Equium A100 (PSAAQ) network adapter problem

Similar Questions

• Drivers for ethenet Equium A100 (PSAAQ)

  Hello

  I installed Windows XP on my Equium A100 (PSAAQ)
  The problem is, after installing my computer don't think readers for Ethernet.

  I can't access the internet with the computer with LAN or wireless.

  Anyone who knows where I could find drivers?

  Thanks in advance
  Anders

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

• Equium A100 PSAAQ: Question about new update of the package of added value

  Equium A100 (PSAAQ) has received value-added information package download from toshiba, downloaded successfully, 3 provided separate files, zip files don't know which use as for the two buttons six buttons or without button machines, the question is which buttons do they refer to? so I know which file is correct for my machine, help please.

  Hi Andrew

  You should check this thread
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=25055

  It s on the same theme

• Equium A100-338 - battery power problem

  Hello

  My daughter has an Equium A100-338 bought England under Vista Home Premium 15 months ago. He has recently developed a problem with the battery life, which in theory should mean the replacement of the battery, but I'm not so sure!

  The battery quickly descends to say 80% 6 minutes remaining, about 20 minutes after a full charge. Then put it in charge that it retrieves to 100% in about 20 minutes. The notebook gets rather warm below, but I think it's probably normal, that old equium of my other daughter gets warm anyway.

  Someone has encountered this problem, or is it just that he needs a new battery? I would have thought that it would have lasted longer, the other Equium battery is still going strong and is one year more!

  Thank you
  Dave

  Hello

  Hmm I think that you battery is not dead and can be used much longer than you think.

  I see that you have Vista on your laptop. This OS needs more resources for laptop as the Win XP for example. This would mean that laptops preinstalled Vista would be shorter on the battery as the laptop with Windows XP.

  Finally, and especially the battery working time is highly dependent on the use of the laptop.
  If you play games or watch movies DVD battery discharges faster.

  Concerning

• Satellite P15-8409, Atheros wireless network adapter problem

  Hello. I'm having a frustrating problem with an old laptop Satellite P15. I restored the phone to default settings using the recovery disk that the system was working very badly. After that, the wireless network adapter has stopped working. In the Device Manager "Atheros AR5001X + Wireless Network Adapter" is marked with a yellow exclamation point. In the menu properties, under general, the State of the device the following is listed:

  The device cannot find enough free resources that it can use (code 12)

  The operating system is Windows XP Home Edition. The same problem has been present in SP1, SP2 and SP3. I also updated the BIOS to V2, but it also did not help.

  At work, we use a wireless internet connection. At home, I have a DSL connection. Curiously, when I plugged the network cable to the House, the yellow exclamation mark disappeared and a wireless connection icon appeared in the network connections window. I assumed that the problem has been resolved by updating to Windows; However when I brought the computer in the office, the wireless adapter was once more in the State I described.

  I searched the internet for the same problem, but was unable to find anything. I would be very happy to help.

  all the best,

  James

  BIOS version is installed on your machine? And you have you recently changed some hardware etc...?

  I don't know what it could be, but in the worst cases, the wlan card has certain shortcomings. You can check this by getting somewhere such an atheros wlan card or intel and install it instead of the one installed.

  Maybe the exchange of cards should solve this problem?

  Welcome them

• DVD - RAM on my Equium A100 (PSAAQE) drive does not recognize CD - R discs

  I just installed XP Pro on my tosh equium a100 provided vista as it ran very slowly and I had endless problems.

  All works well outside the DVD RAM drive, I got the correct driver from the toshiba support site and works in deivice managing all the and correct, I installed nero and decided to burn a Music Office but nothing helps, after selecting tracks nero don't does not reckognize the player in the drop down list only CREATE ONE IMAGE was available?

  Can someone advise?

  Thanks in advance

  I should try the following steps:

  First, you must remove the drive from the Device Manager and restart the laptop. After you restart the operating system should recognize the new device (ODD) again.

  Then, open the registry and delete the upper and lower filters of the key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Then reboot again.

  Once these procedures please try again if the player works!

• Wireless network adapter problems

  I get problems with my wireless network card - when I lose connection troubleshoot them menu popup says there is a problem with no valid IP addresses and the adapter needs to be reset. This can happen several times a day - even if the adapter is then reset. Why is it so often when my partner on his mobile phone next to me and on the same network hub has no problem?

  Hi David,

  It would be possible that the installed on your computer wireless network adapter driver is outdated.

  You can try to update the wireless network card drivers by visiting the manufacturer's Web site and check if that helps.

  How can I troubleshoot network card?

  Please post the results of the proposed measures.

