Data loss after the instant withdrawal (and errors)

Similar Questions

• Data loss after the use of disk recovery - how to recover data

  I know this may sound stupid and I know that I was...

  But it was the first time that I had to run the recovery disk and I moved all my important documents on the second partition (E :) and then run the recovery disc, thought it would be only to format the first partition (c)...
  Well I was wrong.

  Can anyone help me please with a way to get information on my second partition (e)?

  Hi mate

  I have bad news for you
  The HARD drive has been formatted by the recovery DVDs, which means that all available partitions have been deleted!

  I'm sorry but I don't see the options to retrieve data :(

  Of course, there are many companies that are able to save data on hard drives according to the formatting of HARD drive, but in my opinion, the costs would be immense

• Java Oracle GoldenGate adapter the data loss after the failure of the transactionCommit()?

  I am developing a custom Manager to deliver the change Oracle logs.

  When errors have occurred, normally, I can throw RuntimeException or return Status.ABEND. Then OGG would be the error in the log and stop the process.

  The following code works fine when operationAdded() failed (extraction process will report abend, and when extraction of restarting after errors, the operations in the transaction failure would be referred to the Manager).

  @Override
public Status operationAdded(DsEvent e, DsTransaction tx,
   DsOperation dsOperation) {
   Status status = super.operationAdded(e, tx, dsOperation);
   ...
   //throw new RuntimeException("op add runtime error");
   return status;
}

  However, when the error occurred in the function transactionCommit(), OGG does work as expected. Throw RuntimeException or return only Status.Abend can stop the extract. Just OGG continue to work like nothing happened. (Code below)

  @Override
public Status transactionCommit(DsEvent e, DsTransaction tx) {
   super.transactionCommit(e, tx);
   Status status = sendEvents();
  handlerProperties.totalTxns++;
   //throw new RuntimeException("tx ci runtime error");
   return Status.ABEND;
}

  I tried to kill and restart the extraction process. The transaction that failed were not referred to the Manager. It seems that all the transaction data that failed were lost!

  Here are the logs of return Status.ABEND in transactionCommit():

  ...
DEBUG [main] (AbstractHandler.java:509) - Event: handler=ggdatahub, transactionCommit ( Commit transaction ) DsTransaction [ops=1, buffered=1, state=BEGIN, start=2015-08-21 20:04:25.842275, end=2015-08-21 20:04:25.842275]
WARN [main] (DsEventManager.java:231) - Error sending event to handler: status=ABEND, event=Commit transaction, handler=ggdatahub
Exception in thread "main" com.goldengate.atg.util.GGException: Unable to commit transaction, STATUS=ABEND
  at com.goldengate.atg.datasource.UserExitDataSource.commitActiveTransaction(UserExitDataSource.java:1392)
  at com.goldengate.atg.datasource.UserExitDataSource.commitTx(UserExitDataSource.java:1326)
Error occured in javawriter.c[752]:
***********************************************************************
Exception received committing transaction: com.goldengate.atg.util.GGException: Unable to commit transaction, STATUS=ABEND

