Equium L-20: the keyboard randomly do not type

I have an L-20 Equium, just bought it and every so often that missing characters while typing, these are random, it isn t as if some keys are sticking can cross and type the alphabet and all 2 or 3 times it will run out of letters or characters on as if I n t you press the keys also the space bar can fail from time to time.

It would be a lack of keyboard or software, it s kind of intrigued me and almost at the point of return it for a replacement.
During this short message he missed 4 letters, had to check and fill in the blanks

Hello

Well, I read a few topics on similar problems in this forum and I think that it s is not a problem of keyboard player. In my view there s something wrong with the hardware of the keyboard or with the connection of the cable.
I think the best way is to contact the ASP for the detailed information. If the warranty is valid, all replacements are performed free of charge.

Good bye

Tags: Toshiba

Similar Questions

  • HP keyboard model kg-0851, I tried all the steps from hp, but the keyboard still does not

    I tried all the steps from hp, but the keyboard still does not.  When I look at the Device Manager, it says that it is fine.

    Hello

    1. what operating system is installed on the computer?
    2 have. what troubleshooting measures you tried?
    3. don't you make changes to the computer before the show?

    I suggest you try the steps from the following link:

    Mouse, touchpad and keyboard with Windows problems
    http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  • Equium M50-235: the keyboard does not work after upgrde memory

    I just did an upgrade memory on my laptop using the second slot located under the keyboard.
    However, as I was putting the keyboard at the rear, the ribbon cable has pulled away from the motherboard and even if I pushed
    Reconnect and fixed with the clip, the keyboard no longer works.

    Is there a service manual I can get hold of someone know what could be the cause of the problem?

    Thank you!

    Hello

    First of all, once you unscrew the keyboard, open the clip that secures it in place and reinstall the keyboard by ensuring that it is completely down. After that, now the flat cable in place, close the clip. Then, make sure that it is not lost and that it is seated correctly. Then turn on the laptop and see if it works. If this is not the case, try an external keyboard. If an external keyboard does not work, the keyboard on your MB controller is dead and you need a new MB. If an external keyboard works then your keyboard is dead, or the connector on the MB is dead. Best way to test is to try the first solution. If it doesn't work, take it to an ASP so they can try another keyboard for your laptop. Good luck.

  • Any way to fix the keyboard backlight does not not 2011 macbook pro

    No way to fix the keyboard backlight, what does not work, on my macbook pro 2011. El Capitan was installed earlier. I had a gray screen the other day and had to restart in safe mode. That's when the backlight is out. Thank you very much!

    Susie

    1. press the F6 key twice.

    2 reset the SMC and NVRAM.

    Reset the NVRAM/PRAM memory.  http://support.Apple.com/kb/PH18761

    Reset the SMC. Choose the method for "on Mac Laptops with non-removable battery.

    https://support.Apple.com/en-us/HT201295

  • Why the keyboard commands do not work with FF v5?

    I can't get at home, end, PG. PREC, PG. Next, up arrow, Basel keys to do something sensible. I checked all my addons and extensions are all to date. This started when I upgraded from v3.x to v4.0 and made things worse with version 5.0.

    Solving problem of cursor (F7) circumflex accent

    Problems using the keys Page Up, Page Down, space bar, homeand end

    F7 to switch the power slider cursor (you want it to be turned off)

    Firefox problems & questions (Notes)

    Add the following lines to your user.js in your profile file, you create the file, it does not exist by default. You can mess up by pressing F7 accidentally, but what follows will restore the values in your prefs.js as seen in your comments: with each new session of Firefox addons.

