Error during recovery on Qosmio G30

Similar Questions

• Volume \Device\HarddiskVolumeShad... encountered an error during recovery

  Hi, I got this error in the event viewer:

  The resource transaction on \Device\HarddiskVolumeShad volume manager... has encountered an error during recovery.  The resource manager will continue recovery.

  Only from google, is your error? - http://www.eventid.net/display-eventid-134-source-Ntfs-eventno-10844-phase-1.htm

  If so, backup your data now and then a full disc check error may be trying to see if it finds problems

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  IF you can provide more information, including the number of the event real, are complete you any specific task when the event occurs etc, someone can be able to give more specific advice.

• Satellite A210 - error during recovery

  Hi all

  I received a Satellite A210 (opportunity, about two years old) by a friend. The laptop does not work at the moment. When the laptop is turned on, it displays a message "Missing Operating System". I tried using the recovery disk supplied with the machine, but it doesn't help. I get the same message "error restoring image."
  ERROR = ImageX would not apply VISTA F = \05853XSP.swm Index 2 of ODD to C =------! Press a key to continue, and it is as he goes. Currently a une machine machine second hand, that I don't know what works and what does not.

  Any ideas on where to go from here would be much appreciated.

  Hey Buddy,

  I never had an error message during the installation of recovery so I m not sure what the reason for this problem.

  Have you checked the BIOS? Is the drive recognized properly it?

  What happens if you try to install Windows from a Microsoft installation disc?

• Satellite A300 - BIOS settings incorrect error during recovery

  Hello

  New to the forum, I had a search around so im hoping someone can help me.

  I have a Toshiba Satellite A300 PSAGCA and trying to resize a partition my computer become unresponsive and since then I can not load Windows Vista. When the computer starts it comes up with the error "interrupted operation: insert the Recovery CD.

  So I used the restore CD that was with my program of partition but I get a different error message saying "Incorrect BIOS settings change video buffer size" which I cannot find in the BIOS and no help from their support.

  If im now doing a Toshiba Recovery and restore my laptop, but I can't get into recovery. Holding F8 during startup to show the boot advanced options, or not taking '0' as ive read its supposed to.

  Any help would be appreciated!

  Thank you

  Can you please tell me how you tried to resize the partition?

• Satellite 2430-402: 437 Application error during recovery

  Right, I've got a Toshiba Satellite 2430-402 (purchased new) for at least 3 years. I have formated several times before and re-loaded windows back on with no problems until now.

  The problem only started two days ago, when I noticed my CD drive was not recognized. So I decided to format etc, came out the disk Recovery Utility that came only with the computer to install everything, and it will not go beyond 12%. I'm greeted by * Application error 437
  Can not read the file.

  I left really stuck and cannot load anything. I fdisc / formatted /spinrite / kill the hard disk, just in case where there is something nasty on here and can still get nowhere. This is the first time I'm really stuck.

  This could be the engraver of CD or would it be the hard drive or basically the computer is nakered. I inspected the recovery disk, and they are all clean!

  Or is it because I made an update of the bios (you mind, it was weeks ago)

  Everyone please

  Thanks in advance

  Hello

  to my knowledge, the Ghost image files are placed on the Toshiba Recovery CD.
  That's why I studied on the ghosts manufacturing Web site.
  It s Symantec and found this information site:

  HM http://Service1.Symantec.com/support/Ghost.nsf/0/14579a4173691f8988256abf005f4f8f?OpenDocument&SEG= & lg = fr & ct = us

  According to this page this problem seems to be due to starting the computer incorrectly when you use Ghost with GoBack on the computer.
  This problem may also occur when you use a brand or type of CD that works well with your CD - R or CD - RW device. In this case, Windows or DOS might be able to read the information on the CD that other applications cannot.

• Equium L40 - error during recovery

  I need to recover my Toshba Equium L40 running Vista.

