Equium A100-549 - mouse stopped working

Similar Questions

• PCI network on Equium A100-549 controller resource conflict

  I have an Equium A100-549 that stop to restart the computer with the error message:

  ERROR
  Resource conflict - PCI on motherboard network controller
  Bus: 02, device: 04, function: 00

  Press F1 to load the default values, F2 for Setup

  F1 just a loop to the same message, F2 brings up the configuration screens, but I see nothing here to fix this problem.

  There have not been any addition of material to the machine because it is out of the box from Toshiba.

  Any suggestions to get around this problem?

  I put t know what you did with your Equium and I advise you to install the OS by using recovery media delivered. After having this device will be updated again plant and equipment will be configured correctly.

  If the problem persists I would recommend you contact the after-sales Service of Toshiba partner and let check the device.

  By the way: close theme, you can see under http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=16271

• Equium A100-549: DVD & CD playback is slow and jerky

  Hello!
  DVD and CD playback is jerky and slow (sound and image). This problem occurred out of the blue! One day was playing very well and the next, when we tried to play a DVD is a different problem. I put the other DVD that plays very well the night before, but without success - it wasn't the DVD in particular. I tried the audio CD I played before and to my disappointment the same problem. I ripped a CD on my laptop and it played very well - it is not the sound card. I used a lens cleaner, but it did not work.

  I run Toshiba Diagnostics, no problem. I even scanned the HD and defrag, nothing - so I doubt there is a problem with Windows. Problem with two media players, windows one and the Nero one - is not due to lack of players. I drop the phone or hit him or spilled something on it. And this problem really happened from one day to the other. I had all the windows and driver updates two weeks before the problem occurred, by paying in the meantime several DVDs and a few CDs with no problems. What should I do?

  Fortunately, the laptop is still under warranty, but I would prefer if there is a way to fix at home, because services of take time...

  Laptop: Equium A100-549 CM360
  Windows XP
  Matsita DVD Ram UJ841S

  Thank you for your help.
  Vasilis

  Hello

  I hope that your device to factory settings and not your own installation of the OS. You didn't write what CDs and DVDs you use, but I hope that use you the original one.

  Before you play DVD movie try at first to end all unnecessary process and stop the antivirus application if you have one. RedHawk is just, but I'm sure that DMA setting is standard by factory settings.

• Equium A100-549: UK keyboard button game problem using OS language NL

  Hi all

  I have a bit of a problem, I can not solve my self.
  I have a toshiba Equium A100 549 and changed operating system from XP home to XP home NL UK.
  I did format all HARD disks because of Mayor virus problems.

  I reinstalled all the cd drivers Toshiba but stil some of the keys on the keyboard do not work good...
  I noticed that some of the keys are on different locations like on a Dutch keyboard.

  I woul want to set them like they belong on the way in which toshiba set them, with the same 3min.from on the keys...

  What do I do? Thanks in advance,

  Michel Hoff,
  Holland

  > I reinstalled all the cd drivers Toshiba but stil some of the keys on the keyboard do not work good...
  > I noticed that some of the keys are on different locations like on a Dutch keyboard.

  The point is that you have installed windows OS in the language of the Netherlands, but the laptop uses the UK keyboard layout.
  Therefore, change to a different language keyboard layout if the keyboard is set to the language of the Netherlands, then you should change this to English UK!

  Go to control panel-> regional and Language Options-> languages-> text services and input languages tab, click details

  There you can add or change the language

• Equium A100-549 - reading disc error occurred press ctrl + alt + delete to restart

  Hello

  I have a laptop Toshiba Equium a100-549, about 3 years, Windows XP Home Edition.
  Everything worked very well so far. When starting my computer, I received the message:

  A disk read error occurred press ctrl + alt + delete
  I don't want to lose my data

  Please please I need some advice what to do

  Kind regards
  AGM

  > I don't want to lose my data

  Well. Everyone knows that a HARD disk problem can happen and all of a sudden you may lose all the data stored on the HARD drive.
  That is why it s always recommended to backup the data on additional HDD, DVD, etc.

  I'm not sure if this will help but try this:
  Try to boot from the disk Win XP (NOT the Toshiba Recovery disk) and press r. means repair and should start the repair console.
  The similar DOS window should open and there, you can use a command:
  CHKDSK drive/p/r

  The chkdsk command checks the specified drive and repairs or recovers the drive if the drive requires it.

