Equium A210: "tsst corp ts-l632h" firmware is not compatible with my drive

Similar Questions

• Satellite A210 - update the Firmware is not compatible

  I just tried to run this update sent through Tempo and I get an error message saying that the update of the firmware is not compatible with the selected drive. Contact the manufacturer for more information about the updates of the firmware.

  What I am doing wrong?

  My laptop model is A210 phone.
  Here is the information of update on my alert tempo.

  FTP - URL frmwre - 20080422163939.zip

  Date last modified 30/06/08
  Subtype TS-L632
  Version TO02

  Are 100% sure that your Satellite A210 was equipped with the TS-L632 drive?

  To my knowledge, the error message as mentioned in your ad appears only if the firmware is not compatible with the CD/DVD drive!

• Not compatible with the selected drive - Satellite A300D firmware update

  Hi, I have a problem with the update of the firmware. When I try it says "the Firmware is not compatible with the selected driver.

  And another problem is that my dvd drive does not DVD - R and DvD + R is running very slow and big trouble, it must try several times to succeed.

  Please help me.

  Hello

  Maybe you should tell us what CD/DVD drive you have and where you have downloaded the update of the firmware.
  In my opinion firmware update is not normally necessary.

  Have you ever tried to remove upper and lower filters in the registry? This often solves problems with ODD.

• Problems with TSST corp CDDVDW TS-H653Z

  MY TSST corp CDDVDW TS-H653Z does not recognize CDs and recordable DVDs. According to Windows, the latest version of the driver is installed. Any suggestion? Thank you.

  Hello

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  This troubleshooting could not help if there is alignment and/or wear issues however it
  a shot.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• Equium A210-1AS - it gets hot after BIOS update

  Hey, I was wondering if anyone can help here...

  Currently have a Toshiba Equium A210-1AS with BIOS version 1.80 worm 1.00PARTTBL 08/04/2008.

  Given that BIOS has been updated for a long time in this version 1.80 the computer became hot very quickly and therefore the laptop performance declined.
  I looked on the Toshiba support site and upgrade only version 2.00 was not compatible with this laptop.

  Any help would be greatly appreciated. Short model number is PSAFJE
  Thank you

  Hello

  I checked the site Web of Toshiba and I didn't see any BIOS update for satellite A210 PSAFJE. This means that an update of the BIOS was never marketed for this laptop, normally.

  To me it sounds like that you have updated the BIOS with one version for another Equium A210. So, you should go to an authorized service provider. Technicians can install the right version of BIOS for you (downgrade).

  Good bye

• Wanted to use parallel to Vista on Equium A210-17I XP

  I have a satellite A210 - 17l with Vista preinstalled on a HDD ATA with AMD Turion. Never thought to install XP over Vista on a laptop would be a complicated task.

  I've considered to run MS XP pro on a virtual machine or the implementation of a multiboot system. I did the last of them once or twice on a computer desktop, but not with Vista. Now, the thing is that there seems to be no option of virtualization for my setup. Virtual PC does not work on Vista Home premium, isn't VMware on an ATA and Xen is still not compatible with Vista at all.

  The option to install XP on another main partition seems to be as difficult as well. Tried with a slim streamed SP2 and base pro and none were able to boot from the CD. System configured to boot from DVD, but after checking the drive, it launches Vista again. Strangely, I put an old Win 98SE in the CD rom and it booted up withh options to install.

  Well, I can't work on what is happening with this, but if someone with the same successful machine to install XP or use a virtual machine, please answer.

  Perhaps someone else knows how to work around this problem?

  I have installed two operating systems on several models of different laptops without any problem. You can install Windows XP Sp2 home edition on the second partition with no problems. Download all the utilities and tools of Windows XP Home edition drivers and configure preinstalled WXP.

  How to make verification possible double boot
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=105863&

• Equium A210 - 17I PSAFJE - Lan and Wlan don't work running Windows XP

  Hello

  I recently received this A210-17I (PSAFJE) for Christmas, but to my dismay, it was not compatible with most of my computer games, I decided to downgrade to Windows XP, after reading about how I could do this, I decided to do it myself.

  So far everything works great, with the exception of 2 factors.
  The controller Ethernet and RTL8187B_WLAN_Adaptor, which appear as unknown devices in Device Manager.

