EPMA workspace shows no Application Wizard project management

Similar Questions

• Problems with the ColdFusion Extensions and CF/Flex Application Wizard

  I configured the Eclipse RDS according to the instructions in the help documentation. The RDS Fileview and Dataview work OK, but I did have luck with the browser Services: when I try to increase (+) the element localhost, the only thing that appears is the message "Unable to get the metadata for CFCs."
  
  The components Panel in Dreamweaver 8, which has exactly the same information, works very well.
  
  Perhaps related to the above: when I create a Flex with the CF/Flex Application Wizard project and examine project properties, in the Flex Server section, I get "because this project does not use a server, these settings do not apply. I find it strange: a ColdFusion project that does not use a server? In any case, the wizard, I not was able to create a simple project that works.
  
  If anyone has had similar problems and was able to solve them, I would be grateful little light on the subject.
  
  Carlos
  

  Well, I could solve this problem by CF UN-installing and reinstalling.

  I did some more tests (UN/reinstall once again) and it seems that this problem occurs when CF is installed in devnet version mode and not if in developer mode.

  To check if CF is installed in devnet mode look in the administrator of the CF under "server settings-> analytical settings-> version information", you will see a notation for devnet.

  I also did a little poking around and it happens whenever you install CF using a certain range license keys. The keys of this range are valid keys for installation, but they alter some critical parameters in CF (watermark paper/pdf flash and apparently some RDS stuff), the solution is to install with a key dev-net or in developer mode.

• Topic shows in the project manager, but not in Windows Explorer

  Hello

  I have an A project topic that I would like to import into the project B. When I work in project B and click import and watch the list of topics in project A, I don't see the topic I need. However, if I open A project, I can see in the project manager. The section opens and appears in the table of contents correctly.

  I don't know what is happening or how to fix this. I am reluctant to experiment because I myself got subject struggling outside the project before moving.

  Thank you

  MDawn

  I thought to it after I posted my question. I opened the Properties section and the name of the file is different than the title of the topic. Of course, in Windows Explorer, I saw the file name, not the name of the topic.

  Thank you

  MDawn

• Error ERR-7621 couldn't determine workspace to accept application (:) on request.

  I have a request to the page-1 (over the login page) in the APEX 4.1.0.00.32 on Oracle 11.2.  It uses the 17 theme and I also tried 22 theme that gives the same error message when I try to import the file that I just exported.  There is a region in connection with a query of vanilla.

  In the import interface, I choose the file to import, click Next, and then he shows me a page"cannot display the Web page ' with 'http://mydomain:7777 / pls/apex/www_flow.accept" in the URL. "  When if I refresh the page, I see:

  Error ERR-7621 couldn't determine workspace to accept application (:) on request.

  Any pending cookie P-company or www_flow_company to contain the id of the owner of the application security group.

  I don't know that it's the first import I've tried since we went from 11.1.  I'm able to import the same file in apex.oracle.com.

  {More info: Server / server name has changed which is most probably the cause of the upgrade of the Oracle.}

  It has been suggested here {message identifier: = 10308292} by using the 9 theme can be a problem.   ???

  Our people here say that running SQL export file is a workaround.  I'll have to try it.

  Howard

  Turns out that we have had this problem before.  I think it's a path problem.  "cookies" is not found.

  I am excerping from the email saying that our people made for a Windows Server DBA:

  The dads.conf in question file resides on the server to C:\oracle\product\XXX\Webtier_11.1\instances\instance1\config\OHS\ohs1\mod_p lsql XXXXXXX

  The configuration setting ' PlsqlDocumentTablename wwv_flow_file_objects$ ' should be sought to http://httpd.apache.org/docs/2.2/ for see what he does, and if necessary, will have to be inserted into the file dads.conf as the last parameter between brackets as shown below. [It seems that it was and that's what they did.-H]