• Windows Vista network adapter problem

  Machine 1:

  VMWare Workstation 6.0.2 build 59824Host OS: Windows 2003 server Enterprise edition 5.2.3790 service pack 2 32-bit

  Machine 2

  VMWare Workstation 6.0.3 build 80004

  host operating system: Windows 2003 server Enterprise edition 5.2.3790 service pack 2 32-bit

  I created a virtual machine in Vista Business on the Machine 1.  After creating and testing the image, it is copied on Machine 2 for use by another group.  When the image of Vista is started on the 2 Machine, the windows inside the image network adapter is disappearing and Vista requires the user to configure "Network 2".  Copy the image to the Machine 1 does not cause a new adapter to create, instead, the Image is turned down for the originial Windwos «Network» network adapter

  The only difference in hardware between the above two machines has an Intel 2 GHz Xeon model 5130 (Machine 2) and the other has an Intel Xeon 2.33 GHz model 5140 (Machine 1).  I can provide more information, if necessary, as I'm not even sure what type of information can be useful to all.  Thank you.

  Brian block

  EMC

  Hi Brian,.

  Clone the VM from Vista and then copy content cloned in VMware workstation 6.0.3

  I tested and it works

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!!!

  Prakash

• upgrade to esxi 5.0 on x3650m3s with NETWORK adapter problems

  I have a 3 host cluster that I'm trying to level. Update Manager has been delay on clean up the hosts so I plugged an ISO bootable USB to the machine. He went through his sequence start-up and ISO. It passes through and starts installing ESXi allows at the end where it installs "nfsclient" and then begins on an error: there was a problem with the device network specified on the command line. Error: No NIC MAC address found: XX. The address that it is is the FCoE QLogic card installed. It's the card that was running 4.1 traffic without problem.

  The card itself is fine and even visible in the form of map in UEFI system information.

  Has anyone seen this?

  Qlogic 10 Gb CNA adapter for x3650M3 (1800-42) requires driver qlge - 1.0.0.47 for ESXi 5.0.  It is in the compatibility guide.

  Search for IBM 42 1800 in VMware of HCL part number: http://www.vmware.com/go/hcl

  If you're ready to do a new install of ESXi 5.0 instead of upgrading, you can also use the ISO ESXi 5.0 cumulative hotfix driver 2 to get this driver installed during installation.

  ESXi 5.0 driver Rollup 2: http://downloads.vmware.com/d/details/rollupiso_50_2/dHRAYndlZEBiZHAlJQ==

  The release notes for that ISO contain a list of drivers included with it, which is qlge1.0.0.47.

• NETWORK ADAPTER PROBLEMS, POSSIBLY CAUSED BY UPDATE VISTA - is SPIRITX there?

  My problem seems to be identical to a previous poster:

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/f0871a34-680C-4607-9a88-8cefffe53a95

  My laptop worked fine. Reboot to sleep this AM and cannot connect to the internet (i.e. network hardware doesn't work properly). It may be a windows update (I'm on Vista 32 bit).

  I too have the same error messages (to ensure that IP connections are checked (they are) or it is a hardware/driver). There is no fault of network - I have two other computers accessing the internet via my WiFi OK.

  I tried the solution posted by SPIRITX but I don't know what network devices that you want to uninstall. I don't have listed NETWORK or WIFI card. I have the following:

  Intel (r) PRO/Wireless 3945ABG Network Connection
  Intel (r) PRO/Wireless 3945ABG Network Connection - WinpkFilter Miniport
  Marvell Yukon 88E8039 PCI-E Fast Ethernet Controller
  Marvell Yukon 88E8039 PCI-E Fast Ethernet Controller - Miniport WinpkFilter
  Miniport Wan (IP) - Miniport of WinpkFilter
  Wide area network (IPv6) - WinpkFilter Miniport WAN Miniport
  Miniport Wan (Network Monitor) - Miniport of WinpkFilter

  NOTE: These adapters with the '-Miniport WinpkFilter' entry are the problem those apparently showing an exclamation mark next to them.
   
  I tried restoring but it does not work.

  SPIRITX posted the following solution to the original problem, but uninstall that my list of network cards?

  You can try these:

  Panel of configuration-Device Manager - network - right CLICK on the TWO network (NIC) cards and WiFi in turn
  to UNINSTALL - after that the two have gone - RESTART rebuild your piles of pilot.

  Then - close all regular programs

  Start command - in the search box type-

  at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN

  Type the following commands (or copy and paste one at a time), each followed by pressing on enter.

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  RESET

  That resets your TCP/IP stack

  Maybe SPIRTX is out there in the ether somewhere and can offer advice.

  No further response received, but does not solve the problem, so to help others...

  I went to:

  Network and sharing Center

  Network connections

  r / clicked on WiFi network

  Properties

  unchecked and uninstalled the WinpkFilter Miniport drivers in this list.

  Restarted

  It seemed to do. The uninstals worked from here rather than by the Device Manager - don't ask me why. I am also doing this from memory so I hope I have listed all the steps - maybe the pro was able to confirm.

  tested with a ping from google from the command line

  then connected to my network as usual that connected OK.

