HP DV6-1240eo problem: "Volumebuttons" lost after upgrade to Windows 7

Similar Questions

• Data lost after upgrade to Windows 10

  From Windows 7 to Windows 8, the address book and all the information has been lost. He did not return with Windows 10. A professional computer man could not find.  Help, please.

  Hello

   
  Please contact Microsoft Community.
   
  Please confirm this information to help you better:
   
  1. the application or the e-mail client you use. ?

  2. are you able to access the contacts folder by using the web browser. ?

  3. Apart from the missing contacts, it is able to send and receive emails after upgrade to Windows 10?

  Get back to us with the required information, we will be happy to help you.

   

   

  Kind regards

  Anusha

• Pavilion dv6-4024tx: display random crashing after upgrade to Windows 10 (back to Windows 7)

  Hey all,.

  I used to own a computer laptop dv6-4024tx Pavilion which I gave to my father to use after you have bought a new laptop for my part. It was in pretty good condition when I gave it to him, with the only problem being that she would get very hot unless a cooling pad was used (which I it comes with). At the time, it was running Windows 7 Home Premium with no problems and everything was fine. However, it might be interesting to note that while I had it I had problems with random blue screens while I was with the latest graphics drivers, so I drove back to the drivers supplied on the support page for this laptop. After I "upgraded" to Windows 10 (do not perform a clean install) for my dad, the laptop would randomly crash and display something like the photo that I have attached, before going empty and show again several times. Believing that it would be a problem with the GPU, I went and Display Driver Uninstaller to remove completely all AMD drivers and software, downloaded the latest driver on the AMD website and installed. It seemed to temporarily solve the problem, but as it's always within 30 days of installation, I offered to go back to Windows 7, but my father wanted to leave it and see how it happened. Oddly enough, for the next month, it never reported the laptop crashing again and the time period for return finally expired. The problem of course back then I tried the same solution from before but the noise continued. I tried to disable the GPU completely from the Device Manager, so that the laptop was running with Microsoft Basic display adapter. He seems to have stopped the fracas, but less than a week my father told me that he had crashed again.  I tried to restore the laptop to a system image I had done years ago, but I learned that you cannot restore an image to a different version of Windows System. Finally, as a last resort I backed everything up and made a real clean install of Windows 10, and the problem has not yet disappear.

  My goal now is to return the Windows 7 laptop somehow. I can mount a virtual image of the system hard drive and access all the recovery files provided by HP, specifically the Recovery Manager. From there, I can do a recovery USB or DVD (s) we hope to restore the laptop to all conditions of factory (so theoretically return to Windows 7). I will try this, but I need a flash player more than 20 GB or several blank DVDs I don't currently. In addition, Recovery Manager says that this medium can never be created once, so it save me time and money (not to mention my last lifeline) if someone could please share their views on the question of whether this method would be successful or not. I know in case it doesn't work, there is always the question of registration of the OS by Microsoft, but I can cross that bridge when I get to it.

  Sorry for the essay I just wrote, but this has been a problem for too long, and I am at a loss to know what to do now (apart from the purchase of another computer). If there are any questions I'll be happy to answer, and I hope we can get this issue is resolved. See you soon.

  

  If you follow this step 3.

  http://www.SevenForums.com/tutorials/675-system-image-recovery.html

  You will need to select "format and repartition disks" as windows 10 will have changed partitions.

• Lost after upgrade to Windows 7 HARD drive protection

  Hello

  After the upgrade to Windows 7 from Vista, I lost HDD protection and integrity monitor.
  Any help would be appreciated.

  Hello

  Visit the Toshiba download page and download these two tools for Vista and install it on your laptop Win7 preinstalled.

  I did the same thing on my Satellite A500 and everything works fine.

• DesignJet 111: DesignJet 111 - printing problems - no printing after upgrading to Windows 10

  Several problems to the upgrade of WINDOWS 7 for WIN 10.

  The HP DesignJet is 'offline' and can't figure out how to change the setting of "online."

  The definition "print directly to the printer" is not.

  Yellow flashing on the printer dashboard - magenta ink cartridge shows empty, but it is full.

  Computer HP printer installed - poster is in the Device Manager - watch "this device is functioning."

  Printer is listed in devices and printers.

  HP Support Assistant doesn't recognize - printer in the list, can not find device during an attempt of "add design.

