EoS the MFELX1

Similar Questions

• What kind of lenses (both Canon and after walking) fits my Canon Rebel T1i?

  I used my kit lens to my RebelT1i and it works fine, but now I'm ready to start investing in new lenses, but with all the different types available, I'm not sure how know what suits. EF, EOS, etc, if I choose to invest in 'other than canon' lenses is there a way to know how to choose one that suits you my rebel? I am even more confused when it comes to buy filters. I know that he should ' t matter with filters if it is EOS, the EF or what ever, but if I wanted to buy a f or polorized stop or a UV filter, for example, should I buy a new one for each lens? are there adapters for them to adapt? And just so interested in opinion, do you prefer lenses macro, or tubes macr and why?
  Thank you!
  Danny

  Your camera EOS, which has an APS - C size sensor, is compatible with all EF or EF-S mount. Goals EF - S are not compatible with the 5 d, 6 d, 1 d and 1Ds series cameras as well as 10 days and older.

  Here is a list of the names of the factory lens that are compatible with your body EOS (only for APS - C in bold).

  Canon - EF-S and EF

  Sigma - DC and DG lenses.

  Tamron Di-II and Di

  Tokina - Dx, Dx-IIand FX

• SX 500 action shots

  need a good setting for action shots for my new sx500is all my sports shots are very unclear

  Shooting action & sports with a P & S can be a challenge, but the General rules are the same as for the DSLR, you will need to consult your manual to see the things you can take control to use the information already online here.

  http://forums.USA.Canon.com/T5/EOS/the-50D-has-a-sports-mode-what-is-the-same-mode-on-the-7d/m-p/152...

• Series DX and VCS

  Hi all

  I heard a rumor that the DX series will support from direct entry to VCS.

  Is it true or I have something wrong?

  Thank you!

  I think the rationale is more in the sense of what they want to eliminate gradually the EX90, but until the DX80 can be registered on the platform of VCS, they don't have a replacement for her product.  I was led to believe a number of discussions that this feature could come at the DX platform in a software version later this year to allow them to EoS, the EX90.

  If you really want to know, the best would be to have your local account manager Cisco connect with a discussion of NDA with one of the local SME or a person of BU endpoint.

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• How to set the properties of the EOS in the IVI driver

  I am coding a compatible driver IVI (in LabWindows/CVI) for an old GPIB instrument that does not support the EOI. To read the response device, I need to define the character of the EOS and terminate read on EOS. MAX I can correctly set the properties of communication and communicate with the device, but I do not know how to set these values in my driver. I tried if various attributes (for example with viSetAttribute (io, VI_ATTR_TERMCHAR_EN, VI_TRUE)), but still get errors (I guess I should use the incorrect session handles). How to set these properties inside the device IVI driver properly? These parameters must be active for this specific device only - all other devices on the bus use EDI. So I think that I can not just in the world, set this property on the map.

  Any help is appreciated. Thanks in advance,

  Martin

  To change VISA attributes as parameters EOS via the pilot of the IVI, your application must first acquire the handle valid VISA (VISA session) or the IVisaSession interface. The first is applied when the uses of pilot IVI VISA - C API and the latest is applied to when the IVI driver uses VISA COM API. Session handle of the IVI - C (that was returned by the function _init() ) is * NO * a VISA manage so you cannot call the API C VISA with the session handle.

  I don't know if the IVI driver you are using has such a property or attribute allowing to access the handle VISA or IVisaSession interface, but for example, driver Agilent IVI COM "IO" property, which returns the reference to IVisaSession or any good VISA com interface.

  Makoto

• How to disable the auto launch in canon EOS utility on my mac?

  Can someone let me know if you can disable this automatic launch. I'd like to use capture one, utliity eos on my computer as a backup plan. With the eos utility auto launches it will not capture to mount the camera. I tested it on my tour where I have the utility and capture works perfectly. So I think this is the device of auto-launch or it could just be that eos is installed and which has precedence.

  I use the eos utility 2 - 2.14.20.2 with a mark II

  My os is Yosemite 10.10.5

  Thanks in advance for any help

  See you soon,.

  Brad

  In the Canon utilities in the Applications folder, there will be an EOS Utility folder. In this case would be an EOS Utility application and EOS Utility 3 folder. If you run the application it gives you the icon on the menu bar.

  

  

• the eos 7 d is a full frame?

  The eos 7 d is a full frame?

  No, it's a device to sensor 1.6 crop.

• Can I wireless use a 430 EX II as a slave with the flash integrated the T3i EOS?

  I have a Rebel EOS T3i.  According to its manual, pp 191 ff, I can launch a remote speedlite wireless from the camera.  I get an error message cannot find the speedlite even if I set up my 430 EX II speedlite according to its instructions manual, pp25 ff.  Thanks for your help

  Yes - the 430EX II will function as a slave and the T3i (but not the T2i or earlier) can trigger remotely the speedlite.

