ERRO:attribute headerDisabled may not be set on the component

Similar Questions

• After you run the fix it scan, get the message 'Windows Firewall may not be set as the default firewall service.

  I received the following message in the fix it running scan.  What should I do?

  "Windows Firewall cannot be set as the default firewall service. This may be because another firewall service is installed or because the Windows Firewall is disabled. »

  Hello

  · What fix it scan are you referring?

  · You have a third-party security software installed on the computer?

  · Who is the service pack installed?

  Run the troubleshooting utility from the link below and check if it helps: diagnose and automatically fix problems of Windows Firewall service: http://support.microsoft.com/mats/windows_firewall_diagnostic/en-us?entrypoint=lightbox

• After the last Windows 7 Corel Draw update gives the error: your computer may not be connected to the internet

  After the last update of microsoft don't work plugin CorelDraw Whatthefont. Use corel capture. I can see only: your computer may not be connected to the internet or you may have a firewall installed that blocks access to the internet.

  We try on Windows 7 and Windows XP, the two are not working. In Corel forum have said, it's the beginning after the last microsoft update.

  Can solve you?

  Sorry for my English.

  Thanks, problem was in router (probably). During weekend router died, now we have new (same type) and it s working on two PCs.

• I downloaded Silverlight and may not have to watch the videos

  original title: I downloaded silverlight may not have to watch the videos... He keeps wanting me to download it again...

  Silverlight will not work after download

  Hello

  1. what happens when you try to play videos?

  2 is the issue specific to MSN videos?

  3. do you get an error message or code?

  4. what browser do you use to play the videos?

  I suggest you to go through the steps mentioned in the link and the Coachman.

  The problems of Netflix streaming video in Internet Explorer running

  http://support.Microsoft.com/kb/2710013

  You can also post your question to:

  Welcome to the Silverlight.NET Forums

  http://forums.Silverlight.NET/

  If the problem is specific to MSN, then you can also post your question to:

  How to contact MSN customer service

  http://support.Microsoft.com/kb/940784

  See also:

  Known issues and limitations of Netflix in Windows Media Center for computers that are running Windows 7

  http://support.Microsoft.com/kb/977116

• Cannot open the document. You may not have permission or the document can be opened already.

  Whenever I try to open a document on our Mac server I get this error message: "cannot open the document. You may not have permission or the document can be opened already. "After that, I click Ok and then am able to open it. What is interesting is that immediately after the first time I try to open the file and get the error message that I noticed a .idlk (file locking) gets created even if she could not open. After that, I open it. Then, once I close it, the lock file goes.

  Someone knows something about this problem? For this particular user permissions are read/write on the file and all documents.

  Yosemite 10.10.3

  InDesign CC 2014

  Well, the problem has been resolved. It ends up being ESET antivirus v.4.xx for

  company. After I disabled it temporarily everything worked normally. So created

  exclusions for the shared network resources that they are working for.

• No record may not be added to the QueueDatabase

  
  It is very simple and basic, but when I add a record to a database with the 'tail' access method, he throws a System.ArgumentNullException. I write a modified test of a "excs_access" code, below:

  /*-
  * See the file LICENSE for redistribution information.
  *
  * Copyright (c) 2009, 2013 Oracle and/or its affiliates.  All rights reserved.
  *
  */
  using System;
  using System.Collections.Generic;
  using System.IO;
  using System.Text;
  using BerkeleyDB.

  namespace Test_QueueDatabase
  {
  Class Program
  {
  public static void Main (string [] args)
  {
  QueueDatabase queueDB;
  QueueDatabaseConfig queueConfig;
  chamois of the chain, dbFileName, keyString;

  Try
  {
  String pwd = Environment.CurrentDirectory;
  pwd = Path.Combine (pwd, "..");
  pwd = Path.Combine (pwd, "..");
  If (IntPtr.Size is 4)
  pwd = Path.Combine (pwd, "Win32");
  on the other
  pwd = Path.Combine (pwd, "x 64");
  #if DEBUG
  pwd = Path.Combine (pwd, "Debug");
  #else
  pwd = Path.Combine (pwd, "Libération");
  #endif
  pwd += ';' + Environment.GetEnvironmentVariable ("PATH");
  Environment.SetEnvironmentVariable ("PATH", pwd);
  }
  catch (System.Exception e)
  {
  Console.WriteLine)
  "Cannot set the PATH environment variable.");
  Console.WriteLine (e.message);
  return;
  }

