Equium P200 power up used

Similar Questions

• Equium P200-1ED is able to power external USB devices connected on it?

  (1) is anyone able to confirm if the Toshiba Equium P200-1ED is capable of powering an external USB device connected to it via one of its 6 USB ports?

  (2) what is the maximum power that the Toshiba Equium P200-1ED can provide only one USB port?

  (3) can the Toshiba Equium P200-1ED providing the power referred to in Question (2) above to each of its 6 USB ports?

  Please don t after several markets on the same subject.
  After you recommend first one:

  http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=115025#115025

• Equium P200-1ED: is it possible to use 3 Gbps HARD drive?

  Hi all

  I have a laptop Toshiba Equium P200-1ED and quickly fill capacity on the hard drive. I'm looking to upgrade to something like a 500-700 GB HARD drive.

  However, when I look around for 1.5 gb/s options I am limited to 160 GB maximum.

  Even if the current HARD disk interface is 1.5 gb/s (currently using Hitachi HTS542512K95A00) is possible to use a HARD 3 gb/s drive and P200-1ED will support it?

  I am not so embarrassed on the speed of performance, more the need for a larger storage capacity without having to get an external drive.

  Any advice would be appreciated.

  Announcement

  Hello

  Equium P200 supports the controller SATA HDD and SATA I and SATA II HDD are compatible and would be supported by the BIOS.

  You can use a disk HARD SATA II (3 Gb/s).

  But perhaps only the 1.5BGb / s (SATA I performance) would be reached.

• Equium P200 with WXP, no ACPI

  Hello

  I recently bought a new HARD drive to replace the Vista operating system.

  I used nlite to make an iso of the drivers SATA, SP2, and XP Home.
  I installed XP, SP3 and then all the drivers concerned from Toshiba. Especially the PC is fine, but I have a couple questions.

  They are:
  1 button will turn PC on or off, but not shut down the OS before turning off.
  2. when I stop XP I get the message (Win98), "it is now turn off your computer"! (Both of these may be (?) related).
  3. in eating patterns Options\Power I have only the possibility of the turn the HARD drive and monitor and then in the Advanced tab at all no options!
  4. with the exception of point 1 I have no control of the any of the other easy access above the function keys buttons. Toshiba controls are configured but do nothing!

  I studied these problems and it would seem that the APCI perhaps the corupt? I can't find any mention of ACPI in the BIOS (Phoenix V2.3). Also, I can't find any reference to ACPI in including hidden devices Device Manager! It was also suggested to upgrade the BIOS to ACPI compatible version?

  The only clues I can give, is that even if the pilot pwrsav the pwrsav driver installed OK - in twice caused a fatal error (BSOD) on the PC. To restart, as Toshiba Power Saver icon in Control Panel, but the opening gave me a Fatal Exception error message. I then restored the system to remove the program.
  In my opinion that ACPI and energy savings are related, please inform me if I am wrong. (Items 1 to 4 can all be linked)?

  XP has apparently ACPI capabilities but I can't find anything on the PC in this regard.
  With Vista that I had no problem with mentioned previously not mentioned and everything worked perfectly.
  Your help would be much appreciated...

  Hello

  It seems that the Toshiba UE driver page provide a special Win XP BIOS version 5.40 for Equium P200.
  If you are using Win XP, its recommended to use this BIOS.

  In addition, the page provides the pilot Power Saver Power Saver utility for Win XP.
  You must install both have additional food options.

  The commands and controls driver must be installed so that the functionality of the multimedia buttons.
  Hotkey Utility for Win XP manages the FN keys.

• Equium P200-1ED is capable of powering connected on USB devices?

  (1) possibly associated with my previous question - what is someone able to confirm if the Toshiba Equium P200-1ED is able to power external devices connected via its USB ports?

  (2) all 6 USB ports can supply simultaneously 6 external USB devices?

  What's wrong?

  Please notify.

  I assume you ask again for advice related to this issue:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=115026#115026

  To my knowledge, all USB ports supports the USB standard and provides 500mA.
  But sometimes a USB device requires more than 500 my and then you will have to use an external power supply for the USB device.

  Sometimes it s advisable to use a USB hub that supports clean power.

  (2) can all be used 6 USB ports to power simultaneously 6 external USB devices?
  As I said, the external USB devices possibly some 3rd would need more like 500mA and in this case, you must use an external power supply to USB devices.

  Good bye

• Equium P200-1ED - lack of card's "line-in".

  Hi people,

  I'm new to this forum, but here - I have an Equium P200-1ED running Vista.
  I use Magix Audio Lab 15 transfer vinyl to CD by using the 'line-in' on the sound card.

