Error 1005.

Similar Questions

• 1245 dv7 laptop / Vista OS upgraded to win 7 Pro motherboard / news / error 1005

  So connected and using my laptop, he spends the white screen-to-screen saver.  When I tried to turn it on, I got only a flashing light.  I sent the laptop in a program of insurance-for repair.  They have installed a new motherboard and said that my OS is slow and that my battery was no longer functioning.  Before taking out the motherboard, these were not problems.  I am unable to get the option wireless and I kept getting a message that my OS is not a genuine product.

  As suggested, I started to reset the unit to factory settings.  I inserted the recovery disk and began performing the recovery.  He started to download files and went on for several minutes, then I got the error 1005.  (several times)  I rebooted the recovery and tried to get the recovery to run from the hard drive, but he must have already formatted the hard drive.  When you try this I get "no boot device - insert boot disk and press any key".

  Thanks in advance for any help.

  You can try to download an iso of Hiren's boot CD and run HDAT2 tool 4.9B1 will be to repair and test your drive HARD, or HDD Regenerator if you

• YouTube share error (error com.google.HTTPStatus - 1005).

  Hi all

  I have a nagging question when you try to share my video on Youtube.  90%, I get the following error message: publish on YouTube has failed: the operation could not be completed. (com.google.HTTPStatus error - 1005).

  My video is 18 minutes long, but my Youtube account is verified.  In addition, last week, I posted a minute 17 video using the same method without any problem.

  Any idea what the problem might be?

  Thank you all.  I'm going nuts trying to figure out this one.

  Nelson

  It seems to indicate a problem on the YouTube server. They often change things. Try to redo the identification or information using the uploader on their Web site.

• 1005, during the installation of Nero 9 application error

  I have an application error 1005 when installing Nero 9, how I overcame the problem, also I can not tear or burn music, which I think is down from this error message.

  Contact Nero support.

• Recovery MAnager does not - stops at Midway

  Hello

  
  

  I'm trying to restore my HP Pavaillion to the factory setting. I insert the disc of recovery manager supplied with the computer. However, he never goes from 44 percent complete. On the contrary a read error '1005 error if the problem persists, contact HP support' is displayed. (See attatched photo). How can I fix it?

  Additional information:

  The reason why I'm trying to restore my PC to factory settings, it is that is no longer able to boot. For some time I could start through the Windows 7 disc, but now I can't do same.

  Additional information:

  If it is possible to fix my computer without restoring to factory settings, that would be great I have a certain number of files it contains. The computer stopped booting all around the period I, 1) update Norton 360 and 2) installed Tablet Intuos Wacom. Notron 360 caused earlier problems with my PC (Blue Screen of Death by updating Norton 360) but I don't know if it's the cause again now. This could be the Tablet, as I played around with the settings (specifically, I changed these services automatically start Manual [Service of stylus, Tablet PC Input Service, Wacom Touch Customer Service] and I also have desselected features Windows Tablet). I did this because the Tablet has been rarely connected to the computer, but the processes that have been continuously running despite the fact that the tablet was not connected, (when we look in the Manager tasks) used a lot of memory. If you think that one of the two above (Norton or Wacom) causes, let me know and I will send you more information.

  If not for now, I guess I would say goodbye to all my files and default factory settings - IF HE WOULD ACTUALLY restore instead of give 1005 error messages.

  Thanks for any help

  

  Uncanny101 wrote: Hello, I have been unable to find the functionality you're talking about. This is the screen that appears when I press F10, select Advanced. I'm looking in the right place?

  

  Hello Uncanny101, the recovery restore partition may have been deleted. If it did, you wouldn't be able to use the F-10 or F - 11 key to access.

  You should be able to perform a new install with a Windows 7 disk, if there is no hardware failure.

  Just insert the Windows 7 in the optical drive and start the system. When you get to the place where you are asked where to install the operating system, look at the bottom of the page and you should see the partition. You should see two partitions, one of 100MBs more. Let the small partition of 100 such MB, because it contains the Windows 7 installation files. Select this option to remove the larger partition, and then create a new partition, quick format the new partition to continue.

  This should allow you to install a fresh Windows 7. You lost all the data you have added since you have the system, but because the installation failed, these data are probably already lost.