  SetHandler pls_handler

  Order deny, allow

  Allow all the

  AllowOverride None

  PlsqlDatabaseUsername APEX_PUBLIC_USER

  PlsqlDatabasePassword

  PlsqlCGIEnvironmentList SSL_CLIENT_S_DN_CN

  PlsqlDatabaseConnectString abcdef099vm:1521:DEV99 ServiceNameFormat

  PlsqlAuthenticationMode Basic

  PlsqlDocumentProcedure wwv_flow_file_mgr.process_download

  Docs PlsqlDocumentPath

  PlsqlNLSLanguage AMERICAN_AMERICA. AL32UTF8

  PlsqlRequestValidationFunction wwv_flow_epg_include_modules.authorize

  PlsqlDocumentTablename wwv_flow_file_objects$

  Before making the change, make sure that everyone is off apex, save the changes, then bounce Web server by going to Services, look for Oracle Process Manager, then switch to bounce.

  Howard

• Need to best Microsoft Project management tool

  Hello

  Please guide if Microsoft Project Professional 2016 have the following characteristics:

  1. define the meeting calendar
  2. define the project (Star Date, end Date, customer information, etc.)
  3 create resources
  4. create the WBS (task with attributes such as start date, date end, dependencies, resource, real, late start date, % completion etc..)
  5 assign resources
  6. Enter the actual data
  7. maintain the level of reference
  8. apply a level resources
  9. set on resources
  10. generate various view (Gantt chart, showing resources etc.)
  11 generate reports
  12. agile project management

  13 can be consulted online

  Please help me to get the trial version of the same.

  Concerning

  Gaurav Suryan

  Hello

  Your question is beyond the scope of this community.

  Please repost your question in the Forums of TechNet project.

  https://social.technet.Microsoft.com/forums/ProjectServer/en-us/home?category=project

  See you soon.

• IDE DVD drive is not showing in BIOS, but projection in computer

  Hello

  I recently installed a new motherboard (Asus P5LD2 REV 2.01). ALMOST everything works fine - Windows 7 is installed and giving great performances. However, the IDE DVD drive does not work very well. It is connected to the primary EIDE channel on the motherboard and will NOT show in the main screen of the BIOS. However, it will show in the BIOS priority boot device, analysis of FDI and the F8 boot Menu. It also shows in COMPUTER and disk management. The IDE DVD Player loads and plays the discs very well! The main problem with it shows is not in the BIOS is this: after the computer, the computer has been turned off for a certain period of time, when I try to turn it on it restarts several times until the "Starting Windows" stage lights. The only way to solve this problem is by entering and leaving the BIOS, or entering the F8 boot menu and selecting HARD - which always does not restart. In addition, when the computer is turned off for a long period of time, sometimes I have no display or beep MESSAGE until I have turn works a few times, or press the reset button. The hard drive shows in the BIOS and is connected to the PRI_IDE (blue) port. I tried two CD-ROM drives, to replace the DVD IDE drive, and they're just right in the computer do not give any display or beep POST. The hard drive light continues flashing in the same schema, when an IDE CD drive is connected. Without a connected optical drive, nothing works. Y at - there no fix for the problem with the DVD IDE drive not no projection in the main screen of BIOS with random restart problem? Event Viewer displays an error of power core for every time that happened.

  Thank you very much!

  Brandon.

  My computer specs:

  Motherboard - Asus P5LD2 Rev 2.01.
  -Intel Core 2 Duo 1.86 GHZ Socket 775
  -4 GB DDR2 RAM
  -Microsoft Windows 7 Home Premium 64-Bit
  -Maxtor 6Y080L0 80 GB IDE Hard Drive
  -LG Super Multi IDE DVD Writer Drive GH22NP20 (not recognized by the BIOS, as mentioned above).
  -ATI FireGL Graphics card VGA 128 MB
  -POWER SUPPLY 350W

  Hi Brandon,.

  Certainly, this seems to be a problem with the hardware. Contact the manufacturer of your computer or a local technician for assistance on this issue.

  Feel free to respond if you need help with Windows in the future, we will be happy to help you.

• Copy the first Pro CC via the project manager

  Hello everyone"

  Because I am not able to get automatic registration to work.

  Are there problems with the help of project manager to copy the project to the CC folder?

  I would like to change my iMac and MBP my laptop when I'm on the road.

