error 0xBFF6001F cannot detect a recognizable video source

Hi all

I use HiSensemk II CCD camera. I'm trying to recover an image in MAX. But he said: "can not detect the recognizable video source.

What coluld be wrong with it?

Concerning

OK I solved the problem myself. I chose the img0: NI PCI-1428 off 4 selection of img. I don't know what is the difference with img1. Two of them is the same, but in any case, it works with img0

Tags: NI Software

Similar Questions

  • Error 0xBFF6001F when you use Basler acA2040-180kc and NI PCIe-1430

    Hi all

    I use a camera of the Basler acA2040-180kc and the NI PCIe-1430 to acquire images. I can't do a wink or a puncture in MAX now.

    1. I know I need to have the camera file in the devices NOR-IMAQ. Initially, I went to NOR-IMAQ devices/img 0: NI PCIe-1430/Port 0: / ni.com /Search camera (right click) and I downloaded the file from camera on the Industrial Camera Advisor Web site. This is the URL: http://sine.ni.com/apps/utf8/nipc.product?pid=11013&asid=1102. But when I tried to open, MAX gave me "error 0xBFF60108: the file of the camera does not support the current interface type.

    2. then, I found that I could use the camera file generator. I generated the file, and I could open in MAX. But after connecting the camera, I still couldn't make a wink or a puncture in MAX. He gave me "error 0xBFF6001F: could not detect a recognizable video source.»

    I don't know what the problem is now. I use a PoCL.MDR of 199745A - 05 National Instruments to DTS 5 M of cable. I plugged the camera link port 0 PCIe-1430 to port "B" at the back of the camera (I guess that means 'Base'). The LED on the back of the camera was not turned on, so I guess that it was not connected.

    Moreover, I also borrowed a Board NI SMU 1435 and DTS in two cables SDR to connect the camera. It worked. It says on the Industrial Camera Advisor Web site the NOR - hardware Compatible is NI PCIe-1433 and 1435-SMU-NI. So is this the reason? I have PCIe-1430 on the spot so I want to really use it.

    This is the first time to post a question. Thanks a lot guys!

    PoCL is Power-over-CameraLink and allows the framegrabber power the camera. (To my knowledge), PoCL cables are backward compatible for use in a situation of non-PoCL. Since the 1430 does not PoCL, you will need to feed externally. The connector between the ports of cameralink should leave you the power on the outside.

    The other problem is that this camera is a full-configuration camera while the 1430 supports only basic configuration. It would be possible to put the camera in a basic configuration of tab to reduced performance, but you will probably have to change the files to the device yourself.

    I think the easiest path would be to use the PCIe-1433 or complete PXI-1435 configuration (and also support PoCL).

    Eric

  • Windows Media Center cannot detect the error DVD Windows Media Center cannot detect a DVD in the DVD - ROM drive. Insert a video DVD into the drive

    Original title: why Windows Media Center does not detect my DVD?

    I built my computer motherboard ASUS P658D, Intel i7 processor clocked at 2.6 gHz, 12 GB RAM, 750W Corsair PWR. power, Windows 7 Home Premium 64 - bit & ie9. When I put or the other two DVDs in one of two DVD players, Windows Media Center appears and when I click on "Play DVD" Media Center give me a window that says:

    "Windows Media Center cannot detect a DVD in the DVD - ROM drive. Insert a video DVD in the drive." Two DVDs, I've tried are educational for DVD

    my Nikon D300 Digital camera and a family video DVD or both these very well play in a bed of same computer running Windows 7 Professional 64-bit, & ie8.

    I tried Microsoft Fixit, no help. I tried to send Microsoft Support, and I got NO HELP. I did not bring any changes, and installed any program, just

    scoured the internet. A DVD player is a Sony Optarc with Microsoft Driver, the other is ASUS. I also tried to use Windows Media Player but nothing

    rises or it returns me to Windows Media Center and it does not detect to play either of my DVD. How can I get help here, or from Microsoft? Thank you.

    No, there is no yellow warning in Device Manager and the device manager says that two DVD players work properly. Mr. Fix it's

    automated download from microsoft that is supposed to automatically fix some problems, but he provided no help here. I think it is more likely

    that there is a problem with Windows Media Center or Windows 7 Pro 64 bit and either of my two new Sony DVD drives

    and ASUS.

    I thought my way in a solution. My thought was: Device Manager indicates DVD players work properly and both are new and we're Sony, and the other ASUS so I think only an unlikely problem with readers. The problem is with Windows Media Center "do DETECTED is not the DVD. So there must be a problem with Windows Media Center. I thought that I might need to reinstall Windows 7... then I thought that maybe if I just reinstall Windows Media that will work. He did. My problem was:

    Start > Panel > programs and features > features on or off Windows activate > then uncheck the box for multimedia functions > restart the computer > and then re-check the box to restore the multimedia features > now both discs play both DVDs, I tried. Both disks are operating normally. Reinstall the characteristics of media Windows 7 resolved the problem. Thanks to all who offered solutions.

