System hangs after connecting a USB device in Satellite A110

Similar Questions

• How to connect a USB printer to Satellite A110?

  Hello

  I have a problem with the installation of a printer (hp m1120) on my satellite A110 because when I connect to the printer, usb does not find it. What should I do to install this printer?

  thx for the help

  Hello

  just a silly question from me: fact you power on the printer when connecting to the machine? If YES, then try all USB ports on your computer and the printer must be turned on for the connection to the machine.

  If the system would not find then check if your USB ports work, simply by pasting a USB or something else in it. If the computer does not recognize the USB key, then your USB port works correctly. The consequence would be to check if the printer works.

  Connect the printer to a different computer (may be a computer of a friend) and check if it would be recognized. The printer must be turned on! When connecting to a computer, any computer. If it works then reconnect it to your laptop and check if a new hardware was found.

  Please give some feedback if it worked...

  Welcome them

• Portege M800 - the system hangs after connecting to fingerprint

  I just got my Portege M800 weeks ago and frankly speaking, this model has been giving me a lot of trouble. Earlier, it's heat problem in the palm rest and there is no solution for it.

  Now I am facing another problem with the connection of fingerprints. I'm running on Windows XP. I put the system must be locked after 5 minutes of inactivity. So normally after 5 minutes of inactivity, the system will have to be me to scan my fingerprint to open the windows. But there are moments which, after analysis of my fingerprints and put in correspondence with success, the screen will be just white (only show the desktop wallpaper). Not the desktop icons, no taskbar windows and nothing. Press Ctrl + Alt + Delete to bring up nothing and no answer even not a button. I tried to put the system to Hibernate by press the power button once as no response.

  So I have to finally press and hold the power button to reset the laptop.

  No matter which can help or give any idea of what was going on? Thank you!

  Hello

  I believe that these issues are in the past fixed with the new version of the fingerprint reader. Have you tried to install the latest version or you already have?

• Satellite M60-162: the system hangs after connection of SD card

  I at all, I have a problem when I insert an SD card in my toshiba, the system freezes. I try to install the drivers downloaded from the Toshiba site but the problem remains. The operating system is windows xp pro sp2.

  Any ideas?

  Hello

  What SD card did you use? Maybe the laptop doesn't support the format of SD card? Check the manual for the supported cards.
  Also, check the Device Manager. Check if the SD card controller is installed correctly. What you can do is to also update the SD card driver.

• XP hangs after connecting an external hard drive via USB port

  When I connect an external hard drive of 250GB via a USB port on my system XP - SP3, the computer crashes immediately after the sound signal from the recognition of a normal connection PnP. There is no assignment of the station. I don't know that he had worked as can be expected before. A new 500 GB external hard drive is recognized as new hardware, the driver installed and ready to use, but after that, the PC shuts down completely new. However, when I do a system startup after connection of the same two drives, everything looks OK. Also, no problem with a USB stick of 2 GB. How to find what's the problem?

  Well - it's Windows for you, sometimes. :/

  Good luck with your new installation!

• System hangs after upgrade to 'Windows 8 preview version' to 'Of Windows 8 preview with media center version' when connected to the Internet

  I use "Windows 8 preview version" for the last 4 months.

  I recently updated the system 'Windows 8 preview with media center version', but my system hangs after each start and restarts.
  It works only when I disconnect from an Internet connection. Once I connect to the internet, the system shows new blue screen. Now, I don't even have a system restore to go back to the previous configuration.
  I want to use internet on a system without the system get crashed, please help me solve this problem.
  I am using Dell Inspiron 15R

  The minidump files display a stop error message DPC_WATCHDOG_VIOLATION (133) referencing the netio.sys:

  BUCKET_ID: 0x133_DPC_NETIO! StreamInjectRequestsToStack

  The netio.sys is a Windows driver that is involved in the "networking."

  The process that crashes regularly is avgnsa.exe which is a process of AVG.

  I would say to uninstall AVG and see if the accidents to solve.

  He also seems to be a remnant of a previous installation of Trend Micro (tmtdi.sys) driver.

  If you had previously installed Trend Micro plan to run the following Trend Micro removal tool:

  http://esupport.trendmicro.com/pages/How-do-I-Remove-Old-or-New-versions-of-Trend-Micro-Products-in-My-COMP.aspx#.

  If you're running Windows 8 pre-release version of the software consider using just the built-in Windows and antivirus software firewall rather than any third-party antivirus or firewall software.