  Try
  {
  dbFileName = "queue.db";
  If (args. Length > 0)
  dbFileName = args [0];
  }
  catch
  {
  Usage();
  return;
  }

  / * Optiionally remove the existing database file. */
  If (File.Exists (dbFileName))
  {
  While (true)
  {
  Console.Write
  ("{0} already exists.  Delete it? (y/n) ", dbFileName);
  Buff = console. ReadLine (). ToLower();
  If (buff == 'y' | buff == "n")
  break;
  }

  If (buff == 'y')
  {
  Try
  {
  File.Delete (dbFileName);
  }
  catch
  {
  Console.WriteLine ("Unable to delete {0}.", dbFileName);
  return;
  }
  }
  }

  / * Sets up the database. */
  queueConfig = new QueueDatabaseConfig();
  queueConfig.ErrorPrefix = "Test_QueueDatabase";
  queueConfig.Creation = CreatePolicy.IF_NEEDED;
  queueConfig.CacheSize = new CacheInfo (0, 64 * 1024, 1);
  queueConfig.PageSize = 8 * 1024;

  / * Create and open a new database in the file. */
  Try
  {
  queueDB = QueueDatabase.Open (dbFileName, queueConfig);
  }
  catch (System.Exception e)
  {
  Console.WriteLine ("Error opening {0}.", dbFileName);
  Console.WriteLine (e.message);
  return;
  }

  While (true)
  {
  Console.Write ("[empty to leave line] button >");
  KeyString = console. ReadLine ();
  If (chaine_cle == "")
  break;

  Data DatabaseEntry = new DatabaseEntry (Encoding.ASCII.GetBytes (keyString));
  Here, it throws an exception because the key of the record. Data are null (it should be the record number bit array).
  Error in the statement «back BitConverter.ToUInt32 (key.» Data, 0)"which will be called by Append (data).
  queueDB.Append (data);
  }

  While (queueDB.Length > 0)
  {
  KeyValuePair < uint, DatabaseEntry > p = queueDB.Consume (false);
  Console.WriteLine ("{0}: {1}",)
  p.Key, Encoding.ASCII.GetString (p.Value.Data));
  }

  Console.Write ("press any key to exit >");
  Return (true);

  / * Close the slider and the database. */
  queueDB.Close ();
  }

  utility #region
  public static Usage() Sub
  {
  Console.WriteLine)
  ("Use: [database] Test_QueueDatabase");
  }
  utility #endregion

  }
  }

  Hello

  Queue database is used to store fixed-length records, so you must set the record length before opening the queue database, but I didn't know that, in your code. To see the setting of the record length, please visit QueueDatabaseConfig.Length.

  Also QueueDatabase.Length does not tell you the number of records, it tells you just the record length. If you want to know the number of records, see QueueStats.nData.

  Kind regards

  Winter, Oracle Berkeley DB

• Network map - to limit the number of computers listed under "following peripheral discovered may not be placed into the foreground.

  I have a variable number of both real as virtual computers on my network. In this issue, I plan only to those that are visible to the windows (they have SAMBA or similar installed and running).

  All these machines appear under ' Control Panel-> and Internet-> view computers and network devices.

  When I view on a map of entire network on my Windows machine 7 Pro, the arrangements show on the map.

  These machines that I expect not to show on the map appear correctly under ""the next detected devices cannot be placed into the foreground.

  My question is - is there a restriction on the number of machines that can appear here and is there a way to increase this.

  If I have more than 8 machines which should be included here, only 8 appear. If I turn off one of those listed, one missing is displayed.

  Hello

  Thanks for posting your query in Microsoft Community.

  However, your question is beyond the scope of what is generally answered in this forum of consumer and would be better suited for the IT Pro TechNet public.

  Please post your question in the TechNet Forums.

• MDS-00013 may not find metadata in the metadata object

  Hello

  We have just improved Middleware 11.1.1.6 to 11.1.1.8 and our app is a failure because of the MDS-00013 error: no metadata not found for the metadata object '{0} '. the action defined in http://docs.oracle.com/cd/E12839_01/core.1111/e10113/chapter_mds_messages.htm says that I need to "confirm the name and the location of the metadata object, its existence in the metadata stores configured, and is it in an accessible namespace.