  In addition,

  Are there problems with the copy of the project of an iMac of Monitor 2 to a laptop monitor 1?

  Thanks a bunch,

  Bob

  Whichever one you want all workspaces by default are set to single monitors, so editing it is the norm, but I have 2 monitors at work, so I have a custom workspace, and then if I go home to my iMac with no external monitor I just spent on my custom workspace single monitor. So if you like what you have set up on your dual screen system and you did not save it, you should do that if you can get it at the time when you're not on the road.

• Project Manager do not copy a project correctly with multiple files of span

  "Houston, we have a problem."  OK, I think it's a serious bug in the Project Manager / Mountain Lion copy function.

  This is my first complete Assembly with PP, and unfortunately I did not advance file management.  This is so what I put up to do all my editing (which worked great).

  3 camera files - all AVCHD (PRIVATE) on my external drive 1.

  Created a project in PP file and saved to my local dive.

  Imported files, 6 camera with Media Browser [(milieu, gauche et droite) - acts 1 and 2].

  Import named these files vidoe XXXXX. MTS, so I renamed the Act1, 2 Center, Act1 right and so forth.

  Created a chronology of MASTER and then synchronize the video and then created a scene of the MASTER schedule.  Again, EVERYTHING GOES WELL.

  Now that the project is done, I want to use the function of project manager COPY 'Archive' my project so I chose to save to an EXTERNAL DRIVE 2.

  Here is the BUG.  If I open the project file on external Drive 2, not all my clips are emerging.  In fact, if I select one of the VIDEO CLIPS, such as CENTRE ACT 1 and make a find in the FINDER it shows:

  

  

  where, as in the original project on my local drive CENTRE ACT 1 appears as: (note that there are several split files as it should)

  

  

  Note that in the COPIED file element he copied an AVCHD only (and I don't know what does it file is appropriately for 6 of them).

  Thoughts?

  Anyone know where this should be reported as a bug?

• Does anyone use the project manager?

  Hello

  I have printing that Manager project does not serve much. I use CS4.

  However, here is my attempt.

  I worked on a project for a friend, and as I was going out of town, he wanted to do a little

  editing on the project with his computer.  It also has the CS4.

  So, I used the project manager and made the following choices:

  1. I clicked on: "Collect files and copy them to the new location."

  2. I clicked on and chosen: "exclude the unused Clips.

  3. I clicked and selected: "Include preview files, 'Include audio conform files' and 'Multimedia files Remane to match clip names'."

  4. I made the destination of my office project.  He showed the 51 concert in the project.  Then I transferred all of my office to help connect an external hard drive with an eSADA.

  When my friend all this on drugs on his hard drive and opened his Pro CS4 the Prem, the project looked just like he did on my computer, with the exception: all the video clips were 'offline' of course, they were originally on one of my hard drives, but not "hard drive project.

  I expected the project manager to copy the files from all three of my drives with everything else.  In addition, some of the music was absent (offline).

  I expect too much from the project manager?  It will copy all files, audio, video, F / x all hard drives etc?

  I'd appreciate help here how to use the project manager and get everything.

  Thank you, Tom

  They are in offline mode because they aren't in the same place they were before - your office.

  Your friend will have to connect the media.

• See the topic names (vs leader) in RH7 project manager?

  I swear the list of HTML files in my project manager showed the names instead of file names entry until I redid all my pod setting yesterday...? It now lists the names of files. Is there a way to change this view? Not having any luck finding this info in the help file on RH7.
  
  Thank you!
  KC

  Wow Rick, which was fast! Here are the instructions (found in aid after that I posted this) for anyone else who runs into it:

  Viiew topics by filename:

  1. click on the folder of files in project [said HTML files in my PM] in the project management module.

  2. Select discover > by file name.

  KC

• Smart folders do not show sent ymail and project files.

  I have subscribed to all folders YMAIL and all smart folders to select the appropriate imap folder. Most of the names do not match the names listed when I connect directly, but some work anyway (watch in TBird but shipments it is unwanted online and it works). The sent folder YMAIL doesn't show anywhere, YMAIL folder project displayed YMAIL instead of the unified drafts folder. GMAIL and Outlook work very well.
  Reminder: YMAIL shows under Inbox, junk mail and Trash but not covered by air currents and sent.
  Any suggestions?

