ENVY 15-k011tx: Seagate HDD firmware update

Similar Questions

• Seagate Firmware update failed

  I tried to update the firmware recommended Seagate HDD on my Optiplex 780 (from page to download drivers for my machine).  The update is Seagate ST3320413AS, file name B765JC49.zip, published on 28/06/12).  My current display device manager driver is J47 and to drive HARD Seagate model ST3250312AS.  The machine is Win XP Pro SP3, all the Microsoft updates applied.

  During the part of the firmware upgrade process is restarted, here is what I got after following the instructions for "Please wait while files are copied into memory...". DO NOT INTERRUPT THIS PROCEDURE! » :

  Model ST3250312AS SN 5VMXK2JB JC47 generic ATA PCI Bus 0 device 0

  Invalid data... 01:00

  Download the procedure has no

  Failed (in big red letters)

  I hit 'c' to return to Windows and the machine is still very well, but what could have caused this and how important is this update anyway?  I like to keep my machine firmware and drivers up to date, especially since this update is in the category '' recommended '' Dell.  Thanks for any help, Chashood

  Hi Chashood,

  Updates firmware, especially for readers, should in general be applied only if there is a specific problem which firmware was released to correct. So I recommend that you leave things as they are.

• Seagate Hard Drive Firmware Update for the drive model: ST1000LM024

  I have (HP Pavilion dv6-7180se Entertainment Notebook PC). All the drivers for this model installed correctly except the drivers Frimware (Seagate hard drive Firmware Update) and (PLDS Optical Drive Firmware Update). the first one says "this hard drive model is not supported. Model = ST1000LM024"but my hard drive came from the factory, so what is the practice solution to install this driver? images .view of problems:

  This is to seagate:

  and for PLDS:

  Need help. Thank you.

  What mean of these messages, is that these "Firmware updates" do not apply to material in your specific computer. The two "Seagate Firmware Updates" are respectively for the hard drives of 250 GB / 320 GB and 500/750 GB hard drives. Your computer comes with a 1 TB hard drive, which is not subject to updates of the firmware. The "PLDS Optical Drive Update" is for another drive to CD/DVD only installed in your computer and also does not apply. There is no further action to take... Do not attempt to install these updates of firmware, because they do not apply to the hardware in your computer.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• 2950 HDD D80A Firmware Update for the dedicated hot spares

  I have a 2950 III with 8 Fujitsu 146 GB drives installed in a RAID 10 array. The first six discs are configured for use in a virtual disk with the last two records configured to be used as a dedicated hot spare. OMSA describes the version of the firmware of these two disks 0102. I ran the update of the firmware as described here:

  http://www.Dell.com/support/drivers/us/en/04/DriverDetails/product/PowerEdge-2950?driverId=F50fd

  The six drives in the virtual disk just successfully upgraded to the version of the firmware D80A. Two rescue disks have not been tempted. I tried to run the Setup again and Setup note that installed and packaged versions are both D80A, but OMSA said that two rescue disks are always at 0102.

  This is expected behavior? Spare disks are treated differently? If so, the firmware update as they are now or have I trade in the virtual disk to do the upgrade?

  The link does not work for me earlier... it's working now.  There is also a utility 'nautilus' which can be used on Dell readers... it will update all readers of Dell, regardless of the make and model... preventing you from having to download a dozen different services.

  Yes, that is why the update is a failure: Dell firmware cannot be updated with the firmware of the sale to the retail/credits, and retail/Generic firmware cannot be updated with the Dell firmware.

• ENVY 13-D046TU: F.35Ap1 BIOS update kills port HDMI on ENVY laptop

  After installation of the firmware update marked Softpaq number: SP75152, F.35Ap1 Version now four of our laptops (13 "and 14" ENVY ENVY) have a HDMI port not working. The external screens are 'no signal '.

  We spent a lot of time with the help of HP (via Hong Kong, we found ourselves in India). Remote control sessions. All a waste of time. The update of the BIOS is faulty, no system restore cannot solve this problem.

