Error: 1053

Similar Questions

• How to fix: Error 1053 of the print spooler

  Are you an error when you try to restart the print spooler?  Do you have your printer spooler error and now, do not restart?

  You saw "error 1053: the service did not demand launch or control in a timely.?

  There is a page of Microsoft support with information about this error, which can be found here.

  According to Microsoft:

  • Question: The ServiceBase class calls the OnStop method directly from the Service command handler that is defined in the ScDispatcherLoop of the Advapi32.dll file. After 30 seconds, if the ScDispatcherLoop thread is not ready to receive a new order of service from service control manager, Windows brand services controller out service as 'time '. Therefore, you receive this error message.
  • Resolution: to resolve this problem, obtain the latest service pack for Microsoft .NET Framework.

  This resolution works for some, and allows the service to return to the correct functionality.  However, I want to provide workaround incase this option does not work for some.

  • Open the run command by selecting it from the start menu or by pressing the Windows key (to the left of the alt) + R
  • Type services.msc and press enter
  • Scroll down and double click on print spooler
  • Select the tab log
  • Uncheck the Allow service to interact with desktop
  • Click apply
  • Select the general tab for the print spooler, and then select start

  I have the confirmation that this workaround works for some users.  The link below will take you to a thread where this information has resolved this error a user in these forums:

  1053 error print spooler does not start thread

  Here is the video where the workaround steps, listed above, were found.  The video also gives a graphical representation of these steps for those who prefer the Visual instructions.

  I hope this helps users with error 1053 of print spooler.

• Error 1053 of the print spooler for HP Officejet 6500 a Plus All in One printer

  I get this error every time I try to install this printer. When I try to start the spooler in Services file, this error pops up. I ran a diagnostic and found that there may be errors of registry key in some files, but I don't kn Ow how to get rid of them. I tried every way start the print spooler, but he won't let me. Other diagnostic tools do not work because I can't even install the printer of dam. Help!

  The print spooler is a Microsoft services so that they would be the best people to talk to.  Most likely, the registry keys for the print spooler has not installed right.  My advice would be to format and reinstall the OS, but you can see what Microsoft has to say before doing this.  They may know a solution for this specific error.  Here is a link to a discussion I found on Microsoft Community on this issue.  I hope this helps.

  Print spooler starts windows 7 error 1053

• On a windows 2003 R2 SP2, gives error 1053 SNMP service startup

  On a windows 2003 R2 SP2, start the service SNMP gives error 1053 (below)

  

  In the event log are event ID: 7000 & 7009 back (below)

  

  

  Already tried: https://support.microsoft.com/en-us/kb/886695 (check the "allow service to interact with desktop").

  I have also run the Windows updates for all high priority updates, replaced the files %windir%\system32\snmp*.* with those of another R2 SP2 server that is not the problem (after rename the original to the *.old files & copy the same files in the folder DLLcache so SFC would stop interfering ;)) and checked for other errors that may show a reason for this - the only thing that I can connect to it) , it is that services IISAdmin & GoogleUpdate (gupdate & gupdatem) having the same problem, but unrelated to seams...

  TNX in advance for any response.

  Kobi

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• I have error #1053 windows could not start the printer spooler. Help

  Windows could not start the printer spooler. I received the error #1053.
  whatever it is sent to the printer never finished loading and crashes to the top
  my computer, so I have to re - start.

  This forum is for posting comments on the web site of Microsoft Answers, is not for technical questions.  Ask your questions to http://answers.microsoft.com/en-us/windows/forum/hardware, making sure that you specify your Windows version in the drop-down lists at the top.

• Error 1053 after windows xp update

  I'm on Acer Aspire One and have Windows Xp installed. I've updated windows several times, no problem.

  Last time I updated my windows (CA. December 15, 2009), I had to stop at 70% of the update of 100%, the battery of my laptop because when down and he put into hibernation and I stop.

  And when I restarted windows, that's what happened.

