Equium A210 - Diskpart error during recovery

Similar Questions

• Volume \Device\HarddiskVolumeShad... encountered an error during recovery

  Hi, I got this error in the event viewer:

  The resource transaction on \Device\HarddiskVolumeShad volume manager... has encountered an error during recovery.  The resource manager will continue recovery.

  Only from google, is your error? - http://www.eventid.net/display-eventid-134-source-Ntfs-eventno-10844-phase-1.htm

  If so, backup your data now and then a full disc check error may be trying to see if it finds problems

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  IF you can provide more information, including the number of the event real, are complete you any specific task when the event occurs etc, someone can be able to give more specific advice.

• Satellite A210 - error during recovery

  Hi all

  I received a Satellite A210 (opportunity, about two years old) by a friend. The laptop does not work at the moment. When the laptop is turned on, it displays a message "Missing Operating System". I tried using the recovery disk supplied with the machine, but it doesn't help. I get the same message "error restoring image."
  ERROR = ImageX would not apply VISTA F = \05853XSP.swm Index 2 of ODD to C =------! Press a key to continue, and it is as he goes. Currently a une machine machine second hand, that I don't know what works and what does not.

  Any ideas on where to go from here would be much appreciated.

  Hey Buddy,

  I never had an error message during the installation of recovery so I m not sure what the reason for this problem.

  Have you checked the BIOS? Is the drive recognized properly it?

  What happens if you try to install Windows from a Microsoft installation disc?

• Equium L40 - error during recovery

  I need to recover my Toshba Equium L40 running Vista.

  So I put in the disk that come with the laptop when I got it, he began to do what he needed to do, I have chosen the language and press next and then Next again, then a BACK screen appears and begins to do things, this only getts so far and then stops and appears with errors and then after a while it's just closes the window BACK. I try to start the computer laptop nornmally but now I can't do same.

  What can I do to fix this?

  I am confused with this choice of language. Language is not editable and you must leave just already marked language.
  Can you continue with the installation of recovery if nothing is changed?
  Do you use a recovery media for the first time?

• Satellite A300 - BIOS settings incorrect error during recovery

  Hello

  New to the forum, I had a search around so im hoping someone can help me.

  I have a Toshiba Satellite A300 PSAGCA and trying to resize a partition my computer become unresponsive and since then I can not load Windows Vista. When the computer starts it comes up with the error "interrupted operation: insert the Recovery CD.

  So I used the restore CD that was with my program of partition but I get a different error message saying "Incorrect BIOS settings change video buffer size" which I cannot find in the BIOS and no help from their support.

  If im now doing a Toshiba Recovery and restore my laptop, but I can't get into recovery. Holding F8 during startup to show the boot advanced options, or not taking '0' as ive read its supposed to.

  Any help would be appreciated!

  Thank you

  Can you please tell me how you tried to resize the partition?

• Satellite 2430-402: 437 Application error during recovery

  Right, I've got a Toshiba Satellite 2430-402 (purchased new) for at least 3 years. I have formated several times before and re-loaded windows back on with no problems until now.

  The problem only started two days ago, when I noticed my CD drive was not recognized. So I decided to format etc, came out the disk Recovery Utility that came only with the computer to install everything, and it will not go beyond 12%. I'm greeted by * Application error 437
  Can not read the file.

  I left really stuck and cannot load anything. I fdisc / formatted /spinrite / kill the hard disk, just in case where there is something nasty on here and can still get nowhere. This is the first time I'm really stuck.

  This could be the engraver of CD or would it be the hard drive or basically the computer is nakered. I inspected the recovery disk, and they are all clean!