  Everything worked well.
  Power the computer off, one night, the next day without that an entry in the 'line-in' (there seems to be no input via the mic either)

  When I connect to the computer on the band of the amplifier (record taking) the volume of the amp reduced which suggests a short circuit on the sound card.

  My local repairman can't find a problem (but I'm not surprised with this)

  Any ideas would be appreciated.

  Roger

  What service can do is to check the functionality of the ports but not not to check the functionality with some additional software. That s not the point and Toshiba doesn't offer some support for the third party software.
  Thus, if the service has checked your laptop, I can imagine that your ports in the front are OK.
  Can you confirm this?

• Processor upgrade and Equium P200-1ED

  Hello

  I installed an SSD of 64Go and installed Windows 7 with the user and the data folders program on a SD card installed as USB key into the Expresscard slot. I also put in 4 GB RAM

  It is still slow to navigate the Web through wired Ethernet. So I plan to upgrade the processors as the neck of the bottle seems to be permanently on the processor which is a T2310 Dual Intel @1.46 GHz.

  So the question is what is the next possible CPU upgrade?

  Thank you

  Update CPU has no influence on the Internet.
  It's done.
  If you have a slow internet connection, check the flow of data to your internet provider.

  Regarding the upgrade of CPU:

  Upgrading the CPU is certainly not supported by the laptop manufacturers. But this does not mean that another CPU would not work. A lot of people here in the forum attempted to upgrade the processor and in some cases, it worked.
  It will be important to know which chipset was built in this Equium P200-1ED.

  I m not very well, but I guess that its Intel GL960 Express Chipset. Please correct me if I m wrong the chipset must support the new CPU, otherwise the new processor cannot be used.

  Page Intel ARK provide information on supported processors
  http://Ark.Intel.com/products/29830

  In addition the new processor must be supported by the BIOS. If the BIOS would not support new CPU, the laptop would not start even if the chipset would be compatible with the new processor.

  As you can see, the CPU upgrade isn't easy because of pending issues concerning the compatibility issues between different parts for laptop.

  By the way: I am wondering about the upgrade to 4 GB RAM because this device should support max 2 GB of RAM

• Updates in tempo Equium P200

  Hi new to this forum... got the Equium P200-178 since last year and everything was very well, how ever I downloaded the program Tempo which alerts me up to dates, but when I supported the update for my computer, extract the files then run update the computer some how will then says that it is impossible to install the program on my computer. Y at - it anthing I could do wrong. Any help would be great.

  Thanks in advance.

  Hello

  To be honest, if your laptop works well and stabile, you need not update. The single update can be useful, and this is the package of added value.

  By the way: you tried to install updates?

• Equium P200 - several identical directories (void) & inappropriate content

  Vista Home overcharging was preinstalled on my computer Equium P200.

  I found that multiples with the same name (sub-) directories are created over time without any input (obvious) myself.

  Different, although files may contain these directories with the same name (void) identical (subsubdirectories).

  I tried to remove the (seemingly) redundant directories (void), but over time, they reappear.

  Also, I noticed that the shortcuts/files to move or disappear from directories (void))

  For example, until a couple of days, that I had a set of favorites in a subdirectory under (my) user directory - the subdirectory "disappeared" as well as shortcuts.

  As a secondary issue, I tried different ways to test my system - system restore; Memory; Hard drive; SFC system, but nothing seems abnormal, except that-
  the System File Checker, said that she could not solve a few flaws and that he had put the details in a log file. Unfortunately, no matter what I do I can't open logfile - the system of the forbidden even if I am registered as an administrator.

  The only thing I did is to use the sine of ease of startup repair I don't know what are the implications of this option.

  All the suggestions and help would be appreciated

  concerning

  Hello

  According to your message you absolutely don't know what directories (void) this is and what software has created this directories.

  I think an application or software that is installed on your laptop can create these files/directories as a windows update does things

  In individual cases, these files/folders are only for temporal use. In this case, you can remove this
  I m using a free tool called CCLeaner. It cleans the registry of BONE and temporal files stored on the HARD disk.
  Maybe you should test it

• Equium P200 1IR running Vista 32-bit Home - no WiFi

  I have a Toshiba Equium P200 1IR running Vista 32-bit Home with a wifi problem. The wifi adapter is an Atheros AR5007EG.

  The problem I get is endangered wifi networks and laptop connects to networks I use normally.

  I tried to reinstall the connections and passwords. I know that routers are functioning as my wifi phone can connect to routers, but the laptop will not.

  I removed the battery and reset the BIOS, I removed the adapter from the list of Device Manager and reinstalled, I updated the driver and restarted the laptop.
  I can see some time the wifi router and sometimes I can't. If I can see my router named it will connect to it.