• Equium A100 stops or crashes when I connect a USB device

  I'm getting desperate now, but whenever I connect a USB device that is powered from my laptop IE sitting navi or mobile phone or ipod the thing just lock up or stops.
  All ideas will be very welcome; I checked issues of battery and made sure that my diet is in order but am at a loss!

  The same thing happens with all the USB ports? I also use several external devices using the USB ports, but everything works OK. Have you tested with USB?

  Your preinstalled laptop comes with a recovery image?

• ESXi 6 - unable to connect the USB device to VM

  Hi people:

  I have a problem with a specific USB 3 device to try to connect to a virtual computer.  The device is a Toshiba USB 3 5 TB hard drive, and it is recognized by ESXi I see when I do a lsusb command, but it is never offered as a choice available to connect to a virtual computer.  I tried to restart management agents, restart ESXi with the connected device so that it is immediately detected at startup.  I tried using the web client to vcenter server appliance and the native client C.  She just never appears as a choice just as if it is not there.  Other USB 3 devices, including a Startech gigabit network device and another 2 TB Toshiba USB drive appear as a choice, so it doesn't seem to be a problem with USB 3 devices as a whole.  I have connected to other computers and even an Arch Linux VM under the same ESXi which has a Startech USB 3 connected via PCI Passthrough controller and it works in all places.  I tried to connect to a USB 2 port just for the heck of it, and I got the same result (invisible to virtual machines) here is what information I have via the newspapers.  I see a few entries on the device being suspended in the vmkernel journal, but I don't know if it is normal for a device until it is assigned to a virtual computer.

  Any ideas what is wrong or how to fix welcome.

  lsusb

  lsusb [root@naplesesxi:/var/log] Bus 004 Device 011: ID 0480:d011 Toshiba America information. Systems, Inc.. Bus device 004 008: ID 0 b 95:1790 6 Electronics Corp. AX88179 Gigabit Ethernet Bus device 003 003: ID 2109:2811 Bus 004 Device 007: ID 2109:8110 Bus 002 Device 012: ID 1058:1003 Western Digital Technologies, Inc. Elements 1000 GB Bus 007 Device 002: ID 059b: 0277 Iomega Corp. Bus 004 Device 002: ID 0764:0501 Cyber Power System, Inc. CP1500 AVR UPS Bus 002 Device 003: Hub 4 ports ID Genesys Logic, Inc. 05e3:0610. Bus 004 Device 002: ID 0781:5583 SanDisk Corp. Bus 002 Device 002: ID 8087:0024 Intel Corp. integrated rate matching hub Bus 001 Device 002: ID 8087:0024 Intel Corp. integrated rate matching hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub [root@naplesesxi:/var/log]

  lsusb detail

  [root@naplesesxi:/var/log] lsusb - v d 0480:d011 Bus 004 Device 011: ID 0480:d011 Toshiba America information. Systems, Inc.. Device descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 0 (defined at the Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 9 idVendor 0 x 0480 Toshiba America information. Systems, Inc.. idProduct 0xd011 bcdDevice 6.07 iManufacturer 1 TOSHIBA

  iProduct 2 external USB 3.0

  iSerial 3 20140426016164

  bNumConfigurations 1

  Configuration descriptor:

  bLength 9

  bDescriptorType 2

  wTotalLength 44

  bNumInterfaces 1

  bConfigurationValue 1

  iConfiguration 0

  bmAttributes 0xc0

  Self-powered

  MaxPower 2mA

  The interface descriptor:

  bLength 9

  bDescriptorType 4

  bInterfaceNumber 0

  bAlternateSetting 0

  bNumEndpoints 2

  bInterfaceClass 8 Mass Storage

  bInterfaceSubClass 6 SCSI

  80 bulk bInterfaceProtocol only

  iInterface 0

  Endpoint descriptor:

  bLength 7

  bDescriptorType 5

  bEndpointAddress 0 x 81 EP 1 IN

  bmAttributes 2

  Transfer in bulk of Type

  Synch type none

  Usage Type data

  wMaxPacketSize 0 x 0400 1 1024 bytes

  bInterval 0

  bMaxBurst 14

  Endpoint descriptor:

  bLength 7

  bDescriptorType 5

  bEndpointAddress 0 x 02 EP 2 OUT

  bmAttributes 2

  Transfer in bulk of Type

  Synch type none

  Usage Type data

  wMaxPacketSize 0 x 0400 1 1024 bytes

  bInterval 0

  bMaxBurst 14

  Object store binary descriptor:

  bLength 5

  bDescriptorType 15

  wTotalLength 42

  bNumDeviceCaps 3

  Functionality of the USB 2.0 Extension device:

  bLength 7

  bDescriptorType 16

  bDevCapabilityType 2

  bmAttributes 0x00000002

  Link Power Management (LPM) taken in charge

  Feature of the superSpeed USB device:

  bLength 10

  bDescriptorType 16

  bDevCapabilityType 3

  bmAttributes 0x00

  wSpeedsSupported 0x000e

  Device can operate at full speed (12Mbps)