  More details can be found here:
  http://support.Microsoft.com/kb/314058

  If that does not help, then you need to reinstall new OS.

• Equium A100-549 4 GB memory?

  Hello

  I have a Tosh Equium A100 - 549 (PSAA4E). It's getting a little old now, but still a good machine, I've read various reports on what is max memory to this laptop.

  I bought 2 x 2 GB 200 pin SODIMM PC2-5300 (667), but when I install the laptop does not start. I get the power and keyboard LED and the fan but not the screen output.

  If I mix a former modules with a new 2 GB 512 MB (in order any Bank) then the laptop works, even if I get only 1.87 GB display in XP Home Ed.

  Took me to update to the latest version of the BIOS but still the same thing.

  Is it more a case of 2 GB not supported or is it the speed? I need 2 x 2 GB PC2 - 4200?

  Thanx

  Hi mate,

  the machine does not support the def. more than 2 GB of RAM. You must use no to 667 and 533 Mhz modules.

  That's all ;)

  Welcome them

• After update to 2 x 1 GB memory Equium A100-549 usually start

  Hello

  I use the Toshiba laptop with the following specs:
  Equium A100-549
  Part number: PSAA4E-00100MAV
  CPU: Processor Intel® Celeron® M 360
  OS: Windows® XP Home Edition
  HARD drive: 40 GB hard drive
  Memory: 1 024 (512 + 512) MB of RAM DDR2 2 x Samsung 512 MB 2Rx16 PC2-4200 s-444-12-A3 KR M470T6554CZ3 - C05

  Description of the problem:
  =================
  Laptop does not start after upgrading memory to the memory modules Ram 2 x 1 GB.
  I checked Toshiba support on the side of the specifications of my laptop (http://uk.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=UKPRODUCT_ID=11 3699)

  possible to update max, 2 x 1 GB Ram from 2 GB memory. I bought a new www.MrMemory.co.uk 2 x HYS242641GBQE 1 GB PC2-4200 SODIMM 64 x 16.

  Result after power is turned on with the new memory:
  ==================================
  CONDUIT of the TAB + F10, F11 buttons blink, it goes on twice after the laptop computer powers off.

  Test cross
  ========
  -try the module memory only one to start with.
  -tried to put memory on the second plug memory with new memory, cause
  problem persist buttons Flash until power off.
  -tried with a memory of Samsung and more a new module of memory together, computer laptop result begins, however he will show me properties 960 MB instead 1536 MB. Need help, please give me any suggestions or advise how to use the new memorys in 2 GB total.

  Thank you for your help in advance

  Kind regards

  Mesut

  Yes. It is possible to upgrade your Equium up to 2 GB, but you must use compatible memory modules.
  Module 1 GB compatible for your old Equium has PA3411U-1M1G part number.

  Check it out.

• Can I replace the graphics card on Equium A100-549

  Hi, I bought a game on Saturday, or a simulation game, I got one installed on my laptop.
  The game ran very slow so I removed the programs, a clip which I don't use pictures, one has tried it yet once one was still chance?

  I looked on the web one found that the game runs slowly on my card reader.

  Can I get a new graphics card for my laptop?

  The card I have is ATI RADEON XPRESS 200 M SERIES, one lap top is an Equium A100-549? can anyone help thanks chris

  No, the graphics card can be replaced on laptops.
  Especially the GPU chip is soldered on the motherboard.

  Welcome them

• The mouse stops working after a few minutes

  Original title: my USB mouse ch

  My mouse stops working after a few minutes. whenever I have uninstall and re - inserts into the usb port of the computer does not recognize it.what can I do?

  Hi Ann Juel,

  1. what happens when you connect the USB mouse to the computer? You get the error message?

  2. What is the brand and model of the computer?

  3. What is the brand and model of the mouse?

  4. What is the operating system installed on the computer?

  We will analyze and identify the cause of the problem.

  Method 1:
  

  You can connect the mouse to another computer and check. Also perform the methods provided.

  Also, try a different USB port and check.

  Method 2:

  Try to run the hardware troubleshooter and check what the problem is and fix it accordingly.

  Follow the link below a convenience store opened.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 3:

  Check whether all settings in the mouse properties are correct or try to change the mouse settings and if it works.

