Equium M40X - WLan connection drops when using in the other room
Hello
I'm using the SATELLITE M40X series PC laptop and using TG585 ADSL2 + Modem / 802.11 g Wireless Router.
Wireless connection works fine if I use the laptop in the room even when the wireless router is pluged but if I bring my laptop to another room and then disconnected just conection.
I am living in 3 flat bed room and room are right next to each other on an equal footing.
* Note: * I use apply desktop PC as well and is not in the same room where the wireless router is pluged, desktop pc has no problem with the wireless connection.
Any idea?
Thank you
Hello
I think that the reason for this problem is that you WiFi signal is too weak in other rooms.
You can try to change the WiFi channel and may also try to disable Wlan energy saving
These parameters may be changed in the Device Manager-> card Wlan-> properties-> Advanced tab.
But to be honest I m not sure if this will help you.
I have a similar problem with my Toshiba laptop not
The WiFi signal is too low in my other room there are two walls and it s clearly perceptible for me when the WiFi signal is ok, and the WiFi signal is too weak.
Tags: Toshiba
Similar Questions
-
My pro iPad connects to the WIFI, but loses connectivity to drops in use. My other IOS devices (iPhone, macbook, etc.) do not have this problem. Ideas to solve?
Hello BrooklynWM!
I definitely want my iPad to stay connected to the Wi - Fi connection while I use it. Thanks for posting that other iOS and OS X devices have no problem with the connectivity dropping. We can try a few things.
Would first go through the steps listed in this article: If your iPhone, iPad or iPod touch connects to a Wi-Fi - Apple Support Network
Then if it does not help, you can check network settings with this: recommended for the WiFi routers and access - points Apple supported
After trying those, if you still see the drop connectivity, make sure the iPad Pro is updated with iOS 9.3.2 and check to see if the connection when you are in a certain place, time, or one event happening elsewhere in the House.
Best regards.
-
When using on the part of the family can they others besides Organizer individual payments?
When using on the part of the family can others besides the Organizer make individual payments without using the card of the organizers?
Family sharing makes it easy for up to 6 people in your family share each other iBooks, iTunes and App Store purchases without sharing accounts.
"Pay for purchases with the same credit card families and approve kids' expenses directly from the device of a parent." And share photos, a family calendar and more to help keep everyone connected. »
-
Error 907: This connection cannot be used with the VZAccess Manager
original title: error message appear on my screen
I get this error message appear on my screen every two seconds:
"This connection cannot be used with the VZAccess Manager.Error 907 "
Hello
Disable/remove your Verizon Wireless software or contact Verizon for help with this error. Posts like this occur generally when third-party utilities are used to manage connections and issues must be resolved by the Distributor, because they are often specific to that software.
Verizon support suggest that you go in the Options Internet/Control Panel and on the Connections tab, check the option "never establish a connection" is selected.
Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org
-
IM related to Adobe Creative Cloud, but I can't connect. When I run the apps, says that I don't have license, license does not work.
Your subscription to cloud shows correctly on your account page?
If you have more than one email, you will be sure that you use the right Adobe ID?
https://www.adobe.com/account.html for subscriptions on your page from Adobe
.
If Yes
Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud
-Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
-ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp
-http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
.
If no
This is an open forum, Adobe support... you need Adobe personnel to help
Adobe contact information - http://helpx.adobe.com/contact.html
Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">===>
-Select your product and what you need help with
-Click on the blue box "still need help? Contact us. "
-
I changed my password but cannot connect. When I reset the password they send an e-mail to my other email account, but there is no text tell me how to change it. He repeats to me just 'loading '.
frustratingIf you are referring to a Windows Live account, you can get help here: http://www.windowslivehelp.com
-
How to monitor connections dropped and rejected on the PIX Firewall / ASA?
I need to monitor the SNMP OID of the connections dropped and rejected on the PIX and ASA firewalls. Is this possible?
If this is the case, what SNMP OID should I monitor?
Syslogs and Netflow (introduced in version 8.2) are your options.
No MIB can give you the numbers of conn.
PK
-
Adding file names when using "combine the files supported in acrobat.
Adding names of files when using "combine the files supported in acrobat.
Is this possible?
Either as a note at the bottom of each page or a note on the print?
Without having to write or copy and paste the names of files in the PDF by hand?
As in "automatically"?
What it is for:
I do guides step by step for some software for computer magazine.
I am taking screenshots of the software and they are sent to the art director as a bunch of .tif files to be used for layouts.
I need to be able to show him where to put the numbers (1,2,3 etc) for steps-by-step and where he can cut the screenshots.
I am therefore files .tif Guide to the artistic director. Using Acrobat 9 Pro I can easily combine all the .tif files into a PDF with the extension of the shell "Combine" supported files in acrobat.
And using the comment & markup tools, I can easily ad numbering, arrows, important areas and so on.
