Error 1068

Similar Questions

• I install the spilitter of bandwidth for isa server 2006 after the stoped.i of the microsoft firewall service cannot start this service and I take the error 1068-how do I do

  I install the spilitter of bandwidth for isa server 2006 after the stoped.i of the microsoft firewall service cannot start this service and I take the error 1068-how do I do?

  Hello

  Your question is beyond the scope of these forums.

  Please use the following links for that matter.

  Network Infrastructure servers Forum:
  http://social.technet.Microsoft.com/forums/EU/winserverNIS/threads

  Category of the Windows Server:
  http://social.technet.Microsoft.com/forums/EU/category/WindowsServer

  Concerning

• How to remove the error 1068, when the attempt to start BITS

  When I tried to update windows, an error has been reported. the help instructions made me open the services section and when I tried to start BITS, another error 1068 showed... How counter this error and start the pieces? pls help.

  emeraldiswhite,
  In addition you respond with the requested information, browse the following article and let us know the results.
  http://support.Microsoft.com/kb/910337

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error 1068: Task Scheduler cannot start, impossible defragmentation

  I tried to defrag my sister's computer and ran into a problem.  Defragmentation wouldn't because Task Scheduler would not start.  Long story short: operating system Windows 7.  My attempts to solve the problem, there are messages that I continued to receive:

  "Windows would not start the Scheduler Service on the Local computer.

  and

  "ERROR 1068: the dependency service or group could start."

  Please, I need help.  Any ideas?  Do you need more information?

  Thank you in advance,

  Laura

  Hi Laura,

  Open windows control panel, open administrative tools, and then open Services.  First check both of these services.

  Remote procedure (RPC) call  This service should show started and startup type must be automatic.

  Windows event log                    This service should show started and startup type must be automatic.

  If you need to change the settings of the two services above, right-click on the service and select Properties.  Select Automatic from the drop-down list and click on apply.  Once finished, click on the Start button to see if the service starts successfully.

  
  

  Task Scheduler                            This service should show started and startup type must be automatic.

  If you have made changes, see if the disk defragmentation utility will now work.

  Let me know if this does not help the issue.

  Kind regards

  DP - K

• Print Spooler error 1068: the dependency service or group could start. __

  I tried - unsuccessfully - restart the print spooler on a box of XP with SP3.  I read the previous posts for this error and this box refuses to restart the service.

  Is there an easy way to fix this without reverting to a system reset?  Can I run a repair?  If so, it will fix the problem?  I tried to run a restore of the system to a previous date and who could not do anything for me either.

  When you attempt to start the Print Spooler Service, error 1068 means "the dependency service does not exist. the dependency service or group was able to start. »

  Depending on your environment and your type of printer installed, your Print Spooler Service will have other dependent services that must run before the Print Spooler Service starts.  If the dependent services do not work, you will see an error 1068 or a similar message on the dependent services when you try to start the Print Spooler Service.

  Some Lexmark printers add their own XP services and start the Print Spooler Service, lists them as dependencies and that is why these Lexmark Services must run before the print service spooler will begin.  It may be listed as the LexBce Server.

  You now or have you ever have all installed Lexmark printers?  If Yes, do you still use Lexmark printers?

  Depending on your printing environment, if you use another type of printer, you can have other Service listed tab in the Print Spooler Service dependencies.

  Use the Applet of Services XP to check the dependencies of print spooler and options.

  Click Start, run and enter in the box:

  services.msc

  Click OK to open the Services Applet.

  Locate the Print Spooler Service, right-click, choose Properties, and then look at the Dependencies tab.  Services listed there must run before the Print Spooler Service starts.  If they don't, you'll get an error 1068 or a similar message on the dependent services when you try to start the Print Spooler Service.

  You should always see the service remote procedure call (RPC) and maybe a few others depending on the type of printer that you have installed (Lexmark printers can add some dependency Services to your configuration of XP).  All dependent services must run before the Print Spooler Service starts.

