Envy TouchSmart 17-J137cl: hp envy 17-j137cl

Similar Questions

• 17 - j137cl: HP Envy 17-j137cl plays not Blu Ray

  HP Envy 17-j137cl plays not Blu Ray disc

  Hello

  It doesn't have a drive to read drive BlueRay:

  http://support.HP.com/ID-en/document/c04467663

  There only: a "SuperMulti DVD burner".

  Kind regards.

• Envy of HP Touchsmart M6 - k022dx: network (Ethernet/WiFi) for HP Envy Touchsmart M6-k002dx drivers?

  Hi all

  Had to replace a dead hard drive and installed a new one with Windows 7 on my niece envy Touchsmart M6-k022dx. Can anyone recommend Windows 7 drivers for this model of work. I thought that I did need to get the ethernet/wifi working so that I can update the Windows 10 laptop and then install the drivers of page drivers. Any recommendation is greatly appreciated.

  Thank you

  You are the very welcome.

  See if this driver W7 IDT Beats Audio works on your model.  Install and reboot the PC.

  This package contains the driver that allows to the Audio IDTHigh-definition (HD) in models of laptops that arerunning an operating system supported.

  http://ftp.HP.com/pub/SoftPaq/sp64501-65000/sp64958.exe

• HP ENVY bow 27-k119 TouchSmart all-in-One desktop PC

  Hello. I have

  HP ENVY tilted 27-k119 TouchSmart all-in-One desktop PC, after the upgrade to windows 10 I have no audio, I tried to download beat audio SUPPORT HP, without success. Can someone help me. Thank you

  Hello

  No support Windows 10 from his homepage. Please try the following driver for Windows 8.1:

  http://ftp.HP.com/pub/SoftPaq/sp64501-65000/sp64642.exe

  Kind regards.

• HP TouchSmart 23-d000el ENVY: Problema Windows 10-> Audio: IDT High Definition Audio CODEC

  Model: HP ENVY TouchSmart 23-d000el

  Processor: Intel (r) Core i3-3220 CPU @ 3.30 GHz 3.30 GHz

  Installation of memory (RAM): 4.00 GB (3.87 GB usable)

  System type: 64-bit operating system

  Pen and touch: touch support with 10 points of contact

  Windows 10 home

  After formatting I was surfing the internet, when I noticed that the sound was not working, I tried to solve the problem: I tried to install the drivers but it says: "the device driver is detected, but it was a mistake during the installation." and "a device attached to the system is not running."

  I don't know what to do, can anyone help me?

  (I want to clarify that I am Italian and so everything is perfect.  ^^ )

  Hi there @RandomProbllama,

  Welcome to the Forums of HP Support!  It's a good place to find the help you need, other users, HP experts and other support staff.  I understand that the audio does not work on your computer after you reformat.  I'm happy to help you with this.

  Looking at the page "Download drivers and software" HP ENVY 23 - d000el TouchSmart all-in-One desktop PC , I see that there are no specific drivers available for Windows 10.

  Why did you reformat the system?

  What method did you use to install Windows 10?

  If you check in Device Manager, which appears in your sound devices?

  Have you tried to remove any audio device and then searching for the hardware changes?

  Please let me know.

• Internal speakers on my HP ENVY TouchSmart all-in-One desktop PC 23-d027c no longer works

  Hello

  I just bought my HP ENVY 23-d027c TouchSmart all-in-One PC of office a few days ago.  It was working fine until I tested the speakers.  When you watch youtube videos, the internal speakers will stop working, while the mute button is not enabled.  It takes a few minutes, and then the speakers work again, only to cut out once more.  IT IS SO FRUSTRATING!  What's weirder, I put a dvd to see if it was the speakers, but the audio on the dvd seems to work very well.  Also, when I use headphones, the speakers work fine.  I don't know what the deal is, but according to my research, this seems to be a fairly common phenomenon on HP computers.  I'm struggling on the Exchange on this computer.  IF this isn't a simple solution, this machine will return to the store!