However, these guides often include a lot of screenshots, so it is important for the Artistic Director to be able to quickly identify each screenshot. And for that he needs the name of the original .tif file to follow the screenshot in the pdf. So that when printed out the pdf and made his page layouts, there no browse and compare a pile of screenshots without a name.
When you combine files in Acrobat format (in flat PDF rather than a portfolio), you will get bookmarks for each document referencing the original file name. If they are not displayed, click the button in the dialog box Options combine to turn them back on.
Since you're combining a series of pictures, you'll find yourself with a bookmark for each page - so the value seen initial of your PDF "bookmarks and page Panel" to file on the file > box properties dialog and you have close to what you want. Write the names of files in the footers is possible but requires script to extract the bookmark names and page numbers, then write a watermark on each page.
-
I have two printers installed on my laptop, only appears. The Epson Workforce 600 is connected via a usb cable, the other is a wireless network. I reinstalled the software of the printer (Epson) and it shows in printers and devices, but it is not the list when I go to print something. When I select "Find a printer", it gives me a list of computer icons.
Hello
Check with Epson support, their documentatiion online and drivers. As it's Epson OEM
responsible for the proper functioning of the printer and their drivers provided.Good luck, you need to update or reinstall the latest driver.
Epson - Support us.
http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp?BV_UseBVCookie=YesEpson - support from Europe
http://www.Epson.co.UK/support=============================================
The main issue is probably the drivers, but these can help:
Add or remove a printer
http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printerSolve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problemsOpen the printer Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-TroubleshooterFind the manufacturer's Web site
http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-websiteFind and install printer drivers in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-driversI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Satellite Pro L300-156 - WLAN connection drops every 12 hours
Hello!
I have a short model "Toshiba Satellite Pro L300-156" (PSLB1E).
The system state is:
I used the recovery CD (to install Windows XP and other software on this CD).
I've upgraded to the latest version of the BIOS (1.50, 10/07/2008) for my laptop and I downloaded all updates for Windows XP.
I installed the latest WLAN driver for my WIFI (Realtek RTL8187B) card.The problem is still there:
Every 12 hours (exactly on the minute!) drops connections.
Not only the Internet, but the local connection.
It is even a kind of matrices.Both a connection to a local computer and "mIRC" (ssh/telnet-program) to "PuTTY" (program-chat-IRC) says "network error caused abortion of software".
These ping connections not, they die instantly in a tenth of a second.
Hello
I guess it can be caused by a 3rd third party tool that was installed on your laptop.
I mean it of really strange that disconnected EXCATLY after 12 hours of use.
"I have goggled a bit for the message: network error: Software caused connection abort."
And found that this error is displayed if the Windows network code decides that your network connection is dead. This will happen when you remove the cable network Ethernet-connected computer, or if Windows has any other reason to believe the entire network has become unreachable.I think you should check the settings of your WLan router. My router refresh / disconnects after 23,59 hours to ensure that the IP address has changed.
-
Equium nDraft Wlan connection - RESOLVED
Hope this story helps someone out there in the land having connection problems wireless. Writing on behalf of my Toshiba Equium loving daughter.
I upgraded Oct last millennium to a new Vista desktop PC, computer laptop, Wi - Fi router and broadband.
Router is a D DIR635 - Link which is nDraft; the PC is also activated nDraft.Cannot connect PC. Toshiba laptop connected instantly as he does for her BT Home hub back in Nottingham. Discovered new pilot on Ralink, downloaded, auto hunted the old wireless card and installed the new, workgroup PC. Bought Dell computer laptop to use throughout the House which connected instantly. Hunkey dorey everthing!
One night him refuses to Tosh connect but can see everyone elses router in the street but not one 2 feet farther. Takes what it home works very well on the BT Home Hub (but not in a Lake District wified). So, can't be too bad should be simple, but several weeks of pulling hair (Nothing in any case) no solution. The frustration is identical to all the forums I've visited!
One night us hit on the idea of the transmission channel, the D-Link is very sophisticated, it is set to Auto and search/transmit between 1 and 13. Tosh laptop computer watch property pilot is set to 10 with no option to change which seemed strange. The BT Home hub in Nottingham should be happy with the current driver being channel 10. There was also the option of RESTORATION of THE PILOT we did, the ability to change the channel between 1 and 10 is also check back as solved the problem of Wi - Fi!
Why what happened?
We believe that the Tosh connected to their website downloaded the latest driver and hunting the old one.
Before that the original pilot never gave us the option to restore because there was only a working driver.
So be careful when someone says downloaded the latest driver, often it is best to go directly to the website of material; not really on Auto search tell you, you have the last AND check that you have not inadvertently accepted an updated driver that can be causing new problems.Interestingly, given the sophistication of the D-links of the BT Home Hub is facing with both pilots Tosh - luck with the channel number?
