of the user would trigger another event...» » :

  An event Structure maintains a queue of unmanaged manifestations.  When any event registered to a Structure of the event is triggered, LabVIEW places the event in this case queue Structure (you can have multiple records for the same event and LabVIEW will be provided with a copy of the event in each record... a bit more advanced, but it happens more often with user events, since normally you should not have more Structures for a single VI event).  When the Structure of the event is called, it will be the next event unmanaged dequeue and execute the corresponding diagram.  If there is no event in its queue, then he will wait.  If none of the events occur (are added to the queue) at the time where the period has elapsed, while the diagram of time-out is executed.

  Which means, the schema associated with a certain event needs to be completed before all other diagrams can possibly run; However, events such as buttons on the user interface, are still captured during execution of the first scheme.

  If your diagrams of Structure of the event have long-running code, then you can go out with that have be your only design.  For example, the operations find and initialize in your sound image as an attachment as things just happen once and back relatively quickly, so the button find out the slave device will probably expect you - a slave is discovered, and then initialized by pressing the key, after which your VI is ready to run several diagrams of the event.  However, if one of your States running really persistent operations, such as a schema "" run slave"where you have a collection of persistent data loop, then you will be in trouble since the schema will not end and your UI will probably become numb.

  What does not work is if persistent operations are ran asynchronously.  If your slave has something like a "Start ANT Slave.vi" that starts an asynchronous process slave for you then returns, similar to how I would expect the "Init ANT Slave.vi" to behave, then that would work.

  What RavensFan and crossrulz have mentioned are ways to achieve this in your design (rather than in the design of the class ANT slave).  Say that your ANT class slave doesn't have any internal asynchronous substance put in place that you can just start, and you will perform all operations running on your block diagram yourself.  In this case, you can create a new parallel to your course while loop.  A form any synchronization mechanism, such as a notifier, could be acquired and transmitted to two loops.  Run the loop of the slave could simply wait on the front warning system it does nothing.  Then in an event run in the upper loop for push button start, for example, you have to send a notifier, stating, "Okay loop slave, please start".  The slave will begin its operations and continue to execute, while your event in the first loop schema would end, and you would still have a user interface responsive.

  The design pattern of messages in queue manager is where you have a queue instead of the notifier used in the example above, and you can messages from queue you want the slave to receive (and apparently act accordingly).  Loop of the slave and then check the queue to see if his master has sent something - if so, it performs this action; If this isn't the case, then it executes any action that it deems appropriate.

• buckle hidden block diagram?

  Recently a VI I have worked for a period of time started to run slowly.  A large (5-7 seconds) delay occurs after I connect my hardware target before the VI continues processing.  I'm trying to understand why, so I made a copy of my project and began to remove tabs with a lot of indicators in order to track down the precise cause.

  That did not work, so I tried to pause execution during the delay of the program.  I expected to see highlight in an active area code, but instead, it is showed in the figure:

  

  The black outline flashes during execution paused.  Once separated I did, there was much smaller black box in the lower right corner... in other words, between the 2 times, it is as if it is highlighted on a loop with a stop command in the lower right corner.

  Also note that the horizontial and vertical scroll bars are completely to their extreme.  It is an area of the block diagram that I do not at all.  In other words, if I scroll manually on this same area of the code, there is nothing there.  In other other words, it of like exeuction program is stop and highlighted to a region of code that is not yet visible.

  I know it is possible to hide the objects in the front, but is it possible that there is a code of block diagram which is hidden?  What can I do to understand what it is that is highlighted as shown above, when I hit the break?

  Thanks in advance.

  You can do a cleaning of block diagram (but not record) to see ifanything was hidden.  I would do that, especially if I inherited code.  I saw subVIs hidden behind the case structures and other things like that.

• Counters of artifacts of high rates of decimation filtering

  Hello

  I have problems with a report filter high decimation of artifacts in my data.

  I use Digital Filter Design NStage MRate filter Design VI to create you a filter step achieve a ratio of decimation of 2000. The first step is a CIC. Both are the TREE. The decimation ratio first step is 500. The other two are 2. My incoming data rate is between 1 and 10 MECH. / s.

  I'm acquiring a few seconds of data in blocks 200 ksps, and I'm filtering their block by block. I get artifacts at the borders between the blocks, as described below in two different zoom levels:

  

  

  When you implement this filter, get the best results using the MRate Nstage DFD filtering to block VI with the symmetrical extension type. I think that it is supposed to avoid artifacts at the extremes of field.

  My application is lower. Another loop acquires the data blocks, and stores them in the queue. This loop treats each data block. The reason for the inside of the loop is because data are acquired from two channels simultaneously, make the waveform output a table 2 x 200000. The vi 'IQ Mix' is a mixture a wave of frequency equivalent with the data to convert it to focus on the DC I and Q signals.

  

  Anyone who deals with this problem before? It strengthens with the highest ratio of decimation and lower bandwidth.

