Similar Questions

• Dell Studio 1537 built-in Microphone Webcam not working not

  Hello

  I'm trying to use Skype and talk to some of my old friends. I've updated the driver for the built-in webcam already and both pilots of his present. I checked all volume control. Note that this problem occurs with all programs, not only Skype, I tested it with the webcam software that comes by default on the computer. For each program, I checked all the which the microphone is being used and they all use the built-in webcam microphone. I am running Windows Vista and bought this laptop, the Dell Studio 1537, in last May. I wonder if there is another driver or utility that I could try, or if it may be a more serious problem with the wiring.

  Thank you

  Mace brand

  Brand webcam works correctly when you run its dedicated software?

  If in order to ensure that you do not load the software when you use a webcam application. The application will automatically access the drivers.

• Built in webcam not found on the computer.

  Hi, back for a while that I had to have it replaced my computer screen. After that it has been replaced, my webcam not working not. He said that there is no webcam. Before that the screen had to be replaced, it works beautifully. What could be the problem and how to fix this? Thank you for your help.

  Hi Randalynf,

  Please answer a few questions to refine the question.

  1. What is the brand and model of the computer?

  2. When you say "screen is replaced", hear you screen has replaced for a new one? What was the exact problem with the monitor?

  3. what happens when you try to access with the Webcam software that came with the computer?

  This problem normally occurs when there is no problem with the driver for the Webcam device software.

  I suggest you follow the steps below to see if that helps.

  Method 1:
  

  Step 1: Find material webcam

  Take a quick moment to visually inspect the top of the screen of your computer. Look closely, you should see a small lens at the top in the Center, if your computer is equipped with a webcam. Some models do not come with a webcam and the area where the webcam would normally be resident is replaced by a small plastic cap.
  Often, there are small holes near the top center of your screen. These holes are for the microphone or other sensors and do not contain any webcam.
  • If your computer lacks a built-in webcam, you must use an external USB webcam.
  • If your computer is equipped with a built-in webcam and you can't use it, go to step 2

  Step 2: Find and use the Webcam software that came with your computer

  Try to access the webcam that is preinstalled on your computer.

  If you can't find and open the webcam for your computer software, then go to the next step.
  If you have found the software of the webcam and it opens and you see a picture, then finished. Your webcam works.
  If you found webcam software and it opens, but you can't see the video in the main display window, restart the computer and try again.
  If the problem persists, use the troubleshooting section "video does not appear in the webcam software.
  Method 2:
  
  If you are able to find the Webcam on your screen and you cannot view the video using the software installed, you may need to update the Webcam drivers for more later.
  Read the sections "If you have problems with your webcam' in the article and check the results.»
  • Help app and webcams camera
  • http://Windows.Microsoft.com/en-AU/Windows-8/camera-app-FAQ

  Hope this information helps. Response with status so that we can help you.

• DV7-7250 we: webcam not working not

  Hello

  My webcame stopped working all of a sudden. I don't know why. I searched online solutions, but can not find.

  I would be grateful if someone could help me with this problem that I need to use Skype quite frequently.

  Thanks in advance

  This might help:

  http://support.HP.com/us-en/document/c03430151

• Satellite Z830 - webcam not working not not because upgrade W10

  I have a ultrabook z830 and the webcam is not working since upgrade W10. I tried to install the software of webcam of toshiba and also one that comes with the laptop, but when I try to start it it just says: webcam of initialization failed Please restart the application. I uninstalled and reinstalled several times. The webcam was working fine before W10 upgrade. Can someone tell me please in the correct direction for the drivers of webcam. I tried several unsuccessful.

  See you soon

  Paul

  Message has been modified: subject changed Portege Z830 to Satellite Z830

  Hmmm, someone changed my title for portege z830 instead of the z830 ultrabook

  I don't think my laptop to be a portege

  When I list my part number in the drop-down menus, it shows me that

  Computers
  Ultrabook
  Satellite Z830
  PT22LA - 00T 001

  I can't find the words portege anywhere on my laptop

• Satellite M645-S4050: built in camera is not working properly

  My built in camera does not work properly.
  It doesn't have any kind of effect and it captures the images and videos as though a kind of thermal camera is performed.

  Also a few videos that I upload to youtube like this.
  I did research on a response, but can't find it, please help me.

  Hello

  You have this problem only play recorded videos or don't get it to play ANY movie?

  Have you tried a new installation or update of the graphics driver?

• U300s Webcam not working not

  Hello

  I just brought a U300s ultrabook and the webcam stop working. When I use Skype, the only thing that appears on the video configuration is SOURCE of POS and the message "it is not possible to start the video. try closing other programs in use", but there is no other program using the webcam. When I try the internet sites called test my cam, etc. etc., the web cam seems not to work. I installed the cam properly and drivers of energy management. No luck. What could be? If anyone has had this problem please help me.

  Thank you

  Hian,

  Welcome to Lenovo Community!

  Have you tried Fn + Esc to activate the webcam?

  Please check if these knowledge base articles to help you:

  Webcam does not work - ' could not open the camera!

  Lenovo S10-2: Problem Webcam

  Kind regards

  Cleo

• Webcam stopped working says insert USB after that reinstalling but being not recognized help pleae

  I have a new computer, webcam stopped working, I reinstalled the software screen indicates it has been reinstalled ok but when I try to use the camera it says on screen no device connected to the usb. help please.

