Erase any of my files if I switch from XP to Vista Home Premium?
I have Windows XP and Im wondering if I install Windows Vista to Windows XP will be my files deleted because I don't want my files to be clear they are very important especially my Norton. So, I just want to know it will clear or not
Hello.
Your files are deleted or not actually depend on how you choose to install/upgrade to Windows Vista.
Basically, you have two choices: upgrade or New Installation.
-The upgrade allows you to raise simply for the windows you want without affecting your partitions of current facilities and documents.
-New Installation, on the other hand, your old installation OS completely wipes and puts the new operating system on it. Or allows the original copy on a new disk or partition must be installed.
Since you want to keep your files in the New Installation is out of the question. But to do an upgrade, it depends on what OS your market now and what operating system you want to upgrade to.
What edition of Windows XP you are running (i.e. XP, Professional, Media Center)? And what version of 'little', it's [that is 32 - bit, 64-bit]?
If you want to display a chart that shows you whether it is possible to install any upgrade or clean go here: http://windows.microsoft.com/en-US/windows-vista/Upgrading-from-Windows-XP-to-Windows-Vista
Tags: Windows
Similar Questions
-
wrar371.exe 32-bit file will work on my 64-bit Vista Home Premium?
If I go through the misery of download and install a file 32-bit name wrar371.exe, is it unzip the files with the extension .rar on my 64-bit Vista Home Premium? I.e. it will unpack files with the .rar extension so that I can possibly run video I downloaded more than a week ago and have not yet been able to view.
Stan Daniels
Please read this link for general guideline:
Abd 32 - bit 64 - bit Windows: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/32-bit-and-64-bit-Windows-frequently-asked-questionsCan I run a 32-bit program on a 64-bit computer
Excerpt:Most programs designed for 32-bit version of Windows works on the version 64-bit windows. The notable exceptions are many antivirus programs.
Device drivers designed for 32-bit versions of Windows do not work on computers running a 64-bit windows. If you try to install a printer or other device that only has 32-bit drivers available, it will not properly work on a version 64-bit windows. If you don't know if there is a 64-bit driver available for your device, go online to theVista Compatibility Center"" href = "http://go.microsoft.com/fwlink/?linkid=142444" > Windows Vista Compatibility Center
. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.
-
can I switch from windows 7 home premimum to windows 7 pro with a machine reburshied license key
You are welcome pitdweller
J W Stuart: http://www.pagestart.com
-
Cannot open BKF files on disk external usb2 (G) __a Vista Home premium
Files BKF (backup utility) comes from the previous windows xp computer
Hi David Lado.
Welcome to the Microsoft answers community site.
You can restore a backup created on a previous version of Windows (the backup file will have a .bkf file name extension) by using Windows NT Backup Restore Utility. For more information on system requirements and how to download and run this program, go to the Microsoft Windows NT Backup Restore Utility website.
To run Windows NT Backup Restore utility, you need to turn on removable storage management.
To turn on removable storage management
1. open programs and features by clicking on the Start button , by clicking on the Control Panel, click programs, and then click programs and features.
2. in the left pane, click Windows turn features on or off. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
3. Select the check box next to removable storage management to enable the feature, and then click OK.Reference article Microsoft Help & how-to: restore a backup created on a previous version of Windows
You can also consult this reminder in the Microsoft answers Forum which deals with NT Backup Restore utility: http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/38bcfe1a-9778-44ae-a583-3f1a2b1c8311
Let me know if it works. Good luck!
Hope this information is useful.
Thank you and best regards,
KKS Vijay[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]
-
I get 0 x 80070246 errors when you try to install SP1 for Vista Home Premium.
After you run the system update readiness tool, I found the following errors in my CheckSUR.log
=======================================================
Preparation of control system was updated.
