Equium M50 shows black lines on sceen followed to blue screen

Similar Questions

• INCH BLACK LINES DOWN THE SIDES OF THE SCREEN OF MY LAPTOP SINCE THE INSTALLATION OF WINDOWS 7 NEED HELP... PLEASE

  Ive just installed windows 7 on my copy of vista 64-bit. the thing is tho now my office is not whole screen on my hp laptop. It was fine with vista, but I am new to windows 7 and do not know what to change. Ive got two black line on both sides of my screen about an inch in size. HELP PLEASE

  Right click anywhere on the blank desktop (not on an icon), and then select the screen resolution.

  Under the box with the image of the screen the middle button label resolution with a value in the button X y. click on the arrow and is the slider at the top? The highest option "recommended" on this subject.

  If the second answer is, the graphics card no doubt is not installed properly and needs a update driver because he did not interview the screen to get his abilities properly.

  If this is the recommended option resolution corresponds to what you believe the display is capable of. Slide this setting and select apply and see if the black bars and the image fills the screen.

  An LCD has a fixed number of pixels wide and high, and has a specific ratio. The standard reports are 4:3, 16:9 or 16:10. With black bars or the other side, it is very likely, the screen is a ratio of 16:9, but the graphical output is 4:3. Some stretch to fit other screens the black bands.

  Any setting other than the good for the screen will produce a soft image with a loss of sharpness.

• Black Line through the middle of the screen, is growing day by day.

  Hello

  I was wondering if you would be able to help me solve this problem.

  My HP Omni 120-1034 desktop PC was working fine until there is a line thin lack 2 weeks appeared in the middle of the screen horizontally past.  It's getting darker and larger as the days go by. I just reinstalled the graphics driver, but which is not helping.

  Help, please. Thank you

  Sounds like the display panel which as you can imagine, is hard to get an all-in-one. Certainly, on a laptop we would connect to an external monitor, but yours doesn't have an external monitor port. Replacement screens are about $130 on eBay.

  http://www.eBay.com/ITM/new-HP-Omni-Pro-110PC-20-LCD-screen-Assembly-widescreen-HD-CCFL-M20001-L03-/171258040164?PT=US_Laptop_Screens_LCD_Panels&hash=item27dfc64f64

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Vista, hanged, followed by blue screen then cannot perform the normal startup.

  Product

  Windows

  Problem

  Stop unexpectedly

  Date

  07/02/2011 19:52

  Status

  Solution available

  Signature of the problem

  Files helping to describe the problem (some files may be is no longer available)

  Additional information about the problem

  Windows

  Problem

  Video hardware error

  Date

  07/02/2011 19:52

  Status

  Not reported

  Description

  Signature of the problem

  Files helping to describe the problem

  Additional information about the problem

  Hi Alfredlee,

  ·         What is the brand and model of the computer?

  ·         What is the exact error message on blue screen?

  I suggest that you update the display drivers and check if it helps.

  See the links below for more details on the update of drivers:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  In addition, Open the event viewer and look for any error messages/codes.

  See also What are the information contained in the logs of the event (Event Viewer)?

  Hope this information helps.

• Computer slows down and freezes followed by blue screen.

  My computer has been slowing down and stop seemingly randomly, lately, sometimes even resulting in a blue screen. I was wondering if I could get some help here.

  I am running windows 7 64 bit on a lenovo y580

  Intel core I7-3610QM processor 2.30 GHz CPU

  installed memory 6.00

  After a restart of the blue screen, I got the standard error message "your computer has recovered from an unexpected shutdown.

  and resembled the bugcheck found this

  ---

  The computer was restarted after a bugcheck.  The bugcheck was: 0x0000007a (0xffffffffc0000185, 0 x 0000000070230884, 0xfffff6fb40000020, 0xfffff68000004a80). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 080115-38204-01.

  ---

  some help would be appreciated as it happened a lot recently.

  Download the official tester of WD here: http://support.wdc.com/product/download.asp?groupid=612&sid=3&lang=en&print=y.    Run all the tests.  I'd be surprised if you do not have to FAIL as a result.  Understand that these are WD asking its customers to guarantee to run tests to prove that WD should replace their dirves.

  54 degrees C is too hot.  Mine 32 tracks.  The high temperature is just another symptom that you say it's a failure.