  • I uninstalled flash on my mac now youtube videos will not play. the error says safari does not recognize the video formats available.

    I uninstalled flash on my mac now youtube videos will not play.

    the error says safari does not recognize the video formats available.

    Reinstall the Flash Player... Why did you remove it?

    Barry

  • Cannot detect WLAN & error on device on Satellite L300D-11N Manager

    Hi, I hope you can help!

    I recently bought 2 notebooks of Toshiba L300D-11N for my DD for Christmas.
    I have the same problem with two laptops, where they cannot detect a network.

    In Device Manager, I get an error on an "unknown device" I think that's probably the network card, I can't find listed anywhere in the Device Manager. I don't have an option to repair the unit, only to uninstall or update the driver. I tried to update, but it says I can't.

    The wireless light is amber in color, which tells me means that the wireless in not active, but I can not allow it because the computer does not know its there if it makes sense!

    Anyone have any suggestions to help please?

    Thanks :)

    Do you mean the WLAN or LAN and what OS you have? XP or Vista?

    First you start the laptop, there is an image/installation of Toshiba with all drivers and tools, so not should do no more install to work with the model.

    You can download all the drivers on the Toshiba site: http://eu.computers.toshiba-europe.com
    Or you reinstall the notebooks with the recovery image. I think that s the easiest way, but you can try the new drivers first.

  • HP PAVILION DV4-3008TX: cannot detect Video card (Radeon 6750 m)

    Dear Sir.

    I would like to know why my laptop can't detect my graphics (Radeon 6750 m). It shows that construction graphic card intel. I already try to use system restore and restore the original factory mode. It will appear but after updating my drivers and restart my laptop.  My laptop cannot detect the video card again.

    Please help me solve this problem

    for you reference

    http://Tinypic.com/r/2it67ex/8

    You will need to activate the card Radeon HD using the Catalyst Control Center.

    Once you do that the adapter appears in Device Manager.

    If you use the Intel HD graphics card, only the graphics card Intel will be seen in Device Manager.

    I know that may seem strange, but it's one of the features of having a switchable graphics capable laptop computer.

    The following URL goes to a switchable graphics overview. Take a few minutes and read it. It should help to simplify the understanding.

    http://support.HP.com/us-en/product/HP-Pavilion-dv4-entertainment-notebook-PC-series/5048648/model/5072629/document/c03048374

    Not install the Intel graphics driver separateely!

    This interrupts the switchable graphics feature.

    Install only the HP ADM ATI graphics softpaq. It will install the two drivers automatically and allow you to use the graphics switchable featrure og your laptop.

  • Impossible to remove a file from the desktop, get the error message "cannot read the source file or disk.

    I can't delete a file from my counter top. Error message: cannot read the source file or disk. He is an Adobe file with logo in white box.

    Boot into safe mode and see if it will remove. If this is not the case, try this tool.

    Unlocker File Remover

    Download it from FileHippo
    http://filehippo.com/download_unlocker/

    Download from CNET
    http://download.CNET.com/WOT/3000-2378_4-75011499.html

  • WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D,.

    IM TRYING to re - INSTALL WINDOWS VISTA ON MY T-6321 to the front door, BUT WHEN I INSERT THE DISC, AND INSTALL, a MESSAGE APPEARS SAYING: WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D, SHOULD ALL BE ON THE DISCALREADY?

    Hi JRCLNSIN100,

     

    Welcome to Microsoft Answers Forums.

    We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

    ·         What is the disk you use to reinstall?

    ·         Is this a recovery or reinstalling the disc you are using?

    ·         When exactly do you get this error message?

    ·         What is the edition of Windows Vista, you try to install?

    ·         How old is the drive that you are using?

    ·         How are you starting the installation process?

    After researching the error 0x8007000D code is essentially due to file corruption and a problem with the drive itself.

    First check if you have scratches or dust on the disc and clean the surface and try again.

    To check if the disk is wrong, you will need to copy the contents of the DVD to the hard drive and try to install using that.

    To perform a flat installation of Windows Vista, follow these steps.