  Same day (June 13, 2016) one of our laptops automatically installed this update of the BIOS with the HP Support Assistant and killed the HDMI port.

  A. is there a way to acquire and install the previous BIOS?

  When can b. we expect a new update of the BIOS?

  C. how the hell did this update of the BIOS pass test? -> 4 / 4 updated computers laptops have a broken HDMI port. We have 7 other laptop on the left who are fortunately not updated.

  Hi there @BugFinderand @DebVancouver.

  Welcome to the Forums of HP Support!  It's a good place to find the help you need, other users, HP experts and other support staff. From what I understand, bothl of you experience the same problem with HDMI after a BIOS update.  I'm happy to help you with this.

  I would, if possible, that each of you try the laptops HP - restore the BIOS to a restoration to the having previously worked BIOS.  The main purpose is to return you to a working state. If this method works for you, obviously do not install BIOS update again.

  Edit: Bugfinder reported that restoration, the method of BIOS didn't work for him, but he had to do several times (4 times in at least one case). I guess you could say that it is true to its name, and I thank very you much for the comments.

  Please let me know if it works for you and if not let me know if there is an error message any. If this does not solve your immediate problem, please mark this message as a solution. Bravo would be appreciated as well.

• 277dw Lasetjet MFP: Firmware Update for my Laserjet MFP 277dw

  This morning my printer has informed me of an update of the firmware, which naturally installed. The printer print is no longer because I have 3 party laser cartridges.  I had heard of tactics HP injet printers, but never thought that they would stoop so low just to force me to buy their cartridges, which for color laserjet, is very expensive.

  I currently have the following HP hardware:

  1. High-end ENVY Phoenix 850-065se Desktop (i7-5960 x)
  2. New portable high-end OMEN
  3. 277dw LaseJet MFP
  4. Chromebook 11

  I am also a partner HP started.

  How much chance do you think it is I will NEVER buy HP hardware again?

  If you use laser 3 rd-party cartridges, do NOT have the HP firmware updates.

  Find another thread to the M277 that seems to relate to yours:

  http://h30434.www3.HP.com/T5/LaserJet-printing/M277DW-supply-memory-error-all-cartridges/m-p/5766705/highlight/true#M294371

  The solution by the user in this one suggests a bad patch as opposed to a deliberate attempt by HP, third block laser cartridges.  It is more credible to me than what HP did with the OfficeJets.  He fixed in downgrading the firmware that atleast confirms that the problem is associated with firmware.

  I commented on another M252 thread on a similar power error message:

  http://h30434.www3.HP.com/T5/LaserJet-printing/how-to-revert-fix-recent-firmware-update-for-HP-colour/m-p/5809720#M297289

  I think its time to crush us this one and get a comment from HP support directly.  If you would be so kind as to contact HP directly through Chat or by phone, we can get an official and timely response.  Then share what you said with the rest of us.  The community can get the word out from there.

  I also found another thread dig deeper and providing a link to an old version of firmware, if you want to try it yourself:

  http://h30434.www3.HP.com/T5/LaserJet-printing/M277DW-supply-memory-error/m-p/5760229/highlight/true#M293984

• SOLVED: Slow wireless internet passthrough after firmware update

  If I first bought a Nighthawk in July 2014 and it was great for a while. Then in the notice happened a few months my streaming services are jumping and more than usual buffering (which was almost never with the Nighthawk).

  I have a connection of 110Mbps (Comcast and through a SB6141 modem), but all of a sudden was only getting 10 Mbps (or less) passthrough on 5 G wireless band (at the beginning of the speed test would sometimes up to 50 Mbit/s, but on a few seconds would fall to nothing..)

  Cable speeds were very good. Always 110Mbps +. Tried several different channels and factory reset the router, wireless speed was still slow. Connected to the Netgear website and submitted a support ticket within 2 hours they sent me with an RMA number and the next day a new unit has been FedEx would be for me. Support rep Tech says it's a problem of material known in some units... I was super impressed with the customer service, it was seriously a no replacement of hassles that took every 15 minutes of my time.

