HP 15-f009wm Notebook PC: laptop does not start in windows. UEFI diags say hard drive is bad.

Similar Questions

• laptop does not start after you install a new hard drive

  HP G60-630us laptop... .replaced hard drive... .installed 3 boot disks... After you remove the last drive, when you click on continue it is supposed to start... .it reads no boot device... . If put you the first disc to start, you end up back where you started... I changed the boot order and put the hard drive first... even starts

  Hello

  That sound great for the hard drive.

  With regard to the problem you have with Windows activation, it's because your laptop is listed as originally came with Windows 7 Home Premium - as I mentioned in my guide for the creation of a sale installation disc at retail, the image that you use needs to be also be Home Premium - IE you cannot move to professional or ultimate edition as the key on your COA label will not work for a different version of Home Premium and there is no way around that.

  The image that should be used is on the following link.

  Windows 7 Home Premium 64-bit.

  You will need to create another disc of installation using the above Image and then use it to reinstall Windows 7 - the activation methods I described previously, then will work fine.

  Kind regards

  DP - K

• Laptop does not start upward, Windows error recovery

  Hello, my laptop has blocked start correctly.

  It all started when I was using the laptop as usual and the battery disconnected, I didn't notice right away until I removed the charger and the phone is dead, because then the laptop does not start with the dough connected and the charger,

  I use Windows 7 when I boot up I got to Windows error recovery that takes me so into the Startup Repair which is nothing, I tried system restore but it won't let me past picking of a restore point.

  I have I have the laptop currently in safe mode hoping that would allow me to restore the system, but it has not, please someone can he help because it is a work laptop and I need to use it this weekend

  Thank you, Josh

  Hello

  Thank you for visiting Microsoft Community.

  According to the description of the problem you are facing problems with your Windows 7 computer. The question might be if there is a file system corruption. Then I suggest you to perform auto repair. For the execution of the task, I suggest you to try the steps below and see if it helps.

  Method 1:

  When you use the recovery environment (Windows RE) to troubleshoot startup issues, first try the Startup Repair option in the System Recovery Options dialog box. If this does not resolve the problem, or if you have additional problems manually, use the Bootrec.exe tool.

  Because you cannot start the computer, you may need to create a bootable Windows installation media, and then do an auto repair.

  If you are using Windows 7 then the link provided below might help you to download and create installation media.

  Download Windows 7 Disk Images (ISO files)

  Method 2

  Try to rebuild the BCD by using the Bootrec.exe tool.

  To run the Bootrec.exe tool, you must start Windows RE. To do this, follow these steps:

  1. Place the Windows 7 installation disc in the disc drive, and then start the computer.

  2. Press a key when you are prompted. Select a language, a time, a currency, a keyboard or an input method, and then click Next.

  3. Click repair your computer.

  4. Click the operating system you want to repair, and then click Next.

  5. In the System Recovery Options dialog box, click command prompt.

  6. Type Bootrec.exe, and then press ENTER.

  See the following link for more information:

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  Hope this information helps.

  Meet us with the State of the question.

  Sincerely,

  Ankit Rajput

• HP 250 g3: hp 250 g3 does not start with windows 8 ir says the GPT partition style

  HP 250 g3 does not start with windows 8, it is said GPT partition style and custom boot that I have fomarted the hard drive... Please help

  Thnx man always the same thing, but I deleted all partitions and then I was able to start...

• laptop does not start in windows

  Computer hp pavilion dv6 3085tx laptop I used for 2 years, nw its not start in windows, but it boot in the BIOS, I have given hard drive that test by pressing F4, the result is quick (303) hard drive and disk hard full (305) are red and yellow smart hard drive. When I tried to recover windows OS with recovery disks, it shows, unable to do the partition E drive error. If completely damaged hard drive? If so, have to return disk hard nine or any other solution?

  Looks like your hard drive needs to be replaced.
  
  Here is the service manual for your laptop:
  http://h10032.www1.HP.com/CTG/manual/c01758220.PDF
  
  If you look down in the Description of the product, you should see what hard drives are supported by your computer. Looks to up to 500 GB (5400 RPM). You can also visit www.crucial.com, type in your product number and they will make recommendations to hard drive. (You may be able to get more than a 500 GB hard drive, but you may need to update your bios to recognize).

