Erase the VDR warnings and errors, how to

Similar Questions

• I bought 50 weeks to Go on my iphone and my cpu it always says I'll run out and have only the 5 GB, I had originally. They are the same accounts and idea how to fix?

  I bought 50 weeks to Go on my iphone and my cpu it always says I'll run out and have only the 5 GB, I had originally. They are the same accounts and idea how to fix?

  Have you tried signing off iCloud desktop and then signing again? If you check on the phone, does show the plan 50 GB? Are you sure that the two devices are signed on the same iCloud account?

• Portege 3440CT reinstalling the operating system and error NTLDR

  Hi all

  I have a Portege 3400 I picked up a few years ago when starting a business. The machine was made by many, and it no longer starts. I want to reinstall the OS - the only problem is that I don't have the original CD Rom drive that came with the unit. I have a portable CD player that I can plug into the USB port of the adapter, but during the taking of a boot device, it is not yet trying to look for the CD player and immediately gives me an NTLDR error.

  The only option for the boot device which does not give me the same error is when I take the network (Lan), but I have no idea how to do to set up my local network so I can use it as a source for the reinstallation of the operating system.

  Can someone help me?

  Thank you

  Manish
  Matt (at) Gen - a (dot) com

  Hello

  The error NTLDR says that your device or disk is not bootable. What OS did you use? I know that Windows NT doesn't support USB.
  Please check out this article written by Microsoft:
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;196661

  Also, I found a topic in the forum with a similar problem.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=2182&MessageID=6043#6043

  Good bye

• The caution icon appears on the status bar, and error on this webpage, page States and it may not work properly.

  Original title: Error on the page with the warning icon

  The caution icon appears on the status bar, and the page shows error and error on this Web page might work incorrectly and script on the page error

  Hello

  1. what operating system is installed on the computer?

  2. do you use the Internet Explorer browser to surf the internet? If so, which version?

  3. with what Web page, you receive this error message?

  4 does happen with a particular Web page or it occurs with other webpages as well?

  Follow the article mentioned below, if you use the Internet Explorer browser:

  How to fix script errors in Internet Explorer on Windows computers:

  http://support.Microsoft.com/kb/308260

• Mozilla firefox add-ons Manager page is not in the correct format and error in installing addons?

  page of the Add-ons Manager makes its appearance in the basic format and when I search for add ons, it shows the result, but without images (to the basic format). Cannot install them too.

  If you can, take a snapshot and post it here for us to see.
  
  To better help you with your question, please provide us with a screenshot. If you need help to create a screenshot, please see How to make a screenshot of my problem?

  Once you have done so, attach the file to screen shot saved to your post on the forum by clicking on the button Browse... under the box to post your reply . This will help us to visualize the problem.

  Thank you!

• My Bookmark tabs and frequent site disappeared from the top left and right, how to recover?

  For no reason that I can see on Firefox in the upper right corner, the bookmark has disappeared, and on the upper left tab, the tab Web sites visited more often. There is simply nothing. I can always go to the bottom of the page to navigate, but it is most cumbersom and loses all the advantages of a single click, I had. My computer is an intel windows Vista.

  Make sure the toolbars like the toolbar 'Navigation' and the 'personal bar' are visible.

  • Firefox menu button > Options
  • View > toolbars (press F10 to display the menu bar)
  • right click on empty toolbar space
  • If the missing elements in the palette of the toolbar, and then drag them to the window customize (view > toolbars > customize) on the toolbar
  • If you do not see an item on a toolbar in the toolbar palette and then click the button "Restore default" to restore the default toolbar set up

  Make sure that you run not Firefox mode full screen (press F11 or Fn + F11 to toggle; Mac: Command + SHIFT + F).

  • https://support.Mozilla.org/KB/how-to-use-full-screen

  If you are in full screen view then hover over with the mouse upward to make the bar appear Navigation and tab bar.
  Click the expand (in the top right Navigation bar) to exit full screen or right-click on a space empty on a toolbar and select "exit full screen" or press the F11 key.

• Question on erasing the HARD drive and partitions

  Hi my name is Fanta and I want to sell my laptop to someone, but I want to avoid impersonation so.
  I'll use an erasure software that will wipe away my whole HARD drive until there is no data.
  This is why I would like to know if there is a recovery on my HARD drive partition ready, and if there is a partition to the HARD drive recovery.

  Wipe tool will wipe the partition on the HARD disk. If he wipe the partition will take the recovery partition and if I need the recovery partition and I don't what will happen?

  Hello

  Generally, you won't find any recovery on the HARD drive partition. The Toshiba Recovery CD should always be supplied with the device. It must be only installed the operating system with the Toshiba drivers and utilities.
  However, if the Erase tool will also clear your partition then all files and data will be deleted.

