Equium L40 very slow and Windows Defender found a Trojan horse

Similar Questions

• Equium A60 very slow with Windows XP SP 2

  This Toshiba unit very boots very slow, it takes forever to get started it got a software firewall installed but it is not correct that it really takes ages to boot up a laptop like this. I have searced for a few updates here, but I have not really found something. Is there a known issue with windows xp and sp 2 for this laptop?

  Do you have any adviecs?

  Concerning
  Matts

  Hello

  I had the similar problem with my Satellite P10. After installation of SP2, the startup procedure takes much longer. Check please the processes that start to run and disable some of them if you n t need them.

  Have you installed SP2 or it is also to the recovery image?

  In my opinion, it is not specific for certain just usual laptop models. My second unit (without SP2) starts a lot faster.

• Windows XP is very slow and auto update works but when I try to run internet explore the system times out. »

  Original title: Windows XP runs very slow

  Windows XP is very slow and auto update works, but when I try to run internet explore the system times out.

  Hi Bill,

  Thanks for posting your question in the Microsoft Community.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. What is the error message that is accurate or complete?
  2. have you made any recent hardware or exchange of software on your computer before the show?

  Please follow the links below and check the issue:

  Maintenance tasks that improve performance:
  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/maintenance-improve-performance

  Slow PC? Optimize your computer for optimal performance:
  http://www.Microsoft.com/athome/Setup/optimize.aspx#fBid=R7qdKIMaJyT

  Warning of Chkdsk.
  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.
  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Internet Explorer is slow? 5 things to try:
  http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Your response is very important for us to ensure a proper resolution. Please get back to us to help you accordingly.

• My windows 8.1 is running very slow and freezes from time to time.

  My windows 8.1 is running very slow and freezes from time to time. So I ran sfc/scannow. It finds corrupted files, but could not correct. So I ran "dism / online/cleanup-image /restorehealth ' but there as well. Please help as soon as possible. Thank you!!!

  Original title: find files corrupt after sfc/scannow and could not repair

  Hello Akash,

  Thanks for the reply.

  As you said, after completing the scan found SFC, you get an error message indicating that there is corruption but was not repaired. Then, please follow the following suggestions to solve the problem.

  Use the System File Checker tool to repair missing or corrupted system files

  (Refer to: manually replace the corrupted file with a good copy of the file)

  http://support.Microsoft.com/kb/929833/en-us

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

• installed the new windows Friday and since my computer is very slow and not connecting to internet properly

  installed the new windows Friday and since my computer is very slow and not connecting to the internet correctly... anyone else having these issues?

  System Restore to go back before the show.

  I suggest you to install the updates one by one and reboot the computer after installing each update to verify that update is causing the problem.

  Also note the updates that you install on the computer.

  Once you come to know what update is causing the problem, let us know.

  Do not install any driver updates offered by Windows Update. Find them in the manufacturer's website instead.

  Try a convenience store

  Windows includes two programs of troubleshooting that you can use to automatically fix some common problems with performance on your computer or to the maintenance of your system.

  Open the Performance troubleshooting utility by clicking the Start button, then Control Panel.

  In the search box, type Troubleshooting, and then click Troubleshooting.

  Under system and security, click check for performance issues.

  Open the of System Maintenance Troubleshooter by clicking the Start button, then Control Panel.

  In the search box, type Troubleshooting, and then click Troubleshooting.

  Under system and security, click run maintenance tasks.

  08/14 / 1115:46: 45 pm UTC

• Using Acrobat Pro and what impression on network printer it prints very slow. I have found that if we choose to print the image works fine. But how do I print as image remains for all of my PDF files. I have to choose each time now and it's not always r

  Using Acrobat Pro and what impression on network printer it prints very slow. I have found that if we choose to print the image works fine. But how do I print as image remains for all of my PDF files. I have to choose every time now and that is not always known.

  Hi jeans37547790,

  Please do mention it below as follows to change the settings:

  Open Acrobat > click file > print > click on advanced > and check the box that says "Print as Image".

  Here is the screenshot:

  .

  

  Let us know if you face any problem.

  Thank you!

  Shivam

• Windows Update not working do not Error Message and Windows Defender cannot update Error Message definitions

  I have a laptop Dell 1501 with Vista Home Basic 32-bit.

  I ran CA 2010 Security Suite and you have scanned for Malware with regard to the Windows Update Error Message. He found none. I ran Microsoft Malware malicious tool, and it found. I ran Windows Defender and he found. I don't have CA and Windows Firewall to protect my computer and I have disabled both in trying to solve this problem of Windows Update and Windows Defender.

  I got this error 4 days ago. Here is what I tried:

  -I went on various Web sites, including Microsoft Support - and tried to solve the problem through services.msc and msconfig.exe. None worked.

  -J' noticed in msconfig. where it says start waiting next to Windows Update. There are 3-4 elements, which are affiliated to Windows Update and made sure they did not exist in the registry.

  -J' have to ensure that they were supposed to be automatic or manual under services.msc.

