Equium A100-147: Sonic recorder blocked under Vista

Similar Questions

• Equium A100-147: cannot install Vista because of startup configuration problem

  Equium A100-147 (Windows MCE) bought compatible Vista and bought my promised copy of Vista... used Toshiba step by step DVD ROM upgrade and also updated the Bios.

  Tried to load Vista Home Premium and after going through all the steps, it came with this message...
  «Could not update the computer startup configuration - installation cannot go ahead «...»»

  How should I proceed and what is useful to load Vista.
  Thanks in advance for any help.
  Considers that Howard.

  Hello

  How have you tried to install vista on the laptop?
  Have you tried to switch the MCE to Vista or were you running the new clean install of Vista?

  In my opinion, you must perform a clean installation. Don t updated the existing MCE of Vista.
  In such cases, you can join different installation problems

  If you are an owner of an original MS windows XP CD try to run the console of your windows XP CD recovery.
  Demarrer start from the CD at startup, and then press R to access the recovery console after loading the driver.

  In the recovery console, typefixbootand then restart your laptop.
  Then insert your Vista installation and restart.

  This should solve your problem.

• Equium A100-147: record now and Roxio can't find Recorder

  Equium A100-147 with Sonic, 'Save now' 7 worm, using gives 'NO recorder' and can not find the drive. If no records. I checked the box 'Save' in the properties for the drive but no joy. Also I tried Roxio software but it was also unable to find the drive.

  All of the suggestions.
  See you soon.

  Please check in Device Manager if the cd/dvd drive is correctly recognized.
  Additional if you can find the drive in the Device Manager, you could try to remove it and restart the laptop.
  After restarting the laptop should recognize the device again.
  Then you should check the functionality of the drive.

  I studied a bit on the site of Microsoft for similar problems and found a few interesting sites:
  http://support.Microsoft.com/kb/320553
  http://support.Microsoft.com/kb/314060/

  In my opinion, some registry entries are corrupted.

• Equium A100-147 - sound devices do not work correctly

  I've owned an Equium A100-147 for only less than a year.

  The problem I have is that if I put pressure on the area around the left speaker (where is the VGA port) there is a substantial "cracking" / rattling noise. The right does not exhibit this problem.

  The other day with a same case design (model Satellite A), I got another PC Toshiba laptop and it seems to have a slightly stiffer construction quality.

  Is it worth getting it checked under warranty while I still have the warranty? Or am I just too picky?

  See you soon

  Interestingly enough, why you support on the area around the speakers. As far as I know the speakers are placed between the keyboard and display and keyboard there is no pressure to the speakers. Very strange method to test the functionality of the laptop! ;)

  In any case, you should contact the service because the speaker should be placed and fixed correctly.

• Impossible to update the setting of DVD region on Equium A100-147

  Hi I have an Equium A100-147 with a CARPET * a DVD-RAM UJ - 841S and I am returning the dvd region 2 region.
  Tried to go through Win DVD, media player and the Manager of devices but not successful on all occasions.

  Whenever I thought I left a change of reference, but when I say yes I want to make the change, that is not the case.
  I tells me that I must use a region 2 media (do) and the administrator (this is me - I'm the only user).

  I now regret letting my nephew use the laptop for watching a region 1 dvd.
  Am not longer under warranty but have whateverhappens coverage of curries.

  Help, please!

  If you check the properties of ODD under DVD Region changes remaining how is noticed?

• Question on the disk anti-shock HARD on Equium A100-147

  Don't Equium A100 - 147 HDD have the same shock of the A120 series?

  Hello

  Sorry, but the Equium A120 is unclear to me. Where did you find information on this laptop and HARD shock anti-mecanisme disc?

  I found some info on the new feature called Toshiba EasyGuard.
  Protection of hard drive (HDD) a feature of Toshiba EasyGuard is designed not to damage the hard drive and disks of data caused by the shock, fall or vibration.
  This feature can be found in the device under the section manager system devices as driver of Toshiba HDD protection shock sensor.
  But unfortunately, I don t find anything similar on the Equium A100

• Equium A100-147: large screen display resolution is not available?

  Hi, I recently bought a laptop A100-147 - accepted a view model that I had trouble getting one of them. On the beautiful screen, the screen resolution is 1024 x 768 - that it and 640 x 480 and 800 x 600 are available. This sounds awfully stretched.

  Is this correct? Or do I have to create a different graphics driver that allows me to select a screen resolution?

  Thank you.

  Hello

  According to the description of the Equium A100-147 comes with color Wide XGA TFT 15.4 TruBrite display ". The standard resolution of this monitor is 1280 x 800. If you dot have this one please install graphic driver. You can find it on the download page of Toshiba under http://eu.computers.toshiba-europe.com support & downloads.

  I can't imagine that it happens after the first start. You have preinstalled your own operating system?