    Note The hard disk must have at least 3 GB of free space on the disk for the Windows Vista installation files. The hard disk must have at least 15 GB of additional disk space to install Windows Vista. For more information about system requirements for Windows Vista, see the Microsoft Web site at the following address:

    http://www.Microsoft.com/Windows/products/windowsvista/editions/SystemRequirements.mspx

    1. Insert the Windows Vista installation disc.
    2. Start Windows Explorer.
    3. In Windows Explorer, click to select the drive for the Windows Vista installation disc.
    4. On the Edit menu, click select all.
    5. On the Edit menu, click copy.
    6. Click to select the hard disk you want to contain the flat installation files.
    7. On the file menu, point to new, click the folder, type Windows Vista Setupand then press ENTER.
    8. Double-click the Windows Vista Setup program, and then click Paste on the Edit menu.
    9. Double-click Setup.exe, and then follow the instructions that appear.

    See the link below for more information on flat installation.

    How to perform a flat installation of Windows Vista

    http://support.Microsoft.com/kb/928902

    This problem can also occur if the firmware of the DVD drive is defective or obsolete.

    If the step above does not resolve the question suggests that you install the latest drivers for the DVD player on the computer.

    For more information please visit the link below.

    Error message when you try to install Windows Vista by using the DVD drive on the computer: "Windows cannot install required files".

    http://support.Microsoft.com/kb/930984

    Hope this information is useful.

    Let me know if it worked.

    All the best!

    Thanks and greetings

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Error when you try to play a DVD: Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings.

    Windows Media Player help

    I bought a netbook and have an external CD drive to dvd. When I want to play the video, I get this error.  I can't find a solution.  Any Advisor.  Error is... Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings.

    Hi Rains27,
     
    1. were you able to play the same DVD sooner?
    2. must arrive with a particular DVD or all of them?
    3. do you have a DVD decoder installed on your computer?
    4. you use starter edition of windows 7?
    5. What is the resolution on your computer?
    6. have you installed a codec on your computer?
    If you have installed a codec on your computer the I suggest you to uninstall the codec.
     
    Method 1:
    Try running Windows Media Player DVD Troubleshooter utility and check if this may help:
     
    Open the troubleshooting Windows Media Player DVD Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click
     
    Troubleshooting, click View all, and then click Windows Media Player DVD.
    http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-DVD-Troubleshooter
     
    Method 2:


    Method 3:

    Try to reduce the hardware acceleration again and check if it makes a difference.
     
    a. open the screen resolution by clicking the Start button, Control Panel, and then, under appearance and personalization, click on adjust the screen resolution.
    b. click on advanced settings, troubleshoot tab and then click on change settings.
    c. move the hardware acceleration slider toward none to reduce or turn off video hardware acceleration.
    d. click OK and then click Restart now.

    For more information, see this link: thanks and regards:
    I. Suuresh Kumar - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Can not upgrade Lightroom - ERROR: DS015: cannot read the target of the symbolic link to the source file

    Hello

    I'm trying to upgrade from Lightroom to the latest version on my last OS X 10.11 with all updates. The update fails with the error in the log:

    ERROR: DS015: cannot read the target of the symbolic link to the source file "/ Applications/Adobe Lightroom/Adobe Lightroom.app/Contents/Helpers/DynamicLinkMediaServer/application/dynamiclinkmediaserver.» app/Contents/amecommand.app/Contents/Dictionaries "Seq (30)"

    Please find attached the log.

    Thank you

    Dmitry

    26/07/16 15:26:48:532 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

    26/07/16 15:26:48:532 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | START - Installer Session

    26/07/16 15:26:48:532 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

    26/07/16 15:26:48:532 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Version of RIBS: 9.0.0.65

    26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | The OSX version: 10.11.6

    26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | : TIMER: [Total timer]

    26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | CHECK: Single Instance

    26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | CHECK: credentials

    26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Load deployment file

    26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | DeploymentFiles option not given

    26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | CHECK: Another installer native OS already running

    26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Create required folders

    26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Assuming the installation mode

    26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Search for path source install

    26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Media Sync DB...

    26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | : TIMER: [synchronize media DB]

    26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Pre check media db sync

    26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | End of pre check media db sync. Exit code: 0

    26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | : TIMER END: [media DB Sync] had 32 milliseconds (0.032 seconds) DTR = 15625 Kbps (15,2588 Mbps)

    26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Ready to initialize the session started by...