  Dependent Services may vary according to the type of printer that you have installed.

  The RPC service is also required for many other things to work properly and is usually still running and the autostart value.

  If the RPC Service does not work and does not start automatically, you can have other problems, but start with the easy stuff first.

  Of the Services Applet, find the service remote procedure call (RPC) and if it does not, right-click and start it and set it to automatic.

  Then find and all the other print spooler dependency services listed in the Print Spooler Service Dependencies tab.  They will be lance automatically the next time you reboot your system (if that is your desire), set the startup type for these Services to automatic.

  When everything works as you want, restart and check your Services again to be sure that they start correctly and solve any addition
  questions.

  If the remote procedure call (RPC) service is not listed as a dependency for your Print Spooler Service, you must inform XP that the print spooler service depends on the RPC service.

  Click Start, run, and in the box type (including important space after the "equal" sign):

  dependent on the spooler of sc config = RPCSS

  Click OK to assign the RPC service for the print spooler service, and then make sure that the RPC Service is running and start your Print Spooler Service.

  If you still can not understand it, react with the items that you see the tab of the Print Spooler Service dependencies.

  Don't forget to restart and check that everything works correctly after each adjustment.

  Please note that using the above command will effectively remove all the current (and perhaps old) Print Spooler dependency assigned for the Print Spooler Service and assign it only dependent on the RPC Service.  It would be 'normal '.

  The dependence of CPP Service would be typical of most facilities, or after you have uninstalled all the time some printers (Lexmark), but your printer may have a few other dependencies.  If it still does not respond, we'll fix it!

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• print spooler error 1068

  Click Start, run, and in the box type (including important space after the "equal" sign):

  dependent on the spooler of sc config = RPCSS

  When I do the above step, he said.  access denied

  My addictions are HTTP, LexBce server, Remote Procedure Call (rpc)

  RPC is running and set to automatic

  When you attempt to start the print spooler, I received the error 1068. I tried the listed in various forums, I've watched a lot of things. Print spooler keeps giving me the error 1068.

  When I would try this particular stage:

  Click Start, run and type the following text:

  CMD /K SC CONFIG SPOOLER DEPEND = RPCSS

  By doing the above step, I would get an answer in the denial of access cmd...

  In all forums, I looked, I couldn't see the suggestion that David Vinod had. This is what worked for me.

  Click Start, run and type Regedit.exe

  Navigate to the following branch

  HKEY_LOCAL_MACHINE-SYSTEM-CurrentControlSet-Services-spooler

  In the right pane, double-click the DependOnService value

  Delete existing data and then type RPCSS

  Close Regedit.exe.

  I need to remove a dependency that I had from a previous printer that is has been uninstalled and didn't know how to do. Thank you very much for the help! My problem is solved!

  
  

• Windows XP search error 1068

  I can't reboot my search function of Windows on Windows XP SP3.  I get the error 1068.  I went in administrative tools to try to start it and get the message "the dependency service or group could start." Can someone help me?

  Hello

  I will definitely help you with this.

  I suggest you to designate suggestions issued by Joel S on May 17, 2012 and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-files/Windows-search-not-working-on-Windows-XP/09f0dab5-994F-4f94-8dd6-10408bb333c7?msgId=5d6b3221-565c-41CF-8257-c9d546f020b0

  If the problem persists, or you have any other questions, do not hesitate to let us know. It is our pleasure to be of service.

  Thank you.

• Printer Spooler service will not restart error 1068

  I have XP and I cannot get my printer spooler service to restart, get error 1068, is there something I can do

  I have XP and I cannot get my printer spooler service to restart, get error 1068, is there something I can do

  This error is probably due to the fact that you had (have) a Lexmark (or Dell Lexmark brand) printer installed.  Some Lexmark printers install a service and make the print service spooler depend on the Lexmark service.  So, if something happens to the Lexmark service, the print spooler cannot start.