Binary version 6.0.6002.22202
Package Version 6.0
2009-10-09 19:13Checking Windows Service Packages
Checking of manifests package and catalogs
Checking package Watchlist
Watchlist checking
Checking packages
Control components store
(f) clear CSI missing 0x00000002 WinSxS\Manifests\x86_microsoft-windows-msxml30.resources_31bf3856ad364e35_6.0.6000.16386_en-us_37881fc949e23021.manifest x86_microsoft-windows - msxml30.resources_31bf3856ad364e35_6.0.6000.16386_en - us_37881fc949e23021
(f) CSI Payload file missing 0 x 00000000 jscript.dll x86_microsoft-windows-writing of scripts - jscript_31bf3856ad364e35_6.0.6002.22146_none_852abf080d834b3eSummary:
Seconds executed: 1221
Found 2 errors
CSI shows lack Total count: 1
CSI Payload file lack Total count: 1Unavailable repair files:
winsxs\manifests\x86_microsoft-Windows-msxml30.resources_31bf3856ad364e35_6.0.6000.16386_en-us_37881fc949e23021.manifest=======================================================
The newspaper CBS.log itself has several types of mistakes, too. Here are some samples:
-Errors 'M²;
2009-10-09 21:10:27, info CBS SPI: from SPInstall
2009-10-09 21:10:27, info CBS SPI: could not start the etl newspaper. Continue without. HR: 0 x 80070020
2009-10-09 21:10:27, info CBS SPI: wave 0 detected
2009-10-09 21:10:27, info CBS SPI: wave 0 installation. Subset of LPs taken in charge.
2009-10-09 21:10:27, info CBS SPI: spent before due diligence
2009-10-09 21:10:27, info CBS SPI: wave 0 installation. Subset of LPs taken in charge.
2009-10-09 21:10:27, info CBS SPI: M² is not included in
2009-10-09 21:10:27, error CBS could not initialize wrapper M²
2009-10-09 21:10:27, error CBS could not define M² by default LCID of the system value-"Could not find the CixTarget Molok" errors.
2009-10-09 21:29:25, CBS Plan info: package: Package_6_for_KB954366 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.3, updated: 954366-50_neutral_GDR, current: installed, pending: the default start: installed, planned: installed, targeted: installed, limit: installed, selected: default
2009-10-09 21:29:25, error could not find the CixTarget for container package_for_kb954366_server ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.3.cat
2009-10-09 21:29:25, DpxException hr = 0 x code 80070002 error = 0 x 020109
2009-10-09 21:29:25, error could not find the CixTarget for container package_for_kb954366_sc ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.3.cat
2009-10-09 21:29:25, DpxException hr = 0 x code 80070002 error = 0 x 020109-"ILLEGAL_CHARACTER" and more "Sqm" errors-
2009-10-09 21:30:04, error CSI 00000022@2009/10/10:01:30:04.150 (F) d:\longhorn\base\lstring\lblob.cpp(2217): native STATUS_ILLEGAL_CHARACTER error of the function RtlTranscodeLBlobs expression: __rv. UcsCharacter! = (0xffffffff)
[gle = 0 x 80004005]
2009-10-09 21:30:21, error CSI 00000023 (F) HRESULT_FROM_WIN32 (582) #489176 # to Windows::ServicingAPI:CCSITransactionAnalysis_ICSIInventory:EnumDeploymentReferences(flags_=_00000003,_tlcid_=_@0x655fac0,_pszSubscription_=_(null), pszCodebase = (null))
[gle = 0 x 80070246]
2009-10-09 21:30:21, CBS WER info: generate report of failure for the package: VistaSP1-KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.0.18000, status: 0 x 80070246, source of failure: other CBS, start state: 0, target State: 4
2009-10-09 21:30:26, information CBS Exec: comprehensive treatment. Session: 30034248:1278646622, package: VistaSP1-KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.0.18000, hr: 0 x 80070246
2009-10-09 21:30:26, State of the information system sleep restored CBS block: 0x80000000
2009-10-09 21:30:26, CBS Session information: 30034248:1278646622 finalized. Reboot required: no
2009-10-09 21:31:30, CBS briefing: initialized 30034249:1690541326.
