Epsom SX130

Similar Questions

• After trying to install word printer epsom has not stopped workung - uninstalled but stll not working not

  After trying to install a printer, Epsom SX130, on Windows 7, WORD has stopped working - have tried uninstall & restore but still cannot use WORD. After paying only £ 65.00 to restore the office, I'm very unhappy. It is the only document that we need to print, others may be sent by e-mail, but now I can't even open Word documents to use as attachments to an email. I'm totally desperate, do we buy a 'small' I wonder. More than 60 years, when I started it, maybe I was just too old or it's Windows 7 just make my / our life uncomfortable for us to update: Please keep in mind, I'm very, very, ridiculous with computers. We have done with a drive by the way if that makes a difference & downloaded an update. If the answer is "not compatible" that's fine, I can make documents on the old computer, BUT need words for emails: i.e. repeat orders etc. which are vital to our system of new physicians.

  Am totally fed up now...

  Hello

  1. what version of Microsoft Office are you using?

  2. you receive an error message when you start Microsoft Office Word?

  You can perform the system restore the computer to the date when the changes were made not (before the date where Microsoft Office was working fine).

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

   

  NOTE: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  For further assistance on the question, you can post your query in Microsoft Office community:

  Microsoft Office community

  http://answers.Microsoft.com/en-us/Office/Forum/Office_2007

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• I downloaded the new software recently and now my Epsom printer does not work

  iMac late 2009. Processor 3.06 GHz

  Hi, I downloaded the new software recently and now my Epsom printer does not work and my Wi - Fi on the computer keeps dropping out.

  I spoke with Epsom and they recommended to remove the drivers and reinstall them. Now, I can not install the ad pilots Wi - Fi does not work correctly. The research on this forum I see there have been many problems with the new version of the software. Can someone help me?

  < re-titled by host >

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.

• I have a 10.1 Samsung galaxy tablet. How can I print using my printer Epsom 405

  Can someone tell me how to print from my Samsung Galaxy Tablet using my Epsom 425 series printer?

  Hi!, grandmahack:

  This site is exclusively for HP devices, but equal, I help you.

  See the following site... http://www.dpreview.com/forums/thread/3640553

  Best regards.

  Make.

• help the tp to install an Epson stylus sx130

  NEED TO FIND THE DRIVER FOR MY EPSON STYLUS SX130

  Reach:

  http://www.Epson.co.UK/store/printers-and-all-in-ones/Epson-Stylus-SX130/drivers-support;JSESSIONID=68ADC3196799E440B0FBA5A28B8FEFDE.acc4-new

  you select the version of Windows and then download the drivers. You have not told us your version of Windows, so I can't give you more specific information.

• Why my "Epson Stylus SX130" disk does not work when inserted?

  Asked me to insert the disc from the manufacturer in the drive, I did and it works not (printer).  What next please... .anybody?

  Hello

  You can download and install the drivers directly from the Epson web site - here is the link:

  http://www.Epson.co.UK/store/printers-and-all-in-ones/Epson-Stylus-SX130/drivers-support?target=driver&LanguageID=1&driverId=328202&defaultOSId=3&DRV_CATEGORY_CODE=drv

  It is best to use the latest driver from the web site to use the CD that came with the Epson printer.

  LC

• Windows Xp will not recognize my powershot SX130 IS

  Tried everthing, all USB ports, works OK on another computor, checked with canon, they have been of any help whenever I try and down load, I get a message "does not recognize the camera.

  Hi donaldPaul,

  1 have you made changes to your computer recently?

  2. I suggest you follow the methods given and check if it helps.

  3. your camera is detected in Device Manager?

  You can also try the steps in the below mentioned links.

  A digital camera is not recognized in Windows Vista or Windows XP

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  Windows XP does not a digital camera Canon PowerShot S100 (Applicable for Powershot SX130 IS also)

  I hope this helps.

• AutoPlay option does not appear on Canon SX130 when connected to the computer

  Original title: No auto play box

  AutoPlay box does not now appear for my canon sx130 (there over a year before). Just change of trend - tech off Norton Norton 360 but still no box - this only happens on this particular camera, others work very well.  I have Vista

  Hello

  Thank you for your response.

  According to the error code, I suggest you to uninstall the drivers of the camera from the Device Manager and search for new hardware reinstall the driver.

  Follow the steps below and mark the question:

  a. open the Device Manager, in the device properties dialog box, click the driver tab and then click on uninstall. Follow the on-screen instructions.

  b. restart your computer.

  c. open Device Manager, click Action, and click Scan for hardware changes. Follow the on-screen instructions.

  For reference:

   

  Open the Device Manager:

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager

   

   

   

  Your response is very important for us to ensure a proper resolution. Please get back to us by following the steps above.