  The first thing to do is to ensure that the print spooler dependencies are correct.  Open a command prompt window (start > run > cmd > OK) and type the following line and press ENTER.  Note that there is no space before the = but there is a space after it.

  dependent on the spooler of sc config = RPCSS

  Now clean the printing system: However before cleaning things up, on general principles, you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  Cleaning of printers

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.  Do not omit step 4.

• -Error 1068: when I try to start the "Windows"(Windows XP Pro). Search Service ".

  I get an error 1068 and the service cannot be started. My PC is slow to find things and start. How to go beyond this error and get my indexing job?

  I checked and installed all windows updates for all my software from microsoft.

  Jim

  {7D096C5F-AC08-4F1F-BEB7-5C22C517CE39} = Manager of Windows search.

  It is quite all right, but you have a virus / malware infestation the or about July 7, 2011. Malware will address management tools such as event viewer and the Task Manager.

  You might have been able to resolve the problem by using the system restore, but very probably will have passed too much time for you to have a restore point before the alleged infestation. What you have with a Windows XP CD? I suspect that you need to do a repair installation and for this you need an original CD. If it's a branded computer which includes most laptops, this will be a restore to factory settings after you back up your data files.

• Windows xp: services do not start the access denied error 5 or error 1068

  Original title: windows xp: service does not start

  win xp: none of my important services like firewall, DHCP or the server does not start.  Everyone says error 5 access denied or error 1068 could not start dependencies... Please help

  Hello

  1. do you have security software installed on the computer?

  Try the methods provided below and check if the problem persists.

  Method 1:

  I suggest that you disable the security software and then try to start the service and check if the problem persists.

  Note:

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:

  You will also need to start long-term services and check if that helps.

  To view service dependencies, click the link below.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/srvdep_view_service_dependencies.mspx?mfr=true

  Method 3:

  Check if the computer isn't on selective startup.

  How to configure Windows to use a Normal startup state

  Configure Windows XP to start normally.

  (a) click Startand then click run.

  (b) type msconfigand click OK.
  The System Configuration utility dialog box appears.

  (c) click on the general tab, click Normal Startup - load all device drivers and services, and then click OK.

  (d) when you are prompted, click restart to restart the computer.

   

• Unable to start Windows Media pPlayer 11 to share media: Error 1068 dependency service or group could not start

  1068

  Cannot start media player 11 to share media. Error 1068: the dependency service or group could not start

  Hello! I found the solution to my problem here:

  http://wiki.answers.com/Q/Why_do_I_get_an_Error_1068_when_I_try_to_share_my_media_in_WMP11_in_WXP_pro_sp2_start_service_in_services

  It is possible that it would be more useful for someone.

• Security/firewall services not started: I think error 1068 - dependent on a device on something?

  I have two identical computers running on broadband, a center of safety works w/firwal, malware, etc. everything works; the other said the Security Service was stopped or not started; application if you want to start (yes/no), click Yes, and then msg cannot start dependent on certain devices or something; Error 1068 I think.  so, can't turn firewall (same MSG), change settings or anything like that.  think that someone may have tried to do something and it didn't work.  I am admin with several users limited on the pc of the community.  just installed Micro Security Essentials (on both PCs). only has this problem-practically the same thing in software & hardware.

  any help?

  There is a Security Center service in Windows XP, there is no "security services".
  Microsoft Security Essentials (MSE) is not disable the native XP firewall and it is not a firewall.

  Most often the native Windows, XP and Security Center Firewall disabling is caused by the incorrect removal of previously installed antivirus/security suite or it peut be hidden malware resident.

  Article I previously linked you tells you how associate material current profile to all services that are running XP.
  Service starts not and displays "Error 1058"

  What is the specific message you see when you try to start the Security Center service?