  EXCEPT when I got the replacement router in the next few days, he had the SAME PROBLEM. As soon as the new router is on and I'm connected, I've upgraded to the latest version of the firmware, done a factory reset and down Speedtest. And I had the same problem: speed internet passthrough on all my wireless devices has been terrible. Less than 10 Mbps when I have a connection 110 + Mbps. (Wired speeds were great, it was not a problem of modem or provider).

  Again contacted support and they asked me to download the latest firmware on laptop and upgrade the router manually, do a factory reset before and after the upgrade. They also told me to try to disable WMM (made no difference speed passthrough, but lower my laptop connection between 433Mbps to 54Mbps speed!).

  I tried this... still slow passthough wireless speed.

  The only thing that has changed since I first got a Nighthawk in July 2014 (and I've run speedtests then and had a speed 110 wireless + Mbit/s at the time), is that the firmware has updated several times... makes me think...

  I downloaded the Netgear support the past 5 versions of the firmware for the Nighthawk. http://downloadcenter.netgear.com/en/product/R7000#sear...

  I then manually downgraded the Nighthawk to each previous version (do a factory reset before and after each installation) and ran Speedtest every time. Once I have got down to the R7000 Version - V1.0.3.24_1.1.20 (released 12/02/14) and ran a Speedtest, the PROBLEM has BEEN RESOLVED. Speed wireless devices (laptop, HTC a M7 and iPad Air 2) were all back up to 110Mbps or more!

  Hope this experience helps someone else... If your are affected by the passthrough slow internet speeds and it is not your connection speed (i.e. radio parasites) that is the question, there seems to be a serious problem with the latest latest versions of couple... Try downgrading to the R7000 firmware version - V1.0.3.24_1.1.20

  UPDATE: Yes, I actually tested the speed with several different devices (a laptop HP HTC a M7 and Nexus 9) each on 5G band, all compatible with the latest updates ac. I also used a few test sites of different speed (speedtest.net, comcast speedtest, cnet speed test), not had the same result all devices and hosts.

  However, I actually got in touch with Netgear L2 support for the last month... beta test a few different versions of the firmware of the Nighthawk and even spend more than an hour on the phone one night with a nice guy who told me he was on an island in Southeast Asia, part of the Philippines... This is where Netgear technical support is to halfway between China where they build them and Taiwan where engineers are. After trying all tweak he could think for an hour and not get better speeds wireless, he finally dropped out and wished me a Merry Christmas lol. Not one of these beta firmware made a bit of difference, and I hate the hours that they made me screwing around with them!

  BUT today, they released vR7000 - V1.0.4.14_1.1.50 http://support.netgear.com/product/r7000

  And to my surprise it actually worked! Not only my high speed wireless is returned (120 + Mbps)

  http://www.Speedtest.NET/my-result/4078979293 (laptop)
  http://www.Speedtest.NET/my-result/a/1131321713 (nexus 9)
  http://www.Speedtest.NET/my-result/a/1131332778 (htc a m7)

  but also my Seagate SRD0SD0 previously incompatible (3 TB) USB 3.0 external hard drive works now, too. What a bonus! The reason I bought the Nighthawk was to use as Server DLNA and the monster external HD I picked up 6 months ago only was on the long list of those incompatible with this capricious router.

  But now everything works (at least for now).