    26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | : TIMER: [CreatePayloadSession]

    26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | -START - updated media Sources - BEGIN-

    26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Update source path: /Users/username/Library/Caches/Adobe/AAMUpdater/AdobeLightroom-6.0/6.6.1

    26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Update media info for: {2C8CD39F-7A83-5516-B0CA-71BA5E60E7EF}

    26/07/16 15:26:48:534 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Ignoring the original being local installation source data

    26/07/16 15:26:48:534 | [INFO] |  | OOBE. OF |  |  |  | 2179470 |   Type: order 0, volume: 1, name of media: Lightroom 6

    26/07/16 15:26:48:534 | [INFO] |  | OOBE. OF |  |  |  | 2179470 |   Path: /Users/username/Library/Caches/Adobe/AAMUpdater/AdobeLightroom-6.0/6.6.1/payloads/AdobeLi ghtroom6-mul-210716042246/AdobeLightroom6-mul - 210716042246.zip

    26/07/16 15:26:48:534 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | -Updated media Sources - the END-

    26/07/16 15:26:48:539 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Support for the version of COAST range: [0.0.0.0,9.0.0.65]

    26/07/16 15:26:48:539 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | -CreatePayloadSession: the machine is x 86-

    26/07/16 15:26:48:540 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | _ Check _ subscribers dependence

    26/07/16 15:26:48:541 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Order of operation BEGIN all the payloads of session: library (requires, satisfied)

    26/07/16 15:26:48:541 | [INFO] |  | OOBE. OF |  |  |  | 2179470 |   Adobe Lightroom_6.6.1_AdobeLightroom6 - mul 6.6.1.0 {2C8CD39F-7A83-5516-B0CA-71BA5E60E7EF}: 0 (0.0)

    26/07/16 15:26:48:541 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | COMPLETE the operation order for all the payloads of session: library (requires, satisfied)

    26/07/16 15:26:48:541 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Patch Adobe Lightroom_6.6.1_AdobeLightroom6 - mul 6.6.1.0 {2C8CD39F-7A83-5516-B0CA-71BA5E60E7EF} can be applied to the product Adobe Lightroom 6.0.0.0 {8048A5DF-8A70-5BE1-954B-E0FDE1BD0D0D}

    26/07/16 15:26:48:636 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Setting the property "conflictingProcessInfo": /tmp/6800FD8F-2255-41DB-BDAC-3E2051C4867E/95C9D108-2A4B-4DD6-A99C-4AB76BBC4C6D

    26/07/16 15:26:48:636 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Setting the property "installSourcePath": /Users/username/Library/Caches/Adobe/AAMUpdater/AdobeLightroom-6.0/6.6.1

    26/07/16 15:26:48:636 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Definition of property 'mode': silencer

    26/07/16 15:26:48:636 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Setting the property "updateManifestPath": Users/username/Library/Application Support/Adobe/AAMUpdater/1.0/Data/AdobeLightroom-6.0/6.6.1/6.6.1.xml

    26/07/16 15:26:48:636 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Setting the property "workflow": update

    26/07/16 15:26:48:636 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Replace the "conflictingProcessInfo" property to: /tmp/6800FD8F-2255-41DB-BDAC-3E2051C4867E/95C9D108-2A4B-4DD6-A99C-4AB76BBC4C6D

    26/07/16 15:26:48:636 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Replace the "extensionsOnly" property to: 1

    26/07/16 15:26:48:636 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Replace the 'mode' property to: silent

    26/07/16 15:26:48:636 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Replace the "patchesOnly" property to: 1

    26/07/16 15:26:48:636 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Replace the "updateManifestPath" property to: Users/username/Library/Application Support/Adobe/AAMUpdater/1.0/Data/AdobeLightroom-6.0/6.6.1/6.6.1.xml

    26/07/16 15:26:48:636 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Replace the "workflow" property to: update

    26/07/16 15:26:48:637 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Find actions of payload:

    26/07/16 15:26:48:637 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Decide which mode of installation to use...

    26/07/16 15:26:48:638 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Setting START asked actions of payload

    26/07/16 15:26:48:638 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Value returned by searches for payload: Adobe Lightroom_6.6.1_AdobeLightroom6 - mul 6.6.1.0 {2C8CD39F-7A83-5516-B0CA-71BA5E60E7EF} is: false

    26/07/16 15:26:48:638 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | String action for Adobe Lightroom_6.6.1_AdobeLightroom6 - mul 6.6.1.0 {2C8CD39F-7A83-5516-B0CA-71BA5E60E7EF} is installed

    26/07/16 15:26:48:638 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Setting END asked actions of payload

    26/07/16 15:26:48:639 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Were collected advanced path check to INSTALLDIR

    26/07/16 15:26:48:639 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | INSTALLDIR is a correct path

    26/07/16 15:26:48:639 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | INSTALLDIR is not the root path

    26/07/16 15:26:48:639 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | INSTALLDIR is on a local volume

    26/07/16 15:26:48:639 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | INSTALLDIR is on a volume that is accessible in writing

    26/07/16 15:26:48:639 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | INSTALLDIR is not on a case-sensitive volume

    26/07/16 15:26:48:639 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | INSTALLDIR successful path validation database path: / applications

