New Satellite U400 cannot use the Wlan in Vista

Similar Questions

• Satellite L500 - cannot activate the WLAN on FN + F8

  Hello to all users of Toshiba, Ii'm new to computers laptop Toshiba, this one beeing my 1st and iIhave a well-known problem, I read on the internet.

  I recently bought a Satellite L500-13W. It has Realtek Wifi and comes with Vista OS. I deleted Vista OS since I have the license to the retail of Windows 7 Professional and Windows 7 top intalled. All work well, Audio, video, everything outside the wireless card. I enabled from the BIOS and everything and yet when I press FN + F8 it does not activate. The drivers are properly installed, as Windows 7 brings the upgrade of drivers. He said that the card works fine, but it does not turn on and search for Wifi signals. The Orange of the WIFI led does illuminate not.

  If anyone has a solution for this problem, I would be very grateful. I don't know what can be the problem, the software or the hardware.

  Advice me please. Thank you.

  Hi Darius1990,

  > Drivers are properly installed, as Windows 7 brings upgrade drivers
  This means that you have installed the Windows update WIFI driver and no official site of Toshiba, right?
  Well, in this case, I would try the prétestées WLAN driver from Toshiba. So you can make sure that it s not a WLAN driver related problem. Just check the WLAN from Toshiba Portal:
  http://APS2.toshiba-tro.de/WLAN/

  Have you tested other FN keys combination?
  If they don t work too you must install the package of added value and utility to Support Flash Cards because these two tools to control the function FN key and are important to use them correctly.
  ?

• Satellite A300-22F - face recognition cannot use the webcam on Vista 64

  Hello everyone,

  I have a big problem with the recognition of face and my Windows Vista operating system tool.

  Yesterday I installed Windows Vista 64 bit on my new laptop Sat. A300-22F as him preinstalled
  version of Windows was only 32 and I've got 4gig of RAM.

  Thus, all the drivers are installed and everything works. The driver for the webcam with the webcam program works, too.
  But when I run the facial recognition tool, an error that the webcam cannot be initialized or that
  the webcam is in use and cannot be used with the program now.

  So, no program is using the webcam. The webcam works with other tools. And in the settings of the tool face
  are the webcam, but always available, without work.

  Someone at - it an idea?

  I have the drivers of webcam directly from Toshiba.

  Thank you.

  Greetings.

  Hello!

  Start you have programs that use the camera as Skpye or MSN?
  Check it!

  You are using the latest version of the tools and drivers Toshiba? Search on the Toshiba site for an update.
  In addition, I would try to update the BIOS. You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Re: Satellite U400 - cannot install the graphics driver

  On my Toshiba u400 new I could CONFIGURE on 3D and display color with the right software ATI, ATI Technologies.
  But now I lost the software and do not know what to do? I tried to install and download, but no sucsess me don't help please?

  Thank you.

  > PCI VEN_8086 & dev_2a42 & subsys_ff501179
  This information indicates that you have an Intel graphics card, so please don t try to install an ATI driver. You don t have an ATI graphics card!

  If you have uninstalled ATI graphic driver restart your PC and install the Intel graphics driver. If this is not possible, go to Device Manager > right click on the graphics card > update driver
  Then select the driver, and the driver will be installed.

  By the way: it might be better to use the disk recovery or HARD drive recovery. It takes a few minutes and then you have a new installation of Windows with all the drivers and tools but save your data first because the HARD drive will be erased.

• Satellite A300 - cannot use the CD/DVD drive

  Hello

  I have Satellite A300 and my DVD drive is not seen by Windows 7.

  I do not see in the Device Manager, and when I use the updates provided by TEMPRO, and on the site, it just won't update.
  When I opened the Toshiba Disc Creator, it gives me an error saying that it does not have any drive connected.

  See you soon.

  Hello

  You should try to remove the upper and lower filters in the Windows registry. So just follow this work around:
  http://support.Microsoft.com/kb/314060

  Another question: can boot you from this drive?

• Equium L40: After bad Bios update cannot use the WLan

  Hi there hope someone can help.

  I've updated the Bios as tempo toshiba said, but I have not read the last piece. Who was that it is not for mine which is the model L40.

  I have now tried to put the right pair, but he says he can't. As I'm putting that has an earlier date.

  My main problem now is that my wireless stopped working, it says its there and so to work, I put the switch on, but he can't find any networks he used to find approximately 4 in my area

  Do I have to restore my entire system :(?

  I'm really confused about your message because the European Toshiba page provides drivers and BIOS for one Equium L40 series m.
  I found 2 different versions of the BIOS for Equium L40; a BIOS for XP and a BIOS for Vista.

  In my opinion it of almost not possible to update the BIOS with the wrong version

  However, it you have updated and used the wrong BIOS, then you must contact the ASP to help

  But first, I recommend a check of the WLan configuration

• Satellite A210 - cannot use the recovery disk - error 20-DATA-048F

  I'm going to use the cause of recovery partition does not work my windows, and whenever I do it, it comes up with an error "20-DATA-048F.

  How can I fix my computer!

  Any help would be greatly appreciated.

  Have you tried to format the HARD disk until you try to use the recovery disk?
  Sometimes, I read in the forum that this may solve the problems with the recovery disk and so you can take the Windows XP disc or another tool that is able to format the drive.

  But after that, you have the Toshiba recovery disc. You are not able to use the HARD drive recovery feature.

• Don't load not satellite L550 - cannot use the AC adapter

  Hey guys I'm stuck.