  Device can operate at high speed (480 Mbps)

  Device can operate at SuperSpeed (5Gbps)

  bFunctionalitySupport 1

  Fully functional low peripheral speed is Full Speed (12 Mbps)

  bU1DevExitLat 10 micro seconds

  bU2DevExitLat 2047 micro seconds

  Functionality of the device ID container:

  bLength 20

  bDescriptorType 16

  bDevCapabilityType 4

  Want 0

  ContainerID {14c4c0cc-6785-495d-8dcb-c74305d84121}

  Device status: 0x0001

  Self-powered

  [root@naplesesxi:/var/log]

  VMkernel when pluggin installed in drive

  2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb 4-4: new USB drive found, idVendor = 0480, idProduct = d011 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb 4-4: new USB device strings: Mfr = 1, product = 2, SerialNumber = 3 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb 4-4: product: external USB 3.0 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb 4-4: manufacturer: TOSHIBA 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb 4-4: serial number: 20140426016164 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > xhci_hcd 0000:00:14.0: Add ep 0x81, slot 12, new flags drop id = 0 x 0, add new flags = 0x8 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > xhci_hcd 0000:00:14.0: Add ep 0 x 2, location 12, new flags drop id = 0 x 0, add new flags = 0 x 18 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > xhci_hcd 0000:00:14.0: xhci_check_bandwidth called for udev 0x4302ab3e2bc0 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > xhci_hcd 0000:00:14.0: new context of input control: 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > xhci_hcd 0000:00:14.0: exit after config context successful ep cmd: 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb 4-4: name of the vendor: 0 x 0480, product: 0xd011, revision: 0 x 0607 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb 4-4: Interface subclass: 0x06, Protocol: 0 x 50 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) WARNING: LinScsiLLD: scsi_add_host:573: sgMaxEntries vmkAdapter (usb-storage) rounded up to 255. Indicated size was 65535 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) LinPCI: LinuxPCI_DeviceIsPAECapable:581: device capable of EAP at 0000:00:14.0

  2016-03 - T 02, 20: 04:23.337Z cpu5:33148) DMA: 646: DMA 'vmhba50' engine, created using the Mapper "DMANull."

  2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb-storage 4 - 4:1.0: interface is claimed by usb-storage

  2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb 4-4: device is not available for passthrough

  2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb 4-4: usbfs: registered usb040b

  2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > hub 4 - 0:1.0: suspended

  2016-03 - T 02, 20: 04:23.349Z cpu0:32819) ScsiNpiv: 1505: GetInfo for adapter vmhba50, [0x4301a7966240], max_vports = 0, vports_inuse = 0, linktype = 0, status = 0, failreason = 0, m = bad0020

  2016-03 - T 02, 20: 04:23.493Z cpu5:33105) < 6 > xhci_hcd 0000:00:14.0: xhci_hub_status_data: port polling station.

  2016-03 - T 02, 20: 04:25.340Z cpu5:33111) < 6 > usb3 usb: suspended

  2016-03 - T 02, 20: 04:25.340Z cpu5:33111) < 6 > usb3 usb: suspended

  2016-03 - T 02, 20: 04:34.056Z cpu6:33107) < 6 > usb-storage 4 - 4:1.0: suspended

  2016-03 - T 02, 20: 05:15.869Z cpu4:162661) < 6 usb transfer > disabled

  2016-03 - T 02, 20: 05:16.059Z cpu2:162686) VC: 3551: device rescan time 9 msec (total number of 5 devices)

  2016-03 - T 02, 20: 05:16.059Z cpu2:162686) VC: 3554: Filesystem probe time 13 msec (devices surveyed 3 out of 5)

  2016-03 - T 02, 20: 05:16.059Z cpu2:162686) VC: 3556: refresh the time open volume 1 msec

  2016-03 - T 02, 20: 05:16.150Z cpu1:162688) < 6 > usb transfer enabled; all eligible devices will be claimed by the kernel drivers