  I installed ALL the drivers for download from Toshiba for this specific model page and I have operational including graphics and sound rest.

  The WLAN adapter is strange for me, I downloaded this driver: http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=1&PFid=1&Level=6& Conn = 5 & DownTypeID = 3 & GetDown = false & downloads = true (the bottom one for Windows) and it seemed to install OK with the provided setup.exe. But the device is still unknown, and it will not install if the folder "Update Driver".

  I have no idea what to do about the Ethernet controller :(

  Thanks for reading.

  * EDIT: Fixed; D *.

  Looks like you have already decided to install a compatible driver of LAN and WLan.
  Am I wrong?

  It of good to know that the problem is solved

• 32DV504B - TV Firmware does not load/display on TV

  Hi all

  I downloaded the latest update of firmware for my TV (x 2) - 32DV504B. I copied the file downloaded on a USB and connected to the TV. I can't get the file loaded at all.

  I tried many readers USB, many formats (FAT, FAT32, etc.) - exe on it's own, excerpts, but no matter what I can not do the upgrade, I tried to boot from the USB port, I've tried the settings, look for the upgrade - white bar just stays at zero by telling the search.

  any help would be appreciated.

  Concerning

  Barry

  Emmm... I wonder where to find the firmware for this model of TV... I checked the Toshiba Download Center and this TV is not listed...

  I guess the firmware update cannot be performed because the firmware is not compatible...

• How can satellite A210-15Y - I upgrade the firmware of the DVD drive?

  Hello

  I want to update the firmware of my DVD RW. It is TO01 and I updated TO03.
  Is TSSTcorp CDDVDW TS - L632H (TO01).

  I have download the .zip on the Toshiba site and extract. I run TSL632H_TO03.exe
  and it appeared an autorun.bin file in the same directory.

  What to do with this .bin file? When I doubleclick it, a dialog box appears to show the program
  for .bin files to run. Why is this? I don't have any program to .bin files. The content
  File PDF of firmware does not say something special to update the firmware, just for
  run the .exe.

  I am running the operating system Vista Home Premium 32 - bit that came with the notebook.

  Kind regards
  Nebojsa

  Hello!

  I think that there is a problem with the file that you downloaded.

  I checked the page of European Toshiba for Satellite A210 driver download and I can't find the TO03 firmware. I downloaded the zip file and zip in this file is a readme file and another zip file which contains an exe file that you need to start only.

  Maybe you need to download the file again. I can't find a .bat file in the archive. ?:|

  Good bye

• Reinstall for TSST corp CDDVDW TS - L633B ATA device

  I have the yellow exclamation mark beside TSST corp CDDVDW TS-L633B ATA cd/dvd drive device, I ran a fix, but it tells me that I need to reinstall. How can I do this? The cd player has always been very sensitive. Sometimes, longer works once not.

  I have the yellow exclamation mark beside TSST corp CDDVDW TS-L633B ATA cd/dvd drive device, I ran a fix, but it tells me that I need to reinstall. How can I do this? The cd player has always been very sensitive. Sometimes, longer works once not.

  Here is the solution to update your device with the latest driver of Toshiba/Samsung.

  Introductory material.

  
  

  1 here is the update for TSSTcorp CDDVDW TS-L633B ATA DEVICE.

  2. There is a update for the Samsung TS-L633B, but there only version SC01, which WILL NOT be updated the version of the TS-L633B HP because HP version is 0301 with an OEM Code of HM.

  3. However, Samsung has renamed TS-L633B with a new device driver ATA which is called SN-S083B and has a pilot SC02 update.

  4. the way that you update TS-L633B Code 0301 Version with HM Code OEM with the new Samsung SN - S083B Version SC02 Code is to patch the file and flash TS-L633B HP with the patched file.

  Instructions.

  
  

  IMPORTANT - THIS ONLY REFERS to those who have the HP TSSTcorp CDDVDW TS - L633B ATA Device - check device manager to make sure that you have this model number device driver before you start - YOU DO THIS at YOUR OWN RISK. Proceed only if your product is not guaranteed and do not wish to pay for another DVD player.