    26/07/16 15:26:48:731 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Operations START InstallOperationsQueue unordered

    26/07/16 15:26:48:731 | [INFO] |  | OOBE. OF |  |  |  | 2179470 |   Adobe Lightroom_6.6.1_AdobeLightroom6 - mul 6.6.1.0 {2C8CD39F-7A83-5516-B0CA-71BA5E60E7EF}: operation to install

    26/07/16 15:26:48:731 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Unordered InstallOperationsQueue to END operations

    26/07/16 15:26:48:731 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | START InstallOperationsQueue ordered operations

    26/07/16 15:26:48:731 | [INFO] |  | OOBE. OF |  |  |  | 2179470 |   Adobe Lightroom_6.6.1_AdobeLightroom6 - mul 6.6.1.0 {2C8CD39F-7A83-5516-B0CA-71BA5E60E7EF}: operation to install

    26/07/16 15:26:48:731 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | END InstallOperationsQueue ordered operations

    26/07/16 15:26:48:737 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Payloads were committed before the flight.

    26/07/16 15:26:48:737 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Call pre-sessional custom Hook

    26/07/16 15:26:48:737 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Operations START InstallOperationsQueue unordered

    26/07/16 15:26:48:737 | [INFO] |  | OOBE. OF |  |  |  | 2179470 |   Adobe Lightroom_6.6.1_AdobeLightroom6 - mul 6.6.1.0 {2C8CD39F-7A83-5516-B0CA-71BA5E60E7EF}: operation to install

    26/07/16 15:26:48:737 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Unordered InstallOperationsQueue to END operations

    26/07/16 15:26:48:737 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | START InstallOperationsQueue ordered operations

    26/07/16 15:26:48:737 | [INFO] |  | OOBE. OF |  |  |  | 2179470 |   Adobe Lightroom_6.6.1_AdobeLightroom6 - mul 6.6.1.0 {2C8CD39F-7A83-5516-B0CA-71BA5E60E7EF}: operation to install

    26/07/16 15:26:48:737 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | END InstallOperationsQueue ordered operations

    26/07/16 15:26:48:821 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Call the code to the custom action for the pre-installation for payload Adobe Lightroom_6.6.1_AdobeLightroom6 - mul 6.6.1.0 {2C8CD39F-7A83-5516-B0CA-71BA5E60E7EF}

    26/07/16 15:26:48:821 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | : TIMER: [operation payload: {2C8CD39F-7A83-5516-B0CA-71BA5E60E7EF}]

    26/07/16 15:26:48:822 | [INFO] |  | OOBE. OF |  |  |  | 2179572 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

    26/07/16 15:26:48:822 | [INFO] |  | OOBE. OF |  |  |  | 2179572 | Operation of the installer: PayloadInstaller

    26/07/16 15:26:48:822 | [INFO] |  | OOBE. OF |  |  |  | 2179572 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

    26/07/16 15:26:48:822 | [INFO] |  | OOBE. OF |  |  |  | 2179572 | Request to install the payload

    26/07/16 15:26:48:823 | [INFO] |  | OOBE. OF |  |  |  | 2179572 | Adobe Lightroom_6.6.1_AdobeLightroom6 - mul 6.6.1.0 payload {2C8CD39F-7A83-5516-B0CA-71BA5E60E7EF}: ARKEngine component of path Applications/Utilities/Adobe Application Manager/DECore/6/resources

    26/07/16 15:26:48:841 | [INFO] |  | OOBE. OF |  |  |  | 2179572 | Extraction of asset:/Users/username/Library/Caches/Adobe/AAMUpdater/AdobeLightroom-6.0/6.6.1/payloads/A dobeLightroom6-mul-210716042246/AdobeLightroom6-mul - 210716042246.zip

    26/07/16 15:26:48:841 | [INFO] |  | OOBE. OF |  |  |  | 2179572 | Affecting false in the unzipper file open option

    26/07/16 15:27:36:874 | [INFO] |  | OOBE. OF |  |  |  | 2179572 | All self-extracting assets. Number of assets: 1

    26/07/16 15:27:36:874 | [INFO] |  | OOBE. OF |  |  |  | 2179572 | CustomizedPatch property not found in the database

    26/07/16 15:27:36:875 | [INFO] |  | OOBE. OF |  |  |  | 2179572 | Begin the installation of payload to /Users/username/Library/Caches/Adobe/AAMUpdater/AdobeLightroom-6.0/6.6.1/payloads/AdobeLi ghtroom6-mul-210716042246/Install.db