  Help, please!

  Thank you in advance!

  Wayne

  Hello MakCo,

  Your speakers are not working correctly.

  Go to Device Manager, uninstall the IDT audio and restart the computer.

  Uninstall it and reinstall the audio driver.

  Here is a link to the Device Manager.

  Do a hard reset.
  
  Turn off the computer.
  
  Remove the power cable and battery.
  
  Hold down the power button for 15 sec while booth energy sources are deleted.
  
  
  
  This should reset the hardware in the computer.

  That you put it on press the F10 key. This will load the BIOS setup utility.
  
  Press F9 to load the default values.
  
  Press F10 to save and exit.
  
  
  
  When the computer starts up, check if everything is working.

  I would like to know how everything goes

  Nice day.

• ENVY TouchSmart m7-j120dx: need to upgrade tips - ENVY TouchSmart m7-j120dx

  I have the mobile suite:

  ENVY of HP TouchSmart m7-j120dx Notebook PC

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-TouchSmart-M7-J100-notebook-PC-series/540117...

  I want to spend as a result of:
  500 GB SSD
  16 GB OF RAM

  From the following link, I discovered that the RAM should be SO-DIMM DDR3L-1600 with 1.35 volts
  I also know, I need this cable and caddy:
  http://www.Amazon.com/HDD-cable-Caddy-envy-J000/DP/B00GIGJYBG

  Now my questions,

  1. I currently have two 4 GB of RAM at 800 MHZ. If I buy a 8 GB 1600 mhz and use with one of the 4 GB of RAM I have, it's going to work?

  2. What is the maximum memory supported by my laptop? The first link, it seems to me 16 GB max.

  3. I need too amazon links for compatible RAM for my laptop for the 8 GB and 16 GB.

  4 I need also links amazon to compatible SSD drives. I'm looking for 500 GB.

  Thank you
  Jay

  Hello

  The following manual will answer most of your questions:

  http://h10032.www1.HP.com/CTG/manual/c04091762.PDF

  1. not all the RAM sticks are the same. My suggestion to use Crucial to get the right result:

  http://www.crucial.com/USA/en/memory-info

  2 Max is 16 GB as mentioned on page 2 of the manual,

  3. as #1 above.

  4. all standard SSD can do, you can see as Crucial to the right, and you can buy on Amazon after obtaining the right of Crucial.

  Finally, you need ONLY the caddy if your goal is to install 500GB SSD on the second span.

  Kind regards.

• HP Envy 15-U483: information required for HP Envy 15-u483 ultrabook x 360 Touchsmart

  Hello

  Recently I went through a HP product available in our region (HP Envy 15 - U483 Ultrabook x 360 Touchsmart), it seems good and perfect.

  I searched online for the product mentioned on local shops, but I need some information that i cannot explore stores staff and even I am unable to find it online on review of HP product for this specific model.

  Necessary information:

  1) made the model contains an Ethernet (RJ-45) Jack?

  2) although this model is supplied with default Windows 10 Home; But is it possible to change with Windows 10 Pro (to obtain more features network/domain)?

  Would be grateful for the guide and help.

  Kind regards.

  The specifications of the product are here-shows ethernet:

  http://support.HP.com/us-en/product/HP-envy-15-U400-x360-convertible-PC/8499298/model/9111911/document/c04866033/

  You should be able to upgrade to Pro by purchasing the license from Microsoft:

  https://support.Microsoft.com/en-us/help/12384/Windows-10-upgrading-home-to-Pro

• TouchSmart HP ENVY 15-j134na: TouchSmart HP ENVY 15-j134na Notebook via microphone internal;

  My computer laptop TouchSmart from HP ENVY 15-j134na has an internal microphone, I can't find any reference to an i but I can't talk to Cortana!

  Them, no mention in the getting started guide has found!

• TouchSmart HP ENVY 17-j017cl: the recovery attempt failed. Select one of the following buttons.

  I have a

  HP ENVY 17-j017cl Notebook computer Touchsmart I bought 4 DVD for HP Recovery supports a month previously, when I I want to recover I get this error explained below.