  My L550-113 collapsed somehow load.

  He was supported very well now and then, sometimes stopped to load.

  When pluged AC the yellow control light lights up for a few seconds then Amber transforms into a yellow flashing.

  Tried to unplug and plug the AC adapter it did charge twice but now even that doesn't help.

  My main problem is that I can even use the device when it is pluged in...

  What should I do?

  Hello

  Remove the battery and unplug the AC adapter.
  Wait several hours and then connect the two parts and check if the laptop to charge again.
  If this isn't the case, then the adapter should be verified.
  If it s question no AC adapter (I guess that he isn t ac adapter related issue) then the motherboard of the laptop must be verified.
  I think that security is still available so get in touch with the local ASP in your country!
  Guys should help you.

  Welcome them

• new to photoshop, cannot use the brush on the layer?

  Hi, I have a photo im working on, which includes a part of another image as a layer above it... When I try to use the brush on the top layer, brush painted on the bottom. What I am doing wrong?

  Make sure you are on the layer you want to paint by clicking on it, and it will highlight. Other than that, make sure that you use the standard Brush tool.

• Satellite L450D - cannot use the product recovery disc

  Hello

  I'm new to this forum and have spent 3 days reading this and other forums to try to solve my problem, I found a lot of answers, but none does not work for me so I'd see if I could get the thought some very great need help here.

  Now, I have the problem that when I start the laptop the windows logo appears, then Microsoft corporation through the bottom and then the screen black with the cursor of Pentecost, I tried all possible starting in the bios settings and just goes back to this screen, I can t get no prompt or anything like that , I used knoppix and managed to transfer all the files I need from my external HARD drive, so thought I would not reset to factory settings with the recovery disk of the product supplied with the notebook, the disc never has been used or taken from the package until now is so in perfect condition of the art, so I put in the drive , start computer press f12 and make the primary boot CD, but all that happens is it says windows is loading files and get back to the dreaded black screen and a cursor.

  Can someone please help?

  If you have the original Toshiba Recovery disk I assume you have older model laptop with Windows XP Home edition old. To be honest, it would be interesting to know is you.

  In any case, out of curiosity but can only begin preinstalled OS in safe mode?
  Enter the BIOS settings and set its default value initially. After ding this change BIOS boot order and place the CD/DVD as first boot device. Put recovery media in the optical disc drive, and boot up your laptop. While the laptop tries to start C press several times.

  Usually, this should force your laptop to use ODD as the first boot device.
  Long ago, I had similar problem and such combination helped to force the ODD to read the recovery disk and Windows XP Home edition recovery facility. Of course, I hope that everything is OK with your HARD drive.

  Please test and send feedback.

• Satellite L850 - cannot use the FN (function) button to turn wireless on

  I have a Toshiba Satellite L850 PSKDLA-0D100R. My problem is what is stated in the subject. I tried to reinstall windows, that did not work, I tried everything I found concerning this problem on google and none of this helped then please help me! The 'flash cards' I think they are called do not come to the top when I press 'FN F12' to turn on without thread, even if they do not work when you adjust the brightness of the screen and the sound.

  Please help me!
  Thank you.

  Usually, this should work if you tried to reinstall the OS using original recovery image that you got with your laptop.

  Have you tried to reinstall Toshiba Value Package?

• Satellite M30: Cannot use the recovery CD - this isn't for my unit?

  Hello

  I have a toshiba am and when I tried the recoery cd, a prompt comes out saying that the recovery cd is only for toshiba M30... which is what I have!
  The cd came with the laptop and I've used it before without a problem.
  Can someone tell me what the problem with my laptop?

  Thank you.

  Hmm maybe the DMI contains the name of the laptop bad.
  In this case, recovery cannot be installed because the notebook believes the recovery for a laptop CD.

  In this case, you should ask the service point for the update of DMI

• Satellite M30. cannot use the internal modem

  If the modem to open I get the message: the port (com3) that the modem is connected cannot be opened etc.
  In the Device Manager I can not find a com3 port at all.
  The Device Manager shows the device (modem) to work properly but when I query the modem I get again the first message.
  The log file says: open the modem device failed with error 000005aa.
  Already, just re-installed and updated.
  Any suggestions

  You install Nokia pc suite? When I installed it, I had the same problems you describe. It blocks the port 3.

• Satellite L855 - cannot use the function keys after the Windows 8.1 upgrade

  Hi all,

  After I upgraded my pc Windows 8.1 I can't use special keys use without the FN key.
  In the Toshiba HW setup utility, I put the right option in the tab keybord.

  Can someone help me?

  Thank you

  Before we start discussion tell us please you have upgraded your machine following the instructions of the Toshiba support page?

• Re: Satellite L10: cannot use the USB after XP Home recovery

  After Systemrecovery with the toshiba CD-ROM and install all updates for xp, there is no chance to use usb on somthething else keys. XP said ' you must intsaller a pilot ", but I do not know whichdriver. I don't think that in 98 I intsaller a driver?

  (Sorry for my bad English, I learned 25 years ago in school)

  Post edited by: patty64de

  Hello

  USB 2.0 drivers are part of the service pack Ms.
  You must absolutely install MS all service packs. I recommend that you install SP2 and then all the updates Ms.

  Check the MS document:
  http://support.Microsoft.com/kb/329632

  In addition, you must install all drivers Toshiba from this site:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  There is a Chip Set Utility, which is very important.

  Best regards