  Thanks Matt.
  No fine Crusaders. I deleted the physical file using Windows Explorer. I searched and he did it before I did anything else. Then I tried a lot of things myself. Then I posted my request for help.

  I'm reasonably sure there is something wrong with the way that Thunderbird creates the MSF smart folder or IMAP.yahoo MSF file. He also had something to do with my account settings. I got it all working by changing to keep everything on my PC to keep it on the servers.

  IN CASE YOU ARE WORRIED, I ATTACHED A PICTURE OF MY SETTINGS THAT WORK AND HAVE A LITTLE RECAP OF ALL THAT BELOW.

  Problem:
  1. sent YMAIL of folder appears in the view 'All' but does not anywhere in the "smart folder. BUT even if it is not anywhere, e-mails that appear when I click on the unified "Sent" folder
  2 project YMAIL folder appears in the mode "All", but "Smart Folder" mode it sometimes shows under YMAIL, and sometimes in the smart folder.

  Unique configuration:
  1. I have two profiles and choose which use when I start T-Bird.
  2. or the profile is in the standard location. Profile with all the 3 services is located on a memory stick, so I can use it on any PC.

  Account settings: all three (GMAIL, Outlook and YMAIL) are set to the same thing.
  1 server: check to send to startup & all 60 minutes. Move deleted messages to the trash on YMAIL & GMAIL. Move to deleted in Outlook. All have empty the trash at the exit.
  2. the copies & folders: put a copy in sent premises. Keep the archives of message is not checked. Keep on local drafts drafts. Models of light up on models the.
  3 junk Settings: place new unwanted mailings on YMAIL, Spam on GMAIL, spam on Outlook and undesirable on local issues.
  4 synchronization: Kepp messages on this computer is not checked. Synchronize all messages regardless of age. Do not delete the messages.
  5. Advanced Synchronization: all records are unchecked in "choose for offline use."
  Junk is the only one where the T-Bird is set to put/keep e-mail on the server.

  Server properties: all records are verified to be included in global research.
  Folder subscription server status:
  1 YMAIL: Project, reception, sending mass mailings, Trash box
  2 GMAIL: Drafts, Inbox, sent Mail, Spam, Trash, all mail.
  3. Outlook: drafts, Inbox, sent, Junk, deleted.
  Online search is verified for all unified servers. And all of these answers are archived in the unified corresponding folder "choose" settings. Local folders are also checked.

  Attempted fixes:
  1 checked subscription & unified folder "choose folders". All have been verified.
  2 tried several sequense of checking and unchecking subscription and choose the folders. None worked.
  3 search help and used Windows Explorer to remove the smart folder. Restarted two times T-Bird. Sometimes it only part of his corrections on the first reboot. No change.
  4 backed up and deleted the YMAIL Sent.msf folder. T - Bird re-created before lower, but fixed no problem.
  5. save the entire profile and tried to edit the smart folder Sent.msf. No luck.
  6 restore full profile. Tried editing IMAP YMAIL Sent.msf. No luck.
  7 Retored profile and asked for help.
  8. kept trying and finally got all work to keep everything on the servers instead of my PC.

• Custom development of modules CompactRIO - Embedded window of "missing" project manager

  Hello!

  The scenario:

  I am currently working on a custom CompactRIO Module. The material is made for the most part, I installed CompactRIO MDK 1.0 and I want to configure my CompactRIO system and develop the driver VI for my module.

  The steps required to configure the cRIO system before you start developing the pilot VI is the following (as mentioned in the documentation of MDK):

  1. launch LabView and select as an execution target FPGA devices. The Embedded project manager window will appear.

  2. Select the file-> New and create a project (LEP) LabView Embedded file.

  3. ...