  I was trying to fix it, I did the following;

  1. turn on the wifi

  2 bios date was set before the 22/06/2014

  3 reset the default bios

  BUT THE ERROR PERSISTS.

  

  By selecting Save Log asks to insert a USB key which shows essentially the same message as details (see below).

  

  Message;

  [15:35:01.68] ChkErrBB.CMD: detect an error in the PININST_BBV.

  [15:35:01.68] ChkErrBB.CMD: check c:\system.sav\logs\BurnBootWarn.log

  [15:35:01.68] ChkErrBB.CMD: or, visit c:\system.sav\logs\BurnBootMerge.log

  Selecting retry invite you for the recovery media, essentially the first DVD of the media of recovery sent by HP.

  

  There are 4 four total drives, 1 to 3 are recovery DVD and an extra drive

  Hi there @ako89kurdish.

  Let me welcome in the HP support community where you can ask questions, find solutions, and get help with problems you encounter.

  Cables and devices to disconnect all the connected such as personal media players, USB drives, printers and faxes. Remove support for internal hard drives and remove any recently added hardware internally.

  It may be necessary to disable startup secure in the BIOS to start the computer using recovery media (CD/DVD or USB key).

  The new recovery for 2015 fall update manager must be downloaded and installed to successfully carry out a recovery of the system using HP Recovery Manager.

  It takes a minimum of 3 GB of free space to install the update in the Recovery Manager.

  Do you back up all personal files and read all of the instructions required warning before performing a system recovery? To backup your files will result in a loss of files and information you don't want to lose.

  To get the instructions back up and save your files, see back up your files (Windows 10: 8).

  The full recovery process may take 4 to 6 hours or longer to complete. For best results, the computer must not be connected to the Internet. The computer will restart several times during the process. Do not turn off or interrupt the recovery process until the prompt to log on Windows.

  Here are a few links to a thread in forum where other people have experienced similar problems and solved it: detect an error in the PININST_BBV

  I also found the Troubleshooting of HP system recovery document for you. Please follow the troubleshooting steps in this document to help you with the attempt of recovery failure.

  This answer solve your message or question? If so, please share the good news! Inform others that this answer was helpful by clicking on the accept button Solution. You can also show your appreciation by clicking on the laurels.

  Thank you for your participation in the Forums of HP where we want to help you as well as others who may encounter a similar problem that you have. If you need assistance, I would be more than happy to help! Please just re-post with detailed troubleshooting results!

  Have a great day!

• HP envy 17-j017cl touchsmart: when recovery is complete. My 64 bit of windows 8 is not active.

  HP TouchSmart PC ENVY 17-j017cl laptop

  I bought 4 recovery for HP DVD media.

  When duly get filled. My 64 bit of windows 8 is not active.

  A helpe me?

  Thank you microsoft is helpe me and my problem is solved.

  Spoiler (Highlight to read)

  

• Disable the touchscreen for TouchSmart HP ENVY 15-j173cl Notebook PC

  The laptop:

  HP Envy TouchSmart 15 (15-j173cl) PC notebook

  Windows 8.1 Pro

  The problem:

  I use an external monitor, so my laptop is usually closed.  Randomly, my touchscreen think something is in contact with her, which disrupts everything I do.  I would like to completely disable the touch screen, because I do not use it.

  I thought that maybe the lock was not shut down properly, but the screen resolution changes when I close the laptop, so that it KNOWS that it is closed and switches to the right resolution for my external screen, but it IS NOT to disable the touch screen, and little land or something is in contact with it, changing where my mouse is pointed where I type, etc.

  I tried to clean the screen and the keyboard with compressed air.

  The problem occurs randomly; Sometimes, when I'm CAD for the day, sometimes after hours of work.

  Hello, @rockspeak
  
  Welcome to the HP Forums.
  
  I see you want to disable the touch function in your display for portable computers. I will help you with that.
  
