Error 16 initially upwards!

Similar Questions

• STOP: c000021a {fatal system error} the initial session process or system ended unexpectedly with status 0 x 000000001 (0xc0000034 0x0010038c). The system has been shut down

  I am trying to start my Dell Inspiron 1525, but get the following blue screen message "STOP: c000021a {fatal system error} the initial session of the process or system process ended unexpectedly with status 0 x 000000001 (0xc0000034 0x0010038c).» The system was stopped.

  I tried to boot mode without fail & startup repair but nothing helps, always the message, any help would be really appreciated as all my College work is stored on the laptop.
  What about Otto
  Windows vista Home basic

  Hello

  Check with Dell Support, their online documentation, diagnosis and ask in the forums about known issues.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  =========

  STOP: 0XC000021A

  Can be a difficult problem to solve, and you indeed need a technical help in a real store of the computer
  (not the leeks and the glances at a BestBuy or other BigBox stores) or system manufacturer support.

  Cause

  This error occurs when a subsystem of mode user, such as WinLogon or the Client Server Run-Time Subsystem (CSRSS), irremediably compromised and security can not be guaranteed. In response, the operating system goes into kernel mode. Microsoft Windows cannot run without WinLogon or CSRSS. Therefore, it is one of the rare cases where the failure of a user mode service can stop the system.

  Incompatible system files can also cause this error. This can happen if you restored your hard disk from a backup. Some backup programs may skip restoring system files which they determine are in use.

  
  Solve the problem

  Run the kernel debugger is not useful in this situation because the error occurred in a user mode process.

  Resolve an error in the user-mode device driver or system, third-party application service: Because the bug 0xC000021A control occurs in a user mode process, the most common culprits are third-party applications. If the error occurred after the installation of the new or updated device driver or service system, third-party applications, the new software should be removed or disabled. Contact the manufacturer of the software on a possible update.

  If the error occurs during the system startup, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the Windows Advanced Options menu that results, select the last known good Configuration option. This option is most effective when a pilot or a service is added at a time. If the error is not resolved, try to manually remove the offending software. If the system partition is formatted with the (FAT) file allocation table, use a MS-DOS boot disk to access the hard disk of the computer. If the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or remove the defective software. If the defective software is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file. If a room newly installed if material is suspected, remove it to see if that fixes the problem.

  Try running the emergency recovery disk (ERD) and allow the system to repair any errors that it detects.

  Solve a problem of file system do not match: If you have recently restored your hard disk from a backup, check if there is an updated version of the backup/restore program available from the manufacturer. Make sure that the latest Windows Service Pack is installed.

  STOP: 0XC000021A<-- read="" this="">
  * 1314.html http://www.faultwire.com/solutions-fatal_error/Status-System-Process-terminated-0xC000021A-

  -----------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  It's my generic bluescreen convenience store - you can try Mode safe mode as suggested in article
  above - repeatedly press F8 that you start. Disks of Vista are probably necessary - if you do not have to try
  repair, you can borrow a friends because they are not protected against copying. You can also buy the physical
  discs of the machine system good cheap that you already own windows (you will need to reinstall
  If necessary). You can also repair disks on another computer.

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• 0xC000021A {fatal system error}, the initial session process or the process of the complete system in unexpected ways with the blocking state 0 x 00000000 (0xc0000034 0x001008ac) the system has been halted

  Hello! I got this message from malware (I clicked to delete) in surfing on firefox and after awhile the explorer.exe closes with an error. I try to open the Task Manager and it says explore cannot be found!
  I rebooted and then I got this message "0xC000021A {fatal system error}, the initial session process or the process of the complete system in unexpected ways with the blocking state 0 x 00000000 (0xc0000034 0x001008ac) the system has been halted" and can't get anywhere.
  I can't even go in safe mode, the same error messages appears.

  Hi James,

  You could try the Startup Repair to see if it solves the problem:

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error 57 Initializing SQL * more

  I'm not able to start sql plus. It gives me the error message below. I didn't no problem when I worked a month back, but now when I start again, it gives me this error. In the meantime, the only change that I brought in my PC is installing Kaspersky Antivirus and do the analysis complete?
  
