EPM 11.1.2.3.500 - queries Smart Smart View Provisioning

Similar Questions

• When you perform queries Smart View Ad hoc, changing the selection of the Alias in the Essbase himself Ribbon

  Hyperion Planning

  GPE, Fusion edition, 11.1.2.2

  Smart View 11.1.2.2

  When running Smart View Ad-hoc queries, selection of the Alias in the Essbase Ribbon does not.

  When I start a new query, the Alias in the Ribbon of Smart View is always set to None; but often, not always, the selection will change itself no default - usually after I refreshred/zoom a few times.  He starts a time past, I change the selection of the Alias in the Ribbon in none, but it changes just itself by default again.

  The option to display the name of the Member is defined on behalf of members only.  (This is the default setting for this option and I usually begin with all the options, by default).

  This problem started after that we went to 11.1.2.2.

  If neither know why the Alias / None change automatically in the Essbase Ribbon?

  Thank you

  Veronica

  There is a way that you can set for your connection

  When you use shared connections to connect to your application, you do a right click and say "Add to private connections". Once you have added to your private connection, right click and click 'Set Alias Table'. You can do this on a connection that you have added to private connections

  Concerning

  Amarnath

• Issue of Smart View?

  Hello

  Our users report recently that Excel freezes when trying to copy and paste the value of the cell with enable Smart View, the steps they do are the following:

  Open the model smart display of Excel and then click on Control Panel, sharing connection, and then connect to essbase base, ad-hoc analysis.

  then control - C any cell in this model, Excel becomes frozen, they close Excel and restart.

  If Smart view does not activate, then Ctrl C and P control works well.

  Have someone in the Group has a similar question, I hate to blame Smart view for this. We have 11.1.2.5.500 the Smart view, Essbase version is 11.1.2.4

  Thank you

  Is the issue with this model/file?  What happens if the user is using a white sheet excel and did the same steps?

  If its this sheet only, check the display options smart for anything that seems unusual. You can also clear the metadata in the workbook, it could clear up what ever is causing the problem.  to do this, open the template, click Smart View-> Info-> Delete Sheet-> remove all metadata

  given that your username is reconnecting the plug anyway, it does not cause other problems.

• What does #Invalid in Smart View

  Some users get a result of #invalid in their Smart View queries. It seems to only show when there is no data (i.e. #missing), and we are curious to know why it displays not only as #missing. What are the parameters cause Smart View to classify something as missing vs invalid? We noticed a thing, it was that a query that displays #missing in some cells, turned to #invalid when an attribute is added to the query. My thought is that the result of #invalid means roughly "sorry, cannot calculate your attribute if there is no data, if your application is not valid. Is anyone know for sure?
  
  Sabrina

  straight out of the Smartview user guide
  #Invalid/nonsense: where the data in the intersection is not valid for metadata valid combinations.

  Search variable attributes in the smartview guide http://download.oracle.com/docs/cd/E12825_01/epm.111/sv_user_help/frameset.htm?launch.htm
  You can search various attributes and select the views of data. It gives you an example where it is used (they use #meaningless instead of #invalid in the example)

  Published by: GlennS_2 on December 9, 2009 10:59

  In my previous post, I used the term slowly changing attributes. They use various attributes in the documentation. They mean the same thing.

• Submit the data Smart View

  Hello

  We cube essbase with Smart View 11.1.2.5.500, users put in place their card smart view presentation technique that extract data from their financial model, my question is that

  When users are ready to send data and connect to essbase, forecast data in the spreadsheet disappear, replace data into Essbase (is there nothing in essbase yet obvious), is any way to avoid this?

  I can add leaf with connection to essbase, then copy the value and submit, it works. But of course, it is not very effective.

  I don't miss something in the smart display setting?

  Thank you

  Dan is correct.  It is expected when connecting to Essbase of Smartview behavior.  The work around what he suggests is also one I have my team to use.  It has additional benefits.  You can do your work on a single sheet and then copy - paste special values only to the Essbase submission page.  In this way, you can use the formula to create your presentation, but not the formula on your shipment page.  Then, you can create a page of validation to make sure that the data matches between the two.

• Error recovery Smart View

  Hello

  We have essbase 11.1.2.4. And financial users connect to the cube by Smart View (11.1.2.5.500), they generally put tabs in place in a worksheet to recover the cost for each tab Center, but he gets the following error:

  Unable to connect to provide. The connection to the server failed. Make sure that the server is running in the specified URL

  But APS and essbase works well.