• Cannot connect Epson Stylus SX130

  I can't connect my printer/scanner Epson Stylus SX130 via USB on Linksys E4200. This all ends with cisco referring me to this Web site. I reinstalled the printer/scanner, but it did not help. The SX130 Stylus works fine when I connect it directly to my computer. Any help would be appreciated

  Hello. the usb port on the E4200 is only for drives hard usb, it is not to connect printers or other devices.

  I searched on the net for your printer, and it looks like there's only a usb port connection, I'm right? If so, you can connect to your network by installing it in one of your computers and then share this printer or purchse one printserver that is compatible with your printer, and then connect the printserver to the router.

• Can't get Epsom printer Event Manager to "scan to email".

  Recently installed Epsom SX215 printer / scanner but impossible to activate the function "scan to e-mail". Everything else works OK. All the drivers are up to date. Epsom event Manger says "cannot find the scanner driver. Install the driver before using the event handler"- yet the driver is correctly installed. Checked the Device Manager and no problem.

  Hi Tim,.

  Thank you for your message.

  What is your computer make and model? 32 bit or 64it?

  You said works by scanning regardless of the scan to E-mail option, so it sounds like the hardware is OK.

  You install the event handler as the administrator?

  Have you tried to install the handler in Compatibility Mode, as he has already worked in XP?

  Has it ever worked before, the analysis of the function of e-mail on this computer Windows 7?

  Mgiht you try turning off your anti-virus software and firewall to see if it is causing a conflict.

  Is this Hooker to scan directly to this computer or is it over the network from another computer?

  I suggest you perform a clean boot to see, is that a startup program can be the cause of the issue:

  http://support.Microsoft.com/kb/929135

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Epsom Perfection 1660 scanner

  My Epsom Perfection 1660 scanner does not work with Vista, all solutions?

  Hi basil,.

  It doesn't look like the Epson Perfection 1660 is compatible with Vista. Looking at the manual for the 1660 epson printer is designed to work with Windows 98 / Me or 2000. You can view the manual on the site of Epson here:

  http://www.Epson.com/cmc_upload/0/000/018/964/P1660_InfoSheet.PDF

  Unfortunately, if there is no drivers for the scanner and the default drivers detected automatically by Vista not recognize or work with the Epson, there is not much room for manoeuvre.

  Did you just buy the scanner? If you look at a compatible scanner for Vista my recommendation would be to take back and return it for another scanner if possible.

  Hope this helps,

  Steve <> Microsoft Partner

• my printer, scanner, photo Copier epsom stylus cx3200

  my printer is only printing before start up, it is quite a pain, and ive tried everything to get my printer to work everything using my computer im at a loss that someone can advise me thanks Windows Vista

  Hello

  This would be better addressed by support of Epsom: http://www.epson.com/cgi-bin/Store/support/SupportIndex.jsp

  Otherwise, I will move this to the Group of printers.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Windows 7 Home Premium - Epsom Stylus Color 880 printer inkjet problem

  I'm under Windows 7 Home Premium using a printer Epsom Stylus Color 880 ink jet, fortunately so far when, without apparent reason, all lights started flashing on the printer. (inks, papers and power) I, ve tried switching off the power etc, but nothing helped. I dug the original disc to see if I could reinstall the software, but a message pops up saying that the system is not compatible. No problems so far and I've used the same Acer laptop now for a few years without no problem installing printer. Any ideas on what could have happened, are there drivers I can download on the thought that there is a corrupt file somewhere I also checked and there seems to be no jams etc.. Thank you

  Hi Eckiemo,

  ·         Did you do changes on the computer before the show?

  ·         What is the exact full error message?

  ·         Are you able to print from the printer?

  This product is discontinued, is replaced by a new one.

  EPSON Stylus Color 880 Ink Jet Printer

  Follow these methods.

  Method 1: Follow the steps in the article.

  Printer in Windows problems

  Method 2: Do a System Restore and check.

• Where to find drivers for scanner Epsom Perfection 2480/2580 Photo?

  Original title: Epsom Perfection scanner 2480/2580 Photo

  Anyone know where I can get a driver that I can install in my computer Dell 660 which ha Windows 8

  It is an abandoned scanner and old scanners do not work in windows 8, unless there is the driver & software for windows 8.  Use this scanner on another computer or replace it with a new printer-scanner model. According to the website of compatibility 8 win, this scanner is not working on windows 8. Epson 2480

• With the help of Photoshop CC with Mac, Yosemite 10.10.5 printout to an Epsom Stylus 3880 with 9.17 printer driver, all the prints to come very dark can help?

  I am a new user of Photoshop CC which is on my Mac using Yosemite 10.10.5. I try to print on my Epsom Stylus Pro 3880 use version 9.17 printer drive. All my prints are coming out very black, could someone help me with this problem

  I printed a number of images that I've adjusted PS CC and print using opening, they were much better, but not as good as my no CC prints.

  I'm not in my system for now, I'm at work, but I'll do as you suggest when I get home.