Equium 100 fail to start

Similar Questions

• Equium A200 fails to pick up WLan after fashion "Eve"

  My laptop Equium A200 fails to capture my wireless network when awakening from the sleep state, even though another laptop alongside of picks up immediately, like my cell phone.

  I downloaded the updated driver.

  If the computer is restarted it back pretty quickly.
  As I use 'sleep' a lot it is very frustrating. any ideas anyone?

  Hello

  Your BIOS is up to date?
  Operating system is up to date?

  You can try the driver from this page:
  http://APS2.toshiba-tro.de/WLAN/

  I remember that my laptop has developed the same issue. But it was just for a short period.
  After the awakening of the mode setting in hibernation, the cannot connect to router Wlan Wlan.
  But I fixed the link and that was the key.
  In the taskbar right click on WLan icon and choose repair.
  The DNS address IP etc. should be updated and usually helps.

  I ve also renew the IP address in the command box (start back box command: cmd)
  I used the command: + ipconfig / renew.

• the application has failed to start because its side by side configuration is incorrect

  I downloaded the new firefox and when I try to open it I get this message that the application has failed to start because its side by side configuration is incorrect

  Seems to be caused by a corrupt installation of Visual C++ (several versions can be installed-by-side).
  
  You can try to use the sxstrace tool to see if you can find which files are missing or damaged.

  • http://www.Vistax64.com/software/245768-side-side-configuration-incorrect.html

• Satellite 1800-100 won't start with new memory

  My satellite s1800-100 won't start although my new memory (2nd) module is 128 MB PC100.

  I have Samsung samsung K4S281632C-TC1H module as PC100 (128 MB) memory on SLOT 1 by default.

  Although all of the features and form factors are clean, why not my Satellite S1800-100 starts? I checked the new (slot 2) memory works fine and tested OK.

  So, is there as a possibility to have a problem in the 2 Slot? Or is associated with failure of the BIOS? (there is no more recent BIOS, current is 2.20 for Satellite S1800-100).

  I am disappointed. I bought a new 128 MB PC100, to insert it in the slot 2, my Toshiba didn't boou up!.

  Important note: if I connect the new memory I bought yesterday, works very well in Slot 1.

  Please help and understanding.

  Kind regards...

  Hello

  Well, it very difficult to say why it won't start.
  I think that there are several possibilities:

  (1.) you used a bad module
  (2.) the second Bank of the Board of Directors has a malfunction
  (3.) the laptop does not support max 256 MB of RAM

  I think that point 1 and 3 is not relevant because you have tested the module and it worked on the first location. Additional the laptop should be able to handle 2 x 256 MB memory, so you should be able to use 2 x 128 MB

  I think that the second ram location may have a malfunction.
  Please check the second slot with a module of memory.

  The second possibility is to use exactly the module which is recommended by Toshiba.
  As I remember it s PC100 128 MB (PA3005U) SDRAM

• Equium L10 will not start

  Please help - my Equium L10 will not start.

  Power supply is OK. When the power is connected the orange battery light comes on. I press the power button the green power light turns on momentarily (literally a Flash), then both the Green and orange lights out with orange alone returning it on about 2 seconds later.

  Else does nothing - no fan activity, no hard disk, no activity of the screen activity, no other light - you get the picture!

  I tried the following:
  Removed battery and tried to start with AC power not only - no joy
  Removed AC power and I tried booting with battery only - no joy
  Barrette of RAM removed and reinstall - no joy

  Does anyone have ideas before considering a tech? Suggestions (with the exception where to paste!) would be welcome.

  Kind regards

  Gary C

  Hmm .He doesn't sound good. For me, it looks like a motherboard problem. It is maybe something wrong with electronic power to the Board of Directors of s. But not for sure.

  What you can do is to remove the battery and unplug the power adapter for a while.
  Wait about 20 minutes and connect the battery and adapter for the laptop. Then try turning on the laptop computer.
  If this does not help I recommend contact the ASP technician, because I don t think you will be able to know what's exactly wrong.

  So I hope that the technician can find the fault quickly and can solve this problem.

  Good luck

• Tecra A9 fails to start because of system file is missing

  Hello
  I bought tecra 1 month and now I can't open my laptop

  It has windows xp pre installed and fails to start windows
  because the file system is missing.
  What can I do?
  I don't have a floppy drive to insert the startup disk
  Help, please!