  So I put in the disk that come with the laptop when I got it, he began to do what he needed to do, I have chosen the language and press next and then Next again, then a BACK screen appears and begins to do things, this only getts so far and then stops and appears with errors and then after a while it's just closes the window BACK. I try to start the computer laptop nornmally but now I can't do same.

  What can I do to fix this?

  I am confused with this choice of language. Language is not editable and you must leave just already marked language.
  Can you continue with the installation of recovery if nothing is changed?
  Do you use a recovery media for the first time?

• Equium A210 - Diskpart error during recovery

  Hello

  I am recovering an Equium A210 to factory condition. I run the recovery utility and select the default settings. I get an error in diskpart and the recovery process stops. This I what it shows:
  "
  Try to remove all possible partitions on the HARD disk letters 0...
  Try to remove all the possible partitions on 1 HARD drive letters...

  Microsoft DiskPart version 6.0.6000
  Copyright (C) 1999-2007 Microsoft Corporation.
  On computer: MINWINPC

  Disk 0 is Noah the selected disk.

  DiskPart succeeded in cleaning the disk.

  DiskPart has encountered an unexpected error.
  Check the event log system for more information about the failure.
  ERROR: DiskPart failed!
  Press a key to continue...
  "
  How can I check the system event log when I have no way to look like the HARD drive has no operating system present.

  Any help and advice would be great.

  I don't really know what the problem is there but, if possible, get Microsoft Vista DVD facilities to see if you can install Vista correctly.
  If yes then there is something wrong with the recovery image files. If this isn't the case, I assume that there is something wrong with the HARD drive.

  Sorry, but that's all I can say at the moment.

• Need recovery disk Qosmio G30-163

  Hiya, my kids have my recovery disk for my g30-163 trached.
  you have one that you could kindly copy and sell to me or post for me. I would appreciate. IM desperate thanks Nick

  Hello

  As I m don't me wrong, the recovery disk could be ordered on this page:
  https://backupmedia.Toshiba.EU/landing.aspx

  If you receive a message indicating that the recovery disc could t be ordered, then you could try to order the recovery of the ASP from Toshiba (certified partner) disc.

  Check it out.

• error during recovery

  I put the recovery in the mobile disk, after he asked for all discs and copies all the files on the hard drive, it resstarts, but it says at the beginning of the process "a file unmaed is not found."

  the error is so little clear, what should I do?

  I have 3190ee dv6, it is the recovery of 64-bit windows 7, I totally formatted the HARD drive and remove all partitions, including the recovery (after he gave me the error I installed ubuntu linux, so the recovery partition was in good health when he gave me the error)

  Hello

  It seems that your laptop comes with Windows 7 Home Premium 64-bit, so it will be the commercial version, you need to borrow.

  Kind regards

  DP - K

• laptop G62-b98ED: 0xe0f00013 during recovery (new hard drive) error code

  In the HP Support Forum Iread the code 0xe0f00013 error during recovery (new hard drive).

  In this article, I go the Digital River en download Windows 7 Home site (http://msft.digitalrivercontent.net/win/X17-58997.iso)

  Unfortunately, this link is broken

  ("The Page or file you requested cannot be provided

  The resource you are looking for has been removed, had its name changed, or is temporarily unavailable.
  Error HTTP 404 - file or directory not found. »)

  In ths page I be called Micrrosoft to download on their site. After typing the registrationkey it says:

  'Product not supported '.
  The product key you have entered seems to be the software that was preinstalled on a device. Contact the manufacturer of the software device for recovery options. " »

  You have a different link to download the ISO of windows 7 Home Premium?

  I have not personally used this download link, but they seem to have good answers/responses from users it and 33K followers on Facebook.

  http://getintopc.com/softwares/operating-systems/Windows-7-Home-Premium-free-download-ISO-32-bit-64-bit/

• BSOD appears on Qosmio G30 during the recovery thread closed before the resolution

  I'm sorry, that I replied too soon!