DEBUG [main] (UserExitDataSource.java:504) - (JNI) C-user-exit checkpoint event
DEBUG [main] (UserExitDataSource.java:1364) - UserExitDataSource.CommitActiveTransaction: Same transaction committed more than once (possibly due to commit-on-checkpoint).
DEBUG [main] (UserExitDataSource.java:516) - UserExitDataSource.userExitCheckpoint: incrementing the flush counter
DEBUG [main] (PendingOpGroup.java:315) - now ready to checkpoint? false (was ready? false): {pendingOps=1, groupSize=0, timer=0:00:00.000 [total = 0 ms ]}
DEBUG [main] (UserExitDataSource.java:504) - (JNI) C-user-exit checkpoint event
DEBUG [main] (UserExitDataSource.java:1364) - UserExitDataSource.CommitActiveTransaction: Same transaction committed more than once (possibly due to commit-on-checkpoint).
DEBUG [main] (UserExitDataSource.java:516) - UserExitDataSource.userExitCheckpoint: incrementing the flush counter
DEBUG [pool-1-thread-1] (AbstractDataSource.java:737) -  [2] getStatusReport: Mon Aug 24 10:51:14 CST 2015
DEBUG [Thread-1] (UserExitDataSource.java:1601) - UserExitDataSource closing, #1 of class="UserExitDataSource"
DEBUG [main] (PendingOpGroup.java:315) - now ready to checkpoint? false (was ready? false): {pendingOps=3, groupSize=0, timer=0:00:00.000 [total = 0 ms ]}
DEBUG [Thread-1] (UserExitDataSource.java:1608) - Shutting down data source; attempting a final checkpoint.
INFO [pool-1-thread-1] (AbstractDataSource.java:730) - Memory at Status : Max: 455.00 MB, Total: 60.50 MB, Free: 27.54 MB, Used: 32.96 MB
DEBUG [pool-1-thread-1] (UserExitDataSource.java:1637) - time spent checkpointing: 0:00:00.000 [total = 0 ms ]
DEBUG [Thread-1] (UserExitDataSource.java:1668) - doCheckpoint() called
INFO [pool-1-thread-1] (AbstractDataSource.java:980) - Status report: Mon Aug 24 10:51:14 CST 2015
*************************************************
Status Report for UserExit
*************************************************
Total elapsed time:   2 days 14:47:06.139 [total = 226026 sec = 3767 min = 62 hr ]   => Total time since first event
Event processing time:  0:00:12.692 [total = 12 sec ]   => Time spent sending msgs (max: 4795 ms)
Metadata process time:  0:00:02.159 [total = 2 sec ]   => Time spent receiving metadata (1 tables, 3 columns)
Operations Received/Sent:  3 / 3
Rate (overall):   0 op/s  (peak: 0 op/s)
   (per event):   0 op/s
Transactions Received/Sent: 2 / 0
Rate (overall):   0 tx/s  (peak: 0 tx/s)
   (per event):   0 tx/s
3 records processed as of Mon Aug 24 10:51:14 CST 2015 (rate 0/sec, delta 3)
*************************************************

  Someone knows how to fix this? Thanks in advance!

  
  

  For others who may encounter this problem:

  It turns out be a bug...

  I switch to Version 11.2.1.0.1 OGGCORE_11.2.1.0.1_PLATFORMS_120423.0230 Version 12.1.2.1.4 OGGCORE_12.1.2.1.0OGGBP_PLATFORMS_150303.1209 20470586 . Everything works fine now.

• After the clean boot get error loading awuspn.dll and load yabbyx.dll error. The specified module could not be found

  Hi Thahaseena,

  Thank you for helping! Finally I solve the problem of the error1324.but there were other questions come, after I did the clean boot and restart the computer then log, the window came several times put warn against the "Rundll":) 1 awuspn.dll 2) error loading yabbyx.dll loading error (both happened to uo WARNING several times). And boths display the message "the specified module could not be found. I tried to restore the computer to the State at the beginning, but it has no will to restore before the own boot.would you please help me to solve this problem again?

  Thank you

  Well, I want you to do is run MalwareBytes.  You say you already ran MalwareBytes after the clean boot, and then tried to reload regularly?

  Whatever program you have downloaded to fix the missing image file sounds like he came by malicious software.  What is the name of this program.

  --
  Gina Whipp
  Microsoft MVP (access)

  Please post all responses on the forum where everyone can enjoy.

• QSI CDRW/DVD SBW-242 won't read DVD or BURN a CD (music CD will PLAY) [AFTER the HD FORMAT and re - install}

  Dell Inspiron5100 WinXP SP3.

  Due to malware, I had to FORMAT my HD and re-install Windows XP OEM disc.  I also reinstalled WIN DVD4 from the OEM disc that came with the laptop.

  Check SYSTEM/DeviceMGR/material indicates a problem with the drive, but: it won't READ a DVD or burn a CD (which she has done before)

  Can't update anything of QSI as they were absorbed by COREL years.  No support available for WINDVD4

  When you try to run WINDVD4 with a DVD in the drive, I get a Popup of WINDVD screen that says:

  CREATE OVERLAY FAILED-Please lower your color depth or screen resolution and try again.  Of course, it worked fine with the reg settings in the past, now Ive tried even lower TWO the RES SCREEN and color at least registered but still does not work

  It WILL play CDs of music (mp3s)

  Found the following material etc.

  Provider: Microsoft Corp.

  File version: 5.1.2600.5512 (xpsp 080413-2108

  Driver date: 01/07/2001

  Driver version: 5.1.2535

  Driver files

  C\windows\system32\DRIVERS\cdrom.sys

  "" "" \DRIVERS\imapi.sys

  «"\DRIVERS\redbook.sys «»

  «"«\system32\ c:\windows\system32\storprop.dll»»»

  I installed and ran but it won't play MICROSOFT 'FIXIT' DVDs just run from WINDVD4 and still does not.