• CQ50-NR215: bad recovery

  This Compaq CQ50-NR215 continued to get slower over time. It was purchased at BestBuy and came with (2) "GeekSquad" recovery CD - as opposed to a Microsoft OS disk? The backup of my data, I went with Disk1 - which he said successfully did something with the partition. Second step was installing original software. He won this stage and gave ERROR 1005. After removing the CD, the laptop did not start, indicating that a device in the boot sector was not present.

  It so happened that I had a CD of Vista operating system from another computer so I inserted the CD and tried to restart. After asking to fix/install windows (I chose install), he seemed fine. The welcome message appears & says "Prepearing your DESKTOP computer for first use. It starts very well, the user interface appears intact. The problem-

  The WLAN light on the laptop which is red when this is turned off/blue when on remains-red & will not turn on. In the Device Manager, I can't find any network card. A section called "Other devices" is highlighted in yellow indicating a question - when you select other devices, a submenu appears, and the following list is present (see photo)

  Coprocessor

  Ethernet controller

  SM Bus controller

  Unknown device.

  Download section of the HP driver, I downloaded what I thought, it is maybe the chipset suitable for a flash drive, then moved to the computer laptop & installed. Still nothing.

  It was suggested that I be able to plug an ethernet straight cable from my router to the laptop and access than average internet - failed, no access.

  My first impressions are that the CD I have installed from was designed for an older desktop computer, not having no internal not the software to make use of the wifi.

  Any help is greatly appreciated. I can't believe so much is wrong with her, that she needs a few hundred dollars in a computer repair shop - when the value of this cell of aging is certainly lower than that.

  You are the very welcome.

  Try these drivers for the wireless card and the unknown device...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-108905-1 & CC = US & DLC = in & LC = on & JumpID = reg_r1002_usen_c-001_title_r0004

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-80784-2 & CC = US & DLC = in & LC = on & os = 2093 & Product = 3795238 & sw_lang =

  Your screenshots didn't erase the censorship screen yet, so I can't see them.

  Once they clear, I'll see what else could be the problem.

• HP Recovery - EMERGENCY!

  I have a laptop HP G60 that has a recovery partition and I have 2 recovery disc for it - it is a Vista operating system.
  
  Recently I've been using Windows 7 on it, and I wanted to go back to Vista using the recovery option.
  
  However, using the partition, I get ERROR 1003
  
  So I tried the discs, but after 20 minutes of disk 1, I get ERROR 1005
  
  Now my laptop has no operating system and I can't get my phone to factory settings at all.
  
  Now, my first thought is that the recovery partition is corrupted, whereby the cd access when recover (?), so I wonder now whether to delete the recovery partition (how without operating system), then try again the discs?
  
  Help, please! Thank you.

  Try to start with a utility cd to remove the partition / format hard drive. I read good reviews for Partition Wizard. Download the iso CD bootable here . Download ImgBurn here to burn the image to a cd.

• HP Pavilion elite e 9160f resinstall questions

  blue screen. used the recovery disk, but all the system restore had been erased. run all the scans of disk and memory. all came back OK. I have all 4 drives HP for vista. So far so good. a few hours later, all the files have been on my HD, ready to be installed. all right, at this point. DO NOT restart or shut down the PC before vista asking you to do. Very well! I finally see the logo windows vista in the middle of my screen, but before I could get to my PC, it restarts automatically, and it starts again with the white screen and two folders, copy files. Once again! so, I left it alone for about 3 hours, and since he copied again, just stop it. This morning, it gives me an error 1005. I run a scan disk hard 1 and 2 test seeking answers on the net. mainly what happened last night, when everything seems to go so well? Thank you Shawn

  Have you disconnected all external printers devices, etc.?

   

  Troubleshooting Recovery HERE can help.

• Installation of Photoshop elements 12 problems

  Photoshop elements 12 installs on a platform Windows XPSP3 (from C:\Documents and Settings\UserName\Desktop\Adobe Photoshop elements 12).

