Entry point parameters

Similar Questions

• Loop through the sequences selected using set of entry points into LabVIEW OI

  Hi all

  I have an operator Interface where the operator has the option to select specific measures and loop over the sequence selected according to the needs.

  

  Everything works as expected, but the customer wants to remove the default loop configuration pop-up box.

  

  Must be defined by programming the parameters of the loop (and not by the user). I figured out how to build arguments interactive but don't know how to spend it.

  

  Any ideas / suggestions would be greatly appreciated.

  Thanks in advance.

  Kind regards

  SS

  UnspecifiedError wrote:

  I am aware of this method and it works well, but the requirement is to run with the model process for example 'Test DUT' entry point

  Use SequenceViewMgr.ExecutionEntryPoints to get the corresponding entry point object, and then use EntryPoint.LoopOnSelectedSteps ().

  Hope this helps,

  -Doug

• Q followed by "app has no entry point.

  Hello. I got the alternative entry point as you said Mark, but the setName (string, applicationdescriptor) doesn't yet because I'm not sure what to set the descriptor. I tried this:

  In Main(), I took the new ApplicationDescriptor (ApplicationDescriptor.currentApplicationDescriptor (), null) and used to set a variable in the PhoneListener class. When I want to change the icon for the process that manages the PhoneListener, I use this variable (let's call it ad) type ApplicationDescriptor to say:

  HomeScreen.setName (newname, ad);

  I always get the error: module has no app entry point.

  How to use the ApplicationDescriptor correctly please? Oh BTW, because I had to use JDE 4.7 to use setName (name, descriptor) - since 4.6 doesn't support - does this mean that my application does not work on BlackBerry "BOLD", or there is a work around to setName from another process?

  Thank you

  Justin.

  Just an idea, not sure you should be. Why do you need to leave your application? Let it run all the time. You can simply hide application

  using Application.requestBackground.

  Another idea: you can try to run your application with specific parameters as in this link http://www.blackberry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800620/How_To _... In this case, I think you're going to somehow find out if your application is already running and do something else, for example global event message

• (Updated) Maybe Mr. Sohm can help-Module has no entry point app error

  Hi gentlemen. I tried twice to this announcement, but no one could help me - Mark Sohm reads maybe this?

  I'm trying to change my name to the application and get an IllegalArgumentException: Module with handle [1619] and [0] index has no application entry points. The line of code is:

  HomeScreen.setName ("$" + Math.floor (allowanceRemaining) (int) + ":" + daysRemainingInCycle + "days left", 0);

  My application starts automatically at startup (but is not a module of the system). There three classes. When it runs on startup and when I click on the application icon, the addalistener class is running. AddListener situations instantiates the class MonthlySpendConfig to add parameters, and a third class, StoreInfo, is used to store persistent data. It's a CLDC application, with homescreen number 0 and start level 7. My JDE version is 4.6.0.12 and my simulated phone is the 9000 "BOLD".

  I'd appreciate any help! I Googled it and read the docs again and again...

  See you soon,.

  Justin Dutoit

  I replied to the other post here: http://supportforums.blackberry.com/rim/board/message?board.id=java_dev&message.id=40260#M40260

• Application Plugin error - could not find the entry Point (48::72)

  Hi all

  Anyone who bought my plugin has reported these errors when applying:

  invalid filter (25::3)

  could not find the main entry point for myplugin.plugin (48::72)

  They use CS6 on Snow Leopard on a Mac Pro 3.1 10.6.8 so this should work very well (the effect was compiled as a 64-bit using the latest XCode plugin, the Mountain Lion 10.8.5).

  I was wondering if anyone here has had this problem, and how they have solved.

  Thank you!

  Christian

  We managed to repro this on a machine running OS x 10.7.

  It turns out that it was probably due to one of the two parameters of generation in XCode:

  Basis of SDK, that I put OS X 10.9, and (most likely) OS X deployment target, which is the default value for the compiler. By reducing the Base SDKS to 10.8 and setting the target of 10.5 deployment. This fixed the problem on the machine 10.7.

