Equium M40X: Issue information and system devices.

Similar Questions

• Equium M40X specification information required

  Hello
  I hope that there is someone on the forum who can help me.

  I have a satellite M40X Toxhiba.
  I spent several hours on the Toshiba site this morning trying to find the specifications of this model.
  Unfortunately my laptop broke down.

  I was told that the motherboard is cracked and I can access is no longer at the computer.
  I do not have a note card and none of my writings gives this information.
  It's a computer 15 "laptop with CD/DVD player, Intel Centrino, SRS Trusound, Microsoft XP.

  I need to know the size of the memory and RAM and anything else if you think relevant.
  Thank you very much. Issyb

  Hello

  There are many different models of Equium M40X.
  Numbers so much more would be needed to determine what components are installed.

  Usually, the model number should be placed at the bottom of the unit.
  Check this box and post it here!

• I forgot my itunes data and my device is disabled

  I forgotten my itunes information and my device is disabled

  Hello. Visit this link, if it is disabled because the wrong password If you have forgotten the password for your iPhone, iPad, or iPod touch or your device is disabled - Apple supports

• Equium M40X does not work properly after upgrading the BIOS

  OK, well... I'm not a computer scientist, but I have a bit of trouble on my hands and I don't know where to go for the right help, so I came here.

  Today I started my lappy to confront an illuminous Green Office... not all it is green just of great spots here and there. Happened to me before, but it disappears after about 15 minutes, but today his guarded it usually hours and is still as he.

  I looked everywhere on the net for a possible fix but nothing helped, even though I've heard somewhere that an update of the BIOS might do the trick, so natually, I did... I came here and searched for my Equium M40X, found, downloaded and installed the latest version...

  but now I have a screen with a resolution of half of what it should be, it went from 1200 x 800 or something like that... to 1024 x 786 and I always get the green screen problem... the program toshiba provided for the update of the BIOS does a backup file (BIOS. (BAK)...

  I can't restore the old BIOS would set the screen resolution, but I'm just helpless as to how I go about it. I find the file, but I have no way to open/run it

  I've had this laptop for about 2 years now, I know probably just getting old and a bit tempermental, but if theres no way you people out there can help, I would much apreciate it :)

  Thanks a bunch - Ash

  Hello

  I Don t think the biosupdate is the reason for the reduced screen. It does not sound like a software thing, but rather a hardware malfunction.

  Is your normal screen during startup? If so, I'd say just remove your existing display drivers and install the new. But if it s like you described then it must be a hardware problem and the machine should be checked by a technician or at least a service partner.

  Would be better if your bring your machine to an ASP for a checkup of material.
  If you need assistance to find the ASP closest, try this link (the ASP index):

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Welcome and good luck

• Driver missing for basic system devices and the battery for hp Pavilion dv6-2174tx issue

  I have a hp dv6-2174tx with no. WT464PA #ACJ and recently installed 8.1 windows 64 bit. I installed various updates Windows update but still can't find the drivers for the following...

  Bus PCI 4, device 0, function 3

  Bus PCI 4, device 0, function 4

  Bus PCI 4, device 0, function 1

  and some unknown devices with location:

  on PCI Express Root Complex

  on Intel PM55 Express Chipset LPC Interface Controller - 3B 03

  Also my battery does not load from 49 percent. It will show "plugged in, not charging", if I remove the charger, it will start to unload and when I plugin the charger it will charge you up to 49%.

  Help, please...

  Hello:

  Here is the driver for the base system devices.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-75510-1&cc=us&DLC=en&LC=en&OS=4063&product=4172062&sw_lang=

  I'll take a guess on the unknown device...

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3688870&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_125640_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  If this does not work, I need to display the hardware ID's for devices that need drivers.

  To find this info, please follow these steps...

  Go to Device Manager, find the other devices category, and then click the device that need pilots.

  Then click on the Details tab in the upper part of the device window.

  Now, you see a drop-down list of property and it is set by default to the Description of the unit.

  Drop down on it and select the second item in the list (Hardware ID).

  After the first string of characters you see in the window.

  I don't know what is the problem of battery, so I can't help you with that.

• Tecra M2 PTM20E 'network controller' and pilots 'base system device '.

