Equium M40X: WLan card drivers do not work
Hello
I just installed fresh WXP and I can't find the drivers wireless Internet. I found 3 or 4 drivers, but the device still does not work.
No idea where to look or what to do?
See you soon,.
Bilas
What do you mean with still does not?
You see the wireless network card if you enter in the Device Manager?
Is there a yellow exclamation next to the WLan card?
Usually on the Toshiba driver page you will find all necessary drivers also WLan card drivers. I can t believe that this driver doesn't work.
Tags: Toshiba
Similar Questions
-
Satellite M40X: Internal card reader does not work
My internal card reader does not work. I think that I have not yet installed the driver, or may have other reasons, I don't know. Please show me how to find and install this driver.
Thank you!
Can you please check the Device Manager and tell us if any unknown device is listed there?
-
Equium L40 - 156 - WLAN indicator sometimes does not work
Hello people - someone has an idea wha it is combat?
I can't find a similar problem anywhere. The led for wireless works sometimes not - so I have to go to network connection and turn Cap wireless manually. -It lights not light but allows me to access the internet.
This happens for a few weeks and then all rights itself for a few weeks.
Then it happens again.Hello
Do you mean this happens sometimes, but in most cases, you can activate the WLan correctly?
First to activate the WLan, you must move the antenna switch WLan on WE (don't forget that it was operated correctly to the right) and you I use the FN + F8 key combination.
This allows in general the WLan.I don't know why the WLan antenna switch is not working it is perhaps sometimes s a hardware problem; m e.g. loose connection or the switch was not moved properly who knows
It might be a good idea to ask a technician for a verification of switch WLan... -
Tecra 9000: SD card reader does not work with XP
I've made some progress on this issue, it seems that Cardbus devices cannot share IRQS, although the main problem is that FFDFB200-FFDFB3FF memory address is shared by the SD card controller and device memory SD card. Unless we find a way to edit the registry to resolve this conflict of memory, the simple answer is that the SD card reader does not work under XP.
I think that it would take a major surgery of the register or re-writing of drivers to move the address of memory used by the SD card device, I always work on this for now.
Can someone support Toshiba or Toshiba Marketing explain to me why my Tecra T9100 has a "Designed for Windows XP and Windows 2000" sticker on it, when Toshiba does fully support XP on the 9000 series?
David
[Edited by: admin]
Hi David
Unfortunately, I n t think that you will find here a Toshiba marketing person or other departments. It is ONLY a user to user forum.
What you say, it is simply NOT true.
The Tecra 9000 was delivered with 3 different OS.
It was delivered with Windows XP Pro, W2k and Win98. You can order all the images of this Toshiba home Toshiba service partner. That's why Tecra 9000 does support Windows XP!
Tecra 9100 has been bundled with Windows XP and Windows 2000 and also supports Windows XP!Of course, there are different models with a different hardware configuration, but all supports Windows XP.
I put t know why you get this error message or why you cannot use the SD card, but I guess you don t use the image of Toshiba. That's why you installed your operating system isn't properly. Because you are a newbie you don t know the Toshiba all the driver installation must be done in the right order and all Microsoft QFEs must be installed also.
As you can see you must pay attention to many important things if you want to manually install the operating system.
Good day
-
Satellite C850-B635 and Win7 - card reader does not work
My laptop came with windows 8 and the card reader was not working
but I installed windows 7 64-bit, downloaded all the drivers on my laptop, but the card reader does not work now.I downloaded a driver called card reader controller, but it did not work as well
I don't know if there is a problem or there is a driver should I install and I don't know.
Please help me solve this problem.In my windows Device Manager, these devices is not recognized:
* PCI simple communication controller
* SM Bus controller
* Unknown DeviceI tried searching in my page to download drivers on the Toshiba Web site but could not find these
Please help me make my card reader works again.
ConcerningPost edited by: domaking
For me, the matter is simple, and the reason why the SD card reader is not working, it's just a driver compatible isn't installed.
My theory seems to be correct, given that the SM bus controller and PCI simple communication controller appear in Device Manager and I suppose that one of these devices belongs to the player/controller of the SD card.I think that you should simply install this Realtek card reader controller that I found on the page of the Toshiba UE driver
http://Support1.toshiba-tro.de/Tedd-files2/0/CARC-20130924161048.zipIn addition, you must install all the other drivers Win 7 as well as Toshiba tools available by Satellite C850 series.
Very important is the chipset driver, USB 3.0 driver (Win 7 has this port driver to control the USB 3.0), display driver. etc.
