ENVY 15-ae007na / 15-ae100 ENVY: ENVY 15-ae007na / ENVY 15-ae100na

Similar Questions

• Envy 15 t-ae100: light of 15 t-ae100 HP Envy toward the lower right corner of the keyboard

  I just bought a new Envy 15 t-ae100. I see just off the sticker of Intel Core i7, it's a thin slot which has a cover on it. It is the form of a USB port, even if it is a big plus. So far, no light has never shown through it.

  Exactly what is it? If I see a light, is this bad news? My CPU is overheating? Or is it nothing more than a fancy décor?

  
  HP LaserJet p1102w

  Hello

  Are you referring to in the light of the fingerprint scanner - see Page 16 of your Service and maintenance Guide.

  Kind regards

  DP - K

• Envy 15 t-ae100: each Envy 15 t has the same power supply to plug?

  I try by a second adapter for my 15 t-ae100. I see some on sale, that give you in the compatibility section, "envy 15t."

  All laptops of 15 t want to use the same adapter?

  
  HP LaserJet p1102w

  @paulri

  It's just what it takes.

  No need to remove anything.

  Your laptop requires an adapter 90W.

  19.5V x 4.62 A = 90w

  Your safe to use one adapter 90W or 120W.

  19.5V x 6.15 A = 120W

  REO

• HP Envy 15 t-ae100: WLAN upgrade HP Envy 15 t-ae100

  I want to improve my current module WLAN (WiFi Broadcom BCM43142 802.11 b/g/n 1 x 1 + adapter Combo BT4.0 m2), take advantage of my routers features Dual-Band Wireless-AC.

  The service manual from HP for my laptop shows two options without wire - AC:

  Intel Dual Band Wireless-AC 7265 802.11 ac 2 x 2 WiFi + BT 4.0 adapter (no vPRO) - REF: 793840-005

  Intel Dual Band Wireless-AC 3165 802.11 ac 1 x 1 WiFi + BT 4.0 Combo Adapter - REF: 806723-005.

  I see their latest Wireless-AC on processors Intel site is:

  Intel Dual Band Wireless-AC 8260 802.11 ac 2 x 2 WiFi + BT Combo Adapter 4.2.

  QUESTION 1: Intel lists two form for these modules WLAN, 2230 m2 and m.2 1216 factors; the one who fits the HP 15 t-ae100?

  2nd QUESTION: the 8260 Intel can be used in the HP Envy 15 t-ae100?

  QUESTION 3: what would be the advantage of the 8260 Intel on the 7265 Intel? (Says the Intel product brief for the 8260 it is designed to offer a Microsoft Windows 10 full support; but does not explain what that means.)

  Here is a picture of the module 793840-005:

  

  Auction eBay where you can buy:

  http://www.eBay.ca/ITM/793840-005-HP-envy-M7-N-M7-N101DX-wireless-card-WLAN-module-/182039985190?hash=item2a626dbc26:g:hS4AAOSwB4NW1StG

  Here's the auction from the same seller to the 806723-005:

  http://www.eBay.com/ITM/806723-005-HP-envy-15-U483CL-x360-notebook-WLAN-11AC-int-3165-M-2-wireless-card-/162004455419?hash=item25b837cffb:g:VloAAOSwh - 1W44F -.

  Same form factor.

  This is the AC8260 module:

  

  Your laptop has no whitelist, then it can use any adapter wifi with the correct form factor and the number of antennas. The form of factors are slightly different for me, but it is difficult to say may be the angle of the image. I would stick with one of the 2 specified cards compatible with your system.

• HP ENVY notebook - 15 t-ae100 c: cannot find a driver Windows 7 x 64 for Broadcom BCM43142 802.11 bgn adapter Wi - Fi m2

  Hi all
  I recently bought Notebook HP ENVY - 15 t - ae100 (ENERGY STAR) computer CTO laptop and installed Windows 7 x 64 Pro on this subject. I found almost all of the drivers for this computer except for Broadcom BCM43142 802.11 bgn adapter Wi - Fi m2:

  Hardware ID:
  PCI\VEN_14E4 & DEV_4365 & SUBSYS_804A103C & REV_01
  PCI\VEN_14E4 & DEV_4365 & SUBSYS_804A103C
  PCI\VEN_14E4 & DEV_4365 & CC_028000
  PCI\VEN_14E4 & DEV_4365 & CC_0280

  Can someone help me with this?

  Thank you!

  Hmmm...

  See if this driver works instead.

  The package contains the Broadcom wireless LAN drivers and utility which are required to enable the LAN adapter wireless Broadcom integrated into laptops supported that run an operating system supported.