  1. click on the following link and download the firmware SB02. Global Distribution of SN-S083B: http://www.firmwarehq.com/download_1380-file_SN-S083B_SB02.exe.html

  2. If you don't have a utility program unzipped, click on the following link and download and install 7zip that corresponds to your computer from the following link: http://www.7-zip.org/download.html

  The BIN SN-S083B unzip using 7zip by right clicking on it and choosing 7ZIP > extract here.

  3 download the Flash Samsung Standalone utility:

  http://www.samsungodd.com/KorLib/file/tsdnwin.exe

  4. download and unzip http://ala42.cdfreaks.com/MCSE/MediaCodeSpeedEdit.zip to ala42 MCSE

  Download source: http://ala42.cdfreaks.com/MCSE/

  5 create a folder and name it FLASH and place the following 3 items in the folder.

  SN - S083B_SB02.bin that you have checked out

  Flashing Samsung Standalone utility

  MCSE of Ala42 you have downloaded and extracted the zip file

  6. After you have placed all three objects in step 5 in the folder named FLASH, place the FLASH folder and all of its contents in the C drive.

  7. After placing the FLASH folder in C drive, open the folder and CLICK on RUN AS ADMINISTRATOR and ALA42 MediaCodeSpeedEdit.exe RIGHT.

  8. when ALA42 MediaCodeSpeedEdit.exe opens, click the LOAD button and place you in the FLASH folder in C drive and load the file SN - S083B_SB02.bin - when the file it load it will show all of its regions.

  9. once the file SN - S083B_SB02.bin is fully loaded, place a check MARK in the area of CPR1 in the lower right of ALA42 MCSE.

  10. After putting a check in the box by ALA42 MCSE CPR1, click SAVE in the upper right and save the file in the file FLASH as SN - S083B_SB02_speedpatched.bin.

  11. now go to START > all PROGRAMS > ACCESSORIES > COMMAND PROMPT and right click on command prompt and choose RUN AS ADMINISTRATOR to open the command prompt in the Administrator role.

  12. once the command prompt opens, type the following command: CD C:\FLASH and press the ENTER KEY.

  13 after hitting the button enter, the command prompt should read FLASH.

  14. to the FLASH command prompt, type the following: nocheck tsdnwin and press the Enter button to open the flashing Samsung Stand Alone.

  15. when the flashing Samsung Stand Alone opens, click on the on button SEARCH and navigate to the file 'SN - S083B_SB02_speedpatched.bin"to load it into Samsung's Flash utility.

  16. the file "SN - S083B_SB02_speedpatched.bin ' will load and click on DOWNLOAD to start flashing your TS-L633B ATA Device.

  Wait until the flash is finished and when it finishes, it will ask you to restart the computer and you must restart.

  When you rebott and are back at your desk, Windows will recognize the drivers for your TS-L633B ATA Device and install the new drivers SN-S083B_SB02.

  When it finishes installing your drivers, restart the computer once more, and then you're done.

  NOW ENJOY your CD/DVD-RW drive updated.

• TSST corp CDDVDW TS-L633B stopped reading and writing

  I have a laptop Acer 4736Z with a TSST corp CDDVDW TS-L633B DVD - RW, so decide simply ceased to read and write DVDs and CDs. When I insert a blank dvd, it will ask me to burn files to it but when I do, it complements the habit and will the useless DVDs. When I insert CD or DVD, the drive does not read it more.

  Please help me on how to solve this problem.
  Thank you

  Hello

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  This troubleshooting might not help if there are problems of alignment and wear it
  is worth it.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click the device - driver
  Tab: click on update drivers (this will probably do nothing) - then do a CLICK RIGHT to the road.
  UNINSTALL - REBOOT this will refresh the default driver stack. Even if the disc is not
  shown continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other
  programs - a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you
  upgrade to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the
  Setup Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then check
  in both ends of the cables. Remove and replace, do not just tight. For portable computers, you can
  Often, clean power and contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the system
  Designer and manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case
  (Read burn CD & DVD and CD and DVD). It's not unusual for 1 or 2 parts to not
  function, while others do so correctly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  some registry entries that do not fix the resolution of problems and those who 'could' be the
  cause.

  Check with your system manufacturer Maker and device for these two possible firmware updates
  and the correct registry entries for your car.