Not very essential tools are Bulletin Board, product information online Reeltime, etc. This tools additional don t improved the performance of the laptop so its up to you if you want to use these software components
-
DV6 7303ef: SD card reader does not work
Hello, everyone,
I have problem, SD card reader does not work. Laptop HP dv6 7303ef, windows 7 64 bit envy. When I don't put SD card to laptop card slot computer no response.
What drivers I shoud install/reinstall or do something else?
Reagardings,
Jokubas
Hello
Try the driver from the link card reader.
http://ftp.HP.com/pub/SoftPaq/sp56001-56500/sp56166.exe
Kind regards
DP - K
-
Product name: HP 15 Notebook: my card reader does not work - Mute red light does not
My card reader does not work
It happened several times after the upgrade to Windows 10
It may work once or twice after the upgrade, but when there is an update from HP
My antiverious is Kaspersky internet security and it is compatebale with windows 10
Also, the Red mute botton does not work but the function works.
your opinion and your support is appreciated
Product number: L9N79EA #A2N
Product name: HP 15 laptop
Windows 10 House only 64-bit language
Hello @KhaledMorcy,
I understand that you are having a problem with your card reader and wanted to help you!
Have you tried to use Windows Updateto search for the drivers that are compatible with Windows 10? You can consult this site too: products HP - where can I find drivers Windows 10 and software for my model?
If you have problems to install the drivers, you can use the tool on the following site:
Open the Windows Update troubleshooting tool
It is possible that the drivers are not available for your product. If this is the case, or the drivers you found do not work, try to use the solutions on this site to work around the problem and let me know how it goes: how: install and update drivers in Windows 10
Also, check out the following document, as it can help to solve the problem for you:
HP laptops - use and troubleshooting (Windows 8) memory card readers
Please let me know if this information has been helpful by clicking the thumbs up below.
Have a great day!
-
driver Ricoh SD card reader does not work after recovery/vista
Hello
I have toshiba laptop with vista professional.
I did the recovery on computer
Once the recovery sd card reader does not work.
Yes, I did:
Downloaded latest driver ricoh xd card disk image
installed
restarted
.. .but still does not work
does anyone have a solution for this?
Thank you, klemen
You update your copy of Windows as directed by my last answer?
I tried to download driver Toshiba but it seems that there are no downloads for Windows vista for your specific model.
http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=EUCheck the Device Manager for the entries in the card reader under "ATA/ATAPI IDE controllers" and "SD adapters.
Double-click on the devices to see their properties. On the general tab, note their descriptions and 'device status'. In the Details under "Ownership" tab select "hardware ID" note the entries under "value".
You can try to install the drivers built into Windows Vista
1. in the Device Manager, click on your PC
2. click on the menu "Action" "Add legacy hardware. Click next in the Add Hardware Wizard.
3. check the box before "install the hardware that I manually select from a list (Advanced)". Click Next.
4. under "Types of common hardware", select "IDE ATA/ATAPI controllers '. Click Next.
5. under "Manufacturer", select "Ricoh company.
6. in the title of 'Model' select your description of the appliance as shown in Device Manager.
7. the full wizard.There are several Ricoh xD-Picture Card controller, you can try them all and see one that works.
-
Built in SD card reader does not work
I recently installed Windows 7, now the built in SD card reader does not work. Before, I was able to insert the card into the slot and would open a drive. No records for accommodation of readers appear on my computer.
You have installed the Windows 7 drivers for the card reader?
I go to the computer manufacturer web site and download the appropriate drivers.
-
My built-in memory SD card reader does not work on Windows 8
I installed Windows 8 on my new Acer AspireOne AO756 and the SD card reader does not work. I looked for some drivers and drivers Acer only give x 64 for Windows 8, but I only have x 32. Everyone knows about this problem, and if so how to solve? Thank you
Hello
I understand that the casting of card reader does not work on your laptop.
1. you get any error message?
2 have you tried with different memory cards?I suggest you follow the steps mentioned below and check if it helps.
Method 1:
You can try to run the hardware and devices Troubleshooter and check if it helps.
a. press the Windows key + R, type Control Panel.
b. type troubleshooting in the search bar, click Troubleshooting.
c. click on hardware and sound, click hardware and devices.
d. follow the steps in the wizard to run the troubleshooter.Method 2:
You can download the driver for the reader from the link below and install it in compatibility mode.
http://Acer.supportscentre.com/driver-of-Acer-Aspire-one-ao756-Windows-7-32-bit.html
You can follow the link given below to install the driver in compatibility mode.