  Change the settings of the mouse
  http://Windows.Microsoft.com/en-us/Windows7/change-mouse-settings

  Hope this information helps. Response with status so that we can help you.

• Wireless mouse stop working

  my wireless mouse stop working.

  OT: device

  Hello

  1. what operating system is installed on the computer?
  2. don't you make changes to the computer before the show?
  3. What is the brand and model of the mouse?

  I suggest you try the steps from the following link:

  Mouse, touchpad and keyboard with Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

• My wireless mouse stop working

  My wireless mouse stop working... any suggestions? I put a new battery in it and it still does not work?

  Hi Glenna,

  Try a classic USB mouse to confirm that this isn't your system programs related to the mouse.

  Try using different USB ports in order to check that it is not a problem with that specific port.

  Try the mouse wireless on another computer to see if she's working.  That should help tell if the problem is with the mouse or with the computer.

  If it came with the software, firmware and drivers, try to reboot to see if that solves the problem.

  If she just started recently, try a system restore to a point in time before that the problem started.  If you use Windows 7, see:http://www.sevenforums.com/tutorials/700-system-restore.html. If you are using Vista, see:http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/. If you are using XP, see:http://www.bleepingcomputer.com/tutorials/tutorial56.html.

  If the mouse doesn't work no matter what you try (on any computer), then chances are it is defective and must be replaced.  If it works on other computers, but not on this computer, then further efforts will be necessary to try to track down the problem.  If the above does not resolve the problem, after return with the results of what you have tried and what version of Windows are you using and the manufacturer, brand and model number accurate and complete of the wireless mouse.  Then this thread will probably be moved to where it should be (this is for feeback on the forums, the issues not techniques on mouse problems) and the people in this forum will also offer assistance.

  I hope this helps.

  Good luck!

• Mouse stopped working, to error '(32 Rudll) windows host process has stopped working ".

  My intelli mouse stopped working and what I get is "(32 Rudll) windows host process has stopped working" what's happened?

  Hi Stevan I am,

   

  1. for how long have you been faced with this problem?

  2. did you of recent changes on the computer?
  3 do you mean the computer crashes when you get the error?

   

  Method 1:

  You can perform a scan of the SFC (System File Checker). It lists all the issues and will also retrieve all files if necessary. Follow the steps below to perform a Scan SFC -

  a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
  b. type the following command and press ENTER:
  sfc/scannow
  A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
  c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
  d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
  e. once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833

   

  Method 2:

  You can perform a clean boot and check if you are facing the same question to the clean boot. To perform the clean boot follow step 1 mentioned in the article below, and then try again check in the clean boot state -

  http://support.Microsoft.com/kb/929135

  If the problem is resolved check which service is causing the problem; referring to article and following the other steps.
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  a. Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  b. on the general tab, click the Normal startup option and then click OK.

  c. When you are prompted to restart the computer, click on restart.

   

  I hope this helps.

• Click on the mozilla firefox mouse stop working

  Click on the mozilla firefox mouse stop working

  http://forums.mozillazine.org/

• My mouse stops working after 30 minutes of inactivity. How can I fix this without having to reboot my PC?

  original title: MY MOUSE STOPS WORKING AFTER PC IS IDEAL for 30 minutes. How can I fix this without having to reboot my pc

  I hang the mouse up to the wrong computer

  Suggestions:

  1. If you use a wireless mouse, check the battery.

  2. use a different mouse and see if you have the same problem in the SAME conditions (idle for 30 minutes). If you have not, then your mouse may be defective.

• My usb mouse stopped working

  The problem is that my mouse usb (USB Microsoft IntelliMouse Explorer 3.0), has stopped working, the light is on but the cursor does not move it works when I restart my computer. I tried the other mice and after some time (can be 2 min, 1 h its random) the mouse stops working. I tried to use the other usb ports and it dosnt work, I tried the system restore, but the dates are after the onset of the problem. If anyone can help me, I would be grateful. And sry about my bad English, which is not my language.

  The only thing I found that worked the first time, every time (so far) is simply stop and UNPLUG your computer (for laptops... Disconnect the battery as well a few moments).

  With the machine on, the motherboard may still have activity.   This is what needs to be reset.

  Remove power, reboot and see if the mouse started working as you go through the screen "windows".

  Once logged on, it should pass the routine "found new hardware". This will solve the problem of "Unknown USB device" which is related to the mouse works do not.

  It could be useful!

  See you soon