  Can someone please enumerate the steps I must follow to do this?

  I looked in the table metadata database and found an entry for the object and there is a file to this location when I export the metadata. I have no idea what to do now. Any help would be greatly appreciated.

  
  Thank you

  I now have access to a support account and read through the notes. None of them were applicable to my situation. It turns out that the server has been configured and our file extended.spaces.webapp.war was not active and so the customization process was only half deployed.

• Selection of setting inside the component af:table LOV

  Hi all

  I use Jdev 12 c.

  I can't find anything on the definition of the selection of a component of SelectOneChoice when it is inside a table.

  My use case: I'm iteration in a list of serial numbers, and ask a CreateWithParams liaison to a number of different parameters.  Those new lines appear in an af:table component.  One of these parameters can take the values 1, 2 or empty.  For this attribute, I have set up a selectOneChoice with a fixed/static LOV to the choice.  Now, the CreateWithParams is correctly set the value of the ViewObject line, but I don't know how to set the selection SelectOneChoice the correct value.  It is not done automatically.  Y at - it a way I can get the RichSelectOneChoice component in my managed java bean for each line so that I can manually set the selection of the component?

  Thanks for reading.

  Lance

  Solved the problem with a static list display object.  It was with my link layer.  The LOV was not part of the binding of the tree, so he was not updated correctly.  For those who have this problem in the future, put in place a static list view object and access it like a LOV in the view object related to af: table.

• AF:panelPage could not be found in the component Palette

  Hi all
  
  I use JDeveloper 11.1.1.5.0. I followed a tutorial into a book 'Oracle JDeveloper for forms' and PLSQL developers which is the use of Oracle JDeveloper 10 g. It is using facet of af: panelPage which is not available in JDeveloper 11 g.
  
  Can someone guide me how to include it in the component palette, or there is an alternative with a different name?
  
  Any help will be much appreciated.
  
  Thanks in advance
  Bilal

  Hello

  PanelPage is therefore more about. There is no direct successor for her element. The options you have is to create a custom page template and use it instead. See here:

  http://download.Oracle.com/docs/CD/E21764_01/Web.1111/b31974/web_getstarted.htm#BABJEDHG

  Frank

• Unable to set new owner - this security ID may not be assigned as the owner

  Environment:

  Windows XP Pro SP3, with Java project that is stored on a network named BIGDRIVE drive.

  Problem:

  A java jmsremote.password file must be read only by a specified user permissions.

  Location:

  Currently, properties/security lists everyone, nogroup [Unix Group\nogroup] and nobody not [User\nobody Unix], all with total control, because the users or groups associated with the file. I select Advanced, then the owners tab and

  Current owner is listed as a "person not [Unix User\nobody]"

  Two choices are listed in the change in ownership to: list as follows

  Administrators [BIGDRIVE\Administrators]

  Linux user... [BIGDRIVE\kirk]

  I can select one of these and apply, but get the message which is the title of this question.

  I am currently connected to XP ": administrator password" as far as I KNOW, so far did not know there was a 'user' associated with the drive on a network.

  What should I do to set the property and privileges of this file.

  Hello

  Your Windows XP question would be better suited in the Windows XP IT Pro Forum.  I suggest you to send your query to the link provided below.
  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

• ProBook 430 1: cannot update win8.0 to 8.1. Update bios to ver01.31 may not even go to the store to down load

  Hello

  I have this notebook since 2013 he was running windows 8.0 I try to update to woindows 8.1 without success. And I saw someone on the forum said if back BIOS do return to the old version 01.05. I tried it did not help. Then I try to update the bios to new worm 01.31 again.

  Now the computer take ages to initialize. «A disk shows committed a script error "and can't even go to the store and down load it say" your PC is not connect to internet...» "but my internet access and all the program works just slow down.

  What can I do now? Going back to the old version of the Bios? How? or you have any suggestions of upgrading to windows 8.1 or 10?

  Any help would be appreciated.

  Stanley

  Hello

  There seems to be some sort of software within the current Windows 8 this problem is why I suggested at the start you first perform a recovery back to a clean install without problem and then try to upgrade to Windows 8.1

  However, if you do not want to perform a recovery, try other things first. However, if this does not help, please perform a recovery and then go through the standard 8.0 - > 8.1 upgrade process.

