Envy 17 Fan error at startup

Similar Questions

• T-61 Fan error (false?)

  A friend has a CTO 7661 who was to have a fan problem.  We replaced the fan and it seemed to work fine.

  A month later he became Fan Error on startup, with 2 beeps...

  Hit Escape and works very well...

  BIOS is updated.

  Any ideas on this one?

  Thank you

  Replaced the heatsink / fan Assembly with a new e - bay...

  Solved the problem, the machine works fine now.

  See you soon,.

• T61 pulsing fan and "Fan Error" sometimes at startup

  I have a T61 (7661 - 12G) which is a few years old now. I do not buy it again.

  Recently, the fan started pulses at 1-2 second intervals from time to time a little. Also several times starting it is showing "fan error" and close immediately.

  I did the usual thing (air duster, take it to bits and clean it properly), but this makes no difference.

  I did some research and it seems to be a good idea to replace the fan and re-apply new thermal paste to the CPU.

  This sounds like a reasonable approach, or are there other causes of this problem?

  If it is not overheating then the heater works properly, so a fan is all you need. It in, I would replace the thermal compound with Arctic Silver, it's much better then the dough of the plant which tends to dry out and crumble after a few years.

• "Fan error" on Thinkpad X201s

  Hello

  My surprisingly overheated X201s and soft-shutdown. After reset of the interrupted BIOS startup just to say "Fan Error" and stop again. Has anyone seen this problem before? So far, the fan worked!

  I removed the keyboard and as soon as I press the power button, I can see the spin of fan for a few seconds then stops - it does not restart and said: fan error. I've blown all the dust out, and the fan turns very freely - is there anything else I should try before I have send the laptop to be repaired (it is still under warranty, but it's a little annoying!)?

  Thanks for any help,

  Edward

  The fan runs a little slow or temperature sensor circuit is sick. Send it in. It's a pain, but it is the best choice.

• Error at startup. Need serious help.

  I am not able to perform a search on Google.com and especially all the search engine, it's evidence of a connection not approved and if I get complete site then it works some time (for example www.facebook.com). I tried to configure the real clock timings. In addition, even after download ad-blocker, I always face problems ad.

  What is the message of the error at startup? Is it in the page itself or a pop-up?

  There are several potential causes of generalized certificate errors. It's Firefox is not completely set up to work with your security software (or using Firefox's Reset feature, which means that set up again). But the malware is also a potential culprit.

  You have added all the exceptions (using the Add Exception button in the section "I understand the risks" of the error page)?

  You can check that your Firefox connection settings have not been changed:

  "3-bar" menu button (or tools) > Options > advanced > tab mini network > button "settings".

  You can try 'No proxy' it.

• I get this error at startup: mozupdate.dll missing. What should I do

  mozupdate.dll error at startup
  I installed a new copy of firefox and the problem remains.

  Hello

  Please see this.

• Satellite L850-1V0 - Fan error popped up while I was playing a game

  Recently, I got an error that displayed so I was playing a game, he said that the cooling fan had a problem and that I should stop it immediately and send it for service.

  It's the first time that I had this, I have a program called Speccy that tells me my computer's temperature and all these other things, the temperature is at its normal level and I've never had anything telling me: I had a front fan error.

  For safety I changed the battery of balanced ECO which decreased the temperature a bit more, I put my hand on the battery and is not still warm, I can hear the fan and I can feel something out the gills.

  Well, it seems like it was only false alarms.

  Usually the laptop would shut down automatically in case of high temperature. This is the kind of internal, protection against overheating.

  In any case I recommend you monitor the temperature level and keep an eye on the cooling fans.

  In addition, check if the new BIOS is available. If the new BIOS has been released, try the update.

• trayyapp error at startup

  I downloaded a few Assistant s/w and hp driver printer for my dv4 and maybe a few other s/w HP.  Now, I get a Trayapp.msi error at startup.  I don't see no trayapp s/w can I specifically reinstall or remove.  How can I tell what s/w must be reinstalled to get rid of this error?

  It is likely a piece of software which it was installed or uninstalled recently. You have installed an HP printer on this computer?