  On a platform of Windows 7 SP1 C:\Users\...\Desktop\Adobe Photoshop elements 12, but does not

  Application Error 1000 error caused by PhotoshopElementsEditor.exe followed by

  Error: 1005 (100)

  Description: Windows cannot access the file for the following reasons: there is a problem with the network connection, the file is stored on the disc or the storage drivers installed on this computer. or the drive is missing. Windows has closed the program Photoshop elements 12 editor because of this error.

  The same source installation file has been used in bith installs.

  installation using the compatibility mode can be easier to solve the problem.

• recovery stops at 2% with error message "1005".

  My neighbor gave me his Pavilion dv5 - 1044ca to watch. She said she had fixed 2 years ago and never it has never worked since. When I boot it it reads "No device detected - start insert the startup disk and press a key" think there is a HARD question dock drive I removed the HARD drive and plugged into my drive. The drive is has 2 partitions is a recovery partition, the other is not empty no file what so ever. So I think that when they fixed 2 years ago, they must have replaced / reformat the drive and never reloaded the operating system. I asked if she has ever received records. She give me two discs with HP recovery written on them. I was able to get into the Recovery Manager and it loads to the 2% mark and has frozen with the message "error contact HP 1005". Tried several times but never gets beyond the 2%.

  Any help you could give me would be greatly appreciated.

  I have solved the problem... Read in another forum that the recovery disk must be written on DVD + r is not and here I have the recovery disk have been written about format - a. copy the image to the right format and got exceeded the 2% and 6 minutes from completion.

• Event 1005, Application error

  Hello!

  My hard drive has started to freeze at random all the time when I use the computer. Weather that would be there when I'm browsing the internet. opening a folder or a game, it freezes for a few seconds. The program that I currently use plant ("this program is not responding") and after 3-4 seconds it starts working again. I ran the disk error checking tool, but he found nothing. In the case of the spectator, I got the following error:

  Windows cannot access the file C:\ProgramData\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010008.ci to one of the following reasons: there is a problem with the network connection, the file is stored on the disc or the storage drivers installed on this computer. or the drive is missing. Windows has closed the Microsoft Windows Search Indexer program because of this error.

  Program: Microsoft Windows Search index
  File: C:\ProgramData\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010008.ci

  The error value is listed in the additional data section.
  User action
  1. open the file again. This could be a temporary problem that can be corrected when the program runs again.
  2. If the file is still not accessible and
  -C' is on the network, your network administrator must verify that there is not a problem with the network and that the server can be contacted.
  -C' is on a removable disk, for example, a floppy disk or a CD-ROM, check that the disc is inserted into the computer.
  3. check and repair file system by running CHKDSK. To run CHKDSK, click Start, run, type CMD and then click OK. At the command prompt, type CHKDSK /F and then press ENTER.
  4. If the problem persists, restore the file from a backup copy.
  5 determine whether other files on the same drive can be opened. If this is not the case, the disc could be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for assistance.

  Additional data
  Error value: C0000185
  Disc type: 3

  I find the files and follow the instructions, it tells me to open the it, but the file is in a format that I can not open, so the first step is not feasible. The disc is inserted in the computer as far as I know and is not on a removable drive. I have ran the CHKDSK but don't have any errors. What can I do now?

  Select Start, Control Panel configuration, Indexing Options, advanced, rebuild.

  http://www.SevenForums.com/tutorials/17880-index-rebuild.html

  Reconstruction of the index often takes a long time, literally in hours, and using computer, while the procedure is running is not a smart move as it does take a lot longer.

• HP DL380 G4: Download driver HP DL380 G4 - could not open page error

  I want to download the driver for HP DL380 G4, for 32-bit Windows Server. Driverpage selecting OS site returns with the error:

  Could not open page
  The service or the information requested is not available at this time.
  Please try again later.

  (Error: system-websrv_unavail)

  Please try again, I just tried the website and page pilot is appeared:

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=426678&swLangOid=8&swEnvOid=1005

• recovery CD gives different errors each time?

  Media Center M7760N Vista Home premium cd created by creator of recovery in 2007, never need to use so far.

  whenever I try to install the os I get error messages this time a 1005.  Before, I received \fw\?linkid c:\windows = 50163 & clcid-0 x 0409.  I ran the disk bootable diagnostic pc supplied with all past system.  following error when I tried once again gave me C:\windows\system32\dwmapi.dll.  Cannot order recovery CD because of hp that they are not listed.  so please help how can I solve this problem.