  Or is it because I made an update of the bios (you mind, it was weeks ago)

  Everyone please

  Thanks in advance

  Hello

  to my knowledge, the Ghost image files are placed on the Toshiba Recovery CD.
  That's why I studied on the ghosts manufacturing Web site.
  It s Symantec and found this information site:

  HM http://Service1.Symantec.com/support/Ghost.nsf/0/14579a4173691f8988256abf005f4f8f?OpenDocument&SEG= & lg = fr & ct = us

  According to this page this problem seems to be due to starting the computer incorrectly when you use Ghost with GoBack on the computer.
  This problem may also occur when you use a brand or type of CD that works well with your CD - R or CD - RW device. In this case, Windows or DOS might be able to read the information on the CD that other applications cannot.

• Error during recovery on Qosmio G30

  Hello

  I'm trying to recovery my Toshiba Qosmio G30 computer laptop (PQG31A). At the end of the restore process (15 seconds to finish), I get an error code 10E7160017 and instructions click OK to shut down the computer.
  I put the boot on CD/DVD first sequence (before that I didn't that I loaded the recovery CD now button 'C' and the same error came in halfway through the installation).

  My BIOS version is 1.4. I tried to install latest BIOS (v 3.60) last, but the program downloaded from the toshiba Web site States that my computer is not supported.

  Any ideas? Help, please!

  Thank you

  Nick

  Hello

  I Fund this thread on the message error 10e7160017
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=22596

  A guy, he fixed by updating to the latest version of the BIOS and turning off the power and hard drive passwords.

  About you update the BIOS;
  You must first select the G30 series right from the page of European driver of Toshiba.
  I checked the page and there are various series G30. So choose the right ;)

  Bye and good luck

• error during recovery

  I put the recovery in the mobile disk, after he asked for all discs and copies all the files on the hard drive, it resstarts, but it says at the beginning of the process "a file unmaed is not found."

  the error is so little clear, what should I do?

  I have 3190ee dv6, it is the recovery of 64-bit windows 7, I totally formatted the HARD drive and remove all partitions, including the recovery (after he gave me the error I installed ubuntu linux, so the recovery partition was in good health when he gave me the error)

  Hello

  It seems that your laptop comes with Windows 7 Home Premium 64-bit, so it will be the commercial version, you need to borrow.

  Kind regards

  DP - K

• laptop G62-b98ED: 0xe0f00013 during recovery (new hard drive) error code

  In the HP Support Forum Iread the code 0xe0f00013 error during recovery (new hard drive).

  In this article, I go the Digital River en download Windows 7 Home site (http://msft.digitalrivercontent.net/win/X17-58997.iso)

  Unfortunately, this link is broken

  ("The Page or file you requested cannot be provided

  The resource you are looking for has been removed, had its name changed, or is temporarily unavailable.
  Error HTTP 404 - file or directory not found. »)

  In ths page I be called Micrrosoft to download on their site. After typing the registrationkey it says:

  'Product not supported '.
  The product key you have entered seems to be the software that was preinstalled on a device. Contact the manufacturer of the software device for recovery options. " »

  You have a different link to download the ISO of windows 7 Home Premium?

  I have not personally used this download link, but they seem to have good answers/responses from users it and 33K followers on Facebook.

  http://getintopc.com/softwares/operating-systems/Windows-7-Home-Premium-free-download-ISO-32-bit-64-bit/

• Equium A210 starts with error - PXE - E61 Media test failure

  Trying to help a friend that we think that the laptop has been damaged by the virus Exploit.Drop.G... All I could think and decided as a last resort to execute tried suggested wipe drive. This succeeded and I thought I'd be able to reinstall Vista from the disc, but I get the above error message. The laptop is a Toshiba Equium A210-1VO (model PSAF5E-001005KS number).

  I noticed once before when using this laptop CD/DVD could not play DVD I tried all tips disassembling upper and lower filters etc, but could not solve this problem (which was pre virus). When I boot on utilities system that she admit HDD like Hitachi-(S1), optical disc drive: TSSTcorpCD/DVGW TS-L632D, and says total memory 2048 MB system BIOS version 1.60.

  Totally stuck now, any advice/help would be much appreciated.