  File name: sp70888.exe

• HP envy 15 t-ae100: touchscreen driver

  I wonder if there is any monitor driver available for the touch screen of my computer laptop hp envy 15 t-ae100.

  I am currently using driver generic PnP monitor with a maximum resolution of 1366 x 768.

  I really need full HD 1920 x 1080, because applications windows becomes too large on this screen size.

  Hello

  Could you send the personalized message for me with the serial number and the product number for me. So that I can which was supplied with your device. Click mahemac, and then you can send details to me. Do not forget these details here.

• Want to 15 t Touch: question M.2 SSD for HP Envy 15 t Touch (model 15 t-ae100)

  I ordered the HP Envy 15 t Touch (model 15 t-ae100) with the i7 processors and 4 GB of memory graphic discreet. The Maintenance and Service Guide accurate that there is a slot available for one SSD m2.  From what I can tell, it's a SATA 3 (not mSATA or PCIe) slot that will be a 2280 SSD card.  Three questions:

  1. where did the m2 slot located on the motherboard?  Adjacent to the wireless network adapter?

  2. is there a screw included on the motherboard for the SSD m2 card?

  3. any compatibility likely questions if I get the EVO of 850 Samsung 500 GB m2 (MZ-N5E500BW)?

  Thank you very much

  Tom

  Hello @space_thread,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I stumbled upon your post on the SSD question and wanted to help!

  The m2 slot seems to be located next to the memory Modules.  There is a Phillips PM2.0x3.50 screw that secures the SSD to the system board.  Your product supports the following SSD:

  SSD (m2) drive

  256 GB - 812708-001

  128 GB, 2280 M2 - 829985-001

  128 GB (Best Buy SKUs) - 820547-001

  Therefore the 500 GB m2 will be not compatible.  I hope this helps.

  Source: HP ENVY Notebook PC Maintenance and Service Guide (Chapter 6, Page 42-43).

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• ENVY 15 t-AE100: Wireless card upgrade - HP envy 15 can support Intel when technology?

  I want to connect my laptop to a docking station.

  The seller sugest me a wireless docking station.  I have faith in him and has no compatibility checked by myself.

  I spent $ 300 on a home wireless network... then I realized that my laptop do not have a compatible card when.

  Currently, my laptop has Intel Dual Band Wireless-AC 3165 NGW 802.11 HQ and according to intel web page, I need a

  Intel Wireless Triband AC 18265.

  I would like to know if my HP envy 15 laptop can support Intel when technology?

  Thanks in advance

  Hello! @PPBog, thanks for the reply.

  No, you can't replace the card wireless when mastering.

  I would like to know if you have any other question!

  Have a great day!

• HP Envy 15 t-ae100: how to enable the keyboard F11 shortcut in MS Office

  I just got my new HP Envy 15 t, and I love my core i7 quad.

  However, I can't seem to get the job shortcut F11 key. In MS Word, it is supposed to go to the next field, but it doesn't. Is there a reason for this? I have to do something to activate these shortcuts?

  
  HP LaserJet p1102w

  Hello

  Hold down the FN key and press f11.

  Kind regards

  DP - K

• -PC portable HP ENVY 15 t-ae100 C: cannot install printer on new laptop Envy

  I have a brand new laptop. I have problems to install a wireless printer, but he does not want to install usb printer. Error - "this computer has USB software not necessary support to allow for the completion of an installation USB." and "this computer does not support of USB hardware enabled to allow for the completion of installation USB.

  He did install a driver and I can print, but I wish I had the full version. I am trying to install the printer is C4200 series.

  Thank you.

  Hello

  Try these steps and check whether that can help you:

  (1) run the installation package of more recent HP on the HP site.
  If necessary, it can be downloaded below:

  http://ftp.HP.com/pub/softlib/software11/COL30096/MP-74842-1/PS_AIO_C4200_NonNet_Full_Win_WW_130_140.exe

  2) open Windows Explorer, type folder in the address bar and press to enter.

  3) navigate to the extracted installation folder, it will start by 7z (e.g. 7z1234s)
  Note: If there is seberal 7z files select the newest one

  4) go into the subdirectory "Setup."
  (5) move, delete or rename the Intel USB System Check (usbready.exe) utility
  6) double-click the Setup.exe executable in the main extraction folder (7zxxxxxx) and follow the installation again

• HP Envy laptop: keys of Action does not not on HP Envy 15

  Hello

  A few days ago the keys to control the brightness, backlight on the keyboard and volume all the stopped working and returned to their previous feature keys (f) in accordance with the suggestion of other posts on this forum, I tried to disable and enable the option in the BIOS, installing drivers HP quick keys, software update through Windows Update and using the HP Support Assistant help desk. Nothing has worked so far.