  OK I fix my problem, I removed the extra memory I had installed after the recovery cd once I removed them I could get into wood using my restore cd that were created when I buy the hp media center M7760.  So overall all is well and I'm a happy camper

• WindowsUpdate: SelfUpdate check failed download package information, error = 0x80070005

  Windows Update does not work. However, I can download and install updates manually on microsoft.com. But it does not work automatically.

  To resolve this problem, I tried this:

  http://Windows.Microsoft.com/de-de/Windows7/Windows-Update-Error-80070002

  and this:

  http://support.Microsoft.com/mats/windows_update/de

  The data content of WindowsUpdate.txt:

  2011-11-23 19:28:37:945 120 9 d 4 Misc = logging initialized (build: 7.5.7601.17514, tz: + 0100) =.
  2011-11-23 19:28:38:023 120 9 d 4 Misc = process: C:\Windows\system32\svchost.exe
  2011-11-23 19:28:38:023 120 9 d 4 Misc = Module: c:\windows\system32\wuaueng.dll
  2011-11-23 19:28:37:789 120 9 d 4 Service *.
  2011-11-23 19:28:38:023 120 9 d 4 Service * START * Service: Service startup
  2011-11-23 19:28:38:039 120 9 d 4 Service *.
  2011-11-23 19:28:38:585 120 9 d 4 Agent * WU client version 7.5.7601.17514
  2011-11-23 19:28:38:585 120 9 d 4 Agent * Base Directory: C:\Windows\SoftwareDistribution
  2011-11-23 19:28:38:585 120 9 d 4 Agent * access type: no proxy
  2011-11-23 19:28:38:585 120 9 d 4 Agent * network state: connected
  2011-11-23 19:29:24:387 120 9 d 4 CWERReporter::Init report was successful
  2011-11-23 19:29:24:387 120 9 d 4 Agent * Agent: initialization of Windows Update Agent *.
  2011-11-23 19:29:24:387 120 9 d 4 Agent * Agent: initialization of the global parameters cache *.
  2011-11-23 19:29:24:387 120 9 d 4 Agent * WSUS server:
  2011-11-23 19:29:24:387 120 9 d 4 Agent * state WSUS server:
  2011-11-23 19:29:24:387 120 9 d 4 Agent * target group: (Unassigned Computers)
  2011-11-23 19:29:24:387 120 9 d 4 Agent * Windows Update access disabled: No.
  2011-11-23 19:29:24:418 120 9 d 4 DnldMgr Download manager restoring 0 downloads
  2011-11-23 19:29:24:465 120 9 d 4 to THE # to THE: initialization of automatic updates #.
  type of approval # to THE 120 9 2011-11-23 19:29:24:480 d 4: on demand (user preference)
  2011-11-23 19:29:24:480 120 9 d 4 to THE # scheduled install date and time: every day at 03:00
  minor updates to the # Auto - install 2011 - 11 - 23 19:29:24:480 120-9 d 4 - UA: Yes (user preference)
  2011-11-23 19:29:24:480 120 9 d 4 to THE # will interact with non-admins (Non-admins are high (user preference))
  2011 11-23 19:29:24:480 120 9 d 4 to # displays software notifications recommended (user preference)
  2011-11-23 19:29:24:480 120 9 d 4 to THE adjustment to THE expected install time 24 / 11 / 2011 02:00
  2011-11-23 19:29:24:995 120 9 d 4 report * report: initialization of static data to report *.
  2011-11-23 19:29:24:995 120 9 d 4 report * OS Version = 6.1.7601.1.0.66304
  2011-11-23 19:29:24:995 120 9 d 4 report * OS Product Type = 0 x 00000003
  2011-11-23 19:29:25:011 120 9 d 4 report * computer brand = system manufacturer
  2011-11-23 19:29:25:011 120 9 d 4 report * computer model = system Product Name
  2011-11-23 19:29:25:011 120 9 d 4 report * Bios revision = 1005
  2011-11-23 19:29:25:011 120 9 d 4 report * name of Bios = BIOS Date: 05/02/10 19:13:52 Ver: 08.00.10
  2011-11-23 19:29:25:011 120 9 d 4 report * Bios Version Date = 2011-06-27 T 00: 00:00
  2011-11-23 19:29:25:011 120 9 d 4 report * locale ID = 1031
  2011-11-23 19:29:25:026 120 9 d 4 wrote to success event to THE health state: 0
  2011-11-23 19:29:25:042 120 9 d 4 updates to THE initializing featured
  2011-11-23 19:29:25:042 120 9 d 4 to THE Found set 0 cached updates featured
  2011-11-23 19:29:25:042 120 9 d 4 wrote to success event to THE health state: 0
  2011-11-23 19:29:25:042 120 9 d 4 wrote to success event to THE health state: 0
  2011-11-23 19:29:25:042 120 9 d 4 to THE delayed finish initialization
  2011-11-23 19:29:30:049 120 684 CWERReporter finish event management report. (00000000)