  Hello

  Why you need a floppy disk?
  As far as I know this laptop has an internal CD/DVD drive.
  I think you simply boot from the Toshiba Recovery CD and must be reinstalled the operating system!

  If all goes well it s not a serious fault because sometimes this seems due to HARD drive failure.
  But like I said above usually the new installation of operating system restore CD for this problem

  Good luck

• Re: Satellite A300 sometimes fails to start

  My Satellite A300 sometimes fails on start when displaying a logo of Toshiba.
  I don't know why. Y at - it a touch to show a p.o.s.t. tests?

  Sorry for my English.

  Hello

  You can change in the BIOS the option to boot from normal to fast.
  I think that this will disable the Red Toshiba log and show you the post screen.
  But to be honest, I don't know if this could be help full.
  In any case, if the laptop is unable to pass on the MESSAGE, something might be wrong on the motherboard; the modules, memory example or similar

• Satellite A500 fails to start

  Hello

  Once in a while (almost once a day), my A500 fails to start.
  When I hit the power button, weird lines appear on the screen immediately, and it seems that there is not a lot of power goes to the processor.
  It will stay like that until I hit the power button to stop it.

  http://img52.imageshack.us/img52/5418/20112010747.jpg

  It seems to start fine if I leave for an arbitrary amount of time before trying again.

  Any thoughts?

  See you soon.

  HM. For me, it looks a bit like a motherboard maybe hardware problem or GPU.
  You are able to access the BIOS?
  Please try this and set the default BIOS.
  In addition, I would recommend setting the notebook back to factory settings to check if an improvement is noticeable.

  But if his equipment really then issues you should get in touch with a local ASP you know

• Equium L10 300 Wont start white screen

  Hi I wonder if anyone can help or advise me with a problem starting

  It's a portable satellite L10 300 XP homedition, after running PC doctor to remove Popups and adware my laptop stopped commissioning.

  Initially started after the system check it kept returning a blue warning screen that flashed off very quickly before close and try to restart this making it very difficult to read, but I managed to do something about a problem of physical memory and the dumpster, I managed access the options of safe mode and tried each of the options including the last good configuration known, but all failed to start the machine and I'll be back the same error message. Then at some point with all of my violin that it now wont even run the system check before crashing it's now only the initial startup which allows me to access the system BIOS F2 and F12 and nothing more.

  I have the product recovery disc and tried briefly before interupting it is when I realized the instructions say it will reformat the hard drive and I'll lose all my data that I do not wish to.

  Is there a way for me to fix it or copy extracts my data before using the product recovery disc.

  Thank you very much in anticipation.

  First of all, you should check the memory, it may be altering the data. Have you recently installed spare memory? Go to www.memtest.org and memtest from a floppy disk or a bootable CD.

  To recover your data, you can remove the HARD drive and connect it to another PC using a 2.5 "USB adapter. Then put the HARD return drive recovery to and execution.

  PS. You can view the blue BSOD code by pressing F8 at startup of Windows start and select 'Disable automatic restart in the event of system failure' in the Menu.

• Equium A300D will not start.

  My Equium A300D does not start. It just displays 'the file is possibly corrupt. The file header checksum does not match the checksum calculated. Why? What can I do? I have only a few months.

  Have you installed lately new RAM? Its important to the RAM test before use. Or the standard RAM is possibly defective.

  Go to www.memtest.org and run Memtest for a few passes (it is a bootable CD).

  The file system may be damaged, try running CHKDSK from the Recovery Console. http://support.Microsoft.com/kb/314058

  The HARD drive could be faulty, Hitachi DFT is a good HARD drive tester. Run the test advanced to search for bad sectors.

• Equium A100-338 has started to go very slow after using the recovery CD

  I used the recovery CD after my Equium A100-338 has started to go very slow, it still seems slower than it used to be.
  I haven't added anything to the computer from the CD recovery and verified the Manager tasks to see if I could spot anything suspicious.

  Statistics say, use 18-22% CPU, but the physical memory is about 68% is this normal or should it be less?

  Is there a list of standard processes I can check against mine to see if its doing something, it shouldn't be?

  Thank you

  Hello

  I think you feel that unity is a bit slow due to the high amount of different processes that run in the context of the BONE.