2009-10-09 21:31:30, error CBS SPI: cannot write SQM data flow for the package status
2009-10-09 21:31:30, error CBS SPI: cannot write SQM data flow for the package status
2009-10-09 21:31:30, error CBS SPI: cannot write SQM data flow for the package status
2009-10-09 21:31:31, error CBS SPI: cannot write SQM data flow for the package status
2009-10-09 21:31:31, error CBS SPI: cannot write SQM data flow for the package status
2009-10-09 21:31:31, CBS Session info: 30034249:1690541326 finalized. Reboot required: no
2009-10-09 21:31:31, error CBS doesn't have value of M² for the time of the scene
2009-10-09 21:31:31, error CBS doesn't have the m value for the build number
2009-10-09 21:31:38, CBS Session info: 30034249:748895326 finalized. Reboot required: no
2009-10-09 21:31:41, info CBS SPI: cannot install MS using the user interface. HR 0 x 80070246
2009-10-09 21:31:41, info CBS SPI: SPInstall terminating, return code 0 x 246
2009-10-09 21:31:41, error CBS didn't M² value for parameters
2009-10-09 21:31:41, error CBS failed to set exit code value M²
2009-10-09 21:31:41, error CBS didn't M² for the SKU value
2009-10-09 21:31:41, error CBS doesn't have the m value for the build number------------------------------------------------
I don't understand exactly how errors in the two newspapers are related, but my opinion is that, if I can solve my CheckSUR.log errors, CBS.log errors will disappear to, and then I might even be able to install SP1.
Any help that can be provided would be greatly appreciated.
1 person needs an answer
For what is interesting, what I ended up doing to solve my problems was to re - install Vista with the 'upgrade' option, so I don't lose any of my files or desktop settings...
After that, I had a few problems with my OS reinstalled with several (80 +) updates, SP1 and SP2 from catching up. But overall these problems were minor compared to it, that I lived just to fix some missing files.
-
I have a Vista Home Premium 64-bit, Service Pack 2 Dell. He read/won't recognise no videos HD taken with my Canon camcorder HDD21/AVCHD (MTS format). Each attempt generates a message stating "Windows Media Player may not support the file type or the codec that the file compressed. I used a Windows 7 PC, which allowed me to play the video from the camcorder and burn a DVD of the video to share with the family. I'd appreciate any help. Thank you
Information on the types of media files that supports Windows Media Player
http://support.Microsoft.com/kb/316992For better support please try the Microsoft Vista for photos and video forum instead. http://social.answers.Microsoft.com/forums/en-us/vistapictures/threads
-
sfc/scannow foud the corrupted files after upgrade from Vista Home Premium 32 bit
Hello
It is an event that I went through:
(1) recently I received a bunch of updates to Vista Home Premium 32 bit, after I did the update I decided to perform sfc/scannow task and this is the error message I got the "Windows Resource Protection found corrupt files and managed to fix them." Details are provided in the CBS.log windir\logs\CBS.log newspaper. For example c:\windows\logs\CBS\CBS.log
Repair of system files change will take effect after the next reboot.
(2) so I did restart and then try to run the sfc/scannow task once again, but I still got the same message I described in step 1 again. So basically sfc/scannow function did not repair the corrupted files.
(3) the next step, I decided to perform a repair Installation of visa which took me 10 hours to complete the task, once the task of upgrading of repair has been made and before the windows update, I ran sfc/scannow task and this time he finds any corrupted files, but after I updated windows sfc/scannow result was the same as step 1.
It is obvious to me that one of the updates of the origin of this problem, but find it me hard to pinpoint that one. So I am writing this e-mail to help and I hope that the problem will soon be solved. Please let me know if you need me to submit the CBS.log file for you to review thanks in advance.
Kind regards
Jdec9
Hello
Sorry to hear that you are facing a problem due to the update of Windows. I'll certainly do my best and get the issue resolved.
I suggest you to view update history to see which update might be causing the problem.
(a) open Windows Update by clicking Start , all programs, and then Windows Update.
(b) in the left pane, click view update history.
(c) to display more information about an update, double-click it.
Once you know Update KB number, provide us with the same for later analysis. You can also try the steps in the article and see if it helps.
You can also download the files of cbs to Skydrive.
Use SkyDrive download collected files and post screen shot/image
Hope this helps and let us know if you need more assistance. We will be happy to help you.
