Equium A100-147 of the shield 6001 Setup error

Similar Questions

• Equium A100-147 - bought the bad battery

  My Equium A100-147 is about 3 years now and won't hold its charge longer than 10 minutes so I bought a used one on eBay for a broken machine.
  The battery itself is quite new in terms of use-life, his laptop computer that failed!

  It's the wrong kind.

  Been declared as Toshiba equium laptop battery but it is of course many variants.
  My battery model number is: PA3399U-2BRS 10.8V 4000mAh

  EBay battery model number is: PA3384U-1BRS 14.8V 4300mAh and nealy twice the size! (Could someone tell me models that suit so I can sell it on)

  My mistake!

  Pete has soon.

  Hi Pete

  Before you wait here put the part number in Google and you will find on what mobile phone models can use this type of battery.

• Upgrade of RAM Equium A100-147

  Hi, I have an Equium A100-147 with the standard of 1 GB of RAM (512 MB + 512 MB pc-4200) professional XP.

  I'd like to update, and I was wondering if it would be allowed to replace one of the 512 MB sticks with a single stick of 2 GB pc-5300. RAM would be then 2 GB pc-5300 plus 512 MB pc-4200 = 2.5 GB in total.

  Or would it be better to buy 2 x 1 GB sticks of pc-5300 and sell or discard existing memory?

  I see a significant speed increase over the existing configuration of the Ram?

  All advice appreciated.

  Thank you.

  I agree with Akuma, it would be better to use 2 x 1 GB modules.

  This combination with 2 GB and 512 MB with different (PC4200 and PC5300) specifications could make problems like freezing, BSOD, etc..

  At present, the price of memory is very cheap, so I think that this should not be a problem.

• Equium A100-147: I get an error during the recovery procedure

  Hi again,

  I had trouble with my equium a100-147.
  I tried a restore, but the disc is scratched so I phoned in ESL and it snet me a new recovery image.

  I tried the new recovery disk and am now errors when I boot the disk.

  error is

  "internal error crc file: \WINDOWS\$NtUninstallKB895200$\msdtctm.dl.

  any suggestions are welcome. get really annoyed with my machine as my warranty expired only one month

  Thank you

  Hmm... I studied a bit and it looks a bit like a malfunction of the partition.
  It would be desirable to boot from the original CD of Microsoft XP and to start the repair console.
  Then you could try these various commands which help to repair the boot manager, repair errors, locate bad sectors and recover readable information.

  -fixboot
  -fixmbr
  -bootcfg /rebuild
  -chkdsk /r

  If this does not help, you should erase the entire partitions and must format the HARD drive in NTFS file system. Then access the BIOS and set it to the default value.
  Once this procedure tries to start again on the new recovery CD!

  Good bye

• Impossible to update the setting of DVD region on Equium A100-147

  Hi I have an Equium A100-147 with a CARPET * a DVD-RAM UJ - 841S and I am returning the dvd region 2 region.
  Tried to go through Win DVD, media player and the Manager of devices but not successful on all occasions.

  Whenever I thought I left a change of reference, but when I say yes I want to make the change, that is not the case.
  I tells me that I must use a region 2 media (do) and the administrator (this is me - I'm the only user).

  I now regret letting my nephew use the laptop for watching a region 1 dvd.
  Am not longer under warranty but have whateverhappens coverage of curries.

  Help, please!

  If you check the properties of ODD under DVD Region changes remaining how is noticed?

• Question on the disk anti-shock HARD on Equium A100-147

  Don't Equium A100 - 147 HDD have the same shock of the A120 series?

  Hello

  Sorry, but the Equium A120 is unclear to me. Where did you find information on this laptop and HARD shock anti-mecanisme disc?

  I found some info on the new feature called Toshiba EasyGuard.
  Protection of hard drive (HDD) a feature of Toshiba EasyGuard is designed not to damage the hard drive and disks of data caused by the shock, fall or vibration.
  This feature can be found in the device under the section manager system devices as driver of Toshiba HDD protection shock sensor.
  But unfortunately, I don t find anything similar on the Equium A100

• Equium A100-147 - Native resolution on the external LCD display does not work

  Hello

  My Equium A100-147 has 1 VGA and 1 S-Video output, so I use the VGA output on an external LCD monitor with a native resolution of 1680x1050@60hz, but integrated graphics Intel 945 card doesn t give me the correct resolution to choose for this monitor, the closest is 1600 x 1200 and some weird widescreen resolutions other that make my monitor see the scaling an ugly picture.

  So I tested another external monitor with a native resolution of 1920 x 1200 resolution closest gave me Intel drivers is 1920 x 1080, even the installation of two drivers of monitors, remove and reinstall the driver and same formatting the machine and reinstall everything from scratch gave no different results.

  I have another laptop MSI Wind with the same graphic card built in and the same version of the pilot, and the laptop detects both the monitor and the good resolutions for them, this isn't a problem of Monitor driver.