  Printer turns off or recycle off on after turning on.

  Hello

  If you have a driver problem:

  Remove the driver completely from the computer, then download and install the lates driver.

  Here is the link incase you need

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=4123145 & swLangOid = 8 & swEnvOid = 4192

  Now, the yellow light flashes on the Panel means that the printer needs attention, like:

  -Close coverage which is open

  -Of paper

  -Paper tilt

  -Jam

  -An error code

  If you have 6 columns on the levels of ink instead of 4 is because you have an error code.

  On the following link, you can find more information on how to prepare the error codes

  http://h20565.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=352387 & docid = emr_na-bpp03841

  If you have an error code, the printer appears offline on your computer.

  On this other link, you will find how to check other messages on the printer

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c01669949

• sequences lost after upgrade to Windows 10

  After the upgrade to Windows 10, a project I was working on a lost sequences. How to make a comeback?

  Double-click it in the project Panel.

• Special keyboard keys Bootcamp-lost after upgrade to Windows 10

  I have an iMac of 2014 that was running Windows 7 with Bootcamp.

  I have upgraded to Windows 10 (using the upgrade option if windows) and everything was fine.

  After a power cut I can no longer start Windows 10 so I repaired the installation.  W10 is working now, BUT the special keys on the apple keyboard (brightness, volume, etc.) no longer work.

  I tried to re - download the software and drivers support for Win10 through Bootcamp Assistant, but he asks me if I want to delete the installation of Windows 7 (SEVEN Yes).

  Any ideas would be welcome.

  Thank you

  Download the driver appropriate for your model package specific to install Windows 7 and previous versions on your Mac with Boot Camp - Apple support on a USB2 flash drive and run setup.exe from the Bootcamp folder when it is started in Windows.

• Problems with fonts after upgrade to Windows 10

  After the upgrade to Windows 10. Some of the police are white with black outlines makes it difficult to read a few pages. I refreshed and reinstalled firefox and it's still there. I disabled and deleted all the addons and it's always the case.

  Both pis. My only solution is to delete the font cache. Restart the PC and uncheck the allow the Web Sites to choose their own and simply used the Arial font. I can read very well now. For some reason any double check the last option is by default the text to look like that. Does not occur in Google Chorme then Yes.

• HP 15-r078tu Notebook PC: problem of brightness after upgrade to Windows 10 - r078tu

  I use HP 15-r078tu Notebook PC.  After the upgrade to windows 10 laptop brightness was awkward.  I always work with a minimum brightness.  But after the upgrade of the brightness of the screen is high, even when I set minimum height in power options.  When I keep up it is brighter than before.  And after the upgrade, the brightness control buttons work abnormally.  Reduce the brightness button is increases the slide of the brightness and the brightness button increase it decreases.  After a reboot, it works fine, but only after a reboot whenever you turn on the laptop.  I checked all updates in assistant hp support and updated all the drivers.  I also checked the online solutions for

  1. change the display adapters in Device Manager

  2. check updates

  3 go back to the previous driver and even after change to basic brightness microsoft display adapter is the same (he doesn't) even fit in (buttons) hardware / software (power options).

  

  Nothing has worked.  Any solution please?

  This driver is listed under the W10 drivers section, even if it's for W8.1 and more.

  You might want to try this one.

  This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  File name: sp69589.exe

  If this one doesn't work either, unfortunately, I don't have any other suggestions for you to try.

• Reinstal applications lost after upgrade to windows 8

  Hello

  I have a HP Pavilion g6-1374ea using the windows operating system 7. I have upgraded to windows 8 and lost some installed applications like youcam tools manufacturer and hp, diaognostic software also lost but were allowed to return only on the HP website.

  Yet hp partitioned my hard drive tools, so I can I reinstall any software like this partitioned drive youcam?

  Thank you

  Hello

  An clean install will erase everything, you have any backup or original source to reinstall the programs. You have to do it this way.

  Kind regards.

• Printing 15 files lost after upgrade to Windows

  Recently, I helped my mother with the upgrade of its Windows Vista computer to Windows 7 Ultimate.

  I chose the option 'custom' improvement All were found in the "Windows.Old" file on the C: drive, but it is unable to locate his printing 15 files.

  She managed to locate "Thumbs" or "Vignettes", but we are unable to open them in the print shop.