• Satellite M45 - does not start after restoration on the new HARD drive

  I installed a new PATA 250 GB HDD on my pc. The BIOS is configured to boot from CD/DVD. Toshiba Recovery disk started cold, start follow-up statement to load a new system on the HARD drive. He made a (quick) format on the HARD drive, spent 50 minutes, copy the files from the CD to the new HARD drive. Followed the instructions to remove the CD and reboot the pc. Did. I get the Toshiba homepage for 2-3 seconds, and then I get a white screen with a white block cursor in the upper corner of the LH of the screen. Looks like it does not find the block on the HARD disk?
  The procedure of collection 3 times with the same results. Checked the BIOS to check that it is configured to boot from the HARD disk after installation.

  The recovery CD is blank. Never used because I bought the PC (3.5 years). Put the new HARD drive in a USB enclosure and formatted with Windows, tried again with the same result? Put the old HDD, PC starts and works very well. Put the live CD Knoppix and boot from that, works very well. See the new HARD drive.

  Thus, any suggestions are appreciated. The recovery CD Toshiba is defective? In any case to test?

  Thank you
  -J

  Hello

  Sounds like a problem with the recovery disk or the new HARD disk if your computer starts up fine with the old HARD drive...

  In your case before you start a lengthy discussion, you should try a Microsoft Windows disk to install Windows. If he work it seems that only the recovery disk is defective.

  Otherwise, the HARD disk must be defective. Maybe a bad sector or something else

• Windows 7 Professional does not start upward when adding a 2nd hard drive is stuck on the windows logo

  I try to add a 2nd hard disk - a disk seagate 1.5 to - win7 will not start - stuck - up when I connect the drive.

  I have another drive, a 160g WD drive - it starts ok w / that a connected.

  Why is it ok w WD drive / 160g of starter, he recognize etc ok but won't start w/1.5 tb seagate drive?

  both are sata drives - connected to the same sata port when I try of their

  "richiedude4444" wrote in message News: * e-mail address is removed from the privacy * .com...

  Nevermind - I found it for my # model/serial

  fact firmware uupdate and still win7 crashes at startup looks like I got a new seagate brick.

  As it is a new drive and is under warranty, contact Seagate for replacement.  Any company can send a piece of equipment DOA.

• HP 15-g011nr Notebook PC: laptop does not start. Blue screen then reset

  Hello. I am trying to help a friend fix his laptop. for some reason, when starting normally, it will start with a black screen for a good few minutes or so the HP logo will appear with the circles spinning or waiting. After that what seems to be a good 5 minutes it will blue screen. the error reads something like "error loading operating system" or something, but I can't read it because it appears for one second before the reset and start the process again.

  I discovered that pressing ESC over and over to the right as I turn it on it will give me options to restore the system and devices to boot, but it does not help much at all. I try to use the CD of windows on it and it does nothing, I even tried to use the CD via a bootable flash drive and nothing. of course, it will say usb IS bootable but when I select it it gives me the HP loading screen and then a black screen. I even tried to wait an hour to see if it is just loading, but nothing.
  
  If anyone has had this problem with this laptop and if so do you know if there is a way to fix it? Thanks in advance.

  HI @Rabidmedia,

  Your mistake is to your computer laptop 15-g011nr HP it's a quick drive Test failure 1. The error indicates that your hard drive is defective and must be replaced.

  Here a link to your service manual page 49 for number of replacement and how.

  I hope it helps.

  Thank you.

• Pavilion DM4-1265dx does not start after the restoration, the new hard drive

  Hello:

  I have a laptop of clients that a hard drive has been giving an iminent failure message.  I was able to create a disc of recovery and replaced the original HD (640 GB) with a 500 GB HD.  I can't do the factory recovery because the hard drive is smaller, but it allows me to perform a recovery of the operating system.  The question that I am running is after he read the DVD 6, the system wants to re-start and then it crashes just in the HP splash screen.  If I turn it works, I get could not find a boot device.

  How can I get around that, before the establishment with a win 7 CD?  Is this process of recovery to a waste of time, as I did on the previous model HP computers and it has always worked.

  Thanks in advance for any ideas.

  Mike

  Hi cloud:

  To be more precise, of memory, there are two options, reset and factory restore.  Factory restore won't do it because the disk is slightly smaller.  Factory reset will allow me to put the recovery disk hard, but when he re - start, it crashes just in the hp splash screen.  When I do the three fingers of salvation, then I get cannot find the boot device.  I made the internal test and everything passes with flying colors.

  I finished download an iso image and install from scratch, but I can tell you that it is the system more screwed up that I never ran into 30 years of working with these toys.  I tired to do a repair, but that creates just again the same symptom.

  I have an Acer Tablet that I've been able to use the computers acer recovery disk that was not intended (but had the same version of the operating system) and at least was able to get the operating system and software and finished to the top with the right drivers, size of the hard drive has been ignored in their case.