-
Migration to Vista Home Premium programs and files for Windows 7 Ultimate
Hi guys, I just want to know if there's no possibilities
to migrate from installed programs and files in my Vista Home Premium to Windows 7 Ultimate
--------------------------------
Also if I have Vista Home Premium should I switch to Windows 7 Home Premium too. I want to Windows 7 Ultimate!
Hello
You can upgrade from Vista Home Premium to Windows 7 Home Premium or ultimate; the choice is yours.
«Compare the editions of Windows 7»
http://Windows.Microsoft.com/en-us/Windows7/products/compare
If you go from Vista 32 bit Home Premiun 32-bit Windows 7 Home Premium or Ultimate, you can do an inplace upgrade.
The same goes for Vista 64 bit for Windows 7 64-bit
This will keep your programs and data intact.
But ALWAYS make a backup of data when you perform this type of work on your computer.
"How to do an Installation of upgrade Inplace of Vista to Windows 7"
http://www.SevenForums.com/tutorials/1818-upgrade-install-Windows-7-a.html
And before you buy Windows 7 read and check to see if your computer is able to use Windows 7 to its best advantage:
Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.
If this is not available, Windows 7 will not properly work for you.
Run the "Windows 7 Upgrade Advisor.
http://www.Microsoft.com/en-US/Download/details.aspx?ID=20
Check if your specifications are compatible for Windows 7:
"Windows 7 system requirements"
http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements
"Windows 7 Compatibility Center" for software and hardware:
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx
Windows 7 upgrade paths:
http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx
And the Microsoft Store where you can get an idea of the price of Windows 7:
http://www.microsoftstore.com/store/msstore/en_US/list/CategoryID.50726100
See you soon.
p.s. If you want from 32-bit to 64-bit, or 64 bit to 32 bit, upgrade facilities are not available.
You will need to do a clean install.
-
someone on this planet knows!
XP home sp3 can use printer/sp2 vista home premium & files on a network private wireless, but not vice versa. Vista can see xp connected on the entire map, but can not do anything with the icon (it shows the IP etc. When hovered over with the mouse). tried fix & checked all the rest including the settings found on the masses of internet sites. don't think that this problem is so widespread and not final fix?. someone must know the answer. both computers have norton 360 v6. !. two computers use internet very well through the same network switch. two computers worked flawlessly again, no repairs, no reinstall, not zero other problems ever (always ran 360 and first market backup battery).Hello
I recommend that you search/post this question on the link below:
http://social.technet.Microsoft.com/search/en-us/?query=networking%20with%20Vista&refinement=112&AC=1
b Eddie -
Vista Home Premium - function of automatic backup of files
Vista Home Premium - when I try to back up by using the automatic file backup feature, I get the error message: 0x80071A91. I tried the solutions of FixIt of MSN. No use. Any help? I use the laptop Toshiba Satellite.
-
Cdfs.vxd, the cdtsd.vxd files and the cdvsd.vxd are missing in my Vista Home Premium 32 bit system. ask if you can make me the same thing that my CD/DVD is not capable of reading/writing data discs
Hi Anirbang,
· What exactly is the problem you are having?
· You receive an error during execution of any task?
If the drive is not able to playback a disc then follow this article and see if it helps.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
Respond with more information so we can help you best.
-
Failure to restore file with Vista Home Premium
I used the Vista "backup and Restore Center" to create the external USB drive onmy backup files. Wsing windows Explorer, I can see the files and extract a single file for the data really exist on disk
I have re-installed windows Vista Home Premium and service pack 2
When I select advanced restore, then on "files from a backup made on another computer" the external drive is visible and two backups can be seen
in the next screen "select the dates to restore from" all entries of show "backup location is not available.
If I ignore it and continue the error message is 0x8100001A
I used the sdutil program to recreate mediaid.bin but restore still does not work
What to do next - any help appreciated
Teka
Hello
This is a forum for microsoft at the link specifically for backup questions below
http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads
-
How can I get my E drive working again? I inadvertently stopped a backup file and ejected from the disc without it completed stopped. Now, he does not recognize the disc. Please help me. Computer: Compaq (Desktop), Windows Vista Home Premium, Service Packs 1 and 2.