• Equium A100-147-glitch-pop-crack if the sound is muted

  Hello.

  I have an Equium A100-147 with Vista home Premium SP1 and 1 GB of RAM.

  Recently I get a glitch-pop-crack from time to time even if the audio output is cut.
  Have no idea what could be the cause?
  I'm more or less certain that everything is up-to-date.

  Thanks in advance.

  I never heard a question also and now I can t say what's the reason for this. :(

  You have the same problem on external speakers?
  What operating system do you use?

  Perhaps you need to update the audio driver you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good luck

• Equium A100-147 would not start

  Equium A100-147 would not start. Only the lights next to the CapsLock F10 F11 keys are on. When the switch is pushed the lights disappear back only after about 15 seconds.

  Help, please.

  Disconnect the power adapter and remove the battery. After doing this press the power for 30 seconds. Wait a few moments, connect the power adapter only and try to start your laptop.

  What happens when you do this?

• Equium A100-147 - deleted CD/DVD drive

  I uninstalled the readers of DVD/CD ROM of my Equium A100-147 model PSAABE by mistake. How I can I restore it? I'm not very technical

  Hello

  It means that your CD/DVD drive is not more?
  Have you already checked the Device Manager if the drive is visible or not?

  Otherwise, you must follow the instructions in this Microsoft KB article:
  http://support.Microsoft.com/kb/314060

• Equium A100-147: I get an error during the recovery procedure

  Hi again,

  I had trouble with my equium a100-147.
  I tried a restore, but the disc is scratched so I phoned in ESL and it snet me a new recovery image.

  I tried the new recovery disk and am now errors when I boot the disk.

  error is

  "internal error crc file: \WINDOWS\$NtUninstallKB895200$\msdtctm.dl.

  any suggestions are welcome. get really annoyed with my machine as my warranty expired only one month

  Thank you

  Hmm... I studied a bit and it looks a bit like a malfunction of the partition.
  It would be desirable to boot from the original CD of Microsoft XP and to start the repair console.
  Then you could try these various commands which help to repair the boot manager, repair errors, locate bad sectors and recover readable information.

  -fixboot
  -fixmbr
  -bootcfg /rebuild
  -chkdsk /r

  If this does not help, you should erase the entire partitions and must format the HARD drive in NTFS file system. Then access the BIOS and set it to the default value.
  Once this procedure tries to start again on the new recovery CD!

  Good bye

• Equium A100-147: need a new disc of restoration as mine has been a scratch

  Having a little trouble with my Equium a100-147.
  Tried a recovery from disk and I got up to 75% and recovery stopped.
  Taken to a computer shop to get it fixed and they couldn't do anything because they do not have a disc of recovery in good condition.

  Is there anywhere I can download the image to a different computer, put it on a dvd and restart from that one?

  Contact the ASP in your country and order the necessary CD

  Here you can find near the ASP in your country
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

• Equium A100-147 replacement hard drive

  Hello

  I got a toshiba Equium A100-147 by a friend. The only problem is that it comes without a hard drive, because he still destroyed his old hdd to protect its personal and professional data.

  I saw in a local computer store a disk sata hard very good price for only? Â £38 it's a 160 GB w Digital Scorpio 5400 RPM 8 MB Cache S - ATA HDD laptop someone knows if it will work or this laptop does it work-specific hdd?

  Looking forward to any help you guys can give

  Hello

  Of course you need a compatible HARD drive.
  There are two different standards of HARD drive. SATA and IDE

  You need the HARD drive with the SATA interface. I think the original HARD drive was 100 GB.
  So a 120 GB and maybe a 160 GB SATA HDD should also be compatible.

  As far as I know the HARD drive slot was placed at the bottom of the unit and a screw secures the plastic cover.
  It of really not difficult to replace the HARD drive and I think that the details could be found in the user manual.

  Good bye

• Cannot install driver Equium A100 - 147 LAN (ethernet)

  Hello

  I have the same problem, as in the http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=17316 section.

  I downloaded and installed all the drivers that I needed on my Equium A100-147, but not working no driver Lan (ethernet).

  I have windows XP, home edition, SP2.

  I tried both types of drivers Toshiba download (and a few others also), that should work... but unfortunately, it does not.

  I'd be happy if someone could help me. Thanks anyway.

  Adam.

  Hello Adam

  Thanks for the feed back, but I must say that I'm really confused why you have problem to facilities with driver on Toshiba download page. In any case, the problem is solved and that's the most important thing! ;)

• Equium A100-147 has infrared device?

  I'm having Toshiba Equium A100-147 [00800 EAV] PSAABE... is device a infrared?
  What is the corresponding driver for it? How to activate this device?

  Please help me!

  Can you see the infrared sensor on your laptop?
  According to the specifications of the laptop your Equium doesn t have the infrared device.