  You can do this by going to Device Manager > click on the + or > by Human Interface Devices > right click on the touch screen to HID-compliant > choose disable. This will have disabled the touch capability.
  
  I would like to know if it works for you.
  Thanks for posting on the HP Forums.

• ENVY of HP TouchSmart 15-j053c: need Driver Audio for HP ENVY 15

  While trying to solve the problem of automatic adjustment of the volume for my laptop, I accidentally deleted the sound card driver.

  I did a hard reset hoping it would fix itself, the IDT Codec appears in Device Manager, but it is not functional. Try to update in device to an error Manager sons (connection WiFi certainly to work properly, is not a problem of the internet).

  I went to the page of the devices on the HP website to download a replacement, but no drivers were found.  I hope that this is a problem with the site and not that the drivers have been abandoned.

  Please provide the drivers!

  Until they are restored:

  (HD)-Audio-Driver-v.6.10.6457.0-for-Windows-7-64-bit-free https://us.driverscollection.com/_47406053013678b064cd6288957/download-HP-envy-TouchSmart-15-j053cl-IDT-high-definition-

• 8.1 Windows Pro update the problem (from Windows 8 Pro) on Envy 23 TouchSmart all-in-One...

  Hello

  I have a HP Envy 23 Touchsmart all-in-one that I bought a year ago (12/2012). It comes preinstalled with Windows 8.

  System information:

  (a) Intel (r) Core i7 - 3770 S CPU @ 3.10 GHz

  (b) 8192 MB of RAM

  A few weeks after that I had bought the system, I've upgraded to Windows 8 Pro with Media Center that I bought through Microsoft upgrade program.

  Last week (19/10/2013), I saw the option upgrade to Windows 8. 1 in the store and decided to upgrade.

  After a few minutes, I got a prompt asking me to restart the computer, and I did.

  However, I noticed that the screen has turned white, but it restarts not really - I have seen that the hard drive light was still flashing and I waited for about 15 minutes. I know it does not restart because if that were the case I would have seen the HP logo on the screen of the BIOS. A little later, the system entered into mode 'sleep' (at least the light blinked slowly as if it was the sleep). As it was late at night, I decided to leave the system alone and decided to check on it the next morning. The next morning, he was still in mode 'sleep' (as I feared) - when I tried to wake up from her sleep by moving the mouse/hit the return key, he did the exact sounds as if he were to wake up from its sleep (as it always does), but the screen is still blank. The light power button lit up constantly indicating he's awake now.

  At this point, I decided to turn off the system by holding the button for a few seconds. To restart, I saw the HP logo on the BIOS boot screen and the screen went white and nothing came.

  So I decided do a system recovery using my Windows 8 recovery CD and turn off the system with the CD in its niche. This time, the system came and began immediately to restore my OS to a previous version.

  After connecting to the system recovered, I received the following message:

  "Could not update for Windows 8.1.

  Sorry, we could not complete the update Windows 8.1. We have restored the previous version of Windows on this computer.

  0xC1900101 - 0 x 40019.

  I tried to reinstall Windows 8.1 a couple of times after that. Once to disable all non-Microsoft services and disabling all startup programs. Always the same result.

  I have no antivirus software on my other system protection of Microsoft default system software.

  Any help, greatly appreciated.

  Thank you.

  I have disabled active secure boot existing starter and the update worked.  Now we get the error of watermark "secure boot not configured correctly.  But I have re-enabled secure boot and the error disappeared.

• Second monitor on 23-d060qd ENVY TouchSmart?

  Windows 8 pro. I'm looking to extend the desktop, no mirror. If necessary to support this feature, I'm ready to buy the graphics card as an option.

  Here are the specifications and configurable options for the HP ENVY 23-d060qd CTO TouchSmart all-in-One computer. Based on these specifications I see only an option for a HDMI input, but not video output of any kind (VGA, DVI, HDMI, or DisplayPort). In general, computers all-in-one HP require the use of a USB-to-video adapter as the EVGA UV more + UV39 or EVGA UV more + UV19.