  I think for some reason any HDD is not recognized as a boot device.
  Start your laptop and press F12 repeatedly to enter the boot options.
  He put original recovery disk or the ODD Microsoft installation disk when startup options are displayed on the screen.
  Choose the CD/DVD as a boot device and press ENTER.

  What happens when you do this?

  A few days ago, I had a similar question about friends A300. HARD drive was defective. After Exchange of HARD drive, I was able to install Win.

• Equium A210 - error - operating system not found

  Hi guys

  I'm new on this Yes, you can be sweet. I have an Equium A210, 2 years old.
  Everything was fine until today when it goes off.

  I thought that it might overheat because he felt hot so cool.
  When I turned it back I get the error "Operating system"... not found This is accompanied by a constant clicking noise coming from under the laptop!

  Any ideas anyone?

  Thank you very much

  This error is known to me.
  I had too!

  It appeared after the death of my HARD drive.

  I think the BIOS does not recognize the HARD drive and therefore the operating system is not found.

  To me, it seems that you need to replace the HARD drive and then you could install the OS on the Toshiba recovery disc.

  Good bye

• STOP: c0000221 {Bad Image Checksum}. The image rpcrt.dll is possibly corrupt and recovery XP says error during the extraction process. Details of error: path not found___

  My friend turned on their laptop packard Bell recently and had the following problem. Windows XP screen loads but is then followed by a blue screen that says STOP: c0000221 {Bad Image Checksum}. The image rpcrt.dll is possibly corrupt. The header checksum does not match the checksum calculated.

  I can't the laptop to go further. I have accessed the Microsoft recovery Panel and try a non-destructive recovery as there are some precious photos that need backup. However, when you select 'no profile' to begin the recovery, I get the message:

  Error during the extraction process. Details of error: path not found

  I'm a bit of a novice when it comes to this sort of thing, but if someone can provide step by step help giving rise to lose photos, I'd be willing to give it a try. I also have XP Home Edition disk that came with the laptop but has never been opened. Any help would be appreciated. Thank you

  You hear your message said something about rpcrt4.dll?  It is important to relay the exact message you see.

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  You use some CD to access this Panel of Microsoft recovery where this "no profile" option is?  I don't know what all this means if it isn't some CD shipped with your system, in which case, I would use it for a coaster instead of something to fix your system.

  If the c:\windows\system32\rpcrt4.dll file is missing or afflicted, you do not start in the last good known Configuration.

  You also will not start in any kind of Mode safe no more.

  Even if you could boot mode safe, you would find that sfc/scannow does not work in Mode without failure in all cases (never).  If you try it, you'll see a message like this:

  Windows file protection could not initiate a scan of protected system files.

  The specific error code is 0x000006ba [the RPC server is unavailable.].

  Failed to start the RPC mode server safe either.

  I can't recreate your error exactly, but it is easy to replace the rpcrt4.dll file.  Looks like you have a working CD drive, so put yourself a Hiren boot CD and when you started on this, you can copy your precious files to a USB device for safety.

  There should be a backup copy of rpcrt4.dll already on your system, here or here:

  c:\Windows\System32\dllcache

  c:\windows\ServicePackFiles\i386

  You need to rename or replace the rpcrt4.dll file which is in c:\windows\system32 and replace it with one you will find the backup copies.

  There should be a backup copy of rpcrt4.dll already on your system, here or here:

  c:\Windows\System32\dllcache

  c:\windows\ServicePackFiles\i386

  When you get the Hiren's CD's, you can use to replace the missing or suspicious file.  If you need help with that, first get the Hiren's boot CD made and start over, then we can continue.

  Do you have a Hiren BootCD you can download here:

  http://www.hirensbootcd.NET/

  On the left, click on download, scroll down, choose the latest version, the download link is a little hard to see.  It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):

  Direct HTTP mirror + Torrent, Torrent Magnet

  Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.