  2011-11-23 19:45:56:873 a 120 11, 4 detection of THE shutter to THE via API DetectNow
  2011-11-23 19:45:56:873 a 120 11, 4 trigger detection online (interactive)
  2011-11-23 19:45:56:873 120 9 d 4 to THE #.
  2011-11-23 19:45:56:873 120 9 d 4 to THE # START # to THE: research updates
  2011-11-23 19:45:56:873 120 9 d 4 to THE #.
  2011-11-23 19:45:56:876 120 9 d 4 to THE<## submitted="" ##="" au:="" search="" for="" updates="" [callid="">
  2011-11-23 19:45:56:876 120 1340 Agent *.
  2011-11-23 19:45:56:876 120 1340 Agent * START * Agent: finding updates [CallerId = AutomaticUpdates]
  2011-11-23 19:45:56:876 120 1340 Agent *.
  2011-11-23 120 1340 Agent 19:45:56:876 * Online = Yes; Ignore download priority = No
  2011-11-23 19:45:56:876 120 1340 Agent * criteria = "IsInstalled = 0 and DeploymentAction = 'Installation' or IsPresent = 1 and DeploymentAction = 'Uninstall' or IsInstalled = 1 and 'Installation' and = 1 RebootRequired = DeploymentAction or IsInstalled = 0 and DeploymentAction = 'Uninstall' and RebootRequired = 1".
  2011-11-23 19:45:56:876 120 1340 Agent * ServiceID = {7971F918-A847-4430-9279-4A52D1EFE18D} third service
  2011-11-23 19:45:56:876 120 1340 Agent * scope of search = {Machine}
  2011-11-23 19:45:56:881 120 1340 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
  2011-11-23 19:45:56:906 120 1340 Misc Microsoft signed: Yes
  2011-11-23 19:45:56:948 120 1340 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
  2011-11-23 19:45:56:953 120 1340 Misc Microsoft signed: Yes
  2011-11-23 19:45:56:958 120 1340 Agent looking for updates auth cab for 7971f918-a847-4430-9279-4a52d1efe18d to http://download.windowsupdate.com/v9/microsoftupdate/redir/muauth.cab service
  2011-11-23 19:45:56:958 120 1340 Misc validation signature for C:\Windows\SoftwareDistribution\AuthCabs\authcab.cab:
  2011-11-23 19:45:56:963 120 1340 Misc Microsoft signed: Yes
  2011-11-23 19:45:56:991 120 1340 Misc validation signature for C:\Windows\SoftwareDistribution\AuthCabs\authcab.cab:
  2011-11-23 19:45:56:996 120 1340 Misc Microsoft signed: Yes
  2011-11-23 19:45:56:996 120 1340 Setup looking for agent SelfUpdate
  2011-11-23 19:45:56:996 120 version Setup Client 1340: Core: 7.5.7601.17514 to the: 7.5.7601.17514
  2011-11-23 19:45:56:998 120 1340 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
  2011-11-23 19:45:57:001 120 1340 Misc Microsoft signed: Yes
  2011-11-23 19:45:57:021 120 1340 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
  2011-11-23 19:45:57:026 120 1340 Misc Microsoft signed: Yes
  2011-11-23 19:45:57:028 120 1340 Misc validation signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
  2011-11-23 19:45:57:031 120 1340 Misc Microsoft signed: Yes
  2011-11-23 19:45:57:298 120 1340 Misc validation signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
  2011-11-23 19:45:57:303 120 1340 Misc Microsoft signed: Yes
  2011-11-23 19:45:57:303 120 1340 installation caution: SelfUpdate check failed download package information, error = 0x80070005
  2011-11-23 19:45:57:303 120 1340 Setup FATAL: SelfUpdate check failed, err = 0 x 80070005