Best regards, xtopher (the dad) and Vicki
Marine you're the King!
Thanks for sharing this with us!
-
Satellite T110-11U: WLan connection dropped and very slow performance
Hi people,
I use a Satellite T110-11U running windows 7 Home premium.
After having initially was very satisfied with its use, it now becomes more and more frustrating to use with wifi, with connections dropped and very slow performance.
I have updated the BIOS and think I have updated all drivers wirelss, but could be the problem. It seems that wireless, software of management is at fault because the networks are detected, but not clinging.
Any suggestion or tips to try will help save my sanity!
Thanks for your help.
John
> have updated the BIOS and think I have updated all drivers wirelss, but could be the problem.
If you need to make sure that you use the latest WLan driver.
The driver can be downloaded here:
http://APS2.toshiba-tro.de/WLAN/The laptop uses the Realtek RTL8191SE of WLan card.
Please also reset the settings of the Wlan router. I had a lot of problems with my WLan and after the reset of the router, performance problems disappeared. -
Internet connection drops when I turn on the laptop
I use a computer laptop dv7-7250us HP Envy, running windows 8.1. All my software is up-to-date. In the last month, everytime I turn on the laptop, the internet connection drops. Troubleshooting of HP operation resets the wifi adapter. It's boring run the troubleshooter in the mornings. Any suggestions on what I can to prevent that from happening.
I have Intel Centrino Wireless - N installed 2230. I went out to the Intel Web site and most recent driver.
Hello
I rolled back the driver in Device Manager, and now I'm able to connect automatically when I turn on the laptop. The driver that works has been dated to August 2013. The Windows update in June for this caused driver wifi whenever I turned on the laptop.
-
Local connection delay when using ksoap2
Hello
I'm new to the development of apploication of blackberry. I write this in reference to the below mentioned link.
I am applying in which I can download a XML from a web url and download data to URLs using webservice. The Web service uses ksaop2 and my code is similar to the code in the url above. I am able to download data in my 9800 Simulator, but whne I run cod file into another system, it shows error like "connecting Local time out after 120000' Someone please help me on this. Also, the application runs slowly. I add deviceside = true for MDS. I searched a lot and could not able to solve this problem.
Please help me ASAP
Thanks in advanc
Thank you for your answer Simon.
I solved the problem. The problem was with the configuration of MDS. When I start the MDS, the command prompt was starting and outputs instantly without any error message. I have gone through several forums and all and atlast I know that the JDK installation had some problems. I corrected which and when I set the classpath to do this, the application works well.
I am posting this because I spent about 10 days to fix this and I hope that maybe this post will help someone else who is facing the same question.
Thanks for all your replies.
-
Original title: Shared network problem
I am trying to use a shared network, configure as follows. My computer connect wireless to my router. My PS3, however, seems to be really slow when connecting wireless to the router and is at a proper speed when connected via ethernet. So, I have my PS3 connected to my computer with an ethernet cable. I put the wifi connection to be shared. Next, I set up my PS3 to connect to cable internet. Has gone through the steps and connected properly and at full speed too. However, there is a problem. My PC guard 'give up' connection to my router, while remaining connected to the PS3. I have to manually connect to my router again, regardless of the connection automatically option. Almost as if my PC is to use ethernet for internet access, (which he won't get that which is connected to the PS3) and so it loses the wifi connection. This abandonment happens around every 5 minutes or more.
Is it possible to keep my PC connected to my wireless router and still be connected to my PS3 through ethernet to connect my PS3 using my PC?The problem seems to have 'fixed itself. I tried messing around with the connections that would not work even the bridge. Then I've switched back to ICS and did not have a disconnect since then.
So the problem is now resolved, but don't know how?Whatever it is, I am very grateful for your help Manasa, it is well appreciated!
Maybe you are looking for
-
Disable function keys will not be
I have a laptop windows 8.1, and when I go into the menu of the BIOS and disable keys action, it does not work. I tried to save her and stop the PC several times but it just won't work. All solutions?
-
.. .is a preserved journal of last time computer was turned on and connected?
-
How to replace the CPU on Inspiron 3521
------------------Information System------------------Operating system: Windows 10 home only 64-bit language (version 10.0, 14393) Language: English (regional setting: English) System manufacturer: Dell Inc.. System model: Inspiron 3521 BIOS: A12 Pro
-
Get the update error 80070490 in Windows 7 OEM (diskless)
Some time ago, I bought my PC with windows 7 Home premium installed OEM dealer. Because my windows is OEM, I don't have any drive for her. Recently, I've been doing error 80070490 , every time I try to download updates. I tried the Windows analysis t
-
cleaning windows rigstry and temporary internet files
Hi guys * today im bought a new Professional edition ccleaner and it offer to a registry clean then advise you that while I have a bad history with Advanced systemcare?