  Cody,

  Thanks for the offer, but I think that I traced this problem down.

  Number 1 has been that if I want to deal with continuous data, my mix waves must be continuous. I mixed a same wave with each block. I did the phase of my wave continuous mixing from block to block, and which removed a lot of artifacts.

  Number 2 was that I need to use the right filter treatment VI. Above, I use the VI for one-piece, non-continuous treatment.

  Number 3 was when using the continuous processing VI, I need to make sure you use a separate VI for each channel instance, I want to deal with. This means that I can't use a loop for looping through the channels. A non-parallelisee loop for use the same instance for all iterations. Paralleled A for loop is not compatible with that iteration uses what instance.

  I'm not completely out of the woods yet, however. I always have problems with the first block of data, that I proceeded. I think it's a quite different problem for a separate thread, though.

• Whats means "data prefetch deleted xp?

  Just happen suddenly. My computer is running slow slow. When run maintence, (avg tune up), it says "data prefetch deleted.

  AVG Tune Up can not solve the problem.

  Any help idea is very well appreciated.

  Thank you

  Glkrrera

  prefetch is a folder in Windows to keep a copy so that windows can load programs, etc. faster

  they have been cleared and will now need to be implemented again, Prefetch is deleted by windows with the oldest, removed as a continuous process

  do not clean prefetch and you'd better uninstall AVG tune up.

• Try to defragment (Vista/Windows Live OneCare)... No way to track progress?

  Please forgive me if I am posting this in the wrong place...

  I get messages in Windows Live OneCare, which is supposed to manage my 'tune up' monthly including defragment my hard drive, saying that "Defrag has only partially completed due to high levels of fragmentation."  My computer is really slow and so I try to do a full defrag - but the window Disk Defragmenter has just said that there "defragmentation, which can last a few minutes or a few hours.  Is it possible to track its progress?  It is the first version of windows I've used that did not have a kind of screen with boxes inside as well as the Defragmenter, indicating what has been done.  For more than a few hours Defragmenter that happened and always says the same thing.  I've done a few times, and I can't tell if it's just hang up or if it's even the defragmentation.  usually after that about 8 to 12 hours, I start to swear, abandon and simply cancel it.

  Please help - I'm about to hire a ninja out of my computer...  Thank you!!!

  Little.

  I can't understand why people want an old defrag process. I want to use my computers, not watch the blocks move around the screen. With XP and earlier versions, defragmentation was not a dynamic process which took place without user intervention. You need to stop using the machine or program it so that it occurs in the middle of the night, because any interruption, even something as simple as a kick, screen saver required process to start over. Some machines would never get defragmented due to other processes constantly interfere.

  Subsequently, the machine will start to become more and more fragmented, until the user remembers to start the process.

  With Vista, it's a continuous process of low priority that does not interfere with your use of the machine. Simply, it is done without having to do a thing. And it is ongoing, the machine must never get heavily fragmented.

  As I mentioned earlier, if you - or anyone - really wants to watch the blocks to move, there are a lot of software vendors that will allow you to give them your money if you can. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• (Redirected) Alienware m17x will beep once after respawn, start Windows and restarts

  Hi guys

  Thought it was time for a cleaning on a so used the feature of respawn to return the unit to the factory settings. BUT eventually, the device starts, starts to load Windows beeps once and then restarts. It is a continuous process... any ideas? I tried the same process, using the recovery disks created on delivery... with the same results...

  Best of this post in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• The HP Pavilion dv7-3065dx system recovery failed

  I'm trying a recovery of my CV due to problems that fails to fix with Microsoft office and Photoshop which will not at the restoration work.

  I first used the recovery disks that I did when I bought the computer and ended with "the system recovery failed.

  I then tried with the help of the partition recovery and restore to fail again

  I bought the HP discs to do the recovery and still the same thing. In case of failure

  I read that it could be because of my internet connection, but it is a compressed and wireless and I do not have access to the router connect physically, the internet is password protected.

  I always get the computer to go through all three disks, System Recovery DVD Windows 7 Edition home premium 1 and 2 as well as the Application and driver recovery CD, then he starts the third CD and continues processing but in the end, I get the same message, "the system recovery failed.

  I contacted HP for assistance but they want $99 for the help, I am low income and can not even afford and tech IT much less $99 so trying to fix my computer on my own. I was able to make my daughters Toshiba last week so am able to talk right now, but my computer isn't end of recovery

  I save the file showing what was going on but don't know if I can put it on this post and do not know how to open it up to copy / paste

  Hope to hear from someone soon, thank you very much

  PJ

  OK, thanks, I got it today. It seems that my hard drive is about 450 GB, which is nice. I thought that it was more room there to 58 GB. I will definitely get this fixed. He said that I have 408 GB unallocated, so now I can get it fixed. You've been a great help thank you

  Paula

• Performance computer and software security

  I've seen a lot of comments on computers with Windows 7, hampered by the host process for Windows Services, the Antimalware Service executable and other security products. Is there a straight answer about whether it is possible to stop these programs make the computer unusable almost several times a day? Other, that is, the switch to a MAC system?