    26/07/16 15:27:36:947 | [ERROR] |  | OOBE. OF |  |  |  | 2179572 | DS015: Cannot read the target of the symbolic link to the source file "/ Applications/Adobe Lightroom/Adobe Lightroom.app/Contents/Helpers/DynamicLinkMediaServer/application/dynamiclinkmediaserver.» app/Contents/amecommand.app/Contents/Dictionaries "Seq (30)"

    26/07/16 15:27:36:947 | [WARNING] |  | OOBE. OF |  |  |  | 2179572 | DW063: The ARKCopySymlinkCommand command failed. (30 Seq)

    26/07/16 15:27:36:947 | [INFO] |  | OOBE. OF |  |  |  | 2179572 | End of the installation of payload to /Users/username/Library/Caches/Adobe/AAMUpdater/AdobeLightroom-6.0/6.6.1/payloads/AdobeLi ghtroom6-mul-210716042246/Install.db

    26/07/16 15:27:38:161 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | * = * = * = * = * = * = * = * = * = * = * = * = * = * = * = * Operation completes. Statut : 2 = * = * = * = * = * = * = * = * = * = * = * = * = *

    26/07/16 15:27:38:161 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | : TIMER END: [operation payload: {2C8CD39F-7A83-5516-B0CA-71BA5E60E7EF}] took 49342 milliseconds (49,342 seconds) DTR = 14796 Kbps (14,4492 Mbps)

    26/07/16 15:27:38:163 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | OverrideFile specified user:

    26/07/16 15:27:38:164 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | The inventory of the csu was not updated for Adobe Lightroom_6.6.1_AdobeLightroom6 - mul 6.6.1.0 payload is {2C8CD39F-7A83-5516-B0CA-71BA5E60E7EF}, the value of the local var - 1

    26/07/16 15:27:38:165 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Asking the pre-installation for payload Adobe Lightroom_6.6.1_AdobeLightroom6 - mul 6.6.1.0 RESTORE custom action code {2C8CD39F-7A83-5516-B0CA-71BA5E60E7EF}

    26/07/16 15:27:38:292 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | No operation.  We finished:

    26/07/16 15:27:40:302 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Total number of installed components: 0

    26/07/16 15:27:40:302 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Total components repaired: 0

    26/07/16 15:27:40:302 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Total number of removed components: 0

    26/07/16 15:27:40:302 | [WARNING] |  | OOBE. OF |  |  |  | 2179470 | DW050: The following payload errors were found during the installation:

    26/07/16 15:27:40:302 | [WARNING] |  | OOBE. OF |  |  |  | 2179470 | DW050: - Adobe Lightroom_6.6.1_AdobeLightroom6 - mul: installation failed

    26/07/16 15:27:40:302 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Call post-Forum custom Hook

    26/07/16 15:27:40:302 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | : TIMER END: [Total Timer] took 51895 milliseconds (51,895 seconds) DTR = 15131,4 Kbps (14,7768 Mbps)

    26/07/16 15:27:41:307 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | -------------------------------------- Summary --------------------------------------

    26/07/16 15:27:41:307 | [INFO] |  | OOBE. OF |  |  |  | 2179470 |  -0 fatal Error (s), 1 Error (s)

    26/07/16 15:27:41:307 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | The OSX version: 10.11.6

    26/07/16 15:27:41:307 | [INFO] |  | OOBE. OF |  |  |  | 2179470 |

    26/07/16 15:27:41:307 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | -Payload: Adobe Lightroom_6.6.1_AdobeLightroom6 - mul 6.6.1.0 {2C8CD39F-7A83-5516-B0CA-71BA5E60E7EF}.

    26/07/16 15:27:41:307 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | ERROR: DS015: cannot read the target of the symbolic link to the source file "/ Applications/Adobe Lightroom/Adobe Lightroom.app/Contents/Helpers/DynamicLinkMediaServer/application/dynamiclinkmediaserver.» app/Contents/amecommand.app/Contents/Dictionaries "Seq (30)"

    26/07/16 15:27:41:307 | [INFO] |  | OOBE. OF |  |  |  | 2179470 |

    26/07/16 15:27:41:307 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Please find the error string above to find when the error occurred.

    26/07/16 15:27:41:307 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | These errors resulted in installer exit code mentioned below.

    26/07/16 15:27:41:307 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | -------------------------------------------------------------------------------------

    26/07/16 15:27:41:307 | [INFO] |  | OOBE. OF |  |  |  | 2179470 |

    26/07/16 15:27:41:307 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Exit code: 7 - could not complete the silent workflow.

    26/07/16 15:27:41:307 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Please see specific errors for troubleshooting. For example, ERROR: DS015...