  Hello

  1. what operating system is installed on your new computer"? XP, Vista or Windows 7?
  2 do you see anything unusual (yellow bang) in Device Manager?

  Assuming you are using XP (because the thread is in the XP category), I suggest you follow the steps below.

  Step 1: Use Device Manager to find the hardware changes
  Use Device Manager to find the hardware changes. After your computer search the hardware changes, it can recognize the USB device connected to the USB port so that you can use the device.

  To check the hardware changes, follow these steps:

  a. Click Start and then click Run.
  Note If you are running Windows Vista, click Start and then use the search box.
  b. type devmgmt.msc, and then click OK. Device Manager opens.
  (c) in Device Manager, click on your computer so that it appears highlighted.
  d. click Action and then click Scan for hardware changes.
  e. check the USB device to see if it works.

  Step 2: Remove and reinstall all USB controllers

  To remove and reinstall all USB controllers, follow these steps:

  a. Click Start, click Run, type sysdm.cpl in the Open box and then click OK.
  b. click on the Hardware tab.
  c. click the Device Manager button.
  d. expand Bus USB controllers.
  e. right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  f. restart the computer and reinstall the USB controllers.
  g. plug in the removable USB storage device and perform a test to ensure that the problem is solved.

• Inspiron 1525 integrated webcam not detected when the laptop is open, but works when it is closed

  I see that the webcam works (blue light is on I can open less then to halfway and see the desktop and a part of the computer in photo. then open more than half and get error webcam not detected.)

  Help please

  Hello

  Check with Dell technical support, online documentation and drivers and their known forums
  problems and solutions.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  -------------------------

  Help generic camera:

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• S2716dg - built-in speakers do not work

  I got a new S2716dg for Christmas. It took some adjustments, but now I love it (the gamma is much too high out of the box).

  Just one problem, the built-in speakers don't work at all. I have correctly set the audio source and reinstalled the Nvidia drivers with no luck. I can plug the headphones on the monitor and hear the sound, but the speakers do not work.

  I tried to call telephone technical support, but the tag of express service for this monitor does not work if the time-out to have my abandoned call was twice as long. Is there a way I can call directly for assistance to the Canada without having to go through the routing of calls?

  See the S2716DG User Guide. The S2716DG not built in speakers.

  Audio output port side is only for headphones. OSD (On Screen Display) - Audio only adjust the headphone volume.

  

  The bottom line audio output port is for external speakers.

  

• Built in microphone does not work on hp g60

  Original title: on my hp g60

  my built-in microphone is not working now, after I installed windows 7 ultimate... How it will be resolved... Please help...

  Hello

  After you update/install, you also need to install the latest version of the software/drivers for this operating system.

  HP:

  http://WWW8.HP.com/us/en/drivers.html

  Or you can also ask in the Forums of HP's Support.

  http://h30434.www3.HP.com/

  See you soon.

• Integrated motion Eye webcam not working not not after I clean Windows 7

  Integrated motion Eye webcam not working not not after clean Windows 7 64-bit installed (Sony VAIO VGN-TZ21XN/B)

  you need to install the software and special drivers for the webcam.

  If you do not, find them in the sony web site.

• I have Win7/64. But I don't know, how I have my USB webcam to work. The cameras settle the program will not work. Please help me!

  I have Win7/64. But I don't know, how I have my USB webcam to work. The cameras settle the program will not work. Please help me!

  Thank you more:
  Steve Vidacs /Hungary

  On Monday, November 5, 2012 20:14:15 + 0000, istvanvidacs wrote:

  I have Win7/64. But I don't know, how I have my USB webcam to work. The cameras settle the program will not work. Please help me!

  You must have installed a Windows 7 64-bit driver (if it exists)
  for this. Do you have? Otherwise, navigate to the web site of the camera
  manufacturer, search, download and install it.

  Ken Blake, Microsoft MVP

• built-in webcam not found in the Device Manager, Samsung r710 laptop, windows 7

  I have a laptop Samsung R710, who settled with Windows 7. The laptop came with a built-in webcam. I was not able to get a piece of software to recognize the camera. I did a system restore. Updated the drivers. Visited the Samsung website for updates. When I opened the Device Manager to see the drivers for the webcam, webcam not found in Device Manager.

  Any help to fix this would be greatly appreciated.

  Thank you, I must admit to thinking in the same direction you... buy a separate camera or wait until he is more under warranty and have a quick look at the wiring around the hinge.

• Error "USB device not recognized", but nothing is plugged in and my webcam is not working. It says webcam not connected

  Error "USB device not recognized", but nothing is plugged in and my webcam is not working. It says webcam not connected

  Hello

  Since you said it worked very well recently, I'll try to do a system restore at this point in time.

  See this link: http://windows.microsoft.com/en-us/windows7/products/features/system-restore?SignedIn=1

  In addition, see the response of the Meghmala and follow the instructions listed there. I think that the three method might be the best of the bunch for you, but they have all the right steps.

  See this thread: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/usb-device-not-recognized-in-windows-7/8106a712-a13e-4ca5-b82e-c3961cc254b1