  Here are the keys in my opinion, are those in question - for the subkeys of the CD/DVD drive
  of course there will be other subkeys in these keys. Do not forget to ask specific keys
  in question as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even right for registry settings
  your CD/DVD from someone with the same drive model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager,
  that displays all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• TSST corp DVD won't read or write

  I have a desktop Dell VISTA computer.  He's got a TSST corp DVD +-RW ts-H653B ATA Device.   When I got the computer from Dell (April 2008), the DVD worked fine.   Now it is not recognized by Device Manager - it is for me a "Code 10" - that it does not start.   I tried everything.  My machine is a Dell VISTA home Premeium

  Any ideas? send me an email to * address email is removed from the privacy *

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Please make all below even if you have done some before as it is often the set of operations which solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack.

  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Equium A210-17I do not start - how to access password protected HDD?

  My Equium A210-17I (model: PSAFJE) died recently and I'm trying to recover the contents of the hard drive.

  I hope that I can just put the drive into another laptop and start (either by using the player itself or a Live CD). Unfortunately, when I put the drive in another machine, it prompts me for a password HDD/SSD but say that the password is incorrect.

  Anyone have any ideas? The Equium stores a version coded the password or something?

  Any help would be appreciated.

  What I've tried so far:

  1 put the drive in Toshiba Satellite C655. Request password and after 3 wrong attempts to stop.

  2. put the disc into the Compaq 610. Request of password and after 2 attempts to let me Live CD boot. However, once started, the drive is not visible at all (disabled by BIOS).

  3. with all the variations of portable password input - completed by zeros, dashes, spaces, etc.. Uppercase, backward, etc..

  In what concerns the attempts to revive the satellite (so I can remove the hard drive password):

  When it is plugged in, power and load front lights.
  When lit, the logo turns on, the fan turns and can also hear the hard drive.
  Then there's just in this State.
  No display, no beeps, no lights on the keyboard.

  Tried to start after removing the hard drive and CD-ROM drive. Also tried without the installed memory. All the same result.

  Thanks for your help.

  > Unfortunately, when I put the drive in another machine, it prompts me for a password HDD/SSD but say that the password is incorrect.

  It seems that the HARD drive has been guaranteed by a HARD drive password.
  Mate sorry but this password cannot be deleted if you n t know the password.

  Usually to remove the HARD drive password, you must put the HARD drive in the Toshiba laptop, have access the BIOS and there is an option called HARD drive password which allows you to remove the HARD drive KNOWN password.

• Equium A210 starts with error - PXE - E61 Media test failure

  Trying to help a friend that we think that the laptop has been damaged by the virus Exploit.Drop.G... All I could think and decided as a last resort to execute tried suggested wipe drive. This succeeded and I thought I'd be able to reinstall Vista from the disc, but I get the above error message. The laptop is a Toshiba Equium A210-1VO (model PSAF5E-001005KS number).

  I noticed once before when using this laptop CD/DVD could not play DVD I tried all tips disassembling upper and lower filters etc, but could not solve this problem (which was pre virus). When I boot on utilities system that she admit HDD like Hitachi-(S1), optical disc drive: TSSTcorpCD/DVGW TS-L632D, and says total memory 2048 MB system BIOS version 1.60.

  Totally stuck now, any advice/help would be much appreciated.

  I think for some reason any HDD is not recognized as a boot device.
  Start your laptop and press F12 repeatedly to enter the boot options.
  He put original recovery disk or the ODD Microsoft installation disk when startup options are displayed on the screen.
  Choose the CD/DVD as a boot device and press ENTER.

  What happens when you do this?

  A few days ago, I had a similar question about friends A300. HARD drive was defective. After Exchange of HARD drive, I was able to install Win.

• Equium A210 - after that set BIOS to update the DVD player has stopped working

  Hi, since I have recently updated my BIOS, my DVD drive has stopped working on my Equium A210-1AS with Vista 32 bit.

  I tried the program fixme Microsoft who does not work, upper and lower register isn't here ether in regedit.
  Someone at - it solutions for getting the DVD drive working again?

  Thank you

  Hello!

  The CD/DVD drive is listed in Device Manager? You see an error code?
  If the drive is listed in Device Manager, you should try to remove it, and then restart the laptop.

  Try to load the default settings in the BIOS.

  Have you tried to remove the upper and lower filters by yourself? Here is the solution from Microsoft:
  http://support.Microsoft.com/kb/314060

  Good bye