  Error 57 Initializing SQL * more
  Error while loading shared libraries of message
  
  Thank you

  Hick says:
  I'm not able to start sql plus. It gives me the error message below. I didn't no problem when I worked a month back, but now when I start again, it gives me this error. In the meantime, the only change that I brought in my PC is installing Kaspersky Antivirus and do the analysis complete?

  Error 57 Initializing SQL * more
  Error while loading shared libraries of message

  Thank you

  This error is triggered when you start at the beginning of the treatment for sqlplus and is, by nature, rather generic. Given that it is triggered during initialization, it is quite possible that not all libraries that may be required for additional details (such as localized error messages) are loaded.

  The only thing you mention has changed is installation of Kaspersky, which suggests that it blocks a library required to be loaded. This error can also be triggered in case of memory (which would also prevent the loading required libraries, etc.).

  Here is a simple test you can do by way of illustration (obviously not on a production system, etc.):

  $ cd \Oracle\11.2\database\BIN
  
  $ dir /s /b oraclient11.dll
  C:\Oracle\11.2\database\BIN\oraclient11.dll
  
  $ rem temporarily rename the Oracle RDBMS Client Library for testing
  $ ren oraclient11.dll oraclient11.dll.save
  
  $ rem this will raise error 57 since a required library could not be loaded during initialization
  $ sqlplus.exe /nolog
  Error 57 initializing SQL*Plus
  Error loading message shared library
  
  $ rem be sure to change back!
  $ ren oraclient11.dll.save oraclient11.dll
  

  Kind regards

  Mark

• ATG 10.0.3 error importing initial publication of data using CIM

  Hello
  I'll put up my environment using ATG 10.0.3 and WebLogic 10.3.5.0. While I'm configures the environment using CIM, at the stage when I import initial data for publication, the process stops after a while.
  I will very happy if someone could identify exactly the problem. Thank you!
  
  Error console CIM:
  -IMPORT OF DATA PUBLICATION-
  Enter [h] ELP, ain menu [m], [q] ITU to exit
  
  Import (1 of 16) /Publishing/base/install/epub-role-data.xml to /atg/
  userprofiling/InternalProfileRepository... Success
  
  /Publishing/base/install/EPUB-file-repository-data.XML import (2 of 16) to /.
  ATG/epub/file/PublishingFileRepository...
  -------DATA IMPORT FAILED-------------------------------------------------------
  
  Enter [h] ELP, ain menu [m], [q] ITU to exit
  Make sure that you have configured the connection details and have created the diagram.
  exec returned: 1
  