  FIXIT now brings me HERE

  It seems that FORMAT/reinstall has missed something the will allow the CD PLAYER of .1BURN and 2. READ the DVD, but allows you to PLAY CDs

  From: * e-mail address is removed from the privacy *.
  To: * e-mail address is removed from the privacy *.
  Date: Tuesday, May 17, 2011 08:30:29-0700
  Subject: QSI SBW 242 CDRW/DVD not play DVD or BURN a CD (music CD will PLAY) [AFTER the HD FORMAT and re - install}

  Response

  Hello

  1. are you able to read any type of file .doc or .txt of DVD?

  After following all the steps (including the update of the MP9 for Media Player [MP] 11) below

  I can get the drive to DISPLAY all the data from the DVD (Master & Commander 'movie)

  on-screen MP11.  He plays (automatically) the intro (ONLY) from the DVD music (as when you put it in a DVD player, forward to press PLAY) MP11 shows all of the content and all the files on the DVD and SEEMS ready to play, but pressing on PLAY don't either not anything.

  2 , what exactly happens when you try to burn the CD? You get the error message?

  Not nothing... He's here

  3. How do you try to burn CDs?

  MediaPlayer, selection of a track list, made a list of titles, and then click BURN... nothing happens

  4 have you tried to play the DVD content in ? windows media player

  I had not before, but now I have.  Previously it was default to my SELECTION WIN DVD4 as the DVD player (I think I've EVER SEEN the WINDVD format/start page on the front screen - it wasn't the default front DVD player either but don't remember what program PLAYS the DVD, he ' comes of ").  Now, go back and see 1. above for MP11 more details.

  Try to update the drivers of CD-RW/DVD drive and check. Also update the graphics driver.

  I did the entire bottom.

  1. click on Start, click Control Panel, and then double-click System.

  2 click on the hardware tab, and then click Device Manager.
  If you are prompted for an administrator password or for confirmation, type the password, or click continue.

  3 right-click on the CD-RW/DVD drive, and then select set to update driver.

  He asks if I have an OEM driver and / disk... NO.. I run the program through...

  "Hardware update Wiz can not find a better match the software installed"

  4. right click on the graphics card and select Update driver. »

  There is no "graphics card" on the material.  This machine has integrated graphics using a part of the main memory (or other) to run the video section:

  I find:

  AUDIO, VIDEO and GAME controllers (announcement)

  Audio codecs

  Audio drivers

  Legacy video capture device

  Media control devices

  Audio Sigma

  Video codecs

  All this seem normal but above I see YELLOW TWO warnings under 'OTHER DEVICES '.

  ?!  Ethernet controller "drivers for this divide (code28) is not installed.

  ?! VIDEO CONTROLLER (VGA Compatible) I didn't HAVE NO IDEA if THIS if APPLIES OR NOT

  Device type - other devices

  MFG-unknown

  Location PCI bus, device 0, function 0.  "Drivers for this device are not installed, CODE28 to reinstall the driver."

  Has been through the usual (request for drive... Laughing out loud. Impossible to beat")

  See also:

  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

  http://support.Microsoft.com/kb/321641

  Did yesterday.  It installed/ran "MR. Microsoft Fixit' with the result:

  "Question: media in the CD-RW/DVD drive is not readable" CLICKED top DIFFICULTY... and after computer "worked" on this subject awhile, he says STATUS: fixed.  St ill did not.   MP9 introduced the format of the DVD player but don't seem to read anything other then showing a list:

  UNKNOWN

  Title 1

  Title2

  Title 3 etc., but could not do anything with this list.

  He appeared a box asking if I wanted to update my MP9... sure why not so I shut everything down and uninstalled 9 and installed Media player 11.

  Go BACK to # 1. now once again.  This is where I am.  MP11 shows all DVD data, the chart "the Album/DVD cover, all"titles"on the DVD, AND play the track audio 'intro' DVD but will not actually READ the DVD. "

  So far it's PROGRESS.  We are at a point where it SEEMS at least that we are ready to PLAY and MP can SEE all the info on the DVD.

  I see many people on other sites of the same question: Player does not work after FORMAT operating system and reinstall of WIN (and in my case: WinXP SP3 and WIN DVD4 of OEM disc)

  Thanks a lot for your help so far... I hope that we can get to the next step and get the reader of CD-RW/DVD on 'PLAY '.

• Erase the VDR warnings and errors, how to

  The Question is:

  How to manually delete the warning and error report in VMware Data Recovery (reports tab)?

  Prehistory:

  After you resolve the problem with the error-3902 (file error), VDR has collected much embarrassing mistakes in my warning and error report. So, I need to remember the amount of errors or check again each time I logged to VDR.