  -J' rebooted several times and nothing changes.

  Windows Defender does not update the definitions, and I do not know if this coincides with the release of Windows does not.

  I am at my wit's end and do not want to crash and burn my computer.

  I need serious help. Please, I beg you!

  Thank you.

  LRR100

  I had to call Microsoft. Alex tried to add registry keys and input upgrade.

  My Windows Update has almost been altered. It could be my mistake or it has become corrupted when running other services at the same time.

  I was sent a Windows 7 Home Premium Disc to upgrade and start over, as my Vista disk was corrupted as well.

  I would not recommend trying one of the suggestions listed on other sites. It's my personal opinion because I have in the past and it worsened my problem.

  I also wouldn't delete all programs (unless absolutely necessary) because I remove 4 MSMXL and he made their work more difficult.

  ________________________________________________________________________________________________________________________________

  Sometimes the only solution is to call Microsoft and they will evaluate if a charge of telephone support is necessary from the outset, before they run for your problem.

  Despite what you may have read, Microsoft Technical Support technicians are very efficient and kind.

  We inform you to open a slot during your day or even open your day for the problem to be solved.

  Mine took 2 1/2 hours, and they had to remind me the next day to make the order for the disk because it could not be done the same day.

  The more patient and kind you are, the best representative.

  Hope this helps and thanks for reading,.

  LRR100

• Computer is very slow and IE does not work all the time.

  I bought a computer from my old employeer.  He is doing all sorts of things, or should I say not to do all sorts of things.  It is very slow and IE does not work all the time.  They have questions arise and ask if the administrator oks things and other things like that.  It came with any disks.  I would like to wipe, clean and load a new disc, but I don't know where to find the disc or if I can do it.   Can someone please?

  Hello

  Proceed as follows to contribute to these two questions. You can probably buy the disks of Vista machine to system or get
  the former employer to do it for you if necessary.

  Try these and it can also be a good idea to update your main drivers later. The General corruption can also play a
  role in this issue. And even the TCP/IP stack might need to be refreshed.

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  If no joy there's something blocking perhaps.

  Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE or IE with no addons

  not better?

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only.

  http://www.Malwarebytes.org/

  --------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------

  Departure - in the search box, type-> order

  at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN

  Type the following commands (or copy and paste one at a time), each followed by pressing on enter.

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  RESET

  That resets your TCP/IP stack

  --------------------------------

  Maybe need of these:

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Hanging of Thunderbird 38, gel and does not question. 17 accounts pop (Win 8.1, MalwareBytes and Windows Defender)

  Since the update of Thunderbird to 38.* I had nothing but problems with Thunderbird wedging (spinning wheel waiting), a "Mozilla Thunderbird (not answer) ' in the header bar, whiting of window application out and possibly TB box in hell - a small box to appear asking if I want to - close the program, expected so he can resolve itself , or check the internet, then close. I now give the floor it the box to hell (B2H - call it all you want, but I'm cursed every time he pop up!)

  I did everything proposed here and nothing suits. I have used Thunderbird for years with all the same files and Add ons WITHOUT problem. On the first day of the 38 update everything has changed. When Mozilla realizes that it is in the upgrade and find the problem!

  Here is what I tried with nothing working...
  1. I don't have AVG, the only malware bytes and windows defender
  2. it still happens in SafeMode with no active add-on.
  3. I stopped saving function which slows down the frequency of the sinking, but did not eliminate the problem.
  4. I have deleted hundreds of older emails, thinking it was that but who have done nothing.
  5. I changed some accounts of POP at the thought of iMAP that was the problem but nothing has changed.
  6. I made several attempts to patch both Mozilla support and outdoors on the net. Nothing works. Looking at all the people who have the same problems, I have to say that the problem is handling of file. I noticed that as the issue with others who have multi files and emails. The answer is not to reduce these volumes but to understand why thunderbird managed their fine before and what has changed to make the program hang now? Who should be on your end, taken responsibility. Keep us faithful and solve the problem...

  Here are my tips...

  A. I have several files and thousands of e-mails longer and have manged fines, as matter of fact, Thunderbird has been great. Then like a good stooge I approved the moz and did my upgrade to 38. Never had a problem before the upgrade. After the upgrade, everything went to *.

  B. the 38 version upgrade was a big change. When I look in the folder that has been labeled the envoys or Inbox folder (where all emails from each account is collected), all the emails listed would disappear when I moved my mouse over them! Emails disappearing! They were there in records specific e-mail below but not but in the case of head as if it were just a day earlier and with the upgrade. I thought that as an addition on the question and waited for the difficulty that happened not so long ago. Again, which could be a problem of record add-on.

  C. the upgrade to 38 were other issues, but if the madness going no problem was not bad enough, the problem seems to be growing with each ' update or bugfix that followed. Don't hold me to it but I think it was in 38.1.2 or 8 (I think that's it. I wasn't paying attention, but if I had known that I would have to tell it, I will!) That's when hanging interminably long. When the program closed at least I got a project saved, then I read on line that the problem was the registration of open messages, I turned the auto reduction. He did change the frequency of the hanging (white screen pause) and timing (where the B2H appears), but he was always there and always!