  2016-03 - T 02, 20: 05:16.235Z cpu6:162690) VC: 3551: device rescan time 8 msec (total number of 5 devices)

  2016-03 - T 02, 20: 05:16.235Z cpu6:162690) VC: 3554: Filesystem probe time 11 msec (devices surveyed 3 out of 5)

  2016-03 - T 02, 20: 05:16.235Z cpu6:162690) VC: 3556: refresh the time open volume 1 msec

  2016-03 - T 02, 20: 05:16.292Z cpu2:162691) ScsiScan: 836: vmhba0:C0:T0:L0 Path supports the REPORT LUN 0 x 11

  2016-03 - T 02, 20: 05:27.898Z cpu3:162776) CMMDS: CMMDSVSIUpdateNetworkCbk:2150: RECONFIGURE interface vmk3 with cmmds (success).

  2016-03 - T 02, 20: 05:27.921Z cpu3:162776) VC: 3551: device rescan time 9 msec (total number of 5 devices)

  2016-03 - T 02, 20: 05:27.921Z cpu3:162776) VC: 3554: Filesystem probe time 13 msec (devices surveyed 3 out of 5)

  2016-03 - T 02, 20: 05:27.921Z cpu3:162776) VC: 3556: refresh the time open volume 1 msec

  2016-03 - T 02, 20: 05:28.512Z cpu4:162776) Config: 680: "SIOControlFlag2" = 0, the old value: 0, (State: 0x0)

  2016-03 - T 02, 20: 05:32.679Z cpu0:162776) Config: 680: "VMOverheadGrowthLimit" = 4294967295, old value: 4294967295, (State: 0x0)

  2016-03 - T 02, 20: 05:34.612Z cpu6:162983) FixedMem TPM: start = 0xfed40000, end = 0xfed44fff, 0 = write protection

  2016-03 - T 02, 20: 05:46.397Z cpu7:162998 = 73 a 64522 opID) World: 15514: VC opID HB-SpecSync-host-9@0-3fda4c20-7-209f maps to vmkernel opID 73 a 64522

  2016-03 - T 02, 20: 05:46.397Z cpu7:162998 = 73 a 64522 opID) Config: 680: "HostLocalSwapDirEnabled" = 0, the old value: 0, (State: 0x0)

  2016-03 - T 02, 20: 06:00.897Z cpu3:162786 opID = 478d4c8) World: 15514: VC opID HB-SpecSync-host-9@0-799bbb99-81-212f maps to vmkernel opID 478d4c8

  2016-03 - T 02, 20: 06:00.897Z cpu3:162786 opID = 478d4c8) Config: 680: "HostLocalSwapDirEnabled" = 0, the old value: 0, (State: 0x0)

  Hi guys, I just had the same issue and it resolved on my test environment.

  I got the device ID using "lsusb".

  Bus 004 Device 002: ID 0480:d011 Toshiba America information. Systems, Inc..

  where 0480:d011 is the device ID

  Then ran the following command:

  oddities s esxcfg-module = 0480:d011:i usb-storage

  After a reboot I was able to cross the device for my VMs.

  I'm not an expert in this field, as far as I can understand of this thread: problem mit USB Passthrough (eine andere nicht, geht HDD) - to vSphere5 / ESXi 5.0 5.1 - VMware Forum und "usb-storage" module crashes when you try to access the drive and does not pass through to the arbitrator of the usb. The person in this thread turns off the usb storage but I boot from USB and so I couldn't do it. Steal the idea of this thread: zero calorie tech deals: VMFS formatted USB sticks in VMware vSphere 5.1 I could exclude the USB from the usb-storage module device (I think).

  I have not tested how this affects other features, but initial test is positive.

• Satellite A100 PSAA2E Setup hangs after connecting new HARD drive

  Hello

  I have a problem with TOSHIBA Satellite A100 PSAA2E (3 year old laptop)
  I bought the new SAMSUNG SPINPOINT 250 GB SATA (model HM250JI) hard drive.

  After connection, the computer hangs on the first screen. I can't access the BIOS Setup (press F2)
  I can't boot the CD of form (I can't select same drive to start by pressing F12)

  It just hangs.

  When the HARD drive is unplugged I can access the configuration of the BIOS or boot from CD. When the original hard drive (FUJITSU 40BG) is connected, everything is ok.

  I updated the BIOS to version 1.5 to the a more recent 2.6, but it did not help.

  HARD drive runs under windows xp, when connected by USB port. It is formatted with NTFS: a primary partition(15GB), a stretch with two logical partitions (20BG, GB 215).