  When a player throws a bad sector, it is likely to have more to come.  Yes, there are routines to 'fix' sectors defective, but given the cost of a new disc and the benefits of the most recent, it just makes no sense to fool around with a piece of material that might be causing a lot of headaches

  Everything simply good judgment says that you invest time with the help of a failing drive.  Get off your data when you can't always.  Buy yourself a replacement.  Probably less than $100. They are really not so difficult to change.  Tips: When you buy, make sure it is a 7200 RPM drive.  Buy the so-called OEM drives, they are exactly the same but less expensive because you are not buying the package.  There is a very noticeable difference in performance between the most common 5400 and 7200.  Your current drive is a 5400 RPM one.

  From the data above, you almost 750 G.  It seems that 500 would do the trick.

• Re: Equium M50-216 - lines across the screen

  Hi my Equium M50-216 has lines across the screen and low who go up and down the screen.
  There is no picture it s just white.

  If I plug it into an external monitor I get a fine display on the monitor is so the screen is defective or something else?
  I think that the inverter is ok because it of bright and not dull.

  See you soon

  I agree with Luke.

  If the image on the external monitor is ok then the graphics card should be ok.
  If an FL inverter would be defective then everything would be visible, but just a little more dark and as behind a fog

  In your case, it looks like a display problem

  I think you should ask a technician for replacement laptop

• My iPhone keeps having more than 6 lines by the top of my screen

  my iPhone 6 s more ceases to be lines at the top of my screen how to fix

  Hi Nicky,

  Which model did you - your subject line 6 more, the text says 6 s more?

  If you have a 6 in addition, there are reports more and more a problem showing flickering lines at the top of the screen. See http://ifixit.org/blog/8309/iphone-6-plus-gray-flicker-touch-death/

  (Electronics 6s is arranged differently)

• My mac pro book I can not connect present vertical lines and sometimes it turns into a dark blue screen

  Mac pro book

  cannot open a session

  vertical lines sometimes change a dark blue screen

  It came once and then the screen went crazy with different vertical lines

  When I try to sign in with my password it initiates, but then it does nothing

  You need to get your MacBook Pro to the Apple store as soon as possible MacBook Pro: distorted video or no video issues - Apple Support

• Trace image invert the colors, showing the black lines in white on black background, helps!

  I used the feature to trace of image for the drawings to the mark several times without any problems.  Today, it is worship the colors, the black lines are now white and white background is black. Help?

  Also for some reason today when I would stick a picture that I copied from Photoshop it would stick much more than the art Board and original. No idea how to solve this problem, or why she is acting funny today?

  menusplus,

  When things become suddenly strange, it may be interesting to try to list.

  The following is a general list of things, try when

  (A) the question is not in a specific file,

  (B) you have a printer installed, connected and turned on if it's a physical printer (you can use Adobe PDF/Acrobat Distiller as a printer by default without the need to have a printer on, of course you will need to specify when you really need print on paper), and

  (B) it is not caused by problems with opening a file from external media (see below).

  You tried/made some of them already; 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically preferences might be corrupt); ((5) is a list in itself and 6) is the last resort.

  If possible / there is, you must record a current work first, of course.

  (1) close Illy and open again.

  (2) restart the computer (you can make up at least 5 times);

  (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);

  4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible), for CS3 - CC you can find the file here:

  https://helpx.Adobe.com/Illustrator/KB/preference-file-location-Illustrator.html

  5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);

  Even worse, you can:

  (6) (check the box to delete the preferences), run the cleanup tool (if you have CS3/CS4/CS5/CS6/CC) to uninstall and reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html

• HP Officejet Pro 8620 shows a black line on scanned documents

  I have an Officejet Pro 8620. Just bought two months ago and everything was fine. I scanned just, however, an element through the feeder and it has a verticle black line subject to halfway, going down the whole page. What can I do to fix this? This is not the case again using the dish.

  The question that you see is caused by a small spec on the glass of the scanner ADF, thin glass just left of the main bed.  Clean this area as on the solution three of the document here.

  I found that shining flaslight parallel to the glass of the ADF can highlight the spec, it may be difficult to see.

• Selections showing upward as black lines

  Hello

  Whenever I have select something in Photoshop it does not appear as a moving dotted line, but as a solid black line.  How can I change to a moving dotted line?

  Thanks for your help!

  -Amanda

  It seems that not all OpenGL functions in your video drivers are fully functional.

  First, check the web site of the manufacturer of the video card you have in your computer for updated drivers.

  If updated drivers do not help, as a solution, you can try to change the OpenGL settings in the section Performance Edition - Preferences - (for example, try Basic under the button Advanced, or just disable OpenGL entirely).  Remember that any changes of these parameters that you do requires that you stop and restart Photoshop to try it.

  Good luck.