  Strongly suggest that you first run this tool detection and removal of Kaspersky to see if there is malware hidden on the affected system-
  How to remove malware belonging to the family Rootkit.Win32.TDSS (aka Tidserv, TDSServ, Alureon)

  
  That security/antivirus suite or 3rd party firewall has already been installed on the affected system?

  You can try to reactivate the service by running a file (wscvs.reg) here, which found also works with Windows XP SP 3 - Security Center
  How to restore service 'Security Center' missing in Windows XP SP2?

  BUT, if there is the hidden malware resident or the previously installed AV or 3rd party was not successfully deleted, then the issue will happen again.

  Expert MowGreen Windows IT Pro - consumer safety

• "Windows failed to start the service on Local computer print spooler. Error 1068: the dependency service or group could start. »

  I fiddle with my startup programs and now I have this error message: "Windows could not start service on Local computer print spooler.  Error 1068: the dependency service or group could start. "There is no printer listed everywhere and nothing works.

  Hi Jkoryzna,

  Thank you for choosing the Microsoft Answers forum.

  To solve the problem, fix the dependency for the spooler service information.

  Click Start, run and type the following text:

  CMD /K SC CONFIG SPOOLER DEPEND = RPCSS

  Alternatively, to achieve this by using the Registry Editor:

  Click Start, run and type Regedit.exe

  Navigate to the following branch

  HKEY_LOCAL_MACHINE-SYSTEM-CurrentControlSet-Services-spooler

  In the right pane, double-click the DependOnService value

  Delete existing data and then type RPCSS

  Close Regedit.exe.

  
  REGISTRY WARNING

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  Navigate through the steps mentioned in the article below.
  Solve printing problems by resetting the print spooler.

  http://support.Microsoft.com/kb/2000007

  Let us know if this helps

  Concerning
  Anthony.

• Vista error 1068

  Deleted the 2 viruses and many adware. Now I can't upgrade windows or start BITS or Firewall - error 1068.  Have you tried many fixes without success, even tried to run FIXIT.  sfc/scannow also does not work.

  Tried running svc - no luck.  Windows Genuine advantage fails. [SOURCE]

  How did you determine that the computer is infected is no longer?

  KB2957689, KB2957503, KB2957509, KB2939576, KB2957189, and/or KB2926765 listed in installed updates (not update history)?

  How about KB2893294, KB2892075, KB2887069 or KB971029?

• Cannot start the workstation service, does not work error 1068 (Vista SP2)

  Hello
  It's about a year I can't start the workstation on my Windows Vista SP2 (HP Pavilion dv9000) service.
  It fails on: "Error 1068" "the dependency service or group could start.
  CBS.log sfc/scannow shows messages like:
  -Repair corrupted file [ml:520 {260}, l:62 {31}] '------? \C:\Windows\System32\Drivers"\[l:24{12}]"Mrxsmb20.sys ".
  -Repair corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:24{12}]"ntkrnlpa.exe ".
  -Repair corrupted file [ml:520 {260}, l:62 {31}] '------? \C:\Windows\System32\Drivers"\[l:20{10}]"Mrxsmb.sys ".
  -Repair corrupted file [ml:520 {260}, l:62 {31}] '------? \C:\Windows\System32\Drivers"\[l:24{12}]"mrxsmb10.sys ".
  A problem with the system audit reports:
  -on scname exitcode: 1068: LanmanWorkstation
  I have spent hours of troubleshooting and suspect I would need to replace the mrxsmb files but I'm not sure.
  I lived with the problem for months, but now he keeps me to install updates of Adobe software for Photoshop that requires the workstation service is running. I can't access an another XP workstation over the network.
  FYI: my mrxsmbxxx.sys files are all 23-02-2010.
  Windows updates are up-to-date, except one, the security update Windows Vista KB981852 which never succeeded to to install on my pc.
  Your suggestions are welcome.
  Thank you for your help.
  Eric

  I finally found a solution to this problem.
  I installed http://support.microsoft.com/kb/2272153/ .
  I hope it's useful to others.
  Eric