  1 start menu turns to classic
  2. I have no network available
  3 no audio device
  4. no automatic update

  When I tried to start these services run: services.msc, I got this message:

  Error 1053:... you know what's next.

  What is the problem, I even can't continue to update my windows (-30% left) because I was unable to start the automatic updates, or network connections.

  I tried to reinstall .NET framework 2.0 service pack 2 x 86 (netfx20sp2_x86) that I downloaded from microsoft download and also an update for it (kb974417-ndp20sp2 - x 86), he finished completely, but nothing happened when I rebooted.

  What could I do to fix this and get my last windows xp?

  Hi mr_adi,

  Welcome to the Microsoft Answers site!

  This error message does not indicate that an error has occurred in the Services snap-in. This simply means that the Services snap-in
  has expired. The process of the service will continue to operate until the operation is complete.

  Refer to this article:

  http://support.Microsoft.com/kb/307806

  Also, I suggest you uninstall and reinstall .net Framework. Uninstall the update and try installing the update again.

  Download link for X 86:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=0856EACB-4362-4B0D-8EDD-AAB15C5E04F5&displaylang=en

  If the problem persists, then do a system restore to restore your computer to an earlier point in time.

  Refer to this article for more information:

  http://support.Microsoft.com/kb/306084

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Failed to start the Windows Audio Service on Local computer. Error 1053.

  Hello! Last week, I lost all sound elements. When you click the sound icon, I got the error 'there is no available active mixer device. To install mixer devices, go to control panel, click Printers and other devices, and then click Add Hardware . "I'm going through the Add Hardware Wizard, click on that I already added the material and select SigmaTel High Definition Audio Codec. It says "the device is functioning properly." According to Device Manager, the device is functioning properly. When I go to start, run, services.msc and try to start Windows Audio, I get "unable to start the Windows Audio service on Local computer. Error 1053: the service did not demand launch or control in a timely . »

  Can anyone advise me on what to do?

  Hello

  About the message you received, it is likely that your sound driver may be damaged. In this case, try to reinstall the driver.

  You can also go to the website of your computer manufacturer to get the driver. They should have ALL the drivers for your computer model. :-)

• Wireless not working and from "diagnostic policy service" gives error 1053

  Hello

  I have a problem with the connection to wireless internet. The router is working because I can get online to other computer and iphone. The question seems to be from my laptop.

  Laptop: Sony Vaio VPCEA
  Windows 7 Home Premium

  I was able to connect to the wireless using this laptop last night, but today in some sort it has stopped working. When I try to connect it says "restricted access". I have tried rebooting, removing the memory and of course Google wireless network, but nothing seems to work.

  When I tried to solve the problem, it says "diagnostic policy service does not work. So I went into Services and tried to turn it on (START) "Political diagnosis Service" but it gives me "error 1053: the service has failed to demand launch or control in a timely. I read online to install .net Framework 1.1 service Pack1 to get rid of this problem. But which is not supported by Windows 7, the more I installed 4.0 Framework, which should have taken care of this problem.

  Another suggestion is to disable the firewall and I noticed that my firewall is already turned off and I can't turn it on. I had the external anti-virus software, which I removed for this problem, but nothing works! When I tried to turn on the Firewall Services' Windows I get an error 1068: the dependency service or group could start. Dependence are: Base filtering engine and Windows Firewall authorization driver. Who do not start.

  I tried fixing the registry using the Wise Registry Cleaner. Clean something, she has not fixed any problems yet.

  Help, please. I'M FRUSTRATED!

  Thanks in advance!

  Hi bberringer,

  The original message has been able to resolve error 1053 by reinstalling Windows. If you have not reinstalled Windows, I would say the following steps before you spend money on the circuit board. If you already try reinstall Windows and always have failed, I suggest the internet search (or the site of the manufacturer if your computer is a Dell, Acer, HP, etc.) for the same or a Platinum compatible as prices can vary according to your computer brand and model.