What is program compatibility?
http://Windows.Microsoft.com/en-us/Windows-8/what-program-compatibility
Make the programs more compatible with this version of Windows
http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows
Hope the helps of information. If you have questions related to Windows, please do not hesitate to post, we will be happy to help.
-
Satellite X 200 and Windows7 (32 bit) - card reader does not work
Hi all
I hope someone can help.
My X 200-219 has been recently upgraded to Windows7 and although it works well (better), the card reader does not work.Do I need a driver installed?
Various looked but can't find anything obvious?Bravo and thank you
DBHello
Try to install THIS driverplease.
It is Vista 32 bit driver for digital multimedia card reader. I hope that it will work.
Send comments.
-
Satellite P200 accidents + message: graphic card driver does not work properly
Hello
hope that this issue has not been covered before, but I've owned a Satellite P200 for 3 years now, and this week, it crashes all the time.
When it started going down he gave me a few messages in the sense of "your graphics card/driver does not work properly and windows will be arrested to avoid damage.
It has progressed to the point where now when I turn it on, I have vertical lines running down the screen and the screen flashes on and outside. Within 20 seconds, it restores the BSOD - 'there was a problem and windows will be arrested. Error Page_Fault_In_Non_Paged_Area"then stops.
I ran a system restore but the problem remains.
I have a feeling that my graphics card is toast. Is this good? Are there any other options to try? Thanks in advance for any answers.
Matt
Hello
Sounds like the GPU problem.
But try the graphics card driver update.
Use the most recent driver for your graphics card.In addition, clean the fans of portable computers.
Dust and debris could prevent the cooling fans to turn with the best speed and this could lead to a higher temperature which would lead to overheating.
Use a jet of compressed air. I also use it and it helps to get rid of dust and debris.If this is not enough, then a problem of graphics chip would be possible.
-
1 hp Pavilion Dv7-7002el
2. Windows 7 64 bit
SD card reader does not work
Thank you
Welcome to Brunn.
Try to run this driver.
Let us know how things will go.
REO
-
SD card slot does not work on Windows Vista
I just installed Windows Vista RC1, which has just been published
Just about everything works except the secure digital memory card slot.
Until I installed Vista I ran the Compatibility Wizard and he said a few things that may not work, but the one that stood out was "SD Memory Card Format Utility.
I guess that's why the memory card slot is not working?
Anyone know how to operate? This isn't the end of the world because I can use the docking station, but his practice which he just work directly at the exit.
Any help would be great.
Thank you
Maybe the new operating system Vista doesn t include the compatible driver for the SD card controller.
Right now the Vista is not supported by Toshiba because this OS is not official on the market. -
Qosmio X 70 - the SD card reader does not work
I upgraded to 8.1 win a moment the card reader does not work. Nothing happened when I put a card inside. I tried serveral. I changed the driver to a new from the homepage of Realthek - nothing. What can I do?
Can you please tell us what card reader device status in device (storage controller) management?
Furthermore, what you have upgraded your machine following the instructions on http://www.toshiba.eu/innovation/generic/windows8_1-message/?
Maybe you are looking for
-
MAPI Smartphones blackBerry connection failed: can not sync DM with torch more
I updated the software to OS 6.0 Bundle 2949 DMWhen I try to sync, I get the following error Failed the MAPI connection: if it please run outlook with the 'outlook' selected profile and try againI have the correct outlook profile selected. I could sy
-
How to remove emails dublicate
How to remove emails dublicate. I just installed Outlook 2013 on my moms pc, it was windows live mail before (using pop3). 2013 Outlook is defined by using the same e-mail account but with IMAP. When I exported the mails from WinLiveMail to Outlook 2
-
Cisco AIR-LAP1041N-E-K9 does not not with WLC 4402 version 7.0.116.0
Hi all appreciate your support for a problem I started to deal with today. I have a Cisco WLC 4402 running the 7.0.116.0 version and it's great to work with 25 Cisco 1252 access points. We received a new 20 Cisco 1041N APs today and I installed one i
-
I am running Windows 8.1. I am trying to download music for free but get a download error. Something was wrong. Give him another chance. If it happens again, let know us by entering the error below to xbox.com/errorhelp code so that we can investig
-
Add button of tabular form a line can open several rows?
HelloI use apex 4.2I create tree on page when when I click on any node tabular presentation open and display reports record.Now, I want, in my article a tabular presentation contain a selection listMy requirement is when I click on any node tabular f