• Realtek RTL8101 PCI Ethernet is in error during startup

  Hi all
  I have EDT recently bought by Satellite A200-1CN notebook PC series. I'm having a problem at the start of the system that has Windows Vista installed.
  The Realtek RTL8101 PCI Ethernet v 1.02 (060510) gives error during startup. The error is to run is as follows

  PXE - E61 Media Test failed
  MOF: Left PXE ROM

  Can any help with this problem

  Concerning

  Hello

  Hmm you ve you have a problem with the Vista boot! :|

  Usually, this message appears because the BIOS can not find a source of start-up as ODD or HARD drive and then try to boot from LAN.

  Perhaps the BIOS can not find HARD drive due to a hardware problem.

  Hmmm. First of all, you should try to change the boot order in the BIOS. Put the HARD drive as first boot device.
  Save the settings and try to restart the laptop. If it is not possible to start the Windows Vista I guess that HARD drive is dead!

  Have you tried to reinstall Windows Vista using the Toshiba Recovery CD? Check this box!

  If all this procedures don't help I recommend you contact the ASP in your country.
  The technician must check the laptop and if necessary, it should replace the HARD drive.
  Your warranty is valid so that everything should be done for free.

  Good luck

• T440 giving Fan Error

  I have a T440 which gives a fan error message and then stops immediately. And of course it just went out of warranty last month! Ideas like how to fix?

  It's a pain that it just went out of warranty. This seems very early to a fan of die. I don't know how handy you can do things yourself. You just need a screwdriver, but some people are comfortable doing things like that and some are not. I guess the problem is the fan itself, because the only other involved part is the motherboard which is a much bigger problem. I'd say in 90% of cases, it's the fan itself. The fan is accessible by removing the bottom cover. The fan can be removed and replaced. On newer machines, I always offer a new fan, as opposed to a second-hand, that should come pre-pasted. Here is a link to the service manual. See what you think:

  https://download.Lenovo.com/ibmdl/pub/PC/pccbbs/mobiles_pdf/t440_hmm_en_sp40a26000_01.PDF

• ThinkPad X 220 fan error

  Hello community of Lenovo,

  Today my Thinkpad x 220 has stopped working and gives me a fan error. Is anyone able to advise how to solve this problem?

  I was able to reboot once since but had no chance once again. Previously I had overheating, problems that might be related (idk).

  I checked the connection between the fan and the motherboard already: it is connected propperly.

  Other forum posts suggest a supply line by pressing several times the power button for 10-30 seconds (depending on the poster) without sources of power attached. This has not worked.

  of @richk has explained elsewhere that it would be maybe due to the fan, (b) a fuse or fan sensors (c) being broken. As he suggests, I checked if the fan until the fan error is reported (by Visual inspection after removal of the keyboard). The fan moves a little bit as if it were to start turning. However, it is not really turn and just drops in the same position.

  Unfortunately, I am long out of warranty and cannot but to send my ThinkPad to load for them to tell me that they cannot fix.

  Anyone know what is the most likely cause? Replacing the fan will solve the problem? It is better to send to sustain even outside the warranty?

  I also read here in the forum that the fan lubrication bearing solved a similar problem for some users. I should try that?

  In short: is there hope to get my computer working again or just won an expensive paperweight?

  Any help is appreciated.

  See you soon,.

  lenovofanerror

  Hello

  my suggestion is to replace the system of cooling, together. Do it yourself.

• HP Pavilion 500 series pc: • HP - printers - HP ENVY 4520 series - error 0 x 80240017

  Members HI Hp reset recently I had to have my desktop so I could get back in and get back into the office.  When I got my desktop back I went into the settings and the system and discovered that my desktop computer was not on the construction lasted 10 Windows so I re downloaded the tool of reastion media and downloaded and installed the Witch of the construction lasted is 1511.  Then I also reinstalled my Hp Printer using the installation cd of the printer following hp without errors or problems at all.  What I have a problem with, it's that Windows update has the same printing hp for the hp printer software but the problem is that windows update cannot download and install the Hp printing software following car and error keeps the details below:

  • HP - printers - HP ENVY 4520 series - error 0 x 80240017

  I'm under 10 Windows Home Edition.