  Hello.

  I can't find drivers "network controller" and "base system device" Please tell me the exact name of the driver and the place for these drivers to download, I already checked under tecra M2 section but can't find any, please help.

  My operating system is windows xp

  Not for my machine model is toshiba tecra M2 PTM20E

  If I go to system information then I see problem thing it shows

  PCI\VEN_8086 & DEV_1043 & subsys

  Concerning

  Hi search this forum - tecra m2 - to 'base' or "yellow exclamation" and see my post that will sort you if all goes well.
  I don't know how to tie a link in this forum for you take directly to her.
  Posted by jarviei.

• HP Elitebook 8570W: driver problem: other devices - device base system and unknown device.

  Hi guys,.

  After doing a clean update on my HP elitebook 8570W I had a few unknown devices in my device manager.

  The first is a device called "base system" in PCI Slot 2 (bus PCI 36, device 0, function 1). I tried everything in my ability to determine what is this device and what drivers to install, so far without success.

  In the same section. other devices, there is another unknown device on PCI Express Root complex that gives me the same headache.

  I hope you guys can help me understand this.

  If you need further information, I will be happy to provide that.

  Kind regards

  Didier

  Hello:

  The base system device is certainly the JMicron card reader needs the driver, not the alcor one.

  You need this driver...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5257503 & swItemId = ob_124666_1 & swEnvOid = 4158

  If the driver above does not installing it automatically, try to install manually.

  To manually install the driver, go to Device Manager, click the Base system device.

  Click the driver tab.  Click on set to update driver.   Select her browse my computer for driver software option and find the folder of the driver that was created when you ran the file.

  The file is located in C:\SWSetup\sp63637

  Make sure that the include subfolders is selected and see the driver installs like that.

• Enumerate devices OR and get information about the device C / C++

  Hello

  I use using NI_DAQmx.  How to find and enumerate devices OR and obtain information about each device listed in C / C++?

  I am implementing a dynamic configuration allowing to access hardware OR on our system.

  I need to get logical device names, for example "Dev1", and then find what device OR, for example NI 6008, is associated with each device name.

  Thank you.

  -Neil shore

  If you just read the device information while you use DAQmx properties to achieve what you need:

  To get the names of all the devices in your system:

  DAQmxGetSysDevNames

  To get the product to a given device number (each product has a number of unique product in accordance with the reference C DAQmx help, for example, the USB-6008 case is 0x717A):

  DAQmxGetDevProductNum

  If you need to actually define the names of devices or whatnot, you would then focus on the System Configuration API.  I've never really used this outside of LabVIEW, but the Readme indicates he has CVI supports so you might be able to make it work.

  Best regards

• HP dv6810us 'Base system device' problems AND MORE!

  Hello!

  I have a problem I have been struggling with for several months now. I do not know what is happening and am puzzled because. I will describe what is happening as well as I can and expect an answer.

  My laptop is a:

  Laptop HP Pavilion Entertainment PC model DV6810us. I run Vista, of course.

  I had this laptop for my 16th birthday a year and half ago. As expected, it worked like a power all the time. Around my 17th birthday, he began to have some overheating problems. Attaches easily with some canned air.

  However, soon after, I started to have some other, more distinct problems. The first was, on start-up, I've received an error message indicating that the module of HPwinmx (sp?) had stopped working. A few weeks later, I started to receive alerts from Windows with "new hardware found". Specifically, three system of Base and an IEEE 1394 controller devices. At the same time as these physical alerts, my ports series and s-video stopped working, my cd player, as well as my multicard reader.

  At this point, all attempts to reinstall the drivers for those devices were unsuccessful.

  Needless to say I was due for a while on what was still working. There is not enough money to get the extract. Sometimes, at the start, all these devices would be online for no apparent reason. I reasoned that the material must be end - no melted connections or shorted wires. It must be in the drivers.

  Last Thursday, my laptop has informed me that I had no speakers, microphone or headphone jack. Being a music and a drug of Hulu, which could not support. I decided the best way to solve this problem would be to back up my files to an external drive and wipe my laptop to a factory state using System Restore HP. Well, I just finished that about 01:30. And now, nothing, and I mean absolutely nothing changed. Same features, same problems, etc, etc.