    / / Get the SPACEBAR, PageUp, PageDown to work correctly if accidentally hit F7
    / / see http://dmcritchie.mvps.org/firefox/firefox-problems.htm#caret
    user_pref ("accessibility.browsewithcaret", false);
    user_pref ("accessibility.warn_on_browsewithcaret", true); »

    To open your folder profile and to create/update user.js to solve the problem

    1. type of topic: support in the address bar
    2. Click on the button 'Open containing folder'.
    3. Use the file menu to create a new text file,
    4. Rename "New Document file.txt" to "user.js".
    5. Open fie and paste the maps above into the file and save

    When using press F7 if you see any messages that you have restored the value to what you want, if you press once again you get a warning message use the 'No' button to keep the current settings. (Do not remove the warning)

    References:

  • Some keys on the keyboard does work not after the suspect virus on Tecra

    Apostrophe, delete, semicolon and the end of the keys no longer work after a suspected virus attack. I found the same problem on the net record but apparently this guy fixes his problem after stop scroll or NumLock on found him.

    This isn't the case here, but it's something with numlock - registry Watch 2 and not 0. switch to 0 but when reboot 2 times.
    Suspect has changed through the bios. I thought that I couldn't get to the bios because DEL key does not but found ESC works.
    Tried to reset the values default to the bios but then can't save and exit it in accordance with the EndKey to work.

    I was running XP at the time of the (alleged) attack and could not correct the problem so to put the computer OEM as I hoped would help - there no, same problem, so instead of installing all the software on the computer with XP I upgraded to Windows7 - charge install.

    Keys still don't work - it was a real pain first as my computer was created for ctl + alt + delete to log on and I had to do with the keyboard of the screen - XP - it showed also that numlock performed before and after windows starts.

    The reason why I suspect a virus - my wife was watching an of its tv shows on the line of the country of origin (an another toshiba laptop) and I needed to use this laptop for something else, so I asked to use mine - then we turned off laptops and the morning turned tham back on again once , the other laptop with virus protection AVG reported several hits and this one with Norton (FAMOUS and completely up-to-date) flagged nothing - once I got the screen keyboard.

    Problems with this computer were found after scanning with different antivirus.
    Anyway - I find myself with 4 keys that don't work not on my keyboard (in fact they work after I have connected to the computer for the first time, but I had to hold them in place for a long time - and then the next time I rebooted, not at all and did not since)

    Here, any help would be greatly appreciated, I'm working on this all weekend with no joy at all.

    Thanks in advance.

    Having a virus attack, the Windows files will be destroyed. Try the scan with kaspersky on Nod 32. If not help, reinstall os because it is the best solution in your case.

  • Equium 60 - remove the keyboard, upgrading RAM

    How to remove the keyboard to access the 256 MB of RAM, which is apparently below? The screws are marked with a reference for example B8. Who are those to unscrew?
    Another thing to watch Anyything?

    Thank you

    Why would you remove the keyboard?
    Memory module compartment is placed at the bottom of the unit and that a single screw secures the cover of the location.

    In addition he laptop support 256 MB internal memory! This memory is not removable! So you will not have to remove the keyboard!

    I think everything should be clear now.

    Good bye

  • The water in some of the keyboard keys - does not work

    I recently spilled water on the keyboard and now only some keys do not work. Is it possible to dry out or if not is it possible to have a new mounted keyboard?

    Any help is greatly appreciated.

    Hello

    I don't know if it is possible to dry it and if it will help you to solve this problem, but you can replace the keyboard Mr. in this case, you should ask the ASP for the detailed information.
    ASP can also order the compatible keyboard for you.

    Good bye

  • the keyboard layout does not change stuck in American English.

    Original title: stuck in American English

    I was using my laptop with the keyboard moving between French or British English that I didn't ask, no problem this morning. Now he has decided to keep on American English, no matter what language, the taskbar says he uses. I did not put that American English is at all today. Help, please!

    Thank you, but have been there, what did somehow.
    Did not any changes that I knew. Also had bees through the diagnostic steps suggest you, but not joy. My husband has finally solved the problem: he found a small icon (somewhere lower right scale) that looks like a keyboard and it was worth it-set to U.S. English, but where he found I do not have a clue and have never managed to find since!

  • Reinstalled XP on laptop, now the keyboard keys are not mapped correctly

    Hello world

    I recently reinstalled Windows XP on my laptop because it became mega sucky and slow after three years to have. In any case, the keys on the keyboard are not how they were originally. For example, pressing SHIFT + ' originally produced @, now is '. '. Also initially produced shift + 2 "now it's @." There are a few questions like these across the keyboard. Could someone point me in the right direction to solve this?