  It of a little complicated and can be confusing.

  First... set the 430EX II in the correct mode.  Press and HOLD the 'Zoom' button for 2 seconds approximately.  This active a menu that allows you to put the flash is in a mode single-fash vs remote "slave".  Semicircular keys to switch to read 'slave '.  Press 'set' (in the middle of these buttons of a semicircle shape.)  I happen to have my 430EX II practical, but it must default to the slave 'A' channel '1 '.

  Now for the camera.

  On your camera menu, tab to the left (which we'll call 'Caméra Red #1' to distinguish it from other tabs) has 'Flash' control as the last option on this screen.  Either way for cameras with a built-in popup flash, the menu is marked 'Flash Control'.  For devices that do NOT have the built-in pop-up flash, this menu is called "Flash speedlite external control.

  In this submenu (Flash control), make sure "Flash of fire" (the top option) is set to 'Enable' or 'CustWireless' - should NOT be set to 'disable' or nothing will work.

  You will see a menu choice for "external Flash func. parameter' (and also 'External flash C.Fn setting'.)  IGNORE THESE!  This is for the hot flashes that are in the camera hotshoe and do NOT control the remote flashes wireless.  This is probably where you were getting confused.

  Then go to "built-in flash func. the parameters' where, paradoxically, you get to control how your device communicates with your flash REMOTE (Yes, I know that this is not the most intuitive place to put it.)  It turns out that it is your INTERNAL flash that is responsible for communicating with any flash slave remote.  The optical wireless actually uses visible light (many people assume that it is a communication infrared - me is understood - at the end of the day, I learned that was incorrect and it's actually the visible light of the flash itself.)  He quickly sends communication to remote control by pulse codes to tell flash what to do remotely.  All this happens until the image is exposed and you'd swear the only blinked once eyes flash... but it turns out that it is actually very busy away from the impulse to connect).

  In the "func flash built-in. menu of settings"there are a number of things that you must set.

  If you set the flash mode built in 'EasyWireless' it will be gray on many other parameters... basically the camera automatically decides what he wants to do.  I think that the only definition not gray is the channel number (which must match the channel number on your flash.  Channel numbers helps you can draw on events where other photographers are also using wireless flash and have no conflicts where they are triggering your flashes and vice versa.

  If you set the flash mode built in "CustWireless" it allows you to set other options.  CustWireless offers the most control.  In the end, it's probably mode you will use the most, once you get used to distance Speedlites.

  In CustWireless, the menu option 'Wireless' Func mode. becomes available.  This option allows you to decide if you want (I take these out of use for simplicity to explain):

  (a) speedlites both internal and external to the fire as a single group (icon external flash, a PLUS sign (+) and the camera icon)

  (b) the Speedlite flashes inside and outside to the fire, but allowing you to control the power RATIO (icon external flash, a COLON symbol ( and the camera icon means "ratios" can be customized.))

  (c) only external Speedlites (only the external flash icon is on this option - no icon on the device).

  I want to mention something about this external option only because it confuses most people initially.  The device communicates with the slave through the on-camera flash.  The flash on the camera quickly pulses to send the instructions for flashes to distance.  This means that to use the slave flashes, the on-camera flash must be addressed (in jumps - upward position).  If you ask for external flash only (without camera) the flash on the camera flashed only instructions BEFORE the opening of the shutter of the camera to take the exhibition.  When I started to learn from external Speedlite flashes, I saw the light on-camera flash and thought that my settings were ignored.  Do not worry... When you archive your images, you will see that there is no light provided by the on-camera flash during exposure... all this flashing comes before the opening of the shutter.   Everything happens so fast that you'd swear all the flashes triggered only once... but in reality they are actually much of 'talk' before taking the picture, but this happens at an incredible speed.

  And one last comment... because the camera communicates through Optics (visible light) flash to talk to remote controls, it is important from the bottom of the body of your 430EX II can 'see' the flash on the camera.  In small parts, that no matter where the lower part of the body showed up... you notice the impulses of the light of the on-camera flash.  But in large halls or outside the lower body of your 430EX II (where the receiver is located) will have any reflection of the walls, etc.  In this case, simply turn the lower part of the body of the 430EX II so that it faces the on-camera flash.  You can then rotate the head of the 430EX II at the point where you need.  The 430EX II will trigger even in daylight, as long as it can 'see' as the on-camera flash.

  Here is a video that can help you: http://www.youtube.com/watch?v=pQIyPWGPp5A

• Printing from Canon's EOS from the SD card

  OK, so I'm wondering if I need a Canon printer to print images from a Canon EOS camera using the Sd Card directly from the camera to the printer. Yes, I will be shooting in RAW.

  If you have a PictBridge compatible camera and printer, this will work. Should not be a Canon PictBridge printer.