  I cracked her open to find internal damage. I don't see nothing, for what it's worth. =/. A crossed the CMOS and BIOS for info. No change. However, when I look at my startup journal, he told me what PCI bus are turning back errors. I have been unable to pause and see what he said, and the information was retracted before I could read.

  I couldn't be more confused about what is happening here.

  For the love of God and all that is holy, just WHAT is going on here?

  ---------

  For reference, here are the details on errors for three basic system devices:

  Description:
  Windows has detected a new device attached to your computer, but did not find the driver software, to make the device usable. Each device manufacturer typically includes the driver from a CD that comes with the device, or for download on its Web site. Your device hardware ID is PCI\VEN_0180 & DEV_0843 & SUBSYS_30CF003C & REV_12.

  Signature of the problem:
  Problem event name: PnPDriverNotFound
  Architecture: x 86
  Hardware ID: PCI\VEN_0180 & DEV_0843 & SUBSYS_30CF003C & REV_12
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?link...3&clcid=0x0409

  Description:
  Windows has detected a new device attached to your computer, but did not find the driver software, to make the device usable. Each device manufacturer typically includes the driver from a CD that comes with the device, or for download on its Web site. Your device hardware ID is PCI\VEN_0180 & DEV_0592 & SUBSYS_30CF003C & REV_12.

  Signature of the problem:
  Problem event name: PnPDriverNotFound
  Architecture: x 86
  Hardware ID: PCI\VEN_0180 & DEV_0592 & SUBSYS_30CF003C & REV_12
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?link...3&clcid=0x0409

  Description:
  Windows has detected a new device attached to your computer, but did not find the driver software, to make the device usable. Each device manufacturer typically includes the driver from a CD that comes with the device, or for download on its Web site. Your device hardware ID is PCI\VEN_0180 & DEV_0852 & SUBSYS_30CF003C & REV_12.

  Signature of the problem:
  Problem event name: PnPDriverNotFound
  Architecture: x 86
  Hardware ID: PCI\VEN_0180 & DEV_0852 & SUBSYS_30CF003C & REV_12
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?link...3&clcid=0x0409

  Description:
  Windows has detected a new device attached to your computer, but did not find the driver software, to make the device usable. Each device manufacturer typically includes the driver from a CD that comes with the device, or for download on its Web site. Your device hardware ID is PCI\VEN_0180 & DEV_0832 & SUBSYS_30CF003C & REV_05.

  Signature of the problem:
  Problem event name: PnPDriverNotFound
  Architecture: x 86
  Hardware ID: PCI\VEN_0180 & DEV_0832 & SUBSYS_30CF003C & REV_05
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?link...3&clcid=0x0409

  Most certainly. The cost of a new motherboard is going to be at least $ 250 for you and this is simply too much to spend for a repair. Your parents may think differently. A new motherboard is about $150 online (not of HP they charge more than double that) and labor is about $ 100 to $ 150. You would need to find a reliable repairperson or there are several good online, too.

• Equium A210: Drivers XP for base system device, modem

  I need to find drivers for base system device?
  What is c?

  Need drivers for the modem device and bus audio high defination.
  Can someone help me?

  Hi mate,
  Just a quick question: have you already checked the drivers Toshiba and Downloadsite?
  I found all the drivers you need then please check the following site and choose / Download your drivers:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Welcome them

• Equium M40x screen: warranty issue

  Hello

  I've only had my Equium M40x for a week or two, and there is a very small fly which managed to crawl under the screen and to die in the middle of the screen. It is not huge, but it is very annoying, especially because I have not used outside and I got it for a short period of time.

  This kind of thing is covered under warranty? Any help appreciated.

  [Edited by: admin on 17 July 05 20:11]

  Hey Kevin,
  I doubt if this is covered under warranty, since it is not a component malfunction or failure.

  I recommend to contact your original provider and explain the situation to them as a first action plan. Well, they may be happy to exchange the phone for you.

  Otherwise, you call the closest to the Agent of Service Toshiba and ask them to quote you to remove dead insects. Of course, this can be done by an authorized service center or you will void your warranty.

