erase the numberic control

Similar Questions

• Erase the numbers using GREP?

  Hi guys,.

  Could someone help me please? I only find GREP in inDesign if Im not that clued up on it. I searched the web, but can't seem to find a way to remove the numbers from sequntial a document - is it possible?

  I essentially several documents containing some old page numbers in parentheses - is possible to use GREP to search and delete, including the media? That is to say, [1], [2], [3], etc.

  Thank you!

  Hello

  [Of course, try this: \[\d+\]

  This will find any number of numbers in brackets, including the media.

  Hope that helps.

  --

  Marijan (tomaxxi)

  http://tomaxxi.com

• Some otherwise identical digital controls have white behind the numbers, other gray

  On the attached screenshot, there are two Express Digital controls in the lower right corner.  I did the replace operation to make sure that both are the same type of control, still it white behind the numbers and the other is grey behind the numbers.

  I do not change the settings of these controls when I inserted the.  I don't see anyway to change the background number without having to build a custom control.

  The two controls appear in the same loop, are of type DBL, floating point with 2-digit precision.

  Can someone tell me why these environments is different and if there is anything I can do about it?

  You must choose the background color to change the background of the indicator.  Note that there are two color boxes in the choice of colors.  The upper left corner is for the text.  Bottom right is for the background.

• 13 Firefox does not erase the cache via control + F5 or Ctrl-Shift-R

  I just find that FF13 does not erase the cache through typing commands to reload the page. Tools... Options is clar cache, such as exit and restart FF.

  I note in particular with the CSS files (honestly don't know on the graph).

  My cache is set to 3 MB, but I see that 0 MB as well.

  I found that the problem is caused by an iframe on the page with a built-in Google map. Refresh the cache works the way you want on other pages.

• Eraser tool numbers

  There is an eraser tool on the numbers? I am tring to set up a floor plan and you must edit the shapes I made.

  Thank you!!

  Hi morgalily,

  An "Eraser" applies only to images of card ("painting") bits. Images created in number are vector drawings, not images of 'painting '. The individual forms constituting the drawing may be deleted, have their proportions (proportions) have changed, or if the path with the tool "Feather", can have their forms edited, but they cannot be partially deleted.

  

  The image shows a form of rectangle (square), inserted into the button menu forms. This form of "fixed" has a limited set of manipulations that can be applied to change its size, the width in the colours of ratio, line and fill height and orientation. The lower form consists of two rectangles, jointed together. The boundary can be set to none, but may not be partially deleted in order to eliminate the vertical line where both forms are meet.

  The form at the top right is drawn using the tool pen in shape button menu. It was duplicated, then modified to produce the revised below form. Changing the shape is done by option clicking on the limits of the form to add a new control point, and then drag the control point to a new location. Three of the control points have been added to this form and moved to produce the new shape.

  Although it is possible to establish a floor plan, it is not the easiest of tasks to perform with precision in number. Examples above produce in Numbers ' 09.

  Kind regards

  Barry

• I can't open the numbers.

  I can't open the numbers. tried to erase it, reboot and download it again, but it does not work. any idea?

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Read a yahoo email group digest is no longer jumps to the numbered emails

  Under the r26.4 by clicking on the numbered message headers made a jump directly to this email. Under the r31, he asked to open the file with (in my case) Firefox. The same email has been tested with both versions on a Win 7 machine and each has the same supplements. There is a new setting, I can't find who controls this?

  It is probably bug 974857 bug 974857 - anchor of the links works not when reading HTML emails (involving IMAP)

• I can't erase the cc, bcc, or go on a page of e-mail

  I can't erase the cc, bcc, or leave on a page of e-mail even after switching control activates / turns off at a stop position, I have the latest update.

  Your profile indicates that you have an iPhone 4 running iOS 9.2.1.  It is not possible.

  The latest version of iOS for your iPhone 4 could run is iOS 7.1.2.

  So it is not at all clear if you talk about an iPhone 4 being run an older version of iOS, another iPhone running a newer version of iOS, or perhaps an iPad (as after all this is the area of the iPad from Apple Support communities).