• Error 1053 while trying to start the police Cache Service Windows.

  original title: Windows Font Cache Service does not start

  When I turn on my computer Service of police Cache Windwos is stuck on startup so that it uses 25% of my cycles constently cpu. If I end the svchost.exe behind it then try and start it myself that I get error 1053 so vertually I have no control over the service at all I can not try to stop it restart, pause, or resume. I can disable so it does not even start when I turn on my computer and it helps, but the service should start and stop easily.

  I changed it to automatic (delayed start) and it started right at the top!

• Apple Mobile Device Error 1053

  Running Windows Home Premiun 7, 64 bit. I tried to upgrade to iTunes 12.1.1 and I got the error 1053 Apple Mobile Device. After that hit "Ignore" and it appeared that iTunes loaded, I went to open iTunes and got the 7 error (error Windows 193) and now cannot open iTunes.

  After go to Microsoft Web sites and from Apple and try to everything written about the problem (and a ton of hours trying to solve this problem), I'm here looking for wise advice. I completely uninstalled all Apple programs, rebooted and reinstalled iTunes three times with the same results.

  Looks like a Microsoft-Apple compatibility program, but I'm just a common Joe, not a computer expert.

  Not sure, but see http://support.apple.com/kb/DL1784?viewlocale=en_US&locale=en_US after reading this (unfortunately long) post http://answers.microsoft.com/en-us/windows/forum/windows_7-system/error-7-windows-error-193-when-installing-itunes/c6521f87-ee46-4e80-ae61-e940ba03721a?page=1 and see the response of "Hmturner91" on page 2.

  If that seems a similar problem, it may be worth it.

• HPWSProAdapter: Error 1053

  Hello

  Today, I noticed that on my server Web Jetadmin (v10.3 SR6, Windows 2008), the HPWSProAdapter service is not working. I tried to start it and got the following error message:

  Error 1053: The service did not demand launch or control in a timely

  After a few hours reseaching I can't find what is causeing this problem. There have been no major changes lately that I now have some. I tried to uninstall all updates of windows for the last month and a half, but that has not changed anything.

  I also tried to set the service account to use a service network instead of the default "Network Service" account

  Ideas for what could cause this problem and what can I do about it?

  I apprecaite the help!

  Reese

  To get your question more exposure I suggest you post in the trade forums since it is a commercial product. You can do this to commercial Forums.

  I hope this helps!

• Windows could not start the service Windows search on the computer Local (Error 1053)

  Windows Search does not work on the start menu, nor IE8 remembers the URL history more.

  I tried the procedure described in this post (does not work): http://social.answers.microsoft.com/Forums/en-US/w7files/thread/8d68d244-afca-4006-a6eb-57d4dd9d58df

  I ran a scan sfc, who has not returned this any integrity issues have been detected.  I also tried to disable the Windows search feature to "Turn Windows features on or off", rebooted and tried reactivation, without success.

  I tried to create a new profile, but the same problem occurred.  I discovered that WSearch service does not work.  When I try to enable it, I get the following error:

  ---------------------------
  Services
  ---------------------------
  Windows could not start the Windows Search service on Local computer.

  Error 1053: The service did not demand launch or control in a timely

  I did some searching on the forum, but I was unable to find a solution to this problem.  Any help would be greatly appreciated.

  Yep, http://www41.zippyshare.com/v/30503880/file.html

  Unzip it, and then apply this Difficulty REG. Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• VerifyError: Error #1053: Illegal override of requestSoftKeyboard in qnx.ui.text.TextInput

  After the Tablet SDK 1.1 and Flash Builder 4.5.1 upgrade my application work is no longer in the Simulator or on the device (upgraded to OS ver 1.0.6)

  The following error is thrown at the launch of the app: "VerifyError: Error #1053: Illegal override of requestSoftKeyboard in qnx.ui.text.TextInput.

  All this error

  Yes, it was an older project which has been updated to use the new SDK. I ended up remove and recreate the project... that solved the problem.

• I'm having problems with error 1053 (print spooler) message in Windows 7 and no solutions seem to work. There the up todate solutions/suggestions out there? Dave

  I keep losing the connection to my printer.

  I get the need to resume the spooler error message. Then, I get error 1053.