  The HARD drive will be formatted again during the installation of the OS. If you want to use partitions on the HARD disk, you can create it in addition with Magic8 Partitions. I use this app and it of very great.

• All the icons and files with the extension .lnk and error message: "Windows cannot open these files.

  Original title: STUCK IN. LNK ??????????????????????????????????????????????????????????????

  all my icons turned into extensions of file and state that "windows is unable to open these files. I can't search the Web for a fix, because it downloads as a .lnk I can't open as well?

  Hi MarcSatz,
   
  -Did you change on your computer before this problem?
   
  This problem occurs when one or more of the following conditions are met:
  • The registry values that are associated with the file name extension are corrupted or missing values.
  • The computer is infected with a virus.

  Here is an article that will guide you in the process of fixing the issue:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
   

  Cannot open files with extensions such as.exe, .com, and.lnk on a Windows XP-based computer

• Update Windows problem with the Bits Service and error 0 x 80070057

  The service status: problem with the Bits Service

  Error 0 x 80070057

  Original title: Windows Update problems

  Hi Dexter,

  Can I know the KB # the update fails?

  What is the question pertaining to a specific or all update updates?

  What antivirus software you use on your computer?

  To resolve this problem, see the following article:

  Difficulty errors Windows Update corruption as 0 x 80070002 and 0 x 80070057

  Hope the helps of information. Get back to us with more information to help.

• View is not to connect to the event db and error unable to connect to the db

  Hello

  while trying to connect the event dB view, I encounter a weird problem where, by getting "unable to connect" error message.

  in the error log I get below error also can you pls help.

  TP-Processor1 > code [ConfigurationManagerBean] ADAM Error: 2 128 com.vmware.vdi.admin.ui.ConfigurationManagerBean.updateDatabaseConfiguration(SourceFile:181)

  com.vmware.vdi.adamwrapper.exceptions.ADAMServerException: database initialization failed, SQL exception when connecting to the database: TCP/IP connection to host failed. java.net.ConnectException: connection refused: connect

  at com.vmware.vdi.admin.be.ConfigurationManager.a(SourceFile:1703)

  at com.vmware.vdi.admin.be.ConfigurationManager.updateDatabaseConfiguration(SourceFile:1580)

  at com.vmware.vdi.admin.ui.ConfigurationManagerBean.updateDatabaseConfiguration(SourceFile:177)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)

  at java.lang.reflect.Method.invoke(Method.java:606)

  to com.vmware.vdi.admin.ui.common.ViewFlexFactory$ ViewProxy.invoke (SourceFile:113)

  to com.sun.proxy. $Proxy56.updateDatabaseConfiguration (unknown Source)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)

  at java.lang.reflect.Method.invoke(Method.java:606)

  at flex.messaging.services.remoting.adapters.JavaAdapter.invoke(JavaAdapter.java:418)

  at flex.messaging.services.RemotingService.serviceMessage(RemotingService.java:183)

  at flex.messaging.MessageBroker.routeMessageToService(MessageBroker.java:1400)

  at flex.messaging.endpoints.AbstractEndpoint.serviceMessage(AbstractEndpoint.java:1011)

  at flex.messaging.endpoints.amf.MessageBrokerFilter.invoke(MessageBrokerFilter.java:103)

  at flex.messaging.endpoints.amf.LegacyFilter.invoke(LegacyFilter.java:158)

  at flex.messaging.endpoints.amf.SessionFilter.invoke(SessionFilter.java:44)

  at flex.messaging.endpoints.amf.BatchProcessFilter.invoke(BatchProcessFilter.java:67)

  at flex.messaging.endpoints.amf.SerializationFilter.invoke(SerializationFilter.java:166)

  at flex.messaging.endpoints.BaseHTTPEndpoint.service(BaseHTTPEndpoint.java:291)

  at flex.messaging.MessageBrokerServlet.service(MessageBrokerServlet.java:353)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:723)

  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)

  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)

  at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:646)

  at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:436)

  at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:374)

  at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:302)

  at com.vmware.vdi.admin.ui.servlet.AMFProxyServlet.a(SourceFile:90)

  at com.vmware.vdi.admin.ui.servlet.AMFProxyServlet.doPost(SourceFile:57)

  Hi James,

  It's a SQL API based in the event database connection, it does not need an ODBC connection, see will do for you.

  I just wanted to know what operating system you are using to connect to the server and did you do Windows Update on this machine? If not done it please do.

  restart the machine try connecting the event database. It does not work please check the things mentioned in the KB below

  http://KB.VMware.com/kb/1029537

  You can do one more thing before checking the KB, if the connection to the server OS is windows 2012 and the SQL Windows 2012, take a snapshot of the VM Server conection and proceed to

  under location

  C:\Program Files\VMware\VMware View\Server\broker\shared\lib\sqljdbc-1.2.jar

  Stop all the service view in the connection to the server.

  sqljdbc - 1.2.jar and rename sqljdbc - 1.2.jar.backup.