  Thus, without knowing all of the above, try to reset your iPhone or iPad.  Press and hold the power and home together for 10 seconds until the Apple logo appears.

• My child allows to bypass the parental control

  My child to bypass the parental control on his Macbook Air using the method presented in this video tutorial. Is there a way to avoid this? https://www.YouTube.com/watch?v=Br6wKR28jFo

  With the text of the video section, the way used by the author to exploit the single user Mode

  command line is specified; and it has been done before. Don't know if there are more recent methods

  to try to deter the child since the creation of their own Admin account to bypass the controls that

  those already discussed adjacent older sons, like this:

  How to stop a person setting up an administrative account duplicate (hackmac)?

  Although it is possible to learn how and use the Open Firmware password, to attempt to get the Admin acct

  This could also be overcome by a particular person looking to exploit a work around physical access.

  In the past, some computer models were easier to open and to perform tasks that could derail this method.

  Almost any iFixit or removable guide could be useful for a particular child or student, as a work-around.

  See suggestions on how to apply the Firmware password, as well as the means to

  block access to the material or the way to reset the admin by OS X Recovery password, in news

  OS X versions that use this partition and its utilities. It is part of the problem with the Admin

  operation, the user is physical access to the computer. And why remotely hacking is very difficult.

  • Use a password of the firmware on your Mac - Apple Support

  While I have no other suggestion (knowing that there could be a fairly simple method to work around the)

  and most have been published online for several years) I hope that someone will see & respond to your

  question with any method you can implement. Or see if an Apple Store genius bar can help you

  This question, because it creates problems. I'd be sure to make an appointment to discuss this at the store.

  If no official Apple retail Store is available, you should perhaps consider a call to Apple support or use a

  online chat. Don't forget to mention details about the build year computer, etc. & the version OS X in it.

  • Make an appointment at an Apple Retail Store Genius Bar
  • Find an Apple authorized service provider

  You can choose to make submissions directly to Apple's comments on this issue, if you find that it is not effective

  method of maintenance determined children or young adults to change their own Admin computer.

  One of the comments below links is probably more suited to this topic than the other:

  • Support Feedback

  • Products return

  Contact Apple support

  http://www.Apple.com/contact/

  Need service or support? Start your online application and we will find a solution.

  More ways to get help:

  • Contact iTunes Store support
  • U.S. iPod, Mac and iPad technical support: (800) APL - care (800-275-2273)
  • Technical support for iPhone in the United States: (800) MY-IPHONE (800-694-7466)
  • See all phone numbers around the world

  Since there is no response when I first noticed your thread, I asked guests move it more appropriate

  location for visibility in these discussions of support; so they chose to put it in the section of MacBook Air.

  Good luck in this case!

• more info on the DAQmx control task

  Today I came across an older post where I had some questions and Jeff· just Þ· Bohrer showed a good example, it's here:

  http://forums.NI.com/T5/LabVIEW/AES-single-element-queues-data-value-references/m-p/2978093/HIGHLIGH...

  I doesn't pay attention to the DAQmx task manages the part, but now some new questions of time came to my mind, I hope someone can give me some explanations...

  Usually, when I'm working with some hardware with DAQmx driver, I simply specify the channel, and I use the VI of virtual channel create for my work I want to use.

  Recently I read about benefits use MAX to previously create some global (?) of the tasks (for example a cDAQ with many modules and i/o channels) and using these tasks in a LabVIEW project. In this case I can just skip the 'Create Virtual Channel.vi', begins with the measurement with a "Start Task" DAQmx and stopping a VI 'stop the task', correct? However in the link above, the VI "Task of control" (next), first used with a parameter "commit" and during the closing of the measure, with a setting of "Cancel" (and no task to stop vi was used).

  I threw an eye using the Task.vi 'control', but the info it is not too detailed, where I can find a few more details, or maybe someone might highlight the use and benefits of this vi? Sounds a bit 'funny' aid, as for the parameter commit: "Programs the hardware as much as possible depending on the configuration of the task."

  So what is the difference between the use of the "task of control" in a code and do not use it (so when we use only the start and the stop task live)? Do we not the same behavior with the latter?

  Thanks in advance!

