Epson scaner tx220

Similar Questions

• Epson Scan software crashing now

  2 days ago, that the Epson Scan application started crashing immediately on opening.  I spent literally 3 hours online with Epson.  In the process I've uninstalled and reinstalled the entire Epson folder, cleaned and reloaded the files library and preferably, but still get the same result.  I tried the setting up of a new user on the computer and first on this new user account that I could open the software but the second time I tried it immediately crashed on the opening.  I guess that I have a conflict with another application or something in the OS, but I'm at a loss at this point.  It is a request that my wife uses frequently so any help would be greatly appreciated.

  Greetings sawatchboy,

  Thank you for using communities of Apple Support.

  I see from your post that your Epson scanning application started crashing immediately during opening. You have talked with Epson and tested this question in a new user account, and you are still having a problem. I can certainly understand how it is important that you are able to use your scanner software. I'm happy to help you with this problem.

  You mentioned a potential conflict with another application. I would recommend from your computer in safe mode and then do a test to see if you get the same result with the Epson application crashing. Safe mode (sometimes called secure boot) is a way to start up your Mac so that it performs certain checks and prevents certain software from loading automatically or opening.

  Use OS X El Capitan: start in safe mode, more precisely, this section:

  Start in safe mode can help you diagnose problems you're having with your Mac.

  Important: To print these instructions, click the Share button in the Help window, and then choose print.

  1. Choose the Apple menu > shut down.

  2. After your Mac stops, wait 10 seconds, then press the power button.

  3. As soon as you hear the startup tone, hold down the SHIFT key.

     You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.

  4. Release the SHIFT key when you see the gray Apple logo and progress indicator.

  To exit safe mode, restart your Mac, but no press during the startup.

  If you find that you are not having a problem with safe mode, take a look at the section 'If a problem does not occur in safe mode"in the article below.

  Try safe mode if your Mac does not end commissioning

  Best regards.

• Where can I find Epson scan v3.2.4

  I had to do a clean install and I lost my Scan.app of Epson. Epson no longer stand 10.8 OS so that they are without help. I'm trying to find download Epson Scan 3.2.4.

  Thank you

  Usually software continuous Epson driver for the ancient operating systems on their site. It is not easy to search specific version numbers, but if you know the model, you should be able to find it on http://www.epson.com/cgi-bin/Store/support/SupportIndex.jsp?

• Will not install driver installer of EPSON Scan (L210) - ' error occurred when installing re start the computer, and then try again.

  Original title: problem installing scanner

  EPSON Scan (L210) setup driver moved - "is an error occurred when installing re start the computer, and then try again.

  Hey there, MAHIPALSINGH143

  Welcome to the Microsoft community forums.

  So that the community help to install your printer, we will need more information. Please answer these questions:

  1. Windows what operating system are you running (Windows 10, 8.1, 7)?
  2. The troubleshooting steps have so you far?
  3. Did you upgrade to a new operating system?
     1. If Yes, what operating system you were on before?

  When you look at the error message, it doesn't look like you need to update your drivers. You will need to go on the official website of manufacturers, with your EPSON.

  Here is the site for the EPSON drivers: http://www.epson.co.uk/gb/en/viewcon/corporatesite/support

  When I entered your model of "Epson Scan (L210)" number, it does not recognize the product. Would you be able to check and make sure that you have provided the correct model number? Your model is a new printer?

  Kind regards

• Epson scan has stopped working.

  I recently bought an ASUS Essentio CG5290 computer that uses a 64-bit system.  A few weeks later, I bought an Epson Workforce 600 multiprinter.  I know for sure the Epson multiprinter works perfectly well because I used it on my old Dell Dimension 4600 computer that uses Windows XP (I suspect the system uses a 32-bit).  When it is connected to my ASUS computer which uses Windows Vista, everything works fine until I try to use the scanner.  When I click on the EpsonScan icon I immediately get a Message from Microsoft Windows saying "Epson Scan has stopped working".  A few seconds later, it gives me another message saying: "a problem caused blocking the program works correctly.  Windows will close the program and notify you if a solution is available. "I never got a 'solution '.  I tried to uninstall and reinstall the printer software to download Windows Vista Service Pack 2.  There are available for the ASUS BIOS, manufacturer downloads, but I have to buy the program WinZip to download.  I'm nervous about messing with the BIOS.  I think that my problem scanner printer has something to do with the ASUS having a 64 bit OS against compliant system to the requirements of the twain_32 printer.  I qualify for the free upgrade to Windows 7 when it is released to the public in October ' 09.  This will solve the problem?  My ASUS has every update of Microsoft Windows to date.  I'm not very computer so any advice is greatly appreciated!