  I was wondering is their someway to hide this update in windows update Windows 10 feel free to explain.  I should also mention that I'm not comfortable to do stuff in the registry.

  Thank you.

  Hi @funny35,

  I'm glad to hear that you were able to find a solution to the issue of the update.

  Please click the "accept as Solution" and the "thumbs up" button up on top of my first response above and other similar issues may find the easiest solution.

• HP PhotoSmart Essential error at startup

  Hello

  Until the other day I had any problems when I start my computer.  A few days when I started the computer I got a pop up titled 'HPPhotosmartEssential' box and it said "Please wait while Windows configures essential HPPhotosmart" and a few seconds later another popup box titled "HPPhotosmartEssential" the following information - "there is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your personlel provider or support package ".

  I have more the OfficeJet J4680 printer installation CD but I don't have the software to download so I opened it upwards and it was installed in the temp folder.  of which I went to start and typed folder and opens this file and follow these steps...

  Open the file "Setup."

  Open the folder "Scan". Right click on the "scan" (windows installation package) file and click 'fix '. If no error message appears, once again, right-click on the file and select "install".

  Return to the folder and open "bpd_scan" installation folder. Right click on the file 'bpd_scan' (windows installation package) and click 'fix '. If no error message appears, once again, right-click on the file and select "install".

  When I clicked on repair I received a new window bpd_scan error message that says: Module C:\Program HP Imaging\bin\hpqebpd2.dll failed to register. HRESULT-2147220473. Please contact support staff. I clicked on OK & following the next step

  Return to the folder and open "destinations" installation folder. Repeat the process above and that the repairs happened well.

  I restarted the pc but the problem persists.  (I deleted the shortcut of this file that was located in start > programs > startup - I deleted the shortcut of this file (called HP Digital Imaging Monitor).)

  I also opened a command prompt (run as administrator) and type in regsvr32 hpqebpd2.dll and who stated DLLRegister Server in hpqebpd2dll.

  I restarted the pc, but when I click on the file to open it (even if I do a right click and run as administrator) I still get 2 contextual window boxes.  And when I click OK or cancel the boxes still jump upwards of 3 or 4 times until it stops.

  I noticed that when I clicked to run / open this file it will appear in the lower right but I always get these boxes popup several times.

  Nothing had changed from one day to the next on the pc so I don't know why the problem occurred suddenly.  I ran several scans online for viruses and malware, as well as a boot scan, but nothing was found.   I have run ccleaner and noticed that he has found a missing DLL to C:\PROGRAM HP IMAGING\bin\HpqSRmon.exe

  I am running Windows Vista Home Premium with all current updates and is an officejet j4680 printer all-in-one.

  Others want a complete uninstall of the software to uninstall Panel or revo control printer and then reinstall the software I don't know what I can do to possibly solve the problem.   The printer software is version 14.

  Other possible suggestions or solutions would be very appreciated.

  TIA

  I'm glad you responded! I wanted to share with you all what I have solved my problem last night after having carefully followed the steps that I mentioned above. This way I can now explain the steps in a little easier way. When I started to experience this error on startup, I thought it was related to my network because it happened also when I turned the printer on and outside. I have to press OK, Cancel, etc. what felt like 50 times before my error message disappeared. I know it's a different file, but the symptoms are exactly the same, since an uninstall did not resolve the question or fixing things in Device Manager. It seems that the link you have provided very simple steps to a L3 uninstall. The great binding, but I found a simple way for the common user. Here are the steps that I took last night and my computer worked never better:

  1. I did a normal uninstall first. Don't forget if you have a USB cable, wait that uninstalling invite you to remove the cord but also before Setup tell you plug it back in. The complete uninstall took almost 25 minutes.

  At the end of the uninstall, you will get a prompt to click 'Finish', however I didn't click it. I've been waiting to restart my computer after I ran the disk cleanup utility in all programs > Accessories > system tools > disk cleanup.  This process took almost an hour.

  2 after disk cleanup was complete, I restarted the computer by clicking on the button 'Finish' the HP software that was always on my desk.