  Good luck

• HP probook 6570b: 6570b hp Base system device and unknown device

  I have hp 6570b with os win 7 Professional 32 bit.it appear in Device Manager that there is a need driver software.it shoes Base system unit hardware and unknown device...

  Hardware ID base system device

  PCI\VEN_197B & DEV_2392 & SUBSYS_17AB103C & REV_30
  PCI\VEN_197B & DEV_2392 & SUBSYS_17AB103C
  PCI\VEN_197B & DEV_2392 & CC_088000
  PCI\VEN_197B & DEV_2392 & CC_0880

  Unknown device hardware ID

  ACPI\HPQ6000
  * HPQ6000

  Hello

  Should be below card reader driver.

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5212928 & swItemId = ob_115197_1 & lang = to & CC = US

  And HP 3D DriveGuard on the following link.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5212928 & swItemId = ob_110813_1 & lang = to & CC = US

  Kind regards

  DP - K

• HP Pavilion dv8-1099eo: device Base system and unknown device drivers Windows 7 Ultimate lack

  Hello

  Since a new installation of Windows 7 64 bit it is has little material without driver on all simply not recognised. Here is the hardware ID's I hope someone can help get this sort? Laptop computer runs much slower with the CPU it has. An upgrade from 4 GB to 8 GB of RAM is useful?

  1. base system device

  PCI\VEN_197B & DEV_2384 & SUBSYS_7001103C & REV_00
  PCI\VEN_197B & DEV_2384 & SUBSYS_7001103C
  PCI\VEN_197B & DEV_2384 & CC_088000
  PCI\VEN_197B & DEV_2384 & CC_0880

  2 - system base unit

  PCI\VEN_197B & DEV_2382 & SUBSYS_7001103C & REV_00
  PCI\VEN_197B & DEV_2382 & SUBSYS_7001103C
  PCI\VEN_197B & DEV_2382 & CC_088000
  PCI\VEN_197B & DEV_2382 & CC_0880

  3. base system device

  PCI\VEN_197B & DEV_2383 & SUBSYS_7001103C & REV_00
  PCI\VEN_197B & DEV_2383 & SUBSYS_7001103C
  PCI\VEN_197B & DEV_2383 & CC_088000
  PCI\VEN_197B & DEV_2383 & CC_0880

  4 - unknown Device

  ACPI\ENE0100
  * ENE0100

  Thank you

  Michael

  1, 2 & 3 is listed under "Driver-storage" JMicron card reader  ACPI\ENE0100 should be ENE CIR Receiver Driver under "driver-keyboard, mouse and input devices.

  On your page of Support here:

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-DV8-1000-entertainment-notebook-PC-series/4011373/model/4040272#Z7_3054ICK0KGTE30AQO5O3KA30R1

• Pavillion dv 9074cl: drivers missing for coprocessor and Base system device

  I have a Pavillion dv 9024 cell cl. OEM OS is Windows XP. I improved by doing a clean install of Windows 7 (64-bit). Miss me now drivers for 1. System of base and 2 device. Coprocessor. Are they necessary? If so, how can I find and install the drivers?

  Hello:

  Here are the links to the drivers you need for these two devices...

  Coprocessor:

  This package provides the driver for the NVIDIA nForce Chipset in the notebook models and operating systems.

  File name: sp36079.exe

  BSD:

  This package contains the driver for the Ricoh 5-in-1 card reader for laptops models and operating systems.

  File name: sp34639.exe

• "$RECYCLE." BIN"and"System Volume Information"hidden folder created in each drive

  I got 15 HP r014tx Notebook in which "$RECYCLE." BIN"and"System Volume Information"folder created in each player automatically hidden name. It didn't get deleted if I try to remove it. I use McAfee Anitvirus come with pre-installed with 30-day track.

  I want to know how to remove this folder "$RECYCLE." BIN"and"System Volume Information"hidden folder name.

  rhl_yadav,

  It is IMPORTANT that you do not delete these files. They are very important to the operating system.

  Instead, you can hide:

  • Open the Options folder by clicking the Start button, clicking Control Panel, appearance and personalization, and then clicking Folder Options.
  • Click the view tab.
  • Under Advanced settings, make sure that "Show hidden files and folders" and "Hide protected operating system files ' are not checked, and then click OK.

  * TechWars *.