  
  Error CIM.log:
  Wed Oct 13 17:51:11 CEST 2011 info 1318521071310 atg.cim.task.ant.utility.AntLogger [exec] running kernel
  Wed Oct 13 17:51:11 info CEST 2011 1318521071311 atg.cim.task.ant.utility.AntLogger [exec]
  Info game Oct 13 17:51:11 CEST 2011 1318521071669 [exec] atg.cim.task.ant.utility.AntLogger * info Thu Oct 13 17:51:11 CEST 2011 1318521071667/atg/dynamo/service/Scheduler Planner closing.
  Wed Oct 13 17:51:11 info CEST 2011 1318521071670 [exec] atg.cim.task.ant.utility.AntLogger * info Wed Oct 13 17:51:11 CEST 2011 1318521071667/atg/dynamo/service/Scheduler Planner stopped.
  Wed Oct 13 17:51:13 info CEST 2011 1318521073670 atg.cim.task.ant.utility.AntLogger [exec] Exception in thread "main" java.lang.NoClassDefFoundError: javax/ejb/FinderException
  Wed Oct 13 17:51:13 info CEST 2011 1318521073670 [exec] atg.cim.task.ant.utility.AntLogger at java.lang.Class.forName0 (Native Method)
  Wed Oct 13 17:51:13 info CEST 2011 1318521073671 atg.cim.task.ant.utility.AntLogger [exec] to java.lang.Class.forName(Class.java:186)
  Wed Oct 13 17:51:13 info CEST 2011 1318521073671 atg.cim.task.ant.utility.AntLogger [exec] to atg.epub.project.CreateProject.performPreCheckinValidations(CreateProject.java:287)
  Wed Oct 13 17:51:13 info CEST 2011 1318521073671 atg.cim.task.ant.utility.AntLogger [exec] to atg.adapter.gsa.xml.TemplateParser.runParser(TemplateParser.java:5792)
  Wed Oct 13 17:51:13 info CEST 2011 1318521073671 atg.cim.task.ant.utility.AntLogger [exec] to atg.adapter.gsa.xml.TemplateParser.main(TemplateParser.java:5241)
  Wed Oct 13 17:51:13 info CEST 2011 1318521073672 atg.cim.task.ant.utility.AntLogger [exec] caused by: java.lang.ClassNotFoundException: javax.ejb.FinderException
  Wed Oct 13 17:51:13 info CEST 2011 1318521073672 atg.cim.task.ant.utility.AntLogger [exec] to java.net.URLClassLoader$ 1.run(URLClassLoader.java:217)
  Wed Oct 13 17:51:13 info CEST 2011 1318521073672 atg.cim.task.ant.utility.AntLogger [exec] at java.security.AccessController.doPrivileged (Native Method)
  Wed Oct 13 17:51:13 info CEST 2011 1318521073672 atg.cim.task.ant.utility.AntLogger [exec] to java.net.URLClassLoader.findClass(URLClassLoader.java:205)
  Wed Oct 13 17:51:13 info CEST 2011 1318521073673 atg.cim.task.ant.utility.AntLogger [exec] to java.lang.ClassLoader.loadClass(ClassLoader.java:321)
  Wed Oct 13 17:51:13 info CEST 2011 1318521073673 atg.cim.task.ant.utility.AntLogger [exec] to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:294)
  Wed Oct 13 17:51:13 info CEST 2011 1318521073673 atg.cim.task.ant.utility.AntLogger [exec] to java.lang.ClassLoader.loadClass(ClassLoader.java:266)
  Wed Oct 13 17:51:13 info CEST 2011 1318521073673 atg.cim.task.ant.utility.AntLogger [exec]... 5 more
  Wed Oct 13 17:51:13 info CEST 2011 1318521073674 atg.cim.task.ant.utility.AntLogger [exec] * debug Wed Oct 13 17:51:13 CEST 2011 1318521073669/atg/epub/version/VersionManagerService UN-initialize the VersionManagerService
  Wed Oct 13 17:52:11 info CEST 2011 1318521131058 atg.cim.task.ant.utility.AntLogger
  Wed Oct 13 17:52:11 info CEST 2011 1318521131058 atg.cim.task.ant.utility.AntLogger BUILD FAILED
  Wed Oct 13 17:52:11 info CEST 2011 1318521131058 atg.cim.task.ant.utility.AntLogger /mnt/opt/ATG/ATG10.0.3/CIM/plugins/Base/ant/cim-ant.xml:15: exec returned: 1
  Wed Oct 13 17:52:11 info CEST 2011 1318521131058 atg.cim.task.ant.utility.AntLogger
  Info game Oct 13 17:52:11 CEST 2011 1318521131058 atg.cim.task.ant.utility.AntLogger time Total: 1 minute 8 seconds
  Wed Oct 13 17:52:11 error it IS 2011 1318521131059 atg.cim.worker.dynamo.StartSqlRepositoryExecutorTask---/mnt/opt/ATG/ATG10.0.3/CIM/plugins/Base/ant/cim-ant.xml:15: exec returned: 1
  Wed Oct 13 17:52:11 error it IS 2011 1318521131059 atg.cim.worker.dynamo.StartSqlRepositoryExecutorTask to org.apache.tools.ant.taskdefs.ExecTask.runExecute(ExecTask.java:636)
  Wed Oct 13 17:52:11 error it IS 2011 1318521131059 atg.cim.worker.dynamo.StartSqlRepositoryExecutorTask to org.apache.tools.ant.taskdefs.ExecTask.runExec(ExecTask.java:662)
  Wed Oct 13 17:52:11 error it IS 2011 1318521131059 atg.cim.worker.dynamo.StartSqlRepositoryExecutorTask to org.apache.tools.ant.taskdefs.ExecTask.execute(ExecTask.java:487)
  Wed Oct 13 17:52:11 error it IS 2011 1318521131059 atg.cim.worker.dynamo.StartSqlRepositoryExecutorTask to org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)

  He searches the jar containing the missing class javax/ejb/FinderException.
  Please add one of the http://www.jarfinder.com/index.php/java/info/javax.ejb.FinderException Bowl in the class path, then run.