  Did you get the drivers Vista 64 of Epsom first and install according to the requirements of the Epsom, which is usually to install software / drivers prior to the connection of the printer

  PS You need not buy winzip in order to upgrade the bios, but then, aren't an update of bios support

• Driver EPSON Scan Setup installs - "error produced during installation to re start the computer, and then try again.

  New Epson Scanner GT - S50 Epson scan, set up driver will not install. keeps giving me "is an error occurred when installing re start the computer, and then try again" works fine on another pc with windows 7, but not from Dell. Tried to download from the website and cd. all other software is loading fine. Epson technical support cannot fix. Help!

  I finally had my Epson GT - S50 working. I have a contract with support iYogi.They tech were recommended by Dell.  It took them more than 12 hours to solve this problem. They had to do a full factory reset. I have had all my drives. The alleged problem with mine was HP. I have a hp all-in-one. It damaged my windows files. On re install, I had to install Epson scan first, this hp. I would not buy an epson again. The product works well now but still double flow a lot and is very picky. When it works well, it really accelerates my work verse scan with the Hp all-in-one. I'm really happy that I have a scanner, but wouldn't recommend an Epson.  I highly recommend I have Yogi tech support. They are worth every penny.

• Epson scan cannot be started.

  Window appears indicating that epson scan cannot be started. There may be a problem with the network settings.

  Having checked that the settings can not find the problem.

  You have installed a compatible version Windows 7 Epson Scan, which is also compatible with the scanner?

  http://www.Epson.com/cgi-bin/store/support/supAdvice.jsp?BV_UseBVCookie=Yes¬eoid=147071&type=highlights#professional%20Imaging%20Printers

• Don't start the EPSON Scan in Windows 7 application

  Hi all

  When I try to run the Epson Scan application, nothing happens.  Let me explain further.

  I have a printer all-in-one Epson Artisan 837 that never gave me any problems on my old Dell under XP SP2 desktop computer.  I recently bought a new Dell Windows 7 Professional XPS8700.  First, I used the printer installation CD and follow the instructions to install Epson.  After installation, the printer works fine, but when I try to start Epson Scan, nothing seems to happen.  I connect the all-in-one to the PC via USB.  Then, I uninstalled all Epson Utilities and tried to reinstall using the package of utility combo for Windows 7 64 bit download on Epson site.  The result is the same; nothing happens when I try to start Epson Scan.

  In Device Manager, the printer appears under imaging as expected devices.

  An image can be obtained using Microsoft Paint (opening "from scanner or camera").

  Printer works fine.

  The all-in-one has also four slots for memory cards, which work very well as well.

  Another Epson utility, called the Epson Event Manager also does not work.  At the launch, I get an error that States, "cannot find the scanner driver. Install the driver before using the event handler".

  I went through the Epson technical support for several days and the result is always the same.  Today, they said that the problem is not related to their products and that there is something in the operating system that prevents the application to open.

  My only thought is that Windows can use its default driver, not the Epson driver.  However, if I try to update the driver through the Device Manager, I always get a message that the more exact driver is already installed.

  Does anyone have suggestions on how to determine what is the problem and why Epson Scan does not work?

  Hi Jason,

  The problem you are experiencing has become a common issue. This issue may have caused due to any third-party firewall or security software. I would like to know some information about this problem so that we can help you further.

  1. using any third-party security software or a firewall?

  2 have you made changes on the computer before this problem?

  I would suggest trying the following methods and check if it works for you.

  Method 1:

  Run the Fixit for the following Microsoft FixIt link and.

  Hardware devices do not work or are not detected in Windows:

  http://support.Microsoft.com/mats/hardware_device_problems/?WA=wsignin1.0

  Method 2:

  Disabling third-party security/firewall software has helped to solve this problem in the number of threads, so as a second method try to temporarily disable the third-party security/firewall software and check if it helps.

