Envio 3TO Ext HDD not recognized

Similar Questions

• HDD not recognized after format

  I reformatted a HARD drive via the cable series/SATA from another operable XPS machine. I plugged the HARD drive into the unit of Dimension 8400 troubled.

  I to configure a base boot shipped with XP install disks.   Windows Setup runs at the Welcome to Setup screen. Selection of ENTRY or R for the results of recovery in the setup console do not find hard drive units.

  I in the configuration of the system. The boot sequence displays the SATA hard drive is not present. but the workout section suggests that 0:SATA Drive-0 is enabled, activated and the connected device is usable. The details of the command show player that ID is unknown.

  How can I get the drive reformatted to be recognized?

  JackShack,

  My installation disc was SP2 then I obtained a copy of the installation with SP3 disk and got the same HARD drive not recognized as before. On a whim, I changed motherboards and all straightened out. I think it was a hardware problem. Thank you for your generous support.

  SoCoMt

• Satellite L670 - 1JP external HDD not recognized at startup

  I bought an external hard drive Samsung G3. The first time I plugged it, it was directly recognized by my Toshiba Satellite L670-1JP and worked without any problems.

  But later almost whenever I start my computer, it is not the external hard drive. Then I have to disconnect reconnect en USB connection several times to make it work.

  It is your time, so how can I solve this problem?

  Hello

  Other USB devices work properly in the laptop Satellite L?

  Have you tested this disk external DRIVE with other computers/laptops?

  I think that you should do this because it might be an external HARD drive failure.

  Check it!

• Secondary HDD not recognized

  I recently bought a used HP CD7100 CMT desktop computer and I try to install a secondary (or slave) antibody SATA hard drive.

  It is the first computer I owned with SATA drives and I can't recognize the drive volley.

  Any help would be appreciated.

  Thank you

  You said high school you are trying to install is a SATA drive.  There are no jumpers on the SATA drives. I assume you are using a SATA data and power connector.  If so, the two drives appear actually in the BIOS?  If so, the hard drive is formatted?

  To format the hard drive, go to control panel, system and Maintenance, administrative tools, computer management, and on the left margin click on disk management.  On the screen, you should see a volume that is not assigned.  Right-click on the new volume and select 'Format '.  The format will take a while depending on the size of the hard drive, but it shows the percentage of completion at the top of the window.  Make sure you don't accidentally format your main drive.

• Store TV 2 to - HDD not recognized in Windows 7

  My camera 2 TB store TV is no longer recognized by Windows 7.

  I went into Device Manager and the device is listed as "Unknown".
  So, in the device Mgr I uninstalled / reinstalled but still no joy.

  I think that the problem is a corrupted driver.

  I searched the Toshiba site and cannot find a driver for the device.
  Anyone know where I can get one?

  Hello

  This HARD drive is a Plug n Play device, which means that additional drivers aren t necessary.

  The question is: any other computer recognize the HARD drive?
  Have you checked all USB ports?

  This HARD disk can be connected directly to the TV via HDMI.
  It work?

• HP Personal Media Drive 500 GB: external HDD not recognized

  Ran a cleaning defragment the external hard drive... Now I can't access the drive, Windows Explorer is just he labelling "L Drive" and I just got an error window saying I need to format the drive.  Will not format the disk wipe?  Help!  Drive is an external image storage... Always panic Mode!

  

  Glad to hear it, please keep me informed on the final result.

  Lesson learned here, do not do a cleaning of the external drive using the Windows Cleanup utility.  Defragment is OK however.

• Inspiron 2500 new HDD not recognized

  I replaced the original 10 GB hard drive in my Inspiron 2500 with a PATA/IDE Hitachi 80 GB 5400 RPM HARD drive (mod 0 has 28417).   BIOS shows no disc HARD now.  BIOS is the current version, A15.  I tried to remove and re-seating the new drive twice with no effect.

  I found other threads of message showing Inspiron 2500 owners upgrade to 80 GB hard drives with the downside of not to use a SATA disc successfully.  So I thought this drive would be compatible.  I was wrong?