  Could someone please help locate files printing 15 of my mother?

  The following article, default print shop projects are saved in the Documents:

  http://forums.encoreusa.com/TM.asp?m=40501

  If you upgraded as you noted, then print shop project files must be in the start menu > Documents

  If you still do not see them then go to the section C:\Windows.old\Users\OLD_ACCOUNTFOLDER\Documents

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• ENVY 15 - 3040NR problem of brightness after upgrade to Windows 8

  I have upgraded to windows 8 pro. Put updated and reinstalled all the drivers available on the website of HP drivers. The brightness is not set. I can see the cursor and move it, but it makes no difference. The keyboard shortcut keys are also display the osd for brightness adjustment and it adjusts to the bar, but the brightness is the same. Help, please!

  Hi Executioner,
  
  Remove Windows 8 may be the best solution for you, as support for the brightness, the controls do not seem to be included in the latest video drivers. Windows 8 should work well on the phone for the most part; However, until the real drivers are available for the hardware, issues like these can happen as all functions will not be supported without them. I suggest to keep an eye on your laptop support page above for Windows 8 drivers to be updated (it seems that the last update was 2012-10-18, version 9.0.0.0)
  
  I hope this helps.

• Product key lost after upgrade to windows 7

  Hey,.

  Just thought it should be mentioned that the lost product key of installed software (legitimately) on upgrades of machines pre windows can be retrieved from the file created 'windows.old' on the C: drive, using key finder software. It saved me forking out good money for buying again the likes of office etc because I had lost the key of product from the purchase.

  Notice of the Microsoft support Web site and my software (software4students.co.uk) retailer was to give up and re-buy.

  I couldn't find mention of it on another forum, where my comment.

  See you soon,.

  DOM

  Product key - where to find the Windows product key

  If you bought a computer with Windows preinstalled would a certificate of authenticity (COA) sticker somewhere on your computer. It will say what version of Windows you have and will also have an alphanumeric code at 25 on it - this is your product key. If it is not on your computer look in your documents or on any case of CD/DVD that was included with the computer.

  If you purchased Windows 7, it should be included in the retail box.

  If you purchased Windows 7 online and downloaded that the key should be sent to you by e-mail.

  Top 13 free programs of Finder product key (for Windows and other software):
  http://pcsupport.about.com/od/productkeysactivation/TP/topkeyfinder.htm

  Top 6 Premium Product Key Finder programs (for Windows and other software):
  http://pcsupport.about.com/od/productkeysactivation/TP/premium-KeyFinder-software.htm

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Audio lost after upgrading to Windows 7 on the dv2050us Pavilion

  I ran the windows Upgrade Advisor 7 and it says that my phone is compatible but I seem to have lost my sound. The laptop will play the startup chime when I turn on but that's all, so it must be possible to get sound to work, right? I ran all the on-board diagnostics and it says everything is working properly, but which is clearly not the case. Any help is appreciated.

  Here's my info:

  
  "HP Pavilion dv2050us notebook PC
  Serial number: {deleted private information}
  Product number: EZ718UA

  Try your audio driver for Vista to see if it helps:

  http://ftp.HP.com/pub/SoftPaq/sp35501-36000/sp35682.exe

• Partition recovery lost after upgrade to Windows 10 Tech Preview

  When I bought my Acer Aspire E1 - 510P it came with windows 8 pre installed and there is no CD-ROM/dvd-rom in this laptop. Well, I installed Win 10 and it has messed up the windows 8 recovery drive, it installs the win10 whenever you get back so I lost my windows 8. Is not a big problem because I like window 10 now my problem is the windows 10 is to be free with the first year of sales, but because I don't have my pre installed win 8 that everything would be more I still get the 10 free victory.   The only way to get the rear windows 8 is buying for $50.00 acer recovery media, that I won't buy unless I absolutely have to.

  So I still would be able to get the win 10 free?

  (1) the instructions about test Windows preview 10 said he would remove your ability to restore to the factory. Please ensure that you read the instructions more carefully.

  (2) you don't need to buy recovery for Windows 8 to Asus.  This would have all your drivers, but you can also just get the Microsoft recovery files directly, then go get the drivers from the Asus site.  This way you can make a free complete restoration.

  (3) regardless of the way you collect, you can always get Windows 10 free.