  2011-11-23 19:45:57:303 120 1340 Agent * WARNING: jump scan, self-update check returned 0x80070005
  2011-11-23 19:45:57:323 120 1340 Agent * WARNING: exit code = 0x80070005
  2011-11-23 19:45:57:323 120 1340 Agent *.
  2011-11-23 19:45:57:326 120 1340 Agent * END * Agent: finding updates [CallerId = AutomaticUpdates]
  2011-11-23 19:45:57:326 120 1340 Agent *.
  2011-11-23 19:45:57:326 120 1340 Agent WARNING: customer WU didn't search for the update with error 0 x 80070005
  2011-11-23 19:45:57:326 120 d1c to THE > # RETURN # to THE: research updates [CallId = {97E55CEA-3A4F-4377-BC4E-BF133B65D5FD}]
  2011-11-23 19:45:57:326 120 d1c to # WARNING: reminder of search failed, result = 0x80070005
  2011-11-23 19:45:57:326 120 d1c to # WARNING: could not find the updates with the error code 80070005
  2011-11-23 19:45:57:326 120 d1c to THE #.
  2011-11-23 19:45:57:326 120 d1c to # END # in THE: research updates [CallId = {97E55CEA-3A4F-4377-BC4E-BF133B65D5FD}]
  2011-11-23 19:45:57:326 120 d1c to THE #.
  2011-11-23 19:45:57:326 120 at THE d1c successfully wrote event to THE health state: 0
  2011-11-23 19:45:57:326 120 d1c to THE timeout parameter next detection at 2011-11-23 23:45:57
  2011-11-23 19:45:57:326 120 d1c phase of installation to THE adjustment to THE planned 24 / 11 / 2011 02:00
  2011-11-23 19:45:57:326 120 at THE d1c successfully wrote event to THE health state: 0
  2011-11-23 19:45:57:326 120 at THE d1c successfully wrote event to THE health state: 0
  2011-11-23 19:46:02:303 120 1340 report REPORT EVENT: 2011-11-23 19:45:57:303 + 0100 1 148 101 {3FB4E0D0-2DFD-403C-B4D2-20AAC951DEA9} {D67661EB-2423-451D-BF5D-13199E37DF28} 1 80070005 SelfUpdate software failure synchronization Client Windows Update not found with error 0x80070005.
  2011-11-23 19:46:02:316 120 1340 report CWERReporter::HandleEvents - WER report upload completed with status 0 x 8
  2011-11-23 19:46:02:316 120 1340 WER sent report: 7.5.7601.17514 0x80070005 D67661EB-2423-451D-BF5D-13199E37DF28 Scan 101 unmanaged
  2011-11-23 19:46:02:316 120 CWERReporter 1340 finish event management report. (00000000)

  Given that is not able to find something and there are indications of parcel damaged, you can try an in Place Upgrade.

• Pavilion Media Center does not restart after the full system recovery. get the error code 0 x 4001100200001005

  Pavilion Media Center does not restart after the full system recovery. created recovery disks when purchased new. get the error code 0 x 4001100200001005

  Original title: recovery problem

  Hello

  According to the HP Support Forums, this error may be to do with the hard or for other reasons.

  You never have it replaced with a no HP bought in car?

  Read these threads HP on your error code:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/recovery-disk-error-0x400110020000-1005/TD-p/22936

  http://h30434.www3.HP.com/T5/desktop-recovery-reply-only/trying-to-recover-an-old-PC-error-code/TD-p/964509

  If the original hard drive, press F11 at startup to start the process of recovery partition HP, did you recovery disks of.

  See you soon...