  He did dirty upo my Norton 360 I had to reinstall it again, but it worked OK.

  Initially, I have a problem that I caused by a virus Norton had found and quarantined on my PC which coincided with the problem, but I do not know now.

  I hope this helps someone else.

  I can't add anything else I fear then good luck.

• Windows Update/network adapter problems?

  I have a Dell Inspiron Duo which is running Windows 8 Pro ('not supported' by Dell for this model). Very well, everything seems to work until about a week before, when I installed an update (I think KB2792100 or KB2797052), and now my laptop cannot find or connect to any wired or wireless networks. The icon on the taskbar displays bars signal grayed out with an 'X' red on them, and when you pass the mouse over it, it says, "not connected - no connection is available. I did a system restore, that uninstalled software more recently installed, as I expect to, but network problems remained. Windows Network Diagnostics has been as useful as ever (he did nothing), and tries to install a driver Windows 7 led to the BSOD and an other-system restore. Can anyone help? I miss the Internet :'(

  Hi Magikarpet,

  It can be upsetting when the network connection fails to run after an update. You can try to install a driver Windows 7 in Compatibility Mode and check if the network is enabled. You can download the Windows 7 drivers from the following link by punching in the serial number:
  http://Dell.to/QjjZDA

  Please follow the steps below to install the drivers in compatibility mode:

  1. right click on the program icon and choose Properties.
  2 when appears in the Properties dialog box, click the Compatibility tab, and then click Run Compatibility convenience store.
  3. in Compatibility Mode section, select run this program in Compatibility Mode for box and select the Windows version of the program you want in the drop-down list.
  4. click on OK and then run the file again.

  Let me know the status.

• Equium A100 - 549 Touchpad / pointer problem

  Greetings

  I'm having a problem with the computer laptop girls :(

  When you start the lappy up to 60% of the time once the desktop and its loading bits in the lower right the right pointer disappears and we cannot do anything with the machine outside turn off using the power button.

  If we continue trying to start the machine, eventually it will work normally. It's just like a random event: S

  I have been through the forums and the FAQ etc, I have uninstalled and reinstalled the drivers touchpad etc and tried some of the corrections mentioned on these forums, but nothing seems to solve the problem, for example the bios, chipset drivers...

  Wouldn't be a windows problem?
  Is it worth taking the time to go through the process of running a start-up in minimal mode and looking for a service does not, or reinstall a full windows? or is it something that I didn't think?

  Any help and ideas would be fantastic thanks :)

  You can start a computer laptop in SafeMode (F8 at startup) and check if there is the same problem with the touchpad and pointer?

• 6196ep: network adapter problem 1GbE

  Hello

  I have a HP dv6-6196ep wich im a moment difficult to know why he won't connect with 1GbE instead of 100 Mbps.

  I use the right cable which is "Cable cat 6 UTP 24AWG 4PR" and its connected on the single GbE router port.

  I tried to change some parameters such as, auto-nego and select "1 GbE full duplex", but it only connects at 100 Mbps, update the device controller, disabled the Frother, disable IPV6... and always connects at 100 Mbps.

  I tried the same cable with the same router port GbE on a diferent labtop and it immediately connects to 1 GbE.

  Any ideas? I would aprecciate any help since im paying the ISP for the speed and the labtop brings GbE card!

  Best regards

  André Henriques

  Hello D5GR,

  I just found that it was a hardware problem:

  

  I put in position, and now it works fine!

  Best regards

  André Henriques

• Where can I download an Equium A100 PSAAQ Audio output device?

  I accidentally disabled the audio device on my computer (thinking I would get the option to activate it again...) and now I have no audio output device so there is no sound.
  It's REALLY frustrating me!

  Does anyone know where I can download one or how can I get my sound back?
  I tried to download an audio device on this site, but it has not made a difference. heeeeeeeeeeeeeeeeelp!

  Thanks :)

  Can I ask you how have you disabled the output device Audio (I guess you mean the sound card)?

  Usually the devices can be enabled or disabled in Device Manager.
  Please access the Device Manager in the control panel and check if there is a yellow exclamation point. There is perhaps no yellow exclamation point, but the sound card is still disabled. Then mark it and activate it.

• Equium A100-338 has sound problems

  Hello
  Having already downloaded the drivers and had her for centuries, suddenly his party off I showed a yellow question mark on the realtek high definition audio, im now at a loss on what to do to solve I uninstalled and re installed but nothing works.
  Can anyone help please.

  Err, does his job before? I mean you have written you´ve downloaded the drivers and it still work doesn´t, then, have you downloaded the drivers because the sound no longer works?

  What operating system is on your computer? Would be interesting, maybe you need then the good drivers.

  I suggest you go on www.realtek.com and download there drivers for integrated sound card realtek high definition.

  Please give feedback on your success...

  See you soon