  V.1.1.0.707 camera VDR

  Currently it is impossible to remove old stains and information on the effects of VDR.   In the meantime, the only way to remove the configuration, which removes the inherited warning and error file as backup tasks.  Thus, you will have to re-create the backup jobs and reapply the credentials of the server vCenter if you follow these steps.  Note, the points of the response (i.e. saved data) is intact.

  The configuration files can be deleted by running these commands in the console (open console, connect to the device as root; default password is vmw@re).  Please ensure that unemployed / or VDR operations are running at the time - you should be able to look in the plugin VDR under report/Current tasks.  If there is no current task, run the following commands

  stopping service datarecovery

  RM /var/vmware/datarecovery/Config10.*

  (answer Yes to the files being deleted)

  (Check that the files have been deleted by an ls var/vmware/datarecovery/Config10.*)

  starting service datarecovery

  When you reconnect to the device, it will prompt you to enter the credentials of the vCenter server.  It also prompts you to import the most recent configuration - select No.

• How do I reduce the data file after the moving images to another data file

  All,
  
  I did a test of simepl to see how should I reduce my data file after the transfer of the objects thereof.
  
  I had an image in my data file USER_image, which is about 9 GB in size. I created the new data under the new tablpespace file and moved all the images in this new space of tables. So my old tablespace of image with its data file is now empty. At least there is not all user objects.
  
  Now I tried to resize the old datafile (USER_image) to a smaller value, but I keep this error
  "ORA-03297: file contains data beyond the value required to RESIZE.
  
  The file size is 9 GB and I tried to resize to 8 GB but it still does not allow me.
  
  Is it possible to resize a data file after moving all its purpose?
  I'm something wrong or missing something?
  
  Thanks in advance.

  If you old image tablespace is indeed empty (you need to run a statement against DBA_SEGMENTS to check) then you can bring it, data files included.
  After this, you can create a 'new' tablespace with the old name and desired data file sizes.

• Determine if the end date is after the start date

  I have 2 date fields in a form.  When I click the button submit, that I'm trying to ensure that the end date is after the start date.

  Here is the code I use:

  var sDate = Date.parse (BackgroundInformation.Background.CheckingDateStart.rawValue);

  var eDate = Date.parse (BackgroundInformation.Background.CheckingDateEnd.rawValue);

  xfa.host.messageBox ("Start Date:"+ BackgroundInformation.Background.CheckingDateStart.rawValue ");

  xfa.host.messageBox ("eDate: sDate" + eDate + ":" + sDate);

  if(sDate > eDate)

  	{
  	valid = false;
  	fieldName += "Start Date is greater than the end Date."
  	}

  The message box displays the start date 2014-10-30 but sDate is Nan.

  I tried:

  var eDate = new Date (BackgroundInformation.Background.CheckingDateEnd.rawValue);

  sDate var = new Date (BackgroundInformation.Background.CheckingDateStart.rawValue);

  and when I display sDate says 'Invalid Date '.

  Any ideas?

  It should work...

  var sDate = BackgroundInformation.Background.CheckingDateStart.value.date.value;

  var eDate = BackgroundInformation.Background.CheckingDateEnd.value.date.value;

  xfa.host.messageBox ("eDate: sDate" + eDate + ":" + sDate);

  if(sDate > eDate)

  	{
  	valid = false;
  	fieldName += "Start Date is greater than the end Date."
  	}

• Problems with SQL Server availability at the time of the instant withdrawal

  I use VMware VCB to backup a virtual computer that is running SQL Server 2005. Hang it works very well when the snapshot was taken, but I'm getting errors in my web applications .NET at the same time that the deletion of the snapshot is in progress. The errors indicate that the SQL Server is not available. Thus, the network does not respond for the snapshot validation process or e/s SQL Server gets interrupted (perhaps through an another quiesce?), when the snapshot is removed. Anyone know why that would happen? Do not hang the OS VMware at time of the instant withdrawal as well?

  No patch I know which would cause instant removal to pause the plu VM.  3.5 U2 introduced VSS in the virtual machine, but components that should affect only when a snapshot is created.  Also create the snapshot with smack memory made a break the considerably longer VM, but still affects only the creation of the snapshot not the elimination.

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

• Asus Vivo tab RT hardware keyboard stopped working after the default reset and updates.

  Separated from this thread.