  P.S. Maybe it's in my head, but I swear to you that since the last firmware update when running speedtest now or file transfer (while heavy streaming) I can hear the router doing a greater slope electric buzzing/hissing noise is a little disconcerting... I'm not sure my brain fried by overclocked wifi will be worth a high speed in the end...: eek:

• OfficeJet 4635 cancel the firmware update because my ink cartridges are for older versions of the product

  I was happy with my officejet 4635 until I clicked on ok to apply for the HP firmware update. He said that it would improve my printer. However, demand has not said that my ink cartridges may not work if I installed the update. I clicked on ok and the update has been successfully installed. Now I can't print anything because I get an error message saying the I have ink cartridges are designed for older versions of the product. I do not use the new HP cartridges because they cost too much. I used cartridges refilled abacus in Az. Phhoenix which worked fine up until I did the update of the firmware of HP. I need to go back to the old system, so I can print again. I am connected to a desktop computer HP envy running windows 8.1. I'm furious HP to try and force you to buy their new cartridges with an update of something. I think that whoever came up with this update should be fired. Any help with a solution would be appreciated.

  I was told that there is no way to undo the update of the firmware. HP did send me a few ink cartridges so I could print again, but I am still ticked about the way this has been ensured by HP. They have not told me that my old version cartridges would not more work after updating firmware. I think that it is simply dishonest on part of HP and I am sure that other customers have been captured by this update of the firmware. I am sure it was a HP effort going to force you to use their new cartridges. I'll be very careful on the acceptance of the updates from HP in the future.

• Application of NEWBIE - SSD firmware update help

  Hello

  New Member looking for advice on where to start with maintenance of Sandisk ssd firmware update.

  I use an SSD on an acer AOD270 netbook. So, small screen, no CD drive etc. I couldn't not, fo are the life of me, get my Win7 starter HDD cloned on the SSD and start with reliability.

  I made the big jump, installed the SSD, installed Linux Mint with all faults, made a few adjustments and controls for noatime and trim and I am very satisfied with what I have.

  I would now like to update SSD firmware. I searched these forums and a couple other places, but I'm still a little lost. Y at - it a kind soul who can tell me the right place to start or a thread where this issue has already been resolved?

  I would be very grateful. Thanks in advance.

  The SanDisk SSD dashboard notifies you when FW updates are available, but it is for Windows only. Since you are on Linux, you can keep a watch on this forum. If a FW update is released it will be posted and stickied at the top of this map. They will post a link to the ISO standard for the FW. You can burn it on a CD or create a USB bootable out of it. Below, a message from FW update for the Extreme Pro SSD for an example. There is currently no FW for the Ultra II SSD update.

  http://forums.SanDisk.com/T5/SanDisk-Extreme-Pro-SSD/firmware-update-X21200RL-released-for-SanDisk-E...

• Question of firmware update hard drives/RAID

  We have a Server Power Edge R210II with OS MS Server 2008R2 and a Controller PERC H200 RAID (two disc HARD 1 TB Seagate SATA in RAID1).
  Recently, there is a new firmware for Seagate drives on a dell (Package update for MS Windows) support site.
  I really don't want to lose the server :) and never update firmware on the disks on the server with RAID (I've updated the players only on PC).
  Can someone tell me a procedure to update the firmware on my drives? Problems with the upgrade, best practices etc?
  Thanks for any help,
  Marius

  Best practices:

  • First have a backup. Should data not destructive, but everything can happen.
  • Use SUU or Repository Manager to update ALL of your system - iDRAC/BIOS firmware, PERC and other firmware must be updated before the firmware of the HARD drive.

  Most HARD drive firmware updates are bootable, so you just get the utility boot and update.

  You cannot update firmware of the drive not Dell with Dell firmware (i.e. If you bought the retail/generic readers).

• firmware update

  I tried updating my two cinema Display on my iMac (27 inch, end 2013) iMac Intel Core i7 3.5 GHz 32 GB 1600 MHz DDR3 NVIDIA GeForce GTX 775 M 2048 MB tons of time, using all possibilities, but unfortunately not worked.

  What is happening with this firmware?

  Hello RUBENSCOSTA,

  Thanks for this info and choosing the communities Support from Apple. I know how important to get your Cinema Display works again is for you!