  I tried various fixes suggested, but nothing works.

  Any help out there!

  Dave.

  See http://support.microsoft.com/kb/2793718/en-us

  Use the 'light ' first FixIt mode.

  If the lighting mode does not work, use the full mode - but you will then need to reinstall your printer:

  The mode light will change the spooler that should not require the user to make changes. The full mode will restore the spooler to print to the default settings and require a reinstall of drivers for printing and printers.  All applications must be stopped before running the difficulty it Solution.

• Printer spooler will not start error 1053

  Hello

  I got a Lexmark X 4550 printer installed on my Windows 7 x 64 inspiron for a few months now. Steeplechase the printer would not print that's never happened before. When I went to devices it says there was a problem with the printer and she needed troubleshooting. The store could not find a solution. I found a few fixes suggested online and you have tried without success. However, I discover that the printer spooler has been arrested. When I tried to restart services it came with an error that says: -.

  Windows cannot start the service on the local computer printer spooler

  Error 1053: The service did not demand launch or timely control.

  I checked that it is configured to run automatically, and when I checked the dependencies that I discovered that the remote procedure call was arrested and the manual value. I have reset automatically and it started successfully. This did not however fix the printer spooler error.

  I uninstalled the lexmark software and tried to delete the printer driver - this has not helped either.

  I also tried the following: -.

  Open a command prompt window

  the control key;
  dependent on the spooler of sc config = RPCSS

  Restart the print spooler

  This did not help also.

  I tried the list in the folder of the coil of compensation, but there's nothing in it.

  I totally ideas, suggestions on how to fix this? I think that Windows had a fix for this problem on XP and Vista, but I can't find one for windows 7. Any help would be greatly appreciated.

  James (and all those who have contributed so far),

  I found this offer on the Microsoft Answers site forum.  It's by a guy named encro.

  Let me know if it works, I don't have access to a printer for the moment.  I'd be more interested in your results, whether it is successful or not.

  The solution: get the spooler to start!

  This seems to be a very common problem on Windows 7, caused by a recent update 'Important' within the late March/early April. I found the fix for this while working on a clients machine and noticed something abnormal in that the print spooler was not actually the print spooler it is why it wouldn't start. Now that our team have set about 20 machines using this process, I'm confident enough, that this is workaround until a future WSUS update corrects this correctly. It's still speculation at this point because log files have not really brought to this day a lot of troubleshooting help this and it can be not linked to a KB from Windows Update.

  I'm still trying to determine the real Windows Update update that caused the problem to inform Microsoft of bug but the problem goes something like this:

  Determine if this is the case on your computer.

  Verify the existence of spoolsv.exe.org and spoolsv.exe in %windir%\system32 (C:\Windows\System32)

  If both exist then it is likely the following problem.

  Compare the spoolsv.exe file size
  
  Sometimes the real spoolsv.exe is called spoolsv.exe.org [545KB] and instead of spoolsv.exe place will actually be a file 41KO posing as the print spooler. I guess the system saved the original spooler at a given time and accidentally replaced it with something else. Spoolsv.exe should be the file 545KO at this point.

  Correction of the problem

  Step 1: Spoolsv.exe and rename it spoolsv.bak

  Step 2: Spoolsv.exe.org and rename spoolsv.exe

  Rename spoolsv.exe.org here is a bit more tricky because it requires to change the property file from TrustedInstaller to the administrator group and giving the full group write permissions for the file. Without doubt, this has security implications, it is recommended to restore the permissions once the file is renamed.

  By changing the property of the file from TrustedInstaller to administrator then activation full of change to the administrator group, you can exchange files by the name change and correct this problem.

  I usually and rename spoolsv.exe spoolsv.bak and then rename spoolsv.exe.org to become the real spoolsv.exe.

  Step 3:

  Start the print spooler via Services (services.msc) or at the command prompt by using net start spooler.

  Moment<3 from="" the="" spooler="" and="" a="" major="" headache="" for="" many="" people="" finally="" fixed="">