  Sometimes, he will not recognize the router but when I use the Toshiba wifi doctor and run the radar feature, you can see the router but it does not show in the network and sharing Center, although I can see on the radar option.

  Any help would be greatly appreciated.

  Hello

  You update the BIOS?
  Please do if the laptop uses the old BIOS.

  In addition, you must update driver WLan
  You said you did, but I don't know if you used the latest version of m

  Here you can download the latest Wlan drivers.
  http://APS2.toshiba-tro.de/WLAN/

• ADSL USB modem installs on Equium P200-1ED

  I have a P200 Toshiba's Equium-1ED; Model number # PSPB5E-003004KS.

  I want to use my Thomson SpeedTouch 330 - a bus powered USB USB ADSL modem - for my Toshiba Equium P200-1ED and downloaded the 4.1 version of the Windows Vista driver from this web page:

  http://www.Thomson-broadband.co.UK/codepages/Content3.asp?c=7&ProductID=471

  ... However when Vista modem driver is running, the software fails to recognize the Thomson SpeedTouch 330 ADSL modem when the guest driver software connect the modem.

  The Thomson SpeedTouch 330 ADSL modem works perfectly when used with my old laptop Toshiba/XP (which is how I downloaded the Vista driver for the modem for satellite).

  What's wrong?

  -Disconnect all USB devices
  -Remove all USB host controllers and hubs the Vista Device Manager
  -restart the laptop

  After the restart new Vista should recognize and install again the USB ports.
  Then you could try to reconnect the USB ADSL Modem.

  But have you followed exactly how describes on page installation instructions?

• Equium P200 built in camera does not work

  Hello

  I just bought this laptop with Vista. What I've noticed, is:

  construction has closed without driver and software, I do not see everything on the toshiba site.
  Has anyone else had this problem and can anyone give some advice where to find drivers and software

  Thanks stuartson

  Sorry Stuart but I cannot believe this. In my office, we have a single Satellite P200 and it's the same notebook as your Equium P200. After the first start will be analyzed the portable equipment and if the webcam is located in the driver and the software will be installed automatically.

  Are you using a recovery image Toshiba (factory settings) or your own installation of the OS?

• Equium P200 - wireless network card is not recognized or in Device Manager

  Hello

  I recently bought a laptop computer used by my friend, an Equium P200
  I reinstalled Vista and downloaded the correct drivers and everything works fine apart from a Wi - Fi connection.

  I took on the key board and checked that the mini pci card in properly installed and even tried it exchanged for another

  The system crashes to recognize that one is plugged, when you go to the device under network drives Manager only Realtek LAN is listed (which I suppose is the Ethernet Jack)

  The WIFI card is an Atheros AR5BXB63

  Any help really appreciated.

  Some unknown device is listed in Device Manager?

• Re: Equium P200-178 - what CPU for an upgrade?

  Hello

  I have the number piece Equium P200-178 PSPB2E-001002AV at the moment with Intel® Pentium® Dual - Core Processor T2080 1.73 GHz 533 MHz, I'd like to upgrade but that I can safely go with?

  I think im after the same socket as it is Socket M but how fast can I go with that I don't want to overheat it cause ill be using the same cooling system.

  Hi bdragun,

  These CPU updates is not supported by Toshiba and so there is no official list of processors, they will work in Equium P200. No one has tested the other processors in this model

  You should also read this article:
  http://APS2.toshiba-tro.de/KB0/FAQ35006D000RR01.htm

• Equium P200 1IR - update driver display

  I have been using my Equium P200 1IR awhile to play world of Warcraft. After an update the game crashes now, the screen becomes black when I'm in an area of the game where there are a lot of things. WoW advised me now, they do not support my driver who is an IntelGM965 and advised to update this.

  I tried to run a search on the site of my laptop toshiba, but it won't work. I did a search for the pilot, but whenever I have try and install anything on the laptop on the toshiba site it says that my phone does not have the ability to install.

  I have absolutely no idea if I can update my graphics driver and if so, how to do it on my laptop? Y at - it an update, so I can continue to play WoW, or as I feared I am looking to have to buy a new laptop?

  Thank you.

  Hello

  If you play world of Warcraft, I think that you were advised to update the display driver. The display driver can be downloaded from the official website of Toshiba.

  Your laptop has integrated Intel graphics card while he was correct by downloading the Intel display driver. If you can install t he due to compatibility problems trying to install manually via Device Manager. Right-click on the graphics card in the Device Manager and select Update driver. Then use the Advanced installation option where you can choose the driver directory yourself. Navigate to the folder where you saved the downloaded driver.

  After restarting the screen new driver will serve :)