  Martins wrote:

  The overall task configured max subject: we conduct research, so I always just develop for our lab, we do not sell anything. However, I have some questions related to a task configured and saved to the MAX:

  • So I have a task created at MAX, I guess that this task will be usable only if I use it in a project of LV on the same PC? What if I need to move my application to another PC (but of course with the same modules cDAQ, etc., but perhaps under different numbers...)

  The task can also be used with a .exe. You can export MAX settings to a file (file, export...) .nce, and then import the settings to a new PC. If necessary you can tweek the numbers.

  • I would like to create an EXE from my code and don't run this EXE to our systems (not install). Y at - he tips that I should keep in mind when I create an executable from a project that contains a task of MAX?

  I can't think of something special. Personally, I prefer to load the name of the task from a configuration file, you can also use a control on the front panel to select the task.

  I have a feeling, when we need complete flexibility, the course of MAX isn't really practical, Yes? I want to say, if we want to for example programmatically recognize all our application materials and create tasks to ensure that all physical changes on the side of the PC in the future will not affect our code?

  I agree that you have as much flexibility, but for my applications most of the time MAX provides sufficient flexibility

  But this scenario could be documented for future users in the lab, I imagine, so what they have to do, is to recreate the overall task? What happens when we take the application as an exe on another PC and manually re-create the (I hope that quite the same) necessary global task with the same name that awaits the EXE? It works this way?

  Thanks for the very useful info!

  Edit: "Yes you can set a MAX task that includes several modules and channels so that they all have the same type of action."

  This is also a limitation compared to the creation of code depending on task, Yes? I mean, using the DAQmx 'Create Virtual Channel.vi', we can even combine for example analog inputs with for example in a cDAQ thermocouple hunts...

  No it is not a limitation, for thermocouple is entered analog. If you can combine them in LabVIEW, you can combine them in MAX.

  Edit2: I really miss other docs of type "real demonstration" of the NEITHER! I could imagine a sort of case study examples where different material handling OR would be explained... Of course we can hunt together pieces of mosaic, but a more compact image could help a lot for those who want to learn faster

  Ben64

• HP Pro Plus 6800: error 0 x, 00000057 wireless and wireless Direct properties of the Windows Control Panel printer - print a Test Page

  I have a laptop Toshiba Satellite of Win7 64 bit and a HP 8600 Pro Plus,
  update firmware and drivers about 2 weeks for the 8600 was a
  a long time I have been updated, which is connected wireless has decided to
  Direct to print Wireless Setup once the program installation, I tried to do a windows
  Print the Test Page in the printer property Panel, somewhat normal for
  set up a printer

  Under the connection of the conciergerie, I got the error message 0 x 00000057
  Under wireless direct printing, I got the same error 0 x 00000057

  After spending the time to check the settings, connections and asking
  Why? I decided to see that if I could print the docs, I print a PDF file,
  Notepad and Word documents in each application under the two
  configurations without problem.

  Under the wireless connection, I started the Web Services module
  and was able to make the impression within the Web Services Test page
  module without problem could not yet do the printing Test Page
  in the printer properties panel.

  I ran Print and Scan doctor who, to my surprise mentioned
  a conflict of Driver, I welcomed this program to uninstall the driver,
  went looking upward for the driver and the same driver was so done
  No download but to remove the driver and reinstalled the driver.
  Always error message here.

  I'm now tempted to delete a direct print wireless and see
  What happens if the error disappears, if she does not unstall all
  associated with the printer and do a clean reinstall. In case of emergency
  is there an alternative to the use of the Web Service module to the setting
  When not connected to the wireless network?

  I think that the Panel of the printer would do this (I'll watch this later

  spend enough time on it), or do I need to run Web Services to

  direct wireless installation, just think about this, otherwise I'll shoot

  a usb cable.  Maybe if I install Direct wireless on the printer control panel

  the message will disappear as the installation of the printer program, not software

  on the laptop?

  It is a minor problem since I can still print but question why!

  See other issues about this error message I thought

  spend my experience with this error.

  Always had a number of things to think and try, once again.

  If your getting this error message I would suggest trying a test page printed

  within the module of Web Service to see if the message developed.