  I'm on Windows 10 64-bit edition.

  The computer model is HP Envy 15 t-ae100

  Product number: L8Y93AV

  Serial number: [personal information deleted]

  BIOS: F.25-12/16/2015

  Any help to fix this would be appreciated.

  For some reason, the problem has mysteriously decided himself.

• Envy 15 t: upgrade memory and hard drive HP ENVY 15t

  Hi guys, I just bought the HP Envy 15 not touch t (ae100) with the following characteristics:

  -CPU & graphics: 6th generation Intel Core i7-6700HQ Quad Core processor + Intel HD Graphics 530

  -Memory: 8 GB DDR3L - 1 DIMM

  -Hard drive: 1 TB 5400 RPM hard drive

  I have a few questions about it. First of all, my laptop doesn't have a vacant unit of m2 where I can insert an SSD and if not a SATA 3 2.5-inch SSD fits instead of the hard disk without additional fixing or need support.

  Second, is there an empty memory slot to insert a 8 GB of additional ram.

  Any kind of assistance will be extremely useful and thanks in advance.

  No crack m2. From the Manual:

  Only dedicated support of storage SATA m2 (Port 0) (models with i7 processors and 4 GB memory graphics)

  So if you have Intel HD video only you do not have a slot m2.

  Here's the manual for your use:

  Repair manuals

  Yes on the memory 8 GB 2d module:

  Both not accessible/upgradable module DDR3L-1600 slots double channel memory support 16 GB of RAM in the following conƭgurations ● 16384-Mo (8192 MB × 2)

  Access to the memory and hard drive are obtained by removing the lower cover. Technically this is not allowed to the end user if security is jeopardized.

  A standard 2.5 inch SATA SSD to integrate perfectly in the original hardware for hard disk 5400 RPM. It is a highly recommended update. The 16 GB of RAM not so much, but it's one of those things "might as well" If you are determined to go there.

  Let us know if you need more information.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• pictures 1.0.1 quit unexpectedly after printing on HP Envy 5640

  Hello

  I just bought a HP Envy 5640 printer.

  It works very well, but every time I have to print a photo in Photo 1.0.1 NICU OS X 10.10.5, Photos will be leaving after that print is sent to the printer.

  The photo prints fine, but needs pictures to be restarted every time.

  Does anyone have the same problem?

  Any solution?

  Thank you.

  I've not seen posted here - but since you are more than a year behind in updates, bug fixes and new features, you can see a verry old bug that has been fixed many years ago for people who follow to this day - unless he ia a clue right for you m = not updated I suggest you backup and update of OS X Sierra = and Photos 2.0 - this never can solve your problem

  LN

• I have a MacBook Pro, who hates contact my HP Envy 7640 printer all-in-one. Printing can take as long as 10 minutes! If it prints at all! Does anyone have similar problems?

  If I use my iPad to print a photo there is no problem, but if I use the Macbook for the same function, it will be either print it after a long period of time or he'll quit and say "Printing cancelled!" It seems that these problems started after the update. I am running El Capitan 10.11.6. In addition, when you use Hallmark Card Studio for Mac, as soon as I use two back, it will print the first side no problem and then he hangs up and ends by spit the paper without printing the second side! When I got to the printer, everything worked fine, but now...

  Maybe:

  e-with-OS-El-Capitan/td-p/5417344 http://h30434.www3.HP.com/T5/Printer-Software-and-drivers/HP-Envy-7640-compatibl

• How to print multiple copies on a HP Envy 5540

  I'm running OS X 10.7.5. on an iMac. I recently bought a HP Envy 5540, connected wireless printer. It fails to print more than one copy at a time. I see nothing in the software or instructions to change it. Help please!

  It is not clear, put you number of copies in the boxes of Copies and pages?

  Can try this...

  Startup HD, (operation key shift key down to start), run the disk utility in Applications > utilities, then highlight your reader, click on repair permissions.

  All devices which appeared already in your list of printers and faxes list should be added again after resetting the printing system.

  Reset the printing in Mac OS X 10.5.x system +++

  1. To use the reset function of printing under Mac OS System X 10.5.x, follow these steps:
  2. Choose System Preferences from the Apple menu.
  3. On the view menu, choose Printers and faxes .
  4. Control-click on the printer list on the left side of the window, then choose "Reset printing system" from the context menu. If you don't see the list of printers, Ctrl-click on the text "click on + to add a printer or fax" and select "reset printing system...". »
     
     As an alternative, if you have one or more printers from the list, you can click the "-" (deletion of printer).

  http://support.Apple.com/kb/ht1341

  Reset.