  D. I had hoped with 38.2 there will be improvements. Nothing has changed. I didn't know that 38.3 would make this change/fix, but it's not. If I write all this, so you have what I know as a loyal user since 2007.

  E. here is what you need to complete the picture. I'm on a PC running 8.1. on an Intel i7-4770, with 32 GB of ram, now you tell me when you will issue the update to fix the problem! Once again, Mozilla, I suggest you start by looking at how TB 38 manages several emails, files and archives. Not all of us have only one e-mail account. Most of us have been really happy with TB before 38. If you can't find the question, can you show us how to get back to a version prior to 38?

  Thanks for listening and hope that helps!
  @v @.

  
  

• Satellite Pro M10 suddenly ran very slow and freezes

  Two weeks ago, that my SP M10 is suddenly very slow and freeze. After a reset, it began to check the HARD drive, which lasted about 8 hours, and several repair lost clusters to files. But the student pilot did not run faster. I reformatted the HDD to FAT32 (NTFS has not worked) and reinstalled Windows XP. First, it seemed to work very well, but a few hours later, it freezes again.

  After 10-20 min, I got access. This has not changed so far. CHKDSK another also lasted several hours and again showed some lost clusters. I think that my HARD drive is damaged, but how can I see if there a lot of bad sectors? Can I fix it? Can I possibly replace my 40 GB HARD drive with a larger HARD drive capacity?

  Are there restrictions or can I use any brand?

  Hello

  I had the same problem with my Satellite 1900. The result was the HARD drive damaged (bad sectors). I tried to fix it with different tools, but without success. The best solution is to swap the HARD drive.

  Good bye

• Satellite Pro L500 - wireless connection is very slow and unstable

  Hello

  I bought a Satellite Pro L500 a couple of weeks (Windows 7 and Realtek 8191SE). I have no problem connecting to public networks, but I can't use it at my place, where I have a broadband cable connection.
  The strange thing is that, in the same room, I have no problem with my old A105 Satellite (Windows XP).

  It is also very strange the fact that, even if the signal is good, sometimes excellent, the connection is very slow and unstable (it disconnects when I try to browse the Internet).

  I have already tried:

  -Update the Realtek drivers.
  -Disconnect the firewall;
  -Modification of the properties of the Realtek card.

  Maybe it's a problem with the software or, on the contrary, with the material?

  Thank you!
  Poncet

  Hi Patrick,

  If you can connect to public networks correctly, I think that this problem is related to your router at home. So I would recommend updating the firmware on your router. You can get it on the page of manufactured goods.

  Also try to disable WLAN encryption and MAC address filtering.

  By the way: you can access the Internet at home via a cable connection?

• Halo 2:When I use my mouse on the line, the cursor movement is very slow and jerky.

  original title: halo 2

  Hello... Just installed Halo 2 on my Windows 7, 64-bit desktop.  I have all the latest drivers. All other games work fine.

  When I use my mouse on the line, the cursor movement is very slow and jerky. Unplayable.

  I was looking for a patch for the game or suggestion on how to correct adjust them.  I tried the option in game of adjustment of moving the mouse, but it did not help.

  Suggestions please...

  ----------------

• Games led by 7 Microsoft running very slow and draggy

  I still have a problem to play all the games on my new computer, which is managed by Windows 7.  The game runs very slow and response of the mouse and other controls are slow and draggy.  Please notify.

  What video card you are using as well as the model and brand of PC?

  Have you updated all readers more recent? If this is not the case consult your OEM and download all the latest drivers for Win 7

  MCP. MCDST. LVL 80

• I have xp windpws and now when I try to see a video is very slow and I see it in pieces can you check my pc online?

  my pc has been warking very well, but today when I try to enter the tube you or see videos from my pc, they play very slow and they sound like a robot! I check it online for viruses, but he had not found.

  Hello

  -Did you change your computer, after which the question began?

  I suggest that you are restoring the system to the point that your computer was working normally.

• Whenever I connect to Facebook my computer starts freezing, running slow and window pops up saying there is a script running on the page.

  Original title: another scrpt running on the page

  whenever I log in Facebook my computer began to freeze and sometimes throws me completely. If not, it runs very slowly and window pops up saying that a script is running on the page which is the origin of the page to run slowly and can freeze your computer, press Yes to continue.how can I get rid of this

  Hi Eva,

  1. what web browser do you use?

  2. What if the problem occurs with all the site or it confined to Facebook?

  3. did you of recent changes on the system?

  Method 1:

  If you use Internet Explorer, you can view the following items and check if it helps.

  How to resolve script errors in Internet Explorer on Windows computers

  Error message: "a script on this page slows down Internet Explorer runs slowly.

  Method 2:

  You can also try the steps in the following link and check if this solves the problem.

  How to optimize Internet explorer?

  Hope this information is useful.