  Seems to me that is a problem with the S-video output, which makes this mess, but there is no way to disable it in the BIOS or any other place in Device Manager I still seem.

  Can someone give me some advice for what can do?
  Thank you!

  Hello

  You cannot choose the preferred resolution because the graphics chip does not support this external resolution or the installed graphics driver is not contained in this resolution. The two cases are possible.

  If you want to know if your graphic chip supports this resolution and then take a look at the user manual and check it.

  If the chip of the graphics card would support this resolution and you will not be able to choose, then that would mean that the graphics driver does not support this resolution.

  But first he must find out what external resolutions are supported by the GPU.

• Equium A100-147 - where to find the ethernet LAN driver

  Hi all

  I have problems to find the dirver for my ethernet controller...
  I went to the toshiba Web site and on the LAN driver is not finished, he does that with any application to uninstall, doesn't have to install, missing problably...
  I could find on the web...

  I managed to install the wirelles, so I can use the net over there... but I want to install the LAN as well...

  Anyone know where I can find driver (ethernet LAN) Equium A100-147? *

  Thank you very much...

  Hello!

  Have you tried to update the BIOS?
  Check the Toshiba site for a newer version of the BIOS:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Equium A100-147-glitch-pop-crack if the sound is muted

  Hello.

  I have an Equium A100-147 with Vista home Premium SP1 and 1 GB of RAM.

  Recently I get a glitch-pop-crack from time to time even if the audio output is cut.
  Have no idea what could be the cause?
  I'm more or less certain that everything is up-to-date.

  Thanks in advance.

  I never heard a question also and now I can t say what's the reason for this. :(

  You have the same problem on external speakers?
  What operating system do you use?

  Perhaps you need to update the audio driver you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good luck

• Equium A100-147 would not start

  Equium A100-147 would not start. Only the lights next to the CapsLock F10 F11 keys are on. When the switch is pushed the lights disappear back only after about 15 seconds.

  Help, please.

  Disconnect the power adapter and remove the battery. After doing this press the power for 30 seconds. Wait a few moments, connect the power adapter only and try to start your laptop.

  What happens when you do this?

• Equium A100-147 - deleted CD/DVD drive

  I uninstalled the readers of DVD/CD ROM of my Equium A100-147 model PSAABE by mistake. How I can I restore it? I'm not very technical

  Hello

  It means that your CD/DVD drive is not more?
  Have you already checked the Device Manager if the drive is visible or not?

  Otherwise, you must follow the instructions in this Microsoft KB article:
  http://support.Microsoft.com/kb/314060

• Equium A100-147: need a new disc of restoration as mine has been a scratch

  Having a little trouble with my Equium a100-147.
  Tried a recovery from disk and I got up to 75% and recovery stopped.
  Taken to a computer shop to get it fixed and they couldn't do anything because they do not have a disc of recovery in good condition.

  Is there anywhere I can download the image to a different computer, put it on a dvd and restart from that one?

  Contact the ASP in your country and order the necessary CD

  Here you can find near the ASP in your country
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

• Equium A100-147 replacement hard drive

  Hello

  I got a toshiba Equium A100-147 by a friend. The only problem is that it comes without a hard drive, because he still destroyed his old hdd to protect its personal and professional data.

  I saw in a local computer store a disk sata hard very good price for only? Â £38 it's a 160 GB w Digital Scorpio 5400 RPM 8 MB Cache S - ATA HDD laptop someone knows if it will work or this laptop does it work-specific hdd?

  Looking forward to any help you guys can give

  Hello

  Of course you need a compatible HARD drive.
  There are two different standards of HARD drive. SATA and IDE

  You need the HARD drive with the SATA interface. I think the original HARD drive was 100 GB.
  So a 120 GB and maybe a 160 GB SATA HDD should also be compatible.

  As far as I know the HARD drive slot was placed at the bottom of the unit and a screw secures the plastic cover.
  It of really not difficult to replace the HARD drive and I think that the details could be found in the user manual.

  Good bye

• Cannot install driver Equium A100 - 147 LAN (ethernet)

  Hello

  I have the same problem, as in the http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=17316 section.

  I downloaded and installed all the drivers that I needed on my Equium A100-147, but not working no driver Lan (ethernet).

  I have windows XP, home edition, SP2.

  I tried both types of drivers Toshiba download (and a few others also), that should work... but unfortunately, it does not.

  I'd be happy if someone could help me. Thanks anyway.

  Adam.

  Hello Adam

  Thanks for the feed back, but I must say that I'm really confused why you have problem to facilities with driver on Toshiba download page. In any case, the problem is solved and that's the most important thing! ;)

• Equium A100-147 has infrared device?

  I'm having Toshiba Equium A100-147 [00800 EAV] PSAABE... is device a infrared?
  What is the corresponding driver for it? How to activate this device?

  Please help me!

  Can you see the infrared sensor on your laptop?
  According to the specifications of the laptop your Equium doesn t have the infrared device.