Hello
Check with the support of Compaq, their online documentation and drivers and their forums for
known issues.Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
I have problems separating records and files of the administrator and the user. My computer is a laptop (HP Pavilion dv6700), used as a home computer only by myself, I like to keep the two distinct roles, but am unable to as Vista seems to be considered as one and the same. This scenario has arisen as follows:
Initially, when I bought the laptop - approx. 18 months back - Windows Vista Home Premium was preinstalled, with the name 'Administrator' as an administrator. To customize the operating system and to use safely, I installed a user 'Renault', as a Standard account user.
After awhile, I changed the name of the Director of "Renault", for reasons I have can not remember now. This caused Vista to combine folders and files of the two "users" in one, I found difficult to deal with, that I could not operate my laptop as just a Standard user, but is still considered the "administrator." On the one hand, this greatly increased spam in my email accounts. So I tried to reset the name of the administrator as 'Administrator' itself and keep my user name as "Renault", as originally the case. But Vista me has failed to create a new user under the name "Administrator". So I created a new user under the name "System administrator", with administrative privileges. This has been accepted by Vista.
But I forgot to change the user account for 'Renault', on the Standard account, so there was BOTH administrator accounts at the same time on my laptop! I realized that now only. The net result was that all the files that I created under the system administrator user were still being displayed under the user account of Renault. A few days back, I realized this and tried to separate the files correctly, but it has not been possible. No matter what I copied the account of the user in the files under the system administrator account, the files have been copied on account of the user himself.
I tried to fix this by changing the name of the user account in something very different, AND as a Standard user. but this also does not work, as all folders and files under the administrator account system shows it as being under the user account of "Renault" only!
Then, I deleted the user 'Renault' from the list of the user, but he was not yet of any help. Whenever I tried to create a new file under the system administrator, Vista responds with the message, "C:\user\Rajaram folder is not present. Will I create a new? ", which defeat the same purpose of my tent to isolate the administrator account and the user account.
SOMEONE HELP ME PLEASE WITH A SOLUTION, - OTHER THAN REFORMATTING MY C:\ DISK AND REINSTALL VISTA AGAIN - TO GET OUT OF THIS MESS, IT SEEMS TO ME YOU HAVE CREATED AND HELP ME TO HAVE AN ADMINISTRATOR ACCOUNT AND OTHER UNIQUE STANDARD USER ACCOUNTS PROPERLY ISOLATED.I would be always grateful for a quick and helpful response.
Thanks in advance.-RAJARAM77
Thanks for your reply. It was very helpful / sorry your proposed solution has not solved my problem. Kind regards. -Rajaram77Better to delete the user account except the one that was built in the administrator account that you renamed. Before this backup all your data files of these user accounts.
Then rename the buil into account administrator as 'administrator '. Then you create another administrator account and use it and never the user built in Administrator account and leave it alone. -
batch file to unzip the files in the 64 bit version of windows vista Home premium
Hello
I'm looking to write a batch file to decompress the files. I'm working on a windows vista Home premium 64-bit. any help will be really wonderful.thanx .pdp2907
Please repost in the scripts Forum: http://social.technet.microsoft.com/Forums/en/ITCG/threads/ where script experts will be happy to help you.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Maybe you are looking for
-
Satellite L850-13D - the fan noise
My l850-13d satellite fan still works when the laptop is connected in AC mode, but in MS mode the fan only works when the CPU temperature is greater than 50º Celsius. I would like to know if this is normal or not. Thank you.
-
Is there a way to get the camera to write directly in the DCIM file to the SD card? Jon
-
Hello I have a HP Pavilion Notebook PC g6 Data sheet: Windows 7 Home Basic 64-bit Intel Core i3 - 2330 M CPU @ 2.20 GHz 4GB A-DATA Technology 1333 MHz SODIMM Intel(r) HD Graphics Family My HP support assistant gave information to install this update
-
Media Player does not not at extraction... Occurs VERY frequently
I am running Windows Media Player 11 with Vista Edition Home Premium. About every second CD I try to rip, I get the error "not responding". In fact, in this case if I am trying to rip my HD or burn to a CD in WMP. If I close and "find a solution",
-
Auidio sound is not set by default to the audio device. I tried several times to fix it, but nothing works. Olease help...