    26/07/16 15:27:41:307 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

    26/07/16 15:27:41:307 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | END - Installer Session

    26/07/16 15:27:41:307 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

    Hi PDS,

    Thanks for sharing of the log file, it helps us to understand the root cause of the problem and help your best and fast, according to the newspaper shared the main error is 'Code output 7', I recommend you to try the solutions in the following link and share the results:

    Errors 'Exit Code 6' and 'exit 7 "Code install Adobe CS6, CS5.5, CS5, Premiere Elements and Photoshop Elements.

    Waiting for your response.

  • 25xi Pavilion: Pavilion 25xi cannot find video sources! Help!

    My monitor of 25xi Pavilion serves me for almost a year now, but rather all at once, a serious issue was raised.

    I was helping a friend fix a few problems with his HP 2511 x, being understood that we had similar monitors, and I had exchanged with his computer monitors. My flag has acted very well on my friends computer, whereas he knew that his monitor is having problems. But when it came time to return my monitor on his computer that deserves it, it now seems to be stuck searching through video signals before settling on the mode finially 'sleep'. My monitor worked perfectly previously.

    After some tests, I noticed that when it is plugged into HDMI and VGA, the monitor seems to linger to seconds about 2 or more before moving on. I could not reset to factory settings because the monitor needs to find a source before doing so. Although, I have reset the screen using my friend's computer.

    My monitor had been not a single scratch since I bought it, and all ports appear to be functional, clean and intact. Strangely, no signal at all can seem to get to my monitor at the moment.

    any help would be appreciated!

    Hello @guerrjos18,

    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

    I read your post on how your monitor is not able to find video sources when you reconnect to your computer, and I'd be happy to help you in this case!

    I provided you with a few steps, you can try below:

    Step 1. Unplug the power cord at the back of the screen and the wall
    Step 2. Press and hold the power button for at least a minute
    Step 3. Plug the power cable in the monitor, and then to the wall outlet
    Step 4. Press the Menu button on the monitor
    Step 5. Navigate to the factory reset option and select
    Step 6. Try a different cable to connect your monitor to your computer

    If the steps above did not resolve your issue, you can try the monitor on a computer or other device to see if the problem persists. If the monitor does not have still not all video sources, please call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

    http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

    Thanks for posting on the HP Forums. Have a great day!

  • My Aspire V7 582PG cannot detect external monitors

    I recently bought an Aspire V7 582PG, put in a new SSD and then installed Windows 8. The laptop works well, except that it cannot detect external monitors (in Control Panel, I get "Has not detected a different view".) I tried with 2 monitors (different models) that are known to work, via HDMI and VGA.

    I thought it might be a driver problem. Device Manager > 'Graphics cards' show 'Display card base Microsoft' and 'NVidia GEForce GT 750 M. The two drivers are up-to-date. 'Monitors' shows 'generic PnP monitor", which is also updated.

    Then I went to http://us.acer.com/ac/en/US/content/drivers to download the driver for my model. The only one who had the relevant air was:

    MonitorELANTECHThe HID monitor drivers1.1.5

    Installer here: http://global-download.acer.com/GDFiles/Driver/Monitor/Monitor_ELANTECH_1.1.5_W8x64_A.zip?acerid=635...

    But when I unzip and run the Setup window closes a few seconds; I think it hangs, rather than installing correctly.

    Any suggestions?

    My Acer tabs they need additional drivers to recognize the HDMI port.

    I think having unzipped in a directory and open a DOS window with admin rights and run the application inside that. At least if an error occurs, you should be able to see. Sometimes just doubleclicking opens and closes a window so fast that you do not see the error.

    Also in looking at support for a 'ultra' V7, I see several drivers for the chipset VGA and monitor. All may be required for the video display to work.

    You see multiple devices when you press Windows-P?

  • "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".

    Original title: when setting up Windows Media Center, I get the error message: "IR hardware not detected".

    I have an internal TV Tuner that has been installed by HP, when I bought recently a "computer build-your-own." (According to the control panel Device Manager, my tuner is a Win TV HVR 1290, made by Hauppauge). The computer came with Windows 7. While installing Windows Media Center, after setting up the TV Signal (on channel 3) I am able to see a video thumbnail on my computer screen. I am also able to change the channel using my remote control U-Verse (not the Windows remote control supplied with the computer). So far so good! I then hit next and get the following message: "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".  After you receive this message, the installation procedure is completed. I called HP that support intalled the tuner. They had not the slightest idea what to do. I then called Hauppage customer (manufacturer of TV Tuner). They said that I need to plug one end of the IR Blaster cable that shipped with the computer in a slot in the back of my computer (they told me which slot). They said so to run the IR all the way cable to my cable box and the other end of the cable to my cable box of band. They said it was necessary to be able to use my Microsoft Remote to instruct the box to change channels (cable IR stuck on the box). I told her that I did not use the Microsoft Remote, I could change the channel with my U-verse remote (that I preferred to use anyway). He said that it took the cable on the band decoder in order to remove the error message and the installation of Windows Media Center. I then called U-Verse technical adapter who informed me of their set-top boxes (made by Cisco Systems) do not have the ability to receive signals IR IR Blaster cable (or any othe IR signal source). Microsoft is apparently not understand how U-Verse set-top boxes are designed to work and sells a product incompatible remote control/IR. My question is this: How do I set up Windows Media Center, in order to avoid getting the error message "IR hardware not detected" when you install Windows Media Center and just use the remote control of the U-Verse that I prefer to use in the first place. Once understand you this point, please send the information to HP, At & T U-Verse and others. Thank you.