    Thank you very much!

    David

    25/08/2010 09:10 am, diddlewotsit wrote:

    Hello world

    I recently reinstalled Windows XP on my laptop because it became mega
    sucky and slow after three years to have. In any case the keys on the
    keyboard are not how they were originally. For example, by pressing
    Shift + ' originally produced @, now is '. '. Also shift + 2
    originally produced "now it's @." There are a few questions like these
    throughout the keyboard. Could someone point me in the right
    direction to solve this?

    Thank you very much

    Control Panel > regional and Language Options > languages.  Click on the Details button and change the entry to the keyboard.

    John

  • Problem with the keyboard work is not on the computer.

    my keyboard works in BIOS, but not on windows, if I look in Device Manager, it seems that it is not detected, same result if I ask to install new hardware it says no new hardware found

    This problem is more than a FEW DAYS OLD?  How the question, "my keyboard works in BIOS but not in windows" would be only a few days old?  Don't you have the machine but left on? Heh

    If possible, restore back those days (if these days are before you wrote the question).

    The keyboard works in Mode safe?

    If so, the keyboard works for other users (create one if you haven't)?

    Is there any "unknown devices" in Device Manager?

    Other options that come to mind:

    1. Use the System File Checker tool to repair missing or corrupted system files
    2. Windows Vista repair install
  • control of the volume on the keyboard keys do not work with usb dac

    o/s ultimate win7, ms wired keyboard 600, usb dac.

    I finally got the volume bar work, he reacts to the keys flight + /, but the volume remains the same.

    the only way I can change the volume is with my mouse in the window of Mixer volume, which is very inconvenient.

    no idea why the flying keys do not affect usb taken?

    Thank you

    Hi Yogi46,

    ·        Have you installed the software supplied with the Microsoft keyboard keyboard?

    ·        Who is the manufacturer of the computer, and what is the model of the computer number?

    I suggest to access the link below and download the keyboard theIntelliType Pro 8.0 for Windows 7 software and install it and check it out it allows you to change the volume using the keyboard.

    http://www.Microsoft.com/hardware/download/DownloadResult.aspx?category=MK&type=keyboard&name=anb-00001&OS=Win7_32&lang=en

    I hope this helps. Let us know the results.

    Thank you and best regards,

     

    Srinivas R

    Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Why my tab on the keyboard key does not work since the upgrade to 16.0 FF?

    Noticed this trying to get around on your website, GMail etc so that I can move from one field to (example: in the field in Gmail, hit the tab key on the keyboard to move to the field of the object).
    Inadmissible tab button.
    Safari and Chrome have this ability. Obviously something has occurred that I updated today to 16.0 and yet I was indeed in the 15.x.

    This key is important for speed for a daily work. Please tell us how can I re - activate its features.

    Thank you.

    COR - el,

    Just updated tonight at 16.0.1 and voila, the problem has been resolved without being too technical.

    Wanted to thank you for your help.

  • Why not ' t the illumination of the keyboard upwards when I type?

    the keyboard on my laptop always turn on when you press a button and just stopped, how to enable light sources?

    The lighting of the keyboard is a function of the software installed by the manufacturer of your laptop.

    I would go to the support site of the manufacturer of your laptop for assistance.

    Also, check the manual that came with your laptop.

  • the keyboard commands do not work in loaded swf

    I have a game swf that uses the keyboard listeners. They work fine when played directly sovereign wealth funds. HOWEVER, once the game has been loaded into a swf Preloader parent - who plays an HTML-, listeners of the keyboard do any work.

    In the headphones of keyboard do I have to refer to the mother? If so, how? Any help would be greatly appreciated!

    I found the solution.

    I use a component ComboBox in the Preloader clip parent, which means that I had to delete or create a FocusManager of the components object.

    For the last line of the function of EventHandler for ComboBox, I added

    removeChild (event.target.parent.cBox);

    Who did the trick.

Maybe you are looking for