  

• I have an EOS 7 d, I need to be able to take pictures of the inside of homes. I am a real estate agent. So to get a p

  I have an EOS 7 d, I need to be able to take pictures of the inside of homes. I am a real estate agent. It is difficult to obtain an image of a small bedroom or bathroom.  What lens wide angle do you suggest. The price is a concern, I don't want to spend more than $500 I am an amateur photographer, I do everything on Auto.

  Thank you

• The ML - 3 ring flash and the speedlite 300tl is usable on the EOS 7 d?

  I have good light for canon ml-3 and a speedlite 300tl that I use on my canon t90. I'll buy a Canon EOS 7 d DSLR. Can I use the ML-3 and the 300TL on the EOS 7 d?

  I want to thank each of you for the quick response. It's very appreciated.

• failures after you download the update of the EOS 5 computers xp...

  pretty much says it sll.

  I have 2 desktop computer and top of map 2 and 4 neighbors 4, that after loading the UPDATE of EOS seems to hang in very slow motion
  and no longe do work at an acceptable level on the step 2 days that I tried to help everyone, nothing is done as if I get the Task Manager started immediately I can see process shows 99% idle, yet seems to be suspended.  I discovered this by starting a laptop, I have not used for some time, he started very well and lasted a few hours ok, until I have ok download and installation of the upgrade of the EOS.  It is now in the same compartment as the others...

  I don't appreciate a poison pill and wonder how legal this is...
  I have a 95 computer running well... no support, but it seems is to not care not and keeps on ticking.
  (it follows a door access log)

  Thank you Microsoft... 8 -)
  Needless to say that I am very unhappy...

  pretty much says it sll.

  I have 2 desktop computer and top of map 2 and 4 neighbors 4, that after loading the UPDATE of EOS seems to hang in very slow motion
  and no longe do work at an acceptable level on the step 2 days that I tried to help everyone, nothing is done as if I get the Task Manager started immediately I can see process shows 99% idle, yet seems to be suspended.  I discovered this by starting a laptop, I have not used for some time, he started very well and lasted a few hours ok, until I have ok download and installation of the upgrade of the EOS.  It is now in the same compartment as the others...

  I don't appreciate a poison pill and wonder how legal this is...
  I have a 95 computer running well... no support, but it seems is to not care not and keeps on ticking.
  (it follows a door access log)

  Thank you Microsoft... 8 -)
  Needless to say that I am very unhappy...

  You update Microsoft Security Essentials. If you have done it is probably where the problem is. Click on the link and read the article.

  http://News.Softpedia.com/news/Microsoft-Security-Essentials-update-makes-Windows-XP-unusable-438170.shtml

• On the EOS 7 d Mark II is the supposed main dial to enlarge the image of reading?

  I want to check the sharpness that I pull on my EOS 7 d Mark ii. I know how to read the image. I can't click on the index/reduce/enlarge button to zoom. But I've also read where the main dial to zoom in even closer. Am I wrong? If so, my camera won't do. When I turn the main dial in play mode, it only contributes to the following image. Help please!

  On the 7Dd2, you press on the magnifying glass to zoom in, and then use the wheel near the shutter button to zoom more.

• Looking better all the objective for an EOS 20 d lenses

  Hello world.  I've had my EOS 20 d for over 10 years now.  I've never been satisfied with the 18-55mm EFS lens it comes with.  Just don't have enough zoom or wide angle.  I don't do anything professional.  Simply take a lot of family and outdoor / nature shots.  I would like to be able to take pictures of quality portrait and a picture of the grand canyon and turn out great.  I would like to be able to take just a lens with me on vacation.

  I was look at the EF-S 18-200mm f/3.5-5.6 IS lens.  He seems to have everything.  Will there be any multi-purpose lens that I should look?

  Thank you

  Dallas

  "The STM 55-250 will be able to take pictures of nice wide angle too?

  It depends on your definition of wide angle. I think most would say no.  If you start thinking about "AOV" perspective, it will be easier to say.

  A 55mm lens on your 20 d has an AOV of 28 degrees (approximately).  It's not very wide?  Your 18mm lens has an AOV of 84 degrees.

  The specification AOV is easy to find because it is not in all the specifications of lenses. BTW, 250mm is about 6 degrees.

  Canon is supposed to be coming out with a Canon EF-S 18-300mm f/3.5-5.6 lens of STM IS.  I don't know if it's on sale again then you might want to check.  AOV will be 84 to 5 degrees (approximately) wide enough of Nice TV, is it not?  The more AOV is the largest angle.  The smaller the number, the TV is.

• The EFM 22 mm f/2 lens STM will work with my Canon eos Rebel t5?

  I'm looking at the lens Canon EFM 22 mm f/2 STM and I wonder if it will work for my Canon eos Rebel t5. I need to know as soon as possible. I searched other places online and cannot find something that answers my question. If anyone knows and could tell me I would really appreciate it.
  Thank you!

  EF lenses - M fit not rebel or any Canon DSLRS. They are for the M series cameras.