  Because an AV program must analyze any file being loaded on the system or written to the disk, it must have an impact on performance, when these programs are discussed in the computer press is one of the factors considered by the examiner.

  It is a continuous process and can't seem to ' several times per day ", they can do a scan scheduled on a regular basis, but the regularity and time actually chose to do can often be defined by the user.

  If there is a problem of my own experience it goes often to the excessively feature rich security 'suites' preloaded by manufacturers of computers and sold as commodities in a box computer retailers. It is hard to tell if it's actually the scanner AV itself or those extras in the package is the root of the problem, but I've lost count of time remove these packages have a massive impact on the return, resettlement in most cases do not reintroduce problems so I guess that all the cleaning has had an impact.

  It would be good to have more choices, but the main reason why I tend to prefer Microsoft Security Essentials/Windows Defender is its simplicity. It has not all the peripheral functions and so far I've seen few tend to develop these performance issues.

  Don't make the mistake of assuming the Macs are immune, they still need AV protection and my iMac just completed an update which includes security fixes.

• BlackBerry 9550 smartphones - cannot load the operating system and a re-boot loop

  Sorry if this is going to be a long post.

  I've been running OS 428 and a hybrid (428 based) since it was leaked without a hitch. 2 weeks ago, my 9550 rebooted on its own with a JVM ERROR 534 (I think it's the code because the screen just turned white with the error message and then rebooted on its own). He never started up properly then. The boot process dates back to about 3/4 of the way then the FMV of error appears again then re - start. A batt pull does not help.

  I wiped and loaded (loader.exe) operating system but when loading cod, it will again restart (reboot occurs when email.cod is loading). Tried several times and never loaded properly. I tried a load OS 428 right and it went well. When it is started successfully, I wiped the device and loaded the hybrid that I used before and everything was fine. When filtered 451, I upgraded and everything is fine - for a week!

  He has just restarted on its own again. I think with the same JVM error code! I'm unable to load the operating system using loader.exe. I even tried the "loader.exe /nojvm" switch does not. I wiped with Jl_cmdr or BBSAK, still no go. I then used DM BB. I loaded OS 320 and loaded correctly. Then I wiped and loaded the OS. It is not load or when it loads successfully, the JVM error still appears 3/4 of the way of the boot process.

  So when I load OS 320, it will load fine even after a battery pull. If I use OS 428 or 451 (both narrowed via Shrink-a-BONE), JVM error no longer appears when using the device or during the startup process. Don't forget not that previously I was using either straight (shrunken) 428 or 451 and a hybrid with no problems.

  I decided to try a derelict OS 451 and used the "Platform.alx" of OS 320 file. It works so far! Pulled the battery about 4 - 5 times already and loaded all my apps and no JVM error for about 2 days. I tried right OS 320 and he also re - will start on its own several times a day.

  It looks like completely wipe the device using BBSAK, Jl_cmdr and DM BB do not really completely clear the device.

  What could have caused the reboots and error JVM?

  EDIT: I tried to wipe the device using the erase option in the security options. The status bar has reached 100% and then restarting the device, the FMV of error pops up again and my 9550 goes back to a continuous process of reboot (even pulled the battery).

  EDIT: I tried the command line "javaloade.exe usb - cloth" to wipe the device and the OS loaded (using loader.exe /nojvm) very well. In the end, shippers said "updated successfully". The unit restarted and about 3/4 of the way - another jvm error! I removed the battery and wait a few minutes before re - insert and is currently the starting now... Will update what's going to happen...

  EDIT: Yes! It finally starts. Will try an another battery pull... 1/4 of the way in which the boot process - another JVM error! Pulled the battery and restart... Error JVM still about 50% in the boot process.

  EDIT: Can't get any OS to load using 'loader.exe' or 'loader.exe /nojvm. It stops during email.cod loading, then restarts. I was able to load OS 320 well via BB DM. problem is when I click on Options, error: "error starting net_rimm_bb_options_app: symbol KeywordFilteredScreen.» KeyChar "not found" is my watered device? Help, please. Thank you!

  EDIT: I tried to load the operating system by:

  -remove the battery.

  -Connect to the PC.

  -Command prompt: command /nojvm loader.exe

  -When it says connection to the device and the battery with a red 'X' icon is displayed, I re - insert the battery.

  -The operating system loads very well but are unable to properly start like 3/4 of the progress bar startup occurs an error in the JVM and then reboot again. Help!

  --> Was able to start properly after a second reboot not forced. Will try a battery pull... JVM error again... Will allow it to boot on his own w/o a battery pull...  Error JVM... Removed the battery, re - insert... Error JVM... allowed to start on its own... Error JVM!... I remove the battery and reinsert after 5 minutes... JVM error yet... What is it recharges without end?

  Just had my 9550's replaced and all of the good mother!