  Download SQL JDBC 3.0 driver http://www.microsoft.com/en-us/download/details.aspx?id=21599

  extract the downloaded file and copy the sqljdbc4.jar to location (C:\Program Files\VMware\VMware View\Server\broker\shared\lib\)

  also copy same file once more and rename the file to sqljdbc-1.2.jar

  Restart all services server connection and wait 10 minutes, then check the admin page.

• Data loss after the instant withdrawal (and errors)

  This title does not exactly cover all this... but the biggest part is covered.

  I'm fairly new to Vmware ESXi, but yesterday we had a problem. We had exactly this error in ONE of our virtual machines

  We have 2VM on a 250 GB SATA drive to the address in the mirror.

  Drives: 1 x 40 GB / 1 x 100 GB/1 x 70 GB

  As you can see, there was little room left. When the system tried to make snapshots (don't ask me why, we certainly didn't want to, we create backups on a San from some windows), he could not and that he left us the above error (at least that is what I think). After a few minutes on google I found this page http://virtrix.blogspot.com/2007/06/vmware-dreadful-sticky-snapshot.html.

  Then came a thought that it just was not enough room to make a snapshot. If a 160 GB extra hard drive is added to the server (physical). I copied the VHD, including the-000001-the new hard drive for the files delta.vmdk and - 000001.vmdk ( which took forever, 103 GB at least 6 hours all thoughts on this /offtopic).

  I removed the hard drive of the virtual machine (on the physical disk, the file has been moved to the new drive) and added the virtual disk to the virtual machine (not the delta, but the real - flat file).

  Then I did exaclty the last line of the page linked above, the line ending by "great huh? But things are not that great, because now we have data loss. I think that the changes in the files of snapshots must be inserted into the - flat file, but because the situation has changed... is it possible to do? Otherwise a few weeks of work or disappeared into thin air... (not yet looked in backups...)

  If the virtual machine never was under tension since the creation of hartserver_1 - 000002.vmdk we can ignore it.

  I started to copy the files after snapshots were made, I did not copy the snapshot files. and as I said in my first post,

  I deleted the disk of the virtual machine and added the 'copied' to the VM disk. (the - flat file) is when

  data loss of course occurred because the disk know not the snapshot files.

  In this case, copy the snapshot files to the new folder AND rename the old folder.

  Can also edit the VMX file and remove all the absolute paths.

  Example:

  scsi0:1.filename = hartserver_1 - 000001.vmdk

  Instead of

  scsi0:1.filename = /vmfs/volumes/49acf302-aff5ac21-ddde-000423c854bc/hartserver_1-000001.vmdk

• The spell checker in FF11 does not erase the previous words and fills the context menu

  Suggestions of preceding words are in the context menu and fill it instead to introduce myself with only one suggestion at a time. It comes from FF11

  If you start Firefox in Safe Mode, precise check work better here? It's probably an add-on of any kind interfere with normal operation.

• some settings are managed by your system administrator (I am the only administratot and owner how can I stop a person controlling my computor location)

  I get a message (somesettings are managed by your system administrator). I am the administrator owner i.e. Head boy, top dog. How someone can be control my computor all the best Roy Barton

  How or when you receive this message?

  What is the EXACT TEXT of the message?
  Belongs to your PC to a network or domain?
  What version of XP you - run Home, Pro, or MCE?
  What kind of profile do you use normally - administrative or regular user with limited rights. For examples, see:
  
  http://www.windowsnetworking.com/IMG/gif_wxp/wxphusr1.gif

• The event log and error gusvc

  I got the system freeze when in "sleep mode" and "blue screen". I ran system restore, regcure and scan all the material for viruses, etc..
  The last event gave the source as "gusvc" and the details as follows:

  "The description of event ID gusvc source 0 was not found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer. »

  Where the head? I'm trying to avoid replacing my hard drive (had data from external drives movement all along).

  Thank you
  joanjps

  Hi joanjps,

  Thank you for using answers Forum.

  "gusvc" is the Google update service. I suggest re-installing/updating your Google product to solve this problem.

  If your using Google Earth, you can check the minimum hardware required for use, because it's a lot of resources.

  I also suggest updating your video card driver by visiting the manufacturers Web and search for the latest version of the driver.

  I hope this helps.
  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How do I completely erase the hard drive and reinstall everything for Windows 7?

  I want to completely erase a hard drive on a laptop, that I intend to use when traveling.

  Then I install windows 7 (which I bought) and my other programs

  Can I get step by step please

  Thank you

  Wanda Gill

  Some read to you... Installation of Windows 7

  http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall

  But before you begin, make sure that your computer and the applications and the current programs are Windows 7 friendly...

  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=1b544e90-7659-4BD9-9e51-2497c146af15

  And check your programs here too...

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=software