  And if you see all dependent jars missing please add them also.

  Peace
  Shaik

• [Emergency] sqlplus gets "error 5 Initializing SQL * more NLS initialization.

  Hi all.
  
  I published sqlplus but I got the following error.
  
  What could be the reasons for the following error?
  
  Thanks in advance.
  Best regards.
  
  --------------------------------------------------------------------
  [esumedi (ngwapt1): esumedi/SG /] sqlplus
  Error Initializing SQL 5 * more
  Error of initialization of the NLS
  
  --------------------------------------------------------------------
  Profile of cat.
  --------------------------------------------------------------------
  
  export ORACLE_BASE = / ora_client
  Export ORACLE_HOME = $ORACLE_BASE/OraHome_1
  Export ORACLE_TERM = vt100
  Export ORA_NLS33 = $ORACLE_HOME/ocommon/sln/admin/data
  Export NLS_LANG = American_america. KO16KSC5601
  Export TNS_ADMIN = $ORACLE_HOME/network/admin
  export PATH=$PATH:$ORACLE_HOME/bin:.:/ bin: / usr/bin: / usr/sbin: / usr/ccs/bin: / usr/ucb: / opt/perf/bin: $ORACLE_HOME/OPatch: / oracle/app/oracle10/product/102
  0/bin:.
  Export SHLIB_PATH = $ORACLE_HOME/lib: $ORACLE_HOME/lib32: $ORACLE_HOME/network/lib: / usr/lib
  Export DISPLAY = 172.23.19.134:0.0
  export PATH=$PATH:/opt/java1.5/bin:/opt/java1.5/jre/bin
  --------------------------------------------------------------------------

  Hello
  By default, the software permissions do not allow most users to access and run the files under $ORACLE_HOME a lot. To change this and 'relax' the permissions, you must run $ORACLE_HOME/install/changePerm.sh.

  Kind regards
  Harry

  http://dbaharrison.blogspot.com/

  Published by: harry76 on July 13, 2011 16:37

• Flash CS3 crash initially upwards on Win XP SP2

  I have a terrible problem. Had my Premium design CS3 a few months ago. I started with no activation and use all software without damaging - as flash. I need to reinstall the system anyway (for other reasons). After reinstallation of the system Flash suddenly stopped to start. It crashes when the red screen red welcome is shown on stage "initialization of fonts" or just after her... so for a very short overview the main frame appears and all disappear leaving no error in newspapers win. I was searched by internet to try to find a solution. I found those such as QuickTime and Flash Video Encoder, uninstallling verified fonts corrupted... I was installing and then uninstalling endlesslly... nothing helps. of course, I had my work time, so finally, desperately, I decided to reinstall the system again and install all of the software on any system clean. So I didn't.
  After been installed, I tried the Flash and that made me very happy, flash has started up with no harm... my happiness lasted very short until windows has downloaded and installed the updates. After downloading Flash began to behave like before (crashing at first upward).
  
  Adobe support does not seem to support anyone... I called them again and they could only give me stupid as tips install and reinstall following new. If anyone has the idea, what is the reason and knows the fix, please help... I'll be very grateful that my work is totally blocked now.

  OK... After months of terrible struggle, I found the culprit... It is the UTILITY of MATROX POWERDESK-HF, which conflicts with the Flash CS3 - I don't know why he had no conflict before, I was ALREADY WORKING ON FLASH using the same machine and its configuration if.

  Anyway even when I've updated utilities matrox drivers he same problem, so have just got rid of this utility as it had no impact on work on my machine... all the features works well (including double head)

• Technical information 0 x 00008086 initially upwards

  Hi all.

  I have a laptop Toshiba Satellite L300. I get the blue screen with a message * 0 x 00008086 when I turn the laptop on, I have tried loading into safe mode & try to run Startup Repair mode option, but it eventully it always brings back me to the blue screen with the error message above.

  Can anyone help or what I need to contact Toshiba for repair?