  Whenever I try to install a fresh Windows Vista or use the recovery CD provided with my Qosmio G30 it shows me the BSOD...

  In all cases so I followed some instructions to install the RAID drivers as well and that seemed to work until to halfway through the installation it restarts (not restart usual as is normal in the installation of the OS) just randomly rebooted and said "start in safe mode / or nomally ', ' year error has occurred, insert your windows installation CD and click on fix my computer" I tried that for a while and he refuses to work all of a blow!

  Post edited by: farhan_l

  I couldn't t reinstall Win XP on my laptop because I used an old CD Win XP without SP2 preinstalled.
  After the installation XP rebooted notebook and the BSOD appeared.

  Finally I discovered I need an SP2. I ve understood my new XP CD using nLite software.
  You know this program? It s for free and can be downloaded from different websites.

• BSOD appears on Qosmio G30 during the recovery procedure

  Hello

  I have a Qosmio G30 and I want to format it and return to the out-of-the-box state...
  Unfortunately came with the laptop recovery CD doesn't seem to work...

  Whenever I try to boot from the DVD, it says "windows is loading files" and once this is done, it shows me the so-called "blue screen of death"...
  Is it possible that I can get another CD or make this work?

  Or remove RAID protection or anything that prevents me to install a fresh Windows VistaMD?

  Hello

  Of course, it of possible to order a new recovery CD, but I doubt that this problem could be related to a faulty recovery CD. But this is only my personal opinion and everything is possible.

  You have a clean Windows operating system?
  If so, try to boot from your original Windows CD and try to reinstall the operating system.

  The Qosmio G30 laptop supports RAID and you need to include the RAID driver by pressing the F6 key during the Windows Setup process.
  I think it would be useful to know if an installation of the OS to another CD is possible.

  Second question; have you changed the RAID settings in the BIOS?

• Recovery does not work wth my Qosmio G30-137

  Hello everyone, I have big problems with my Qosmio G30-137. I tried to put the system in the State of origin using the recovery disk. After booting from the floppy, the procedure starts as usual and gets to the language screen. Then the trouble begins. After selecting the language the error next watch-up and the process breaks. The worst is that the computer starts not more that a recovery is critical.

  Error message:

  IOCTRL_DISK_GET_LENGTH_INFO.------ ------PHYSICAL DRIVE 0
  The device is not ready

  It seems that the software can not see the drive. However, in the BIOS, both drives are visible and shown OK. I put the raid parameters to different options and I also tried swapping hard disks or restore with a single disc. Nothing worked! Panic mode...

  Thanks in advance!
  Frank

  Hallo Frank

  Have you tried to boot from another bootable CD/DVD?
  Try please use Microsoft WXP / Vista CD/DVD facilities. It will be interesting to see if the facilities procedure ends on the same point.

  But in my opinion, there is a problem with the HARD drive.

• lvl4. DISP error message will appear, and Qosmio G30-201 stops

  Hello

  I have a Qosmio G30-201 and have had it for almost 2 years now.
  Only a few weeks back I get an error message * error nv4.disp* and my system shuts down.
  I used the recovery many times cd and it does not work for a day or 2

  Any 1 can help please?

  Thank you

  Hello

  Try first update the BIOS and the graphics card driver.
  If this doesn't help then I would recommend contacting the ASP in your country as suggested by Akuma too.

  Good luck

• Qosmio G30 212 - English recovery CD

  I'm looking for links to download the CD recovery for my Qosmio G30-212, but in English instead of French (which I have now).
  Does anyone know where to find CDs?
  Any help is welcome ;-)

  Hello

  You can order the recovery of the AEP CD in your country. But I guess that you will not be able to order in English. You can only buy the same recovery CD that came with the laptop and it was a French language.

  What you could do is to install the original CD of Microsoft English Windows and then install the drivers of Toshiba of the page.