  The fact is that your laptop supports various features such as buttons FN, Toshiba control buttons, etc.
  All this has needs drivers.

  In addition, as I m not wrong the Norton Internet Security has been installed on your system.
  It s part of the image of Toshiba and this tool could affect the performance of the system.

  I have used in the past, but now changed to another application that doesn t need a lot of material resources.

  So if you want you can disable or delete some of the tools and utilities that are not important to you and could clean the system using a 3rd third party tool called CCleaner

  Welcome them

• Equium A60 will not start

  Hi, I am despartely needing help with my A60 equium that won't start. When you turn the button lights up, fan and starting, but then in a few seconds the cutting power. I tried different sources of energy, also just by using ac power and battery just all produce the same results. I had installed a memory chip a few months back and thought it might be that, but when I took it off the laptop has always been the problem.

  Is there that anyone may be able to help me with this problem? Thank you

  TAF

  Hi Michael,

  The first thing that happens when your, press on the power button on your laptop, it's that the CMOS chip (which contains your BIOS) through a pre-deignated POST (Power On Self Test) process that verifies the functions of the material of base components after what the BIOS will be charged which will lead in turn to the operating system itself being started.

  If a failure or a problem occurs during POST and then power on the sequence stops (usually after a series of beeps are emitted that are coded to help the diagnostic process. The actual beep codes are specific to the manufacturer of the CMOS/BIOS chip.

  If you receive no all audible sounds, then it is likely that the problem is very early in the POST process and may indicate a problem with your main card or your electronic internal.

  You can try to remove and and reinstall devices such as RAM memory modules, hard drive, optical drive, etc to see if this corrects the situation, but if not then you will need to take the device to authorized, Service partner who has the diagnostic equipment needed to perform accurate control.

  Kind regards

• HAB check failed for start / could not validate the boot image

  Hello

  I have neglected my E bike for a few weeks and when I loaded and it fed today, it shows a menu and:

  HAB check failed to start

  could not validate the boot image

  Tried all the menu items and none of them worked. For me, it's very odd behavior, because BONE is not affected since the last Android 5 update, several months ago.

  Are there opportunities for the device?

  If you can't make an external reset via hardware buttons, then your phone will have to service.

• Satellite P100: HARD drive sometimes fails to start or just not responding

  I have a satellite P100 on xp professional service pack 2. Sometimes it fails to start and appears as if the hard drive just stopped responding, does not require defragmentation.

  Checked all Diagnostics pass, can get it started by selecting the boot options multiple F12, HDD that appears first in the list.

  Although it seems not take a long time.
  Sometimes it seems to stall at the start to the top but picks up then after a few minutes and fortunately sometimes it starts without a problem.

  What is data corrupted in the bios? but then why it starts ok sometimes and not others? It doesn't matter if it's hot or cold.

  any ideas or help greatly received.
  David

  Post edited by: daviddean

  Hello David

  It's a very strange situation, and for me there is no explanation simply. In my opinion the laptop or HARD drive, the functionality must be tested properly. Here in the forum we can speculate just what is the problem here but mobile startup must be tested with the other HARD drive pre-installed with original recovery image.

  It will be interesting to know if the problem disappeared with new HARD drive. So what you can do now? If possible, try to get the second HARD drive and do the only testicles or make a call to the authorized service center and explain the situation. If the laptop is guaranteed to be valid, it will be better to check in service because they can replace free HARD drive (if the HARD disk is defective).

  Sorry, but I don't see another solution. Some test with the new HARD drive can help you to understand if this happens because of the HARD drive. I don't think that the BIOS can be responsible for the issue described.

• Failed to start the test

  I have a hp pavilion g7, Windows 7
  
  Starting tonight, my laptop fails to start and freezes on the "getting started" page view. After several of the recommended options, I ran the test that does not start.
  
  The display screen reads-
  Memory test: past
  Smart check: past
  Dst short: failure
  
  Failure ID: GU6E00 - 63479 L-MFPX01-60TP03
  Product ID: A7A44UANBA
  
  Hard drive 1
  
  Starting test: failed
  
  Where should I go here for this problem?

  Hello

  Error code 24 characters for short drive Self Test (DST) would indicate that hard is defective and must be replaced.  It is also compatible with startup problems you describe.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and you want a guide on replacing the hard drive you, please let me know...

  Kind regards

  DP - K