  1 Please, check the clock and date of your Windows

  2. Please check the BIOS clock/date and correct them if necessary

  3. ensure the Windows user account control is enabled/Active

  3.1 reboot the computer

  4. make sure that you have applied all updates of standard Windows (Control Panel > Windows Update)

  4.1 reboot

  5. make sure you don't have any installed security software that may interfere with the particular process of network, firewall, etc.

  6 Please, run Troubleshooter Windows Update to find and erase errors > > http://windows.microsoft.com/en-us/windows/troubleshoot-problems-installing-updates#1TC=windows-8 |   http://go.Microsoft.com/?linkid=9830262

  6.1. restart the computer

  7, ensure that all drivers are updated - you can run the HP support assistant before that > > http://support.hp.com/us-en/document/c03467905

  7.1. restart the computer

  8 enforce Windows Store reset to clear the cache of WS and settings > > http://www.askvg.com/did-you-know-wsreset-command-to-clear-windows-store-cache-in-windows-8-and-later/

  9 restart the computer once more after the above suggestion

  Try to upgrade once more to 8.1 following the standard procedure:

  > > http://support.hp.com/us-en/document/c03847367

  > > http://www.gizmag.com/upgrade-windows-8--to-windows-81/29394/

  To answer one of your questions - it has no official option to upgrade to earn 8 to 8.1 without going through the Store for Windows 8 and Windows 8.0 Pro. Such an option is available for the Enterprise of Windows edition and it is not available publicly. When you use Windows 8.0 (standard home or Pro version) you can use store - that's how Microsoft decides it is.

  =========================

  If you try everything mentioned above and it still doesn't, please consider if you factory default recovery and then I think it should work according to the standard procedure (immediately after recovery and Windows updates) > > http://support.hp.com/us-en/document/c03847367

  =========================

  Please, I would like to know how this happens.

• Color calibrator may not work correctly, because the display does not fill screen.

  I have a Thinkpad W520 with 1920 x 1080 HD display and the color sensor. I tried to run the color standard application but always, she will work until the end but cannot process measures. So I opened the lid in the middle of a calibration and discovered that the color screen that is supposed to be seen by the sensor is not full screen, thus preventing the color measurement sensor. How can I set the graphics so that this application is displayed full-screen when executing? Thank you.

  Yes. But I just solved the problem. I set my display to display the text, icons, etc., to 150% of normal resolution. Somehow, he was causing the application displays only a partial screen. I set the magnification to 125% and now the standard color works very well.

• I had to make a movie for a class online, now, may not be downloaded for the assignment. I used the Director windows live

  How a movie can be downloaded at the transfer online using windows live Director?  I can't download on my assignment.  The other problem is I can not copy and paste into an another movie creater.  I don't have time to recreate the film.  Can anyone help?

  Thank you

  I was wondering what is the format of the film?

  If it happens to be. WLMP... which isn't a movie
  file. It's the project file that is useful for re-
  set-up Live Movie Maker.

  For sharing and playback in Windows Media Player
  Save the file as a movie in WMV format... the
  following link shows how to:

  How to save the project in Windows Live Movie Maker
  http://www.YouTube.com/watch?v=ZyqZm5MBc7o

• The status of the Volume and brightness may not be indicated on the screen

  Hi all

  I changed my system preloaded Home basic to Vista Ultimate, all the drivers are installed and seams are functioning normally. But when I pressed the Volume or by pressing brightness key hot key, I can see the volume and the brightness set but there is no status (process bar) on screen is displayed.

  A does anyone know how to fix this? Please kindly let me know. Thank you!

  PIN wrote: first of all, check the display screen, click APPLY/OK. But this is not enough. There is a bug, so the size is not really defined, and you see nothing. That's why you need to change the size in the windows registry editor. Click Start-> RUN-> type 'regedit' BE CAREFUL with this tool! Press CTRL + F... and see all the way "OnScreenDisplay": change of HKEY_CURRENT_USER\Software\IBM\TPHOTKEY\OnScreenDisplay 'Size' value of "00 00 00 00" to "00 01 10 10" (right click on "Size"-> select modify Binary data). "" " Close the registry editor. That's all.