  My Asus Vivo tab RT after the default reset and updates my physical keyboard has stopped working.

  but I can use the mouse by using the touchpad the touchpad works a few keys on the keyboard as...

  music, fn, FN + brightness work. but the letter keys are not. When I am pressing on the keys, they make sounds, but does not...!

  Hi Srikanth,

  I understand that you can not use the alphabetic keys on your tablet.

  To better understand the issue, please send us the following information:

  1. You are able to use the external keyboard with the laptop?

  2. Is this problem specific to certain keys or all alphabetic keys have similar problem?

  This problem could occur if the filter key is enabled, please disable filter keys and see if the problem is fix.

  Follow these steps to disable the filter key

  1. Press the Windows key + R.
  2. Type of control
  3. Click ease of access.
  4. Click on change your keyboard works.
  5. Uncheck the box that says Activate FilterKeys.
  6. Click Ok.

  You can also see the following article for some common troubleshooting steps that can be performed on Windows 8.

  http://www.Microsoft.com/hardware/en-IE/help/Windows-8/troubleshooting/keyboard/using-keys

  Hope this helps, get back to us if you need further assistance for Windows.

• I wonder if InDesign CC does a better job before kerning and after the dashes-n and m-dashes?

  I use InDesign CS6 but will move to CC soon. I wonder if InDesign CC does a better job before kerning and after the dashes-n and m-dashes? It seems unprofessional to have a complete space before and after, but it takes a lot of time to browse and kern each of them.

  If the font kerning between/em-quadratins is too tight, you could do your F/R to remove the space before/after and replace it with a thin after space.

  With Helv. Neue, when the paragraph style is the metric value when it is followed by a number, it is rather tight. Optics for the style of kerning setting seems to relieve that, giving a little more breath between dashes: on the left, the style is set on measurements, on the right is optical. Note that the most important effect is the half-quadratin before the number 8. The dash does not seem to suffer from this problem, regardless of the method of automatic kerning. But this half-quadratin is tight against the 8.

  

• where is mocha in after the effect cc and cs6

  where is mocha in after the effect cc and cs6 I foud associated anaything

  Mocha AE is not a separate application that you access or put it in After Effects. You use of After effects.

  See After Effects help for more details:

  http://helpx.Adobe.com/after-effects/using/tracking-stabilizing-motion-CS5.html

• How to maintain the availability of the data store after the upgrade to ESXi 5.1 with the new IP address and the naming convention?

  How can we maintain access to the presented LUNS and VMFS data store after we improve the ESX in ESXi with the new naming convention and the new model of IP addressing?

  My back-end SAN EMC Clariion is VNX

  Thanks in advance.

  How are the hosts connected to storage systems. With FC HBA for example, there is basically nothing you need to do since the WWN will remain the same and so LUN presentation of the zoning on the switch and storage system does not need to be reconfigured.

  André

• After the computer crash and reboot in the middle of editing, I get error at every start

  "Lightroom has encountered an error when reading the preview cache and needs to stop smoking. Lightroom will attempt to solve this problem, the next time it starts.

  IM using Win7

  and I can not find the preferences file nor can I find the file Previews.lrdata as suggested in this post

  Error at each start - after the installation of LR 5

  Thanks for any help

  The preferences file is not relevant to this error. Leave it alone.

  To remove the preview cache, follow these steps:

  1. quit Lightroom.

  2. in your operating system, look for your Lightroom Catalog. Catalogs are generally/Pictures/Lightroom on Mac and my Pictures\Lightroom on Windows.

  3. Locate the folder whose name ends in "Previews.lrdata" and delete it. (note, may you enjoy a folder whose name ends with "Smart Previews.lrdata." You shouldn't need to remove that one).

• Error launching PS CC 2015 after the last update and after update Windows 10 last night. What is going on?

  (Since the two updates at the same time, I'm not one that caused a problem within the PS but here's what I saw.)

  Microsoft sent an update to my Windows 10 software last night then when I logged on Windows with success, my CC Adobe said I had an update waiting. I went to CC and started the update of PS CC 2015. No errors were found. When I tried to launch PS later in the morning, it failed with the following information in the pop-up box:

  [Window title]

  C:\Program Files\Adobe\Adobe Photoshop 2015\Photoshop.exe CC

  [Content]

  C:\Program Files\Adobe\Adobe Photoshop 2015\Photoshop.exe CC

  The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe for more details.

  [OK]

  Adobe: do you know what is happening and how can I do? Re - install PS?

  Looks like I found a solution. I went to the CC Office and next to the PS application, click on the update button and it has apparently installed the latest ACR 9.3.1.520

  Deliver not more today!