  Waiting for the user who reported the problem to confirm the re-compiled version works on his workstation. However, I thought that I would put the solution here, just in case someone else has this problem in the future.

  Christian

• JDK 6 What are the suggested entry points to package such a request?

  Hi all, no need to mention that I love this forum and the help I received from its members, thanks to you all.

  The question is, what are entry points necessary in JDK 6 for an IDE like net beans or INtellij Idea use it without problem.

  I already packed beans net successfully, but only the application, is - can package the application and the JDK 6 at the same time, so you don't need to download the JDK 6 on all computers?

  IntelliJ Idea was packed, but is very slow to open and time do not know why.

  Thanks for everyone to contribution for an answer...

  MrBean344

  You can capture togather JDK and NetBeans or separately.

  The second way gives you a possibility to update the JDE without recapture NetBeans.

  You must uncomment OptionalAppLinks = Plugins\ *. * (. is better than *.exe) in captured NetBeans project.

  After the construction of NetBeans, you can create the 'Plugins' folder and put there most recent captured JDK (remember to change the paths in NetBeans parameters).

• iTunes.exe found entry point

  After the last update error ITunes.exe entry point not found

  avcfplayersetclientenforcedexternalprotectionmethod could not be found in the dynamic link library c:\program files\iTunes\itunescore.dll - I download windows 10 iTunes 64 install and ran repair - repair has not fixed the problem

  Entry point errors can usually be fixed by removing the offending dll, and then repair the component it is programs and features Control Panel. iTunesCore.dll is part of the main application to iTunes and it will usually be in iTunes C:\Program or C:\Program Files (x 86) \iTunes.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  More information area has direct links with the current and recently built in case you have problems to download, need to revert to an earlier version, or try the iTunes for Windows (64-bit-for older video cards) release as a work around for performance issues, or for compatibility with QuickTime software or a third party on 64 - bit systems.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  Your library must be affected by these measures, but there are links to tips of backup and recovery elsewhere in the tip of the user.

  If the problem persists and you have a 64-bit system try for the old version of video cards which is a 64-bit Installer for most of the 32-bit code, similar to all 64 bit iTunes up to 12,1 versions.

  TT2

• Thunbird does not open after upgrade, I get entry point not found cubeb_get_min_latency could not be located in gkmedias.dll

  Thunderbird just failed after an update. It does not open. I get the following message:
  Not found entry point cubeb_get_min_latency could not be located in gkmedias.dll
  Any help with what I can do to manage this?
  Thank you very much
  Chris

  Download a complete Installer and reinstall. You can get it here:

  • https://www.Mozilla.org/en-us/Thunderbird/all.html

• the procedure entry point NSSUTIL_EscapeSize could not be located in the dynamic link library nssutil3.dll

  Windows XP with Firefox 18.0.1 does not open when upgraded to the latest version.
  Error messages have been
  (1) the procedure entry that point pr_setcurrentthreadname could not be located in the dynamic library (2) ndpr4.dll the procedure entry point NSSUTIL_EscapeSize could not be located in the dynamic links (3) library nssutil3.dll was not able to load XPCOM

  A ran malware & anti-virus software then deleted Firefox via Control Panel, then residual file file C:\Documents & Folders\ApplicationData\Mozilla Director and program folder.
  Local & installed products ndpr4.dl and nssutil3.dll - fresh reinstall firefox several times - he got rid of the error message 1 but not 2 or 3 always cannot open Firefox.
  All solutions?

  I have this problem and I use Zone Alarm Extreme Security with Force active field. I found that by turning off the virtual Cache in Zone Alarm that this problem has disappeared and has been able to restart firefox.

  Here is a post I found that addresses the issue in some way. http://KB.mozillazine.org/Browser_will_not_start_up#Firefox_does_not_start_after_updating_with_ZoneAlarm_ForceField_enabled

• Update will not work because of missing files or procedure entry point NSS_InitializePRErrorTable could not be located in nssutil3.dll

  After update mozcpp19.dll and mozcrt19.dll files are not in the Firefox directory, and start conversation said that he needs them.
  If I put them in the boot of the not required files but gives an error
  Procedure entry point NSS_InitializePRErrorTable could not be located in nssutil3.dll

  I've just updated to Firefox 10.0.2 and exhibit the same problem of missing dll (Mozcrt19.dll and sqlite3.dll)

  I'm also using ZoneAlarm (but not a version with the virtualization of the browser) and find a comment about ZoneAlarm, I decided to stop ZA and try again Firefox: it starts without a problem.