  First, I share this drive for something else, any suggestions?

  
  

• Inspiron 531 - 2nd SATA HDD not recognized

  Hi all

  Well my beautiful shiny new Dell was delivered today.

  I got my disk 'Data' from my old PC (before it is returned) and put in the new PC today. Connected by cable SATA and SATA power supply that connects the drive "primary".

  However, when the DVD player is connected to SATA 01 and disk 'data' to SATA 02 or 03 then the dat adrive is not detected in BIOS or Vista. I tried another SATA cable and swithched the SATA power leads between the main drive and the "data disk" but nothing works.

  However, when I disconnect DVD and then connect 'Data' drive to SATA 01 it appears.

  If I then reconnect the DVD SATA 02 or 03 while it does not appear.

  So overall, it seems that only SATA 01 and 02 or work.

  Someone at - it suggestions?

  The power supply is not enough strong (I also have an in this 8600GT GFX card)?

  See you soon
  B

  Message edited by Branny01 on 08/03/2008 07:03
  
  

• USB - external hard drive WD My Book 1230 is not recognized (Code 28 - access denied)

  Problem started with the purchase of a an external 4 TB My Book Western Digital drive.

  I bought this second external drive for backup on a fully functional IDENTICAL existing WD my book 1230 4 Tb.

  My PC is a HP Pavilion e9180f running under Windows 7 64-bit.

  The new external drive is not recognized by the PC... I get the error message

  Device driver software was not successfully installed

  Please consult the manufacturer of your device to help get this device installed

  My book 1230 X failed

  When I put the driver (with admin rights) I get the error message

  Windows encountered a problem installing the software driver for your device.

  Windows found driver software for your device but encountered an error trying to install it (USB Mass Storage Devive - access denied)

  I tried the HDD not recognized on a HP Envy laptop running Windows 8 and it is recognized and work very well (if the disk is OK).

  As a possible solution, I downloaded and installed the driver for the WD HARD drive without erasing the situation.

  I tried to plug the WD My Book 1230 on all existing 7 port USB of the PC and the situation still exist.

  In Device Manager the defective WD My Book 1230 appears under the category "other devices."

  I tried the Microsoft Mr.Fixit running without correcting the problem.

  You have a trick to help me solve the problem.

  Thank you.

  Unfortunately, your procedure has not worked as the device could not be uninstalled from the Device Manager.

  As I prepared to reinstall Windows 7, I gathered information from Control Panel - programs.

  I did a search by the most recent dates, and I realized that an Application has been installed and I was not aware that I installed it.

  The cause of my 9 day long search for a solution was a malicious program called Manager of adjustment by the AZTECS.

  Removing and restarting desktop cured the problem.

  Now all USB devices, including my Western Digital My Book 1230 are recognized.

  Thanks for your advice, support and everything.

  It is a "case closed" with a happy ending :-)

• PX1394E - 3 50 (500 GB HDD USB 2.0) not recognized by Win XP SP2

  Hello. I just bought and traded because I thought the first was faulty, a PX1394E - 3 50 500 GB HDD USB 2.0 external hard drive that uses Fire Wire, USB. Now I ve tried all USB devices, to begin with it uninstailling everything on we / off on to just pluging it when we / off and it keeps saying be the devide was not recognized and it doesn't propperly (small box pop up bottem left of the screen)

  Now Issve exchanged it once already, and he said that the unit was defective, but having exactly the same problem with two different cameras? This seems a little more bad luck for me.

  If anyone can help, that´d be great.

  -Dan

  Hello

  You have software of Regen with your HARD drive? I don't know if this can help, but check the Toshiba download page and you'll find a version for Windows XP Home edition. Maybe this will help.

• HDD USB not recognized as "physical1" when creating the new virtual machine

  Hi all

  I wanted to create a new virtual machine, and I wanted to use my USB as a physical drive.

  But Workstation shows me "physical0" which is of course my drive internal.