  The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract the Hirens.BootCD.ISO file that will be used to create your new bootable CD.

  Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

  File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

  If you need a simple and CD burning, this is a free software popular software:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your new bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.

  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.

  Using the Mini XP, you can access Internet, maneuvering around your system, search for files, copy files, replace the files and run the scans for malware, edit the text files (like the c:\boot.ini) etc.

  There are dozens of free and useful tools included in the CD that can be used to repair your system or copy your important personal files on another device (like a USB device or an external drive) in the case where you just give up and decide to reinstall your XP (I hope that you will not make this decision)

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• RMAN recovery failed with the incarnation of target of error 03002,11003 and recovery 19906 changed during recovery

  Hi all

  I was cloning a Prod DB (Oracle 10.2.0.5) from tape backup. So the cloning is going on it failed with the below error in RMAN:

  archive log thread = 2 sequence 23044 = filename=+DG_zeus_FRA_01/zeus/archivelog/2014_05_23/thread_2_seq_23044.3558.848348137

  output channel: ch01

  output channel: ch02

  output channel: ch03

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of Db in dual at 23/05/2014 20:15:48

  RMAN-03015: an error has occurred in the script stored memory Script

  ORA-00283: cool cancelled due to errors

  RMAN-11003: failure in parsing / execution of the SQL statement: alter database recover logfile ' +DG_zeus_FRA_01/zeus/archivelog/2014_05_23/thread_2_seq_23044.3558.84

  8348137'

  ORA-00283: cool cancelled due to errors

  ORA-19906: embodiment of changed during recovery recovery targets

  Any possible solution to the resume and cloning complete successfully?

  Kind regards

  Ritu

  incarnation of the list;

  It listed 2 incarnation. I have reset the previous incarnation

  RESET DATABASE TO INCARNATION 2;

  and recovered again and it solved my problem.

  After that added temp files as usual after failing RMAN duplication;

  After this nest of DB and open reset logs.

• Equium A210-1as turns off during the Bios flash

  Hello group,

  My computer laptop girls off for a flash bios because of blocked fan (dog hairs dust etc.) and its fried bios chip.
  I think that there is a partition on the Bios chip which can upgrade the bios in a critical state of flash using combinations of keys.

  I tried all of this and have a laptop dead yet.
  I contacted someone on the net that sells preloaded Bios chips and instructions to replace them, but I must first of all identify the chip on the card.
  Is there any reading that can identify it for me on a toshiba Equium A210-1as... psafje-005005ks

  Thanks for any help Paul G...

  Hi mate

  Usually it s is not necessary to replace the BIOS ROM chip on the motherboard.
  In most cases, the ROM module has to be reflashed again.
  It seems that the module ROM was not properly flashed and the process interrupted
  The technician of the ASP can reflash the module using a disc of the BIOS crisis.

  I recommend you to get in touch with the guys from the ASP in your country and ask reflash BIOSES.

  Good luck

• My Equium A210 will not charge upward once it lights

  Hello
  Last night my Equium A210 17I turns off during use. Despite several attempts to reboot, it just does not start. When I turn it on I get the message "Windows is loading files". This continues for a few minutes, then the following information is displayed on the screen...

  * Windows cannot start. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your windows installation disc and restart your computer.
  2. choose your language settings, and then click "Next".
  3. click on "repair your computer".

  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.

  File: \Windows\system32\winload.exe

  Status: 0xc000000f

  Info: The selected entry could not be loaded because the application is missing or corrupt.*

  I never received an installation disc with my laptop I bought from PC World about 2 years ago. Can I buy one?

  I hope someone can help.

  Hello

  Hmm. maybe you didn t receive the recovery disk because the restore disc could be created using the preinstalled Toshiba recovery disc creator
  I guess you have never activated your user manual. I m right?

  In any case, perhaps you can order the CD from here:
  https://backupmedia.Toshiba.EU/landing.aspx

  Good luck