  So my quick fix (very) is to stop ZA, launch Firefox and restart ZA....

• After you install a Foxfire 5.0 update, I get this message when you try to open Mozilla: the procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll.

  I get this message when you try to open Mozilla: the procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll.

  Do a clean reinstall.

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
  • Uninstall your current version of Firefox.
  • Do not remove the data of a personal nature when you uninstall the current version.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data is stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

• Alerts SmartBridge: entry point for notifier.exe Blueyonder ist not found

  Since download Explorer 7, I get an alert message whenever I restart.

  Alerts SmartBridge: point Blueyonder - istnotifier.exe - entry not found.

  "The procedure entry point GetProcessImageFileNameW 'no' could not be located in the dynamic link
  Library PSAPI. DLL'

  Does anyone have an idea.

  I also read that this alert message if version IE7 beta 2 has been installed.
  I guess that after the update security or installation of the end version of IE7, the problem should be solved.

• Satellite P300: Error BSOD STOP: c0000139 {entry point not found}

  I had this error a few weeks on my Toshiba P300.
  When I start my laptop it appears a blue screen with an error for a fraction of a second:

  STOP: c0000139 {entry point not found}
  The procedure entry point ntoskrnl. ExiAcquireFastMutex is not found in the library of dynamic links Hal.dll.

  Then normal startup of Windows Vista.
  I get this error when I start the computer from the Hibernate mode. What does this error mean?

  I also have problems with my built-in webcam. I get the message: "locked by another application." I already reinstalled the software I downloaded from the site, but that did not help. The error has something to do with the webcam this doenst work properly?

  I put t know what can be the problem, but you must use restore system and OS rollback to an earlier time before this error message.

  Subject of webcam, please visit http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=131308

• Explorer.exe - Entry Point not found

  Last week I update my Lenovo G510 Windows 8.1.

  Yesterday, I've updated following three updates:

  1 - Conexant - Audio - Conexant SmartAudio HD
  2 Microsoft Silverlight (KB2977218)
  3 - Qualcomm Atheros Communications - Bluetooth - Qualcomm-Atheros Bluetooth 4.0 AR3012 controller

  After that when I restart windows message appears. It seemed not every time, but it often appears when I start computer.

  "explorer.exe - Entry Point not found".

  

  Thanks ColonelONeill

  After week last updated to Microsoft, this error is not after the start.

• In the example LabVIEW Full featured, which makes the entry point button reappear?

  My question is this: what piece of LV code or invoke the node for the TS engine makes the entry Point button reappear when loading a file of sequence?

  Background:

  I inherited a modified version of Full Featured LabVIEW UI, which has been moderately modified (enough so this restart is not really an option, but it is still quite similar to use as comparisons for behaviors).  In addition, this code was started in LV2012/TS2012 and I'm migrating to LV2013/TS2013, but this behavior is consistent in both versions.

  Here is what I tried:
  I have found that when the command connect runs (see attachment), the button which is a TSUI. IButton control, SEAO is grayed out or hidden.  In the unmodified example user interface provided with TestStand, button is again displayed when loading a file of sequence.  The problem is that when I load a movie file in my code and click it before the race, the button does not reappear. In my code, I can run the sequence successfully by right click on the movie file and selecting run, so I don't think the sequence has an error, or the process model.

  Thanks in advance,

  Seth

  Seth,

  The entry 'options' of the ConnectCommand function controls this. On help page for this entry, you can see that there are options for "ignore enable" and "ignore visible." Or any of them may affect the functionality of the key entry point. You could try to make the options for both keys 0 and see if that fixes the problem. If this isn't the case, please let us know.