  I tried USB pen drives. They are not recognized either.

  This somehow is no longer supported? I would have that it would be possible to use USB external HDD as the physical drive to a new virtual machine.

  you have installed VirtualBox?

  If so, you can try to use the virtuaklbox command line tool to create a descriptor of rawdisk for this disc.

  say diskpart on this drive? -It is "online"?

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

  You find me also in the PhD Virtual Backup support team

• HDD and dvd are not recognized in the configuration menu, what could be the problem?

  The hard drive and dvd drive are not recognized on the configuration menu for my desktop Pavilion a4316f.  What is a controller failure?  A PCI controller can be used to replace the motherboard controller?

  dhobs,

  Anguish, that the suffering of the faulty motherboard has been aggravated by your actions. Why you decided to perform a restore (which re - formate the disk, erase all your data files (documents, photos, videos to misic,) is really amazing.)

  You had a viable BONE, work and the data store. You he clobbered with recovery. As explained, the 'tattoo' reads the embedded hardware configuration and will stop at the resumption of treatment if it detects a change.

  Only temporary help I can offer is to open the computer case and install a small 12v on the NVidia chip fan. IF the chip is not 100% burned, you can earn low enough time to reinstall the operating system and then add the map.

• Installation of XP Prof on Tecra A9 PTS52E - SATA HDD is not recognized

  Hi all

  I have a "nine" Tecra A9 (PTS52E) with Vista Business installed. However, I need XP Prof and a CD of XP - SP2 slipstreamed. The SATA drive is not recognized XP installation, so I need a driver of "F6."

  There are a lot of howtos on this for the 945 chipset, but I couldn't solve this problem on my A9 (Mobile 965 Express Chipset). I don't want to buy a USB floppy for one-time-installation drive. So I have to build the driver (iastor.sys and more) in the XP installation disc.

  A few problems: there seems to be no easy way to do this, because intel only provides files *.inf for the ICH8R (RAID =) controller, which does not exist in the A9. So I have to change the *.inf files, correct?

  Another thing: I saw in an another post here the discussion on switching to AHCI in the BIOS in compatibility mode. I can't find a way to change this setting.

  Aargh, I need this laptop for my work on an A8 (which is also mine), I installed XP without any problem.

  Can anyone help?

  Thank you

  Michael

  Post edited by: michael-cologne

  Nice info I m interesting in the XP installation process.
  It would be great if you could post a few steps.

  Thank you

• Hard drive not recognized on the computer after the upgrade to Vista

  I just upgraded to vista a my ext hdd does not come in computer how to install human and format the hard drive?

  What's your Vista-compatible external HARD drive? http://www.Microsoft.com/Windows/compatibility/Windows-Vista/

  Have you loaded the proper drivers, firmware or software for the external drive and your version of Vista?  He can't just plug-and-play, especially if this isn't original USB key but a convert.

  Once it is recognized by the system (if it is compatible and once the drivers are installed), go to start / Control Panel / administrative tools / computer management / management of records and right click on the external drive that shows there or format to change the drive letter or a similar task.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Tecra M9-185 - 750 GB HARD drive not recognized

  I have Tecra M9-185 (PTM91E-0G4045G3) with BIOS Version 1.90 dated the 29.02.2008.
  It came with HARD drive of 160 GB, which is quite old and needs replacement. I want to upgrade the HARD drive. I tried to use the 750 GB HARD drive, but it was not recognized by the BIOS.

  Is it possible to upgrade the HARD disk? Is there a limit to the ability of the new HARD disk that can be installed?

  Hello

  Of course, the HARD drive can be upgraded.
  The laptop supports the SATA controller. The SATA controller is not limited to a special HARD drive size of my knowledge. 750Go should be supported too. But it might be possible that the BIOS is not able to manage these dimensions.
  Try a different SATA HDD with the smaller size.

  But question: why you n t choose an SSD (250 GB)?
  I have improved my Tecra A10 with a 250 GB SSD and the performance gain is amazing. The machine is running much faster and quieter