  Any advice on this

  Thank you

  you could do with a macro and HypConnect

  Details of smartview Developers Guide here:

  HypConnect (vtUserName, vtPassword, vtSheetName, vtFriendlyName)

  Parameters

  vtSheetName: the name of worksheet on which to run the service. If vtSheetName is Null or

  Empty, the active worksheet is used.

  vtUserName: valid username

  vtPassword: the password for this user

  vtFriendlyName: the friendly name of the provider of data connection. It's the connection

  name created by HypCreateConnection.

• Smart View removes non-members of the model after Ad - Hoc analysis

  Hi all

  I have a spreadsheet that I recovered using Smart View 11.1.1.3 against Essbase 11.1.1.3.

  When I update this spreadsheet against using Smart View 11.1.2.5.215 11.1.2.3.500 Essbase spreadsheet seems to be remove the cells whose content is not a member in the database.

  
  

  Rest of the worksheet correctly refreshes and I receive the correct data in the worksheet by using the last smart view, but I need to have the content which is withdrawn.

  
  

  Anyone has any idea what is causing this question to ask?

  
  

  
  

  Thank you

  This has been resolved by an Oracle Doc ID 1571254.1

• Smart View for Essbase unavailable in rapid deployment planning

  I managed to deploy EMP 11.1.2.3 by following the steps in the deployment planning guide (http://docs.oracle.com/cd/E40248_01/epm.1112/epm_planning_rapid_deploy/epm_planning_rapid_deploy.html). However, when I do the Smart View by using a URL of shared connections to http://< servername >: 9000/area of work/SmartViewProviders, I only get the connections for the planning and of the declaration and framework. How an I get a connection for Essbase?

  It turns out that 11.1.2.3 rapid deployment planning wizard does not install Essbase service provider, just planning service provider and Reporting and analysis of service provider. Until that I installed Essbase service provider, I wasn't yet able to create a private to Essbase connection. I had to run InstallTool.cmd and select "Provider of Services Web Application" in the Essbase selection screen section. I also had to run the configuration utility and select "Deploy to the application server" under "Service provider" in the Essbase selection screen section.

  After that, I was able to create a connection in Essbase with this URL: http://: 9000/aps/APS

  Even though the private connection was working now, the Essbase connection was still does not like a shared connection in Excel, when I put the Excel Smart View option for shared connections URL http://: 9000/area of work/SmartViewProviders. I could get this job to rerun the configuration utility and selecting "Configure the Web server" in the section "Hyperion Foundation" of the selection screen.

  I was also able to create an XML file as Celvin suggested using http://: 9000/aps/APS for connecting to Essbase. Thanks for the suggestion!

  -Tom

• Smart View "cells Sales.

  Hello
  
  Is anyone who is familiar with the 'Sales cells' Smart View and how to work with them to maintain updated excel in shape?
  
  Thank you!

  Hope the helps the information below:

  http://docs.Oracle.com/CD/E12032_01/doc/EPM.921/html_hsv_user/frameset.htm?/CD/E12032_01/doc/EPM.921/html_hsv_user/hsv_help-06-24.htm

• Ask Timedout error when sending data from planning thorugh Smart view

  Hello
  
  We receive Request Timed out error when trying to send data to the planning application by using Smart view.
  
  "Unable to connect to the provider because: the request has timed out." Contact your administrator to increase netRetryCount and netRetryInterval. "Is someone can you please tell me where I can increase the time-out settings? Can someone give me the link to the document that detailed the steps to do this.

  Go to the knowledge base and search for document ID 744559.1

  Cause
  By design, Internet Explorer imposes a time-out for the server limit return data. Internet Explorer does not indefinitely wait for the server to come back with data when the server has a problem.

  Smart View communicates via HTTP to which Internet Explorer DLLs are used. Smart Display users who run large queries or have a slow network connection might encounter the error, "the request has timed out. Contact the administrator to increase NetRetryCount and NetRetryInterval. »

  This error message may be misleading because this error also occurs if Internet timeout settings Explorer does not respond to large farms. By default, Internet Explorer has a value of KeepAliveTimeout to a minute and another factor limiting (ServerInfoTimeout) of two minutes.

  Solution
  Please see the following two Microsoft articles for more information:

  http://support.Microsoft.com/kb/813827
  http://support.Microsoft.com/kb/181050

  The following steps must be made with the help of your systems management group. It is recommended that a backup of the registry is performed before making any changes.