  If I understand correctly, you are unable to update the firmware on the LED Cinema Display. I would like to try the following steps to get these working again:

  1 make sure that your iMac has all available firmware updates installed as well:

  On the updates of the EFI and SMC firmware for Mac computers with Intel processor

  2. try to follow the process in this article on the updating of the LED Cinema Display Monitor:

  On the 27-inch LED Cinema Display Software Update 1.0

  3. If you're still having problems, you can see the general troubleshooting guide:

  Get help with your Apple Cinema Display Monitor

  See you soon!

• Airport Express firmware update

  I had a Firmware Update for my Airport Express.

  How can I update? I can only choose ignore, do not to update. In other words, what I did now.

  Zu-updates information to update Firmware as airport-Basisstationen - Apple Support

  It's funny. I think it's a bug.

  Airport-Dienstprogramm 6.3.6 on El Capitan

  "You are not allowed to create or update this content" - funny too.

  This firmware it works now?

  What model is the Express?

  You can do it manually even if it is a bit complicated.

  Re: proxy server annoy 7.6.7 update?

• Wan interrupts the connection after the firmware update

  Looks like the latest firmware upgrade is the source of the problems.

  I've just updated my timecapsule 1 TB of first generation version 7.6.7 and my 3 TB timecapsule new version 7.7.7

  Both are connected to the router of the provider of Internet services and extend the network even in my house.

  WiFi is stable until the upgrade, but now the connection is lost every few minutes or seconds.

  Both versions are later to the respective timecapsules.

  I end up having to downgrade if no solution is found.

  I powered the two market still nothing does not. Redefine the network and tried both hidden and not hidden, yet once nothing doesn't.

  Any ideas on what is causing the problem?

  Well, since nobody seems to have an explanation, and Apple are not out with firmware update after 7.7.7 and 7.6.7 I decided to downgrade the firmware to the previous version. I now run version 7.7.3 on the new 3 Tb Time Capsule and 7.6.3 on the 1st Gen Time Capsule. So far, the network is stable. Using WiFi Explorer Ii see that they use channel 6 and 8 respectively. Signal is strong and no dropouts have taken place so far. Hope the issue is resolved in the next firmware update.

  As I read in another post: firmware update does not solve a problem, you didn't. However, it can create a problem that you didn't.

• TimeCapsule Firmware update 7.6.4 is not possible

  on my Timecapsule is not possible firmware update.

  Airport utility shows me that there is an update, but I have no button to update.

  

  Hold down the option key and click two times on the base station. before an option there will be updated to version, click on it.

  The system will reboot and firmware will be updated.

• Airport Extreme Base Station model bricks A1408 after failed firmware update

  Shown on Macbook Pro iOS X 10.10.5 airPort utility update the firmware available for both devices on my network 3 June 2016
  1 Airport Express 7.6.7

  2 version of Extreme Base Station Airport unknown as not reported as I expected not die

  After the update successful of the AirPort Express, the update cannot be installed on the Base Station firmware.

  After waiting a while, I tried the update again which also failed to install.

  Current symptoms:

  a. the Base Station is hot indicating energy consumption

  b. No. LED light is during the power on self test or during the race

  c. not discover measure on the WIFI network

  d. is not identified on Ethernet connection without light next to the Ethernet port

  e. DC output is 12V on the connection of the power supply works as expected

  f. cannot perform factory reset using the reset button on the back of the Base Station

  Where other devices working on the same power supply as the Base Station that very sensitive to power outages - these remain functional during the attack of upgrading me to think that he has not lost power while firmware update took place.

  My home network is made entirely of Apple devices - should I worry on the application of the firmware updates in the future.

  It's embarrassing and I now Cat5 running through my house just to maintain services.

  I can't confirm the date of purchase, so I don't know if it is covered by the warranty, however, I'd like to think Apple would cover this.

  What I am doing wrong and y at - it a way to recover the device.

  Help

  We have seen a few posts of users who have had the same problem.

  Unfortunately, not a really nothing you can other your advocate Support of Apple.

  Good luck and hope that you will have this resolved quickly.