  3. after the restart, I followed the link to CCleaner and would like to mention to people not too savvy to be careful by pressing the green button 'Download now' more than once computer. It seems that there are a handful of commercial products that look like they tried to trick you into downloading the software.

  4. once the download is complete, CCleaner has opened and seemed much easier to use than I thought. I chose the tab register on the left, "scanned for any question," then selected difficulty scan after you have backed up files to remove (the software asked me if I wanted to save that I did). Sometimes you can scan up to three times until all problems have been corrected. As easy as it sounds, I still highly recommend reading so much about this product before installing it (see previous posts). This process was done very quickly, so I decided to use the file cleaner as well. Who did take a long time - about 30 minutes.

  5. this time, I rebooted by computer by stopping completely and then back on with the power button. I always liked this method instead of select "restart" your computer.

  6. I have confirmed my operating system on my computer will start and by doing a right click on 'My Computer' and selecting Properties at the bottom of the box grey just to make sure that I do not install the HP bad software. Then everything just re-installed the software at www.hp.com/support by typing the name of my printer tab support and drivers. The whole installation process took 20 minutes and even got an error at the beginning of my extraction process which stated "the Extraction failed. File is corrupted. "My heart is Serra for a bit, but after having clicked on the button"Download"once again, I have had absolutely no problems my network printer installation.

  7. I would like to add, during the installation process, you will see a screen that says 'Click here to customize' and I deselected product Participation, HP Update and some other useless tools, but I kept the driver, the solution, HP Imaging Device Center (which is what was causing my problem) and HP Photosmart Essentials since this is what was causing the problem. I had no problem after that.

  8. Finally, I did a reboot to ensure that all boot errors went away and the computer booted faster than ever with no error. Final test of all the features worked great. I was excited to try these steps on my own last night so that I could provide a way to rephrase things for all those too afraid of getting deep into their computer files. I hope as the method to keep it simple you will also feel because that please don't forget, using third-party software comes with its own risks. Let me know if this does not work, and then we can speak of an uninstall of L3/L4.

• Lenovo T530 "Fan Error".

  2 days ago I started getting the error message "Fan Error" after starting my computer (T530). Before it gives me the message there is a beeping noise hard. I'm going back to school soon and I hope that there is a way to fix it myself without having to buy a new fan. I'm really bad with running on the computers. I am wonderig if I have to clean the dust out of it, or shift the fan or something like that. Hope there is a way to have a quick solution. Thank you all.

  You can try to clean the dust out of the vents and the fan blades. You can also try lubrication of the bearings of fan with a very light oil. That could revive the fan enough to stop "Fan Error" messages for a while. It was enough to revive the fan on my T430s a few months ago, when I'm "Fan Errors" on a trip.

  However as richk says, you really should get a new fan, especially if the T530 is still under warranty. Your fan is very likely to fail again. So I would say do you now before you go back to school instead of have to do with a date school hanging over your head.

• notice of fan Error at the beginning

  Hello

  I'm Indonesian, I have hp pavilion notebook pc g4 model g4-2308tx

  I have a problem with the internal fan, and if I turn on the laptop I get the notice on fan error (909)

  so, what can I do to solve the problem on the internal fan? Thanks before and just answer this

  Hello
  
  Try to update all the windows updates through the control panel & HP updates drivers & BIOS from the link, select your operating system - click Next - scroll down to update BIOS & drivers:
  
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?swlinkmsg=100&cc=us&DLC=en&docName=bph07165&LC=en&product=5348564&query=G4-2308tx
  
  Is there a noise? You hear the cooling fan running?
  
  Keep the laptop cool with cooling pad.
  
  Test of hardware failure, make a vast & fast test drive & memory. Here is a link to help you: http://support.hp.com/us-en/document/c03467259

  If none of the troubleshooting work & if you get the error message of fan, you will have to go for replacement of it.

  Here's the Manualfor your product.

  The cooling fan HP part number is 680551-001 & while the heat sink assembly (includes the thermal material replacement) please refer to Page 22, 23, 81-83 of the manual after verifying your product specifications.

  Hope this helps,