  Used equipment:

  -LabView 2011, a Student Edition license

  -LabView FPGA and real-time modules

  -NIRIO 4.0

  OR-CRIO9024 controller with 8-slot chassis

  The problem:

  After the launch of LabView and selecting FPGA as a target (see figure), even by pressing the "Go" button next to the slide in the menu window of Embedded project manager will not appear.

  I also tried searching in other menus, without success.

  Issues related to the:

  1. where can I find the Embedded project manager?

  2 is it possible, that I can't find the window of Embedded project manager because I have a student licensed LabView?

  3. How can I create a LEP file in this case?

  4. can I use (and if so, how?) the option "create a pilot instrument? (see the attached figure)

  Waiting for answers,

  Levi

  Hello!

  After some research, I managed to create the link between my custom cRIO module and LabView.

  The complete solution (with LabView 2011):

  -Add the line "cRIO_FavoriteBrand = generic ' in the file LabView.INI"

  -Launch LabView

  -creation of a vacuum of the project and select FPGA execution target, click OK

  -Select 'CompactRIO Reconfigurable Embedded System' as the project type, click Next

  -the next step is the detection of the chassis / modules, followed by the creation of the new FPGA project

  -Add the custom module: click right on the target FPGA-> New-> C Series-> new target Modules or peripheral-> series C Module-> OK

  -Enter the name, select 'generic' module type, enter the location

  Hope it helps someone someday.

  Levi

• CRM integrated with MS Project Management

  Hi Expert,

  On the CRM integrated with MS Project Management, there any company always do this?

  In fact, there are only certain configurations or it's really complicated customization?

  The result of the integration is really effective and efficient?

  Can share with me the practice of MS Project to the planning of resources management?

  Thank you!

  Hello

  The question you posted would be bettersuited in the TechNet Forums. I would recommend posting your query in the TechNetForums for more assistance:

  http://social.technet.Microsoft.com/forums/da-DK/projectserver2010general/threads

• Hide the Application in the management of the applications in the Blackberry

  I want to hide my Application in the management of Blackberry applications.

  Is this possible?

  How can I achieve this?

  I guess you mean that when the user goes to the Option of Application Management on the device, he or she will not see your app in the list?

  If so, then the answer is it is not possible to hide your app in the list.

• Apex 5 on PDB not work. works very well on the root - ERR-7620 could determine no workspace for the application (4500)

  Hi all

  I recently installed Oracle 12 c and Apex 5 on a new server.

  My apex 5 installation went well. I can access it without problem at the root on its default port 8080.

  Later, I created a new pdb file (cloned from pdborcl) and created a new schema.

  as sysdba, I started a new instance of the Apex on port 8888, but when I try to access it through the http://IPAddress:8888 / apex / or apex / http://IPAddress:8888 / apex_admin I get an error (see pictures below)

  Can someone tell me please in the right direction.

  Should I do an install fresh apex 5 on the PDB? I thought that if I installed as sysdba on the CBD, the pluggable DB would inherit apex 5. Help, please

  ERR-7620 could determine no workspace for the application (4500)

  ORA-01403: no data found

  
  

  (DOES NOT NOT ON PDB)

  

  
  

  (WORKING ON ROOT)

  
  

  
  

  
  

  Hi John,.

  What you said is exactly the problem you will encounter if patch 20618595 of the database is not applied before the APEX upgrade to 5.0. In addition to the opatch apply the approach, you also run $ORACLE_HOME/OPatch/datapatch? At run time, you guarantee that all-ins databases have been opened after the start of the database to the top by issuing alter database connectable to all open?

  Finally, you have indicated that you have installed it on a new server. Is your main interest just to have a new 12 c CBD with APEX 5.0 in it? If Yes, you can do the following to avoid the problem you are experiencing currently.

  (1) create a new 12 c CBD

  (2) connect SYS as SYSDBA to CBD$ ROOT and launch a 4.2.5 or newer version of apxremov_con.sql. If the database that you created in step 1 is 12.1.0.2, you can just use $ORACLE_HOME/apex/apxremov_con.sql

  (3) connect SYS as SYSDBA to CBD$ ROOT and run apexins.sql from the source 5.0 specifying positional parameters, as you normally would

  Kind regards

  Jason