  Disable the antivirus software:

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Enable or disable the Windows Firewall:

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Warning: If you need to temporarily disable the security/firewall software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3:

  Make sure that the services of Windows Image Acquisition (WIA) is running and set to automatic or not.

  a. click Start and type services. MSC , and then tap on enter.

  b. check if Windows Image Acquisition (WIA) is running if not.

  c. right-click on the WIA service and select Properties.

  d. change the startup type on automatic.

  e. click on apply then Ok to save the changes.

  For more information, you can consult the following Microsoft Help articles.

  http://Windows.Microsoft.com/en-us/Windows7/scan-a-document-or-photo-with-Windows-fax-and-scan

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-fax-and-scan

  Please reply with the status of the issue so that we can better help you.

• How to set EPSON Scan 3.07 to work in Adobe Photoshop CS6 Import window in Mac OS 10.9.4 Mavericks

  I cannot scan with my EPSON Perfection 2480 PHOTO scanner images, as it did when I used Photoshop CS2 Photoshop CS6. I downloaded the latest driver (EPSON Scan A 3.07), and placed his plugin directly in the folder Plug - ins Photoshop CS6, it is still not appearing in the import / import Images from the Device menu option. Is there a way to make this work? Certainly, I am able to use EPSON Scan out of Photoshop, but I would rather simply scan while in Photoshop CS6. (I use a Mac using OS X version 10.9.4 Mavericks).

  No doubt read this article: Get your scanner to work with Photoshop CS6 | Macworld

  More than likely your Twain driver is 32-bit and Photoshop CS6 is pure 64-bit. Then you should look at the ideas in this article.

  Gene

• Epson Scan not available in PS CS4

  Unlike my previous versions of PS, I installed everything I should including the Epson Scan software / interface.

  I have no possibility of the Epson Scan within the PS, including the usual cue file > import tab... nothing there.

  I can go to the system preferences. "Print/Scan" and the disk for example.  It is my only scanning App and is defined as the preferred printer and scanner.

  Are there known problems or limitations with Epson Scan software and PS CS4?  No miracle solution?

  Thank you!

  It is not a good idea to use the epson ps Twain plug that I don't think there's one that actually you would actually have to install the acquisition of twins made the Goodies folder on the installation disc.

  I was determined that we'd be better off for reasons of stability analysis in the stand-alone version of the Epson Scanner Drivers.

  If you use the pug wain in will you be sorry you did.

• Where can I get a driver for Epson scanning for my iMac os 10.11.3

  I have an iMac with the current version of El Capitan 10.11.3. I bought an Epson Stylus pro printer (WF-5690). I downloaded and installed the driver scanner of Epson Web site and the error message indicates that the computer does not Scan of WSD. How can I get on my iMac. I couldn't find Capture of Image or the other. The printer and the computer are on the same connection network wi - fi. What can I do to get the scan function to work with my Mac? I appreciate any help anyone can give me.

  Sincerely,

  leonorafromarcadia

  WSD is not available for OS X. WSD stands for 'Windows Vista Web Services on devices (WSD)'

  Image capture is in your Applications folder. I have an Epson WF-3620 and it works perfectly with the Image Capture and El Capitan 10.11.4.

• Epson perfection v500 scanner scan from buttons

  It runs from the office, but not the buttons.  It worked fine on windows xp will not be Windows 8

  I downloaded and installed the update of windows 8, restarted the computer and still does not work

  It's always something you face with EPSON.  Their product, they support (or not) under any given operating system.
   
  You have downloaded and installed this?

  Windows 8-32/64-bit driver of the scanner and EPSON Scan Utility v3.7.7.3

  If you did, you should contact Epson:
  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&category=products&infoType=contact&OID=88368&prodoid=63070478
   
  I note that the driver and the software was published 07/22/10 - my bet is that they could tell you "features do not work under Windows 8"and they can do SOUND like it's the fault of operating systems rather than change of drivers and software for working in the operating system.»

• Scanner Epson V700 with OS 10.11.3 on iMac

  Old problem with scanner Epson V700 is back after a few months to be confident that she was working.