  Thanks for help you, it is appreciated, but I doubt I can recommend HP to one of my clients in the future based on what I've run here.  This is inconsistent with a solution of recovery as far as I'm concerned, that MS requires manufacturers.  Lets get real, hardware fails for various reasons, and you may not necessarily the same size hard drives with the rate of change occurring in the industry.  Personally, I prefer a game of installation for the operating system and drivers disks.  Dell is one of the only ones I know who did this, and as much as their material is so so, they do at least that right of the party.

  Once again thank you.

  Mike

• Computer does not start if the 150 GB Toshiba HARD drive is connected

  Hi, I bought an external hard drive of 150 GB PX1220E of pc world a few days ago. When I start my PC it sticks on the splash screen, and I have to unplug the usb cable and restart the pc, then connect the drive again to use it.

  Is this an error with the drive?

  Hello

  I googled a bit and it seems that it is really a Toshiba HDD.
  However, for me, this is NOT a malfunction.
  The external HARD disk is connected before starting. So I think that the computer is trying to boot from the external HARD drive and so it freezes.

  You should check the boot order in the BIOS and connect the HARD drive after you start the procedure.

• Laptop does not start after Windows update

  I have HP laptop with Windows 8.1.

  It no longer starts after you install updates.

  It has happened before several times. I used system restore and it should correct the problem temporarily until the next time for the installation of updates.

  Now I can not even run system restore. He says that I have an administrator account.

  Help, please.

  The process I'll tell you will solve the problem, but it leaves a few effects. All the installed update will be uninstalled the version they had when you have installed 8.1 windows and programs in your programs (x 86) NO program file in the C: drive or the drive where windows is installed must be UNINSTALLED. The uninstalled programs will appear on your desktop as Applications.HTML removed. If you have any problem with the effects that I mentioned that process as follows:

  1. at start up press F11 to enter recovery.

  2. go on recovery to solve problems.

  3. then in troubleshooting, click on refresh your PC.

  4. wait it ends (it takes about an hour)

  5. your system is restored.

  Hope this helps

• Upgrading RAM and now computer laptop does not start for Windows 7

  Hi all

  I'm working on laptop HP Pavillion G7-1070us of my father, and I'm having a problem starting after the installation of 8 GB of RAM.  I upurchased 2 sticks of 4 GB of DDR3 PC10600 UN buffered, NON ECC RAM of Frys and everytime I go to start the laptop it throws an error that can not load Windows and offers to run the repair or start normally... little matter that you select, it goes back in the loop of what prompts to repair or load... The BIOS recognizes all the 8 gb... have you tried 2 different sets of different manufacturers (Patriot and Crucial). As soon as I pop 2 2 GB sticks in it boots fine... I even tried to start the the Windows 7 DVD to repair windows, but he always comes back in the loop... I tried the two current and previous BIOS without success... Help, please

  Hello

  Sorry, I've updated the link:

  http://www.crucial.com/upgrade/HP+-+Compaq-memory/Pavilion+G7/Pavilion+G7-1070us-upgrades.html

  Kind regards.

• My laptop does not start after cleaning

  Hello
  I knew an overheating problem on my laptop.
  I therefore decided to remove a processor heat sink and empty dust. It was released with processor...
  There was a huge load of dust, so I cleaned it, put new thermal paste...

  Now computer laptop does not start loading Windows.
  It checks only the CD, HARD disk, and that's it.
  Screen is blank, ON the indicator led is on.
  Two fans periodically start to turn (when they stop radiator heat - so the processor works)

  Where is the problem?

  Thank you

  Hi Dubas,
  You can access the BIOS when you try to start your laptop? This can give you a clue as to why the OS will not charge.

  Kind regards

• Laptop: laptop does not start

  My laptop does not start, how can he?

  Hey,.

  First, a good thing to try is a hard reset of the computer.  The steps are different depending on whether your battery is removable or not.  See http://support.hp.com/us-en/document/c01684768 for steps and videos covering this first easy step.

  If you are still having problems starting to walk through the steps in the troubleshooting online here documents:

  Windows 10 - http://support.hp.com/us-en/document/c04718479

  Windows 8 - http://support.hp.com/us-en/document/c03515402

  Windows 7 - http://support.hp.com/us-en/document/c01443371

  -wes

• Laptop does not start with the connected usb device

  Hello
  Voila, I have a Sp6100 Pro Satellite, when I try to start whith a usb printer is connected, the laptop does not start. I have the latest version of the bios 1.90.

  THX,
  Barzot @+.

  Hello

  What you mean with start won t at all? Is there any kind of reaction if you press the power button / stop?