    Ron, I have something for you!

    and for all the people who have this problem :)

    Hi, I had the time of IR not detected in Windows 7 Ultimate with a TV wonder 650 card and a box of digital adapter from Verizon for my PC... Go on the road to installation and after the Media Center channel search, choose manual configuration. Choose the aerial signal (I aso picked after this analog) l. After he sought more, he finds no channels.  Do not be afraid. Just accept it and go to the main settings page in the Mediacenter. If I remember correctly, then select TV Guide. Choose Add channel. I added the channel 3.

    Since my Verizon box has no IR for the computer, I added the channel 3 for the media Center and I change the channels with my Verizon remote. All my stations in the Verizon box go to Channel 3.

    The story here is so, for some reason any Windows detects that only my box channel signal TV and you must manually configure the media center on the air, then go to settings and add the channel you want in the guide.

    Why the guide TV control which channel you can tune is beyond me, but the scanner locks all channels, it does not detect. they must be added manually in the guide.

    My TV works and looks okay now.

    It actually works!

    the only problem is that it is not in HD

    but there is something


  • HP 8600 over Error Message: paper detected does not match format of paper or type selected.

    HP Officejet Pro 8600 more

    Windows XP Pro, Windows 7 Pro

    Error message: paper detected does not match format of paper or type selected

    This error message appears on the printer display panel any time a custom paper size has been set up in Word (or any other application) and the format of paper & type was inserted in the Officejet Pro 8600 paper tray.  This error is generated by the printer regardless the orietation or margins or paper size settings in the document to match the paper size in the paper tray.  When you press 'OK' on the printer display panel, the printer ejects paper correctly.  Because this printer lacks a manual bypass tray, the custom paper is always inserted in the Tray1 and is the only book in this tray 1.  It's a simple tray 8600 more.

    What I am doing wrong?

    Your help is greatly appreciated.

    Unfortunately, you cannot print on a paper size "undefined" with printers. While the functionality is available in word, our printers do not recognize that the sizes of the main paper (these changes according to the country sometimes).

    The reason for this is because undefined paper sizes open the printer and the print job to a certain number of risks, including jams paper or misaligned printing. This is why the function is no more on HP printers.

    I recommend to find a type of traditional paper which is close to the size you want to print on and select in the layout of the print job as a workaround for this problem.

    I hope this helps!

  • computer cannot detect the scanner or camera

    When I plug in my digital camera Canon for my xp, then turn it on, I hear a small beep, then nothing. When I go into the Panel, printers and other equipment, scanners and cameras, I see 2 points. 1 is, WIA Canon MX310 SER. The 2nd one is Canon PowerShot SD1300IS. I then click on the Canon PowerShot SD1300IS and then get pictures, but nothing happens. The cameras screen display turns off, but that's all. It seems to be connected to the computer, but not to download pictures.

    When I keep trying I sometimes get an error message, the computer cannot detect the scanner or camera.

    How can I solve this problem and download my photos?

    Thank you Tim

    Hey volunteer J;

    Thanks for the help, but it did not help.

    I found the answer on page 2 of microsoft answers, xp, images and videos.

    6 questions down, how to re install microsoft scanner and Camera Wizard.

    It turns out that some tech volunteer known as J (is it you?} came across the solution to my problem on this site:http://www.veiled-chameleon.com/weblog/archives/000231.html )

    I have used PC Cleaner on this xp, and I think he may have disabled some of the registry keys. For me, I had to start my pitcher of DCOM Server, RPC, Remote procedure Call Locator process and put them on automatic. Once I rebooted, everything works great.

    I'm so happy that tech Volunteer J, done everything search last December. I bet it helped a ton out of veterans with our cameras. How did he find veiled Chameleon? Wow he must be smart enough.

    Thank you for volunteering j. (is it you?)

    Thank you Tim

Maybe you are looking for