  On the client computer, add/update the following registry keys:

  1. open the registry, Start-> Run-> Regedit.

  2. Locate the following section:

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings].

  3. create the new DWORD key with decimal values:

  ReceiveTimeout = 480000

  KeepAliveTimeout = 180000

  ServerInfoTimeout = 180000

  In this example, the ReceiveTimeout setting is 8 minutes. KeepAliveTimeout and ServerInfoTimeout settings are 3 minutes. These values are set to demand longer running more.

  4 restart the machine for the new settings to take effect.

• Get Smart View to connect to the planning

  Version is 11.1.2.
  
  I've installed Smart view using tools-> installation-> Smartview to workspace. After which opened Excel, click sharing of connections and changed the url to the < servername > correct: 19000/area of work/SmartViewProviders.
  
  After that, I am prompted to log in with my user id and password. Apparently I can connect without any problems.
  
  My question is what now? My shared and private connections pane has a menu drop-down with 'select the server to go ahead', but nothing is listed. My open-> active connections is empty. Nothing happens when updating. AND:
  
  http:// < servername >: 13080/APS/SmartView gives me a 404 error. I checked to see if Analytic Provider Services ran who it was. I restarted the service anyway, still the same issue.
  
  Also there is a difference between installing Smart View of workspace vs download and delivery facility?
  Any guidance appreciated.
  
  Published by: EssbaseApprentice on January 26, 2011 12:59

  Connect you with the correct url, smartview is no download is different from the workspace or delivery.
  This may help:-http://essbaselabs.blogspot.com/2010/04/smart-view-1112-connections.html
  You can also connect to planning with the help of a private connection - http://download.oracle.com/docs/cd/E17236_01/epm.1112/sv_user/conn_add.htm

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Need to Smart View 11.1.2 Hyperion download link User Guide

  Hi all
  
  I could not find the download link for Hyperion, Smart View Version 11.1.2 User Guide, can someone let me know the download link.

  http://download.Oracle.com/docs/CD/E17236_01/EPM.1112/sv_user.PDF

  HTH-
  Jasmine.

• Smart View 1935 Setup error

  Did someone got an error 1935 when installing smart views? My helpdesk told me I need a registry exception, but I have to tell them what it is and where to put.

  Re-install Smartview customer when logged in as a user with full Local administrator rights to the computer being installed.  Your user rights are insufficient to perform the installation

• Smart View Add - In in Excel 2013 disappers

  Hello

  Smart View add-in disappears whenever I run a special on a range of new or existing and close the Excel file. When I re - open this file Excel same or new, Smart View missing once again, so I go to Option > Add-Ins > and this is under the Application Inactive Add-Ins. To activate it, I'm going to manage the COM add-ins and check the Oracle Smart View for office option. It works, but I have to do it EVERY time that I re - open the excel file.

  Any suggestions or ideas?

  Thank you

  quick, followed to my previous note, with a slight variation on the solution of JM, I've been able to resolve these two issues of users on a system of users that the key was not in HKEY_Local_Machine but in HKEY_CURRENT_USER.

  so, to quote with slight modification...

  Open regedit and locate the entry

  HKEY_CURRENT_USER\Software\Microsoft\Office\Excel\Addins\Hyperion.CommonAddin\

  and make sure that the LoadBehavior key is set to 3.

  My guess is that the difference was caused by the way in which it has been installed and the local user rights.

• Smart View for MS Word

  In MS Word I pull data from smart view (using the values get functions) data was appeared correctly but it does not display in thousands here I attached the file and marked in the red circle... How can I set the thousands...

  You change the formatting:

  right click on the value, and then selecting Toggle field codes

  It should be in a format something like that {= HsGetvalue ("", "#POV SIZE") |} SmartView12343242342 | {General |}

  in this code, "Général" is the applied formatting, change it to your desired format by the thousands formatting {= HsGetvalue ("", "#POV SIZE") |} SmartView12343242342 | 0, 0. {00 |} for example will give you thousands, commas, with 2 decimal places.

  hope this helps, let me know if you get stuck.

  Edit:

  Once you modify the code, right click again, disable the field code and update smart display to view the results.

  Edit2:

  If you don't want the separation by commas or decimal places 0, just use

  If you want the comma and no use decimal 0.0,

  If you don't want any comma decimal use 0,.00

  It's the same syntax of formatting that Excel uses.