  Image capture can't find the scanner. Downloaded Epson drivers again without a fix. So what happened again to the scanner?

  This original problem occurred a few months ago, when Apple set to upgrade to El Capitan and weeks later made the corrections with a new version of OS 10, who brought the peace around the world for many users of the printer/scanner. Is this a problem Epson or Apple?

  You have downloaded and installed

  Epson Scan Patch for OSX 10.11 (v1.0)

  which is necessary if you are using a proprietary Epson software.

  There is also a new ICA driver

  ICA Driver (v5.8.6)

• I can't install the Epson software

  I have Yosemite OS X installed on my Macbook Pro 2009. Everything works fine, but refuses it to operating system to allow me to install the software of Epson scanning for the scanner SX 415 printer. Displays a message that the software is not in the app store, so it can not be installed. How can I get around this?

  Open the privacy & security preferences and click the general icon in the toolbar. Click the lock icon and enter your password admin. Select the bottom option: anywhere. Close the preferences. This should fix the problem.

  For any other problem with the Epson software, you should start with Epson tech support for help or check for current versions of software shown to work with your version of Mac OS X.

• Epson CX6000 Scanner does not install

   

  I tried to install the scanner and I have this error message.  The printer is installed correctly and works fine.  The scanner works fine with my XP laptop and I also cancelled the driver to use XP with no luck.

  My computer is a Dell XPS 410 with Windows Vista Home Edition.

  Description

  Signature of the problem

  Files helping to describe the problem

  DMIFD46.tmp.log.XML

  oem71.inf

  Problem event name: PnPDriverInstallError

  Architecture: x 86

  Win32 error: 00000002

  The INF name: es6c.inf

  Driver Package hash: 2ad4f6c686034e9b0f8885c25bb9eb35893a7649

  DDInstall section name: USB. ES6CXP

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 1033

  Windows encountered a problem installing the device drivers for your EPSON Scanner

  It is an another Error Message as well:

  Additional information about the problem

  Bucket ID: 21675281

  Signature of the problem

  Problem event name: PCA2

  Signature of the problem 01: escfg.exe

  Signature of the problem 02: 3.0.4.1

  Signature of the problem 03: EPSON Scan

  Signature of the 04 problem: EPSON Scan

  Signature of the problem 05: SEIKO EPSON Corp.

  Signature of the 06:100 problem

  Signature problem 07: 1

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 1033

  If Epson scan does not see the scanner, he dies.

  You can install the drivers by going to the Device Manager and using
  the method of updated drivers. Choose to update the drivers, and then tap
  the CD or the folder where you have the drivers located.

  This should get your drivers installed. This is however not
  ensure that epson scan is able to see your scanner
  and working properly.

  The best way to get the software running is to install
  the virtual machine as well as XP mode if you have this option.

  Download Epson provides on their website shows that the
  Epson Scan in the Setup.exe file has been updated in 2008.
  They have not changed the software to deal with the issues which
  they will continue in Vista and 7.

  You can test your scanner using MS Paint that does not work
  Use Epson scan. Menu - from a scanner or camera.
  If this menu item is not dimmed, paint sees the
  scanner or camera installed. It can acquire images of
  the scanner without the need to use Epson Scan.

  Unfortunately, it seems that most programs such as Photoshop.
  try using Epson Scan.

  The problem with Epson Scan is the USB connection.
  For some reason, the Protocol of USB port is
  built-in Epson Scan fails in Windows 7.

  If you have a 80x11b wireless network router,
  You can configure Epson Scan to use the wireless
  connection to the network.

  After I configured my workforce 610 connect
  for the wireless network and then configured
  Epson Scan to use this connection,
  Epson Scan has been able to connect to the Scanner
  and run correctly.

  If the wireless network protocol is disabled,
  Epson Scan will stop working.

  Keep in mind that this is not a Windows 7 problem,
  It's a program third question "Epson Scan.

  My guess is that Epson Scan is the search of the
  USB scanner.

  With regard to this forum:

  It is the worst program I've ever used.

  It is clear that the programmer never used and never

  bothered to test it.

  connection incorrectly.

  Scott A Tovey