  Could not back the driver so I removed the printer driver

  by deleting.

  19/07/2011 Date print driver
  Print driver version 26.0.0.0

  and removed software in Add and Remove software Hp also had to turn

  disable the wireless module directly on the printer to reinstall from the CD.

  Reinstalled printer/software form the CD supplied with the printer, the

  Driver date is 08/12/2009 Ver.9.0.0

  No more error in configuration.

  is the answer to the error message 0 x 00000057 or 0x00000xx

  associated with the driver? Or just the 0 x 00000057?

  Could not find a list of drivers between the driver and

  the driver on the CD.

  Will not update the driver for a good while or until I have too.

  The dates on the drivers are only about two years apart, the

  The version numbers are an issue questable.

• KEYPAD TYPE MORE THAN THE NUMBERS.

  KEYPAD TYPE MORE THAN THE NUMBERS.

  I TRIED TO USE KEYBOARD TROUBLESHOOTING VIA CONTROL PANEL. NO CHANGE WORKED.  I RESET COMPUTER AND ENTERED THE "SETUP."  THE DIGITAL BOARD IS 'ON' TO 'USE NUMBERS', REGISTERED AND LET COMPUTER RESTART.  STILL WILL NOT WORK. (WITH OR WITHOUT NUMLOCK ON).

  Is the number lock on? If so, maybe the keyboard went wrong. You can try a different keyboard.

• Tandberg Edge 95 MXP Password reset via the remote control

  Hello

  I try to reset the IP password via the remote control and still get the complaint that the password must be at least 8 characters and the number. I tried all combinaiton of 8 characters and 1 number, 8 characters and 2 numbers, 6 tanks and 2 numbers, 4 characters and 4 numbers, number 8 characters and 1 number 1 and so on. Is there something special about looking for the system?

  Thanks for the support!

  PS. When I telnet into the system, it shows TANDBERG Codec Release F7.2 PAL / SW Release Date: 2008-10-31, so I guess it is 7.2.

  Do you know if strict password is enabled or not?

  By default, that is, unless you have turned it off at some point, which will ask for a password at least 15 characters that contains 2 lowercase letters, 2 caps, 2 numbers and 2 special characters.  You can check by connecting to the endpoint using SSH or Telnet and runs the API command below:

  xConfiguration StrictPassword

  Here are the steps to reset the password to access IP on a TANDBERG MXP endpoint, I suggest that you try to use the API to change the password by logging on to the endpoint by Telnet or SSH instead of the remote control. The most recent software MXP is F9.3.4, suggest you also improve your point of termination to the latest version to mitigate the security issues with the older software. You can contact TAC and advisory security cisco-sa-20140605-openssl to get a key to unlock so you can upgrade your MXP to software F9 of reference, from there, you can upgrade to F9.3.4.

• Can't erase the history of Safari completely

  So somehow, I managed to set up the date to December 31, 2100. The only problem is that I opened YT in Safari and now I can't erase it from history. When I remove and reopen Safari it comes back. I tried to erase the history, but it did not help. However, it seems that it has disappeared from my Mac, now I can't remove it to iOS.

  There are solutions to this problem?

  Yes, I absolutely do not learned to play with the date.

  Settings/Safari/clear history and data from the Web site does not work?

• Erase the iPhone 6, iOS 10 to negotiate?

  I was in a hurry and do not pay attention to all the steps when I was preparing my phone to trade. I disabled the parameter "Find my iPhone" and then "erased all content and settings", then packaged upward and sent to Verizon. I didn't sign icloud first.

  My question is, I'm having a problem?

  No, if you have disabled find my iPhone. You can check it out by going to iCloud.com on a computer, open find my iPhone and see if your device is still on display. This it is, and it is connected to Wifi, you can select it and delete it again. It will ask you your password ID Apple/iCloud, and which will disable and erase the device. If you remove an instrument - this means that find my iPhone has been disabled. I wouldn't remove the device at this point.

  Once you are sure that Verizon is to have no problem with your device, you can then remove it from your iCloud account. But better not to do it until you get the all clear on their part. Easier to solve the problem if you are always bound...

  See you soon,.

  GB