  You have no idea where could be the problem?
  Should I format hard drive in a different way?

  BR,

  hosss

  Hello

  Check if your new HARD drive has been fitted with a small jumper that controls the master/slave/c-salt settings.

  A friend of mine bought a new HARD drive and BIOS didn't recognize because the rider has been set to the wrong position.

  Good bye

• USB connection for USB device failed

  Hello

  I have VMware Workstation 7.2 in Win 7 x 64 OS later.

  I want to use the USB-to-Serial Connector but my host OS cannot recognize the driver. This connector works with Win XP, so I don't think that there is a hardware failure.

  Then I tried running XP machine in VMware workstation, but when I map this USB on XP VM with message

  USB to USB Device "Composite Device" connection failed - driver error.

  Do I need to have a good driver on host to the USB VM card operating system? or the device! mark in the Device Manager in the host OS cannot be mapped to VM? or the USB device must be properly recognized by host operating system, as the device is suitable for USB Serial device not Composite?

  Any solution?

  Thank you

  It is a known problem in workstation 7

  in some cases this can be corrected - in most cases it cannot

  recommended workaround: use Workstation 6.5.5

• Connect menu USB devices does not appear in the view Client 4.0

  Hello world

  I am facing a problem with the display Client 4.0, in some facilities does not display the menu to connect USB devices on the top of the Menu bar.

  This situation occurs in some computers that are running Windows Vista or Windows 7.

  Is that what someone has experienced this problem?

  I think it's a problem of display compatibility customer with some component installed on the operating system, but I have not identified which we.

  Any help, pls.

  Kind regards

  Carlos Luna

  You are right, that the view Client 4.0 does not install USB drivers on 64-bit computers.  64-bit is coming.

• Equium P200-1ED is capable of powering connected on USB devices?

  (1) possibly associated with my previous question - what is someone able to confirm if the Toshiba Equium P200-1ED is able to power external devices connected via its USB ports?

  (2) all 6 USB ports can supply simultaneously 6 external USB devices?

  What's wrong?

  Please notify.

  I assume you ask again for advice related to this issue:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=115026#115026

  To my knowledge, all USB ports supports the USB standard and provides 500mA.
  But sometimes a USB device requires more than 500 my and then you will have to use an external power supply for the USB device.

  Sometimes it s advisable to use a USB hub that supports clean power.

  (2) can all be used 6 USB ports to power simultaneously 6 external USB devices?
  As I said, the external USB devices possibly some 3rd would need more like 500mA and in this case, you must use an external power supply to USB devices.

  Good bye

• ADSL modem disconnects when I connect another USB device

  I access internet through an ADSL USB modem. If I'm connected to the internet and plug an another USB device, such as the docking station for my PPC or printer, the internet connection drops and I get an error indicating that the modem or another connection device can be used by another application, or there is an error and it takes several minutes and usually a couple of "made up" to get internet.

  Is this a problem with the management of USB or is this normal? All devices are plug n play and installed before this error. Usually, I connect the modem to the back and other equipment on the side.

  Hello

  It really looks like a USB power management issue.
  I found this very similar topic:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=17783&MessageID=65434

  Turning off power safe mode solves this problem.

• System hangs after installation of security.

  My Dell computer freezes.
  After the installation of Verizon's Internet security suite.
  I restarted and was ased by adobe acorbat to install a undate immediately.
  I did and rebooted again.
  Now when my office is ready, if I hit any key, the system hangs.
  Can I restore back a few days in "safe mode" may solve my problem?

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  Mick Murphy - Microsoft partner

• The system hangs after the installation of KB82286198 & KB980408

  system crashes after windows starts after windows update downloaded Security Update kb82286198 02/08/2010. problem solved after that I go into safe mode and uninstall the update even and reset manual download options. Same thing happened in April after Windows update kb980408.

  Hello
  
  Please cross check, the number of update must be Ko 2286198.
  
  This update will protect your system from a remote attacker unauthenticated to compromise your system and take control.
  
  For more information visit http://support.microsoft.com/kb/2286198
   
  You can try to download the update from the link below and install it clean in boot mode.
  
  http://www.Microsoft.com/downloads/en/results.aspx?pocId=&freetext=2286198&displaylang=en (select the update based on the operating system installed on your computer.)
  Put your boot system helps determine if third-party applications or startup items are causing the problem.
   
  Try the steps in step 1 in the article to put your computer in clean boot mode.
  http://support.Microsoft.com/kb/929135

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]