  -Christmas

• Satellite A100-003 - flickering screen then shows black alone

  My Toshiba has been flashed with the latest available v6.00 BIOS and has a geforce go 7600 gpu.
  About 2 weeks ago the screen started to Flash and loud gray lines have appeared, momentarily, in the days that the problem has increased in frequency and the screen shows black only, but the backlight is turned on.

  If the LCD screen stays off for a few hours it works again, but after awhile the same behavior occurs. More I connected to an external monitor and everything works fine. Any ideas?
  Also I would ask, in case I have to change the screen LCD which is currently (15.4 @ 1280 x 800) would be possible to replace it with a higher resolution as we shape the Tecra line (15.4 @ 1680 x 1050)?

  Hello

  > Also I connected to an external monitor and everything works fine. Any ideas?
  This would mean that the graphics card is ok and the problem is caused by another party. Otherwise, the external monitor would show the same behavior

  If the following parts likely to be affected:
  Cable - LCD
  UPS - FL
  -LCD itself

  If another LCD would be difficult to say because only a technician of the laptop can give you 100% sure answer but is important s has the same size of screen (15.4) and the same type of connector. A higher resolution might work, but there is no guarantee in this regard.

  So before doing something wrong ask a technician for assistance if laptop screen would be compatible.

• Equium M50-192 - startup problem

  I have a recently purchased EQUIUM M50-192 who developed a problem starting, a week after the purchase. To try to put the following happens
  Press the button power
  Turn on the light appears
  H/D light access appears
  CD-ROM flashes twice
  Then cut the power

  It passes through this sequence also if I open the lid, which suggests that the pc is in standby, IE opening the lid starts above sequence, as if you press the power button / stop.

  The same happens to a power supply (shows, seeing attatched and battery charge indicator) or only to batteries, also tried with battery but running.
  Have tried boot boot from CD via the F12 key and power at the same time but no luck with that, as mentioned above, I think the computer think it is somehow sleep and does not need to access the restore normal startup sequence. Can't find anything in the documentation re this implies a fault. Currently may not resume as collateral as abroad with out the paperwork he's come up with, for the next 6 weeks.

  Any ideas?

  Thanks in advance

  Hi, have you tried to remove the battery and then put back? Is also the adapter work correctly is the status light indicate a complete change?
  If you still not the laptop so that it starts then you don't have much choice but to the send it to Toshiba for investigation.

  Richard S.

• thin horizontal black line down page what scan on HP Officejet Pro 8600 more

  I've owned an HP Officejet Pro 8500 and scan was perfect.  I recently bought a HP Officejet Pro 8600 Plus.

  When I scan from the ADF HP 8600, I get a thin (several pixel wide) black along the lower edge of the analysis that results.  This line will be sometimes slightly twisted or appear only through half of the page, in which case, it tends to become thicker towards the edge of the page).  According to me, this line is an artifact of the analysis of the edge at the bottom of the original document.  I think it is to show where the bottom edge of the page was when parsing.  If the document is that a little offset, then the black line down will be a little twisted, probably following the edge of the page.  This issue is consistent and reproducible.  It is in the mode "Scan mail" and in mode 'Scan To Network Folder.

  When I scan from the flat bed, I get a very narrow black line along the side of the analysis resulting very superior, but the background seems in good condition (although I have not tested this widely).

  These fine black lines occurred when scanning the HP 8500.

  I wonder if there is a setting to adjust it, or if it is a firmware difference between printers needs debugging.

  Hey KenAlker,
  
  There are a few things I want to check if you have lines when scanning using the 8600. I see that mention you that lines appear both through ADF and flat glass. There may be something both of the glass sections used by this printer, but more often that otherwise, this isn't the case.
  
  I would check if the printer is connected to a surge protector. If this is the case, then try plugging the 8600 in a direct outlet. Often the surge protector can cause this problem appears because the printer has a built.
  
  Also, try a hard reset:
  * Unplug the unit while the
  Disconnect the other end of the wall socket direct
  * Wait 30-60 seconds
  * Plug the unit to the top
  
  Also, try to take a look at the steps in the document found here.
  
  I hope this helps.

• Vertical black line on Portege 3500

  My P3500 screen suddenly started showing a vertical black line with interference on the right hand third of the monitor. The line disappears after about 15 minutes, but still the interference. I plugged an external display that shows no display problem.

  Hello

  If the monitor external don t show any problem, to certainly show a malfunction. Try contacting the Service of your country partner. Explain exactly what is happening. I'm sure they will know immediately what the problem is.