  Hello

  You have the new notebook with valid warranty. If you cannot start on a regular basis, you can try to start the following procedure of recovery using F8 at startup option to fix my computer.
  Generally clean OS install should work but if there is the same problem again don't waste your time and contact the authorized Toshiba maintainer as soon as possible.

• Error 1935 projection upward when install a programe

  I tried to istall hmrc basic tools, but a 1935 error appear and after installation the program of basic tools does not, but who says side by side configuration is incorrect, how to fix this?

  Hello

  To resolve this problem, install the redistributable Microsoft Visual C++ 2005 Service Pack 1 (SP1) (x 86).

  For the Microsoft Visual C++ 2005 SP1 Redistributable Package (x 86), visit the following Microsoft Download Center Web site:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=200B2FD9-AE1A-4A14-984D-389C36F85647&displaylang=en

  If you need the 64-bit version:
  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=eb4ebe2d-33c0-4A47-9dd4-b9a6d7bd44da

• My Dell XPS 8300 hard drive fails? Intel Rapid Storage detects the error when starting upwards.

  My computer (dell xps 8300) has recently frozen and when it restarts it scored one of my RAID 0 hard drives as being a mistake. Surprisingly, my computer still works as always and after an investigation, I traced the gel to vuze trying to check a file after he was already down. I deleted the files causing the freeze and have not yet encountered any more freezing problems. But I'm still very worried, so I ran a disk check, who quickly said the disc is clean, and I also ran tests HD (Long & short) dell support center several times and they always say that readers are working properly. Today, I ran a checkdisk windows another who had a lot more time but seem to come clean. But to restart the computer disk was marked later once again as being a mistake. So I ran the tests of short and long and difficult road dell support center, once again, and the sound still saying everything is working properly. I then decided to try to start some other diagnostics of hard disk: seagate seatools and rescuer of Western Digital. The player has passed the tests of the Seatool, but almost immediately failed the tests of rescuer WD giving the error that there are too many bad sectors. Any advice on how to proceed would be much appreciated!

  Lack of an operating system is the message you get when in fact there is a properly peripheral storage seen by your BIOS, but it is not a valid partition with a valid boot sector table.

  I fear that you may have installed the operating system on a RAID-0 configuration and only now try to start from one half of the band?  Yes, you can WD 500 GB RAID-0 an and a 1 TB Seagate together.  It would be foolish (same capacity as a single player, but all the falls of RAID-0) but the computer doesn't know any better.

  The RAID configuration (breaking apart the RAID) must arrive before the installation of the o/s.  The RAID/mobo card is one of the early stages of the process, he takes these 2 physical disks and mounted as a storage to the motherboard, allowing it to boot from it etc.

  No matter what is happening currently, my advice would be to remove the RAID from the system discs.  You don't want a broken drive / failure connected, even if you do not use it because the computer will continue to warn / complain the RAID broke, the startup BIOS will be keep showing you a disc is seen mistakes SMART, and finally the failed drive can degrade to the point it actually damage something.

• an error occurred initializing SQL Server compact etc... any help?

  I must have deleted something while I was cleaning on some software that address any suggestiions?

  Hi Ptolemy,

  You get this error message is because an application is in an unknown state or an update of the application has been interrupted.  Usually, this is related to the Vaio Messenger.  VAIO Messenger is a tool that allows Sony to communicate directly with users with the latest information about management of PC, updates and supply.  Please follow the steps in the link below to fix the problem.  Need Adobe reader to open the file.  I hope this will solve your problem.

  http://www.DDNI.com/vmsupport/documents/VAIO%20Messenger%20Uninstall%20and%20Reinstall%20For%20Custo...

  http://Get.adobe.com/Reader/ - adobe reader software

  Nick-

• My system is initially upwards

  Hello

  My system complains of a primary battery (601) to be low, please what battery is making reference to?

  Peters.

  It refers to your main laptop battery. Download and run this utility to test your battery:
  http://h20239.www2.HP.com/TechCenter/battery/battery_ts.htm>

  SC Tom

• Error 0 x 80096001, several errors during the installation of Visual Studio, or running Windows Update or defender.

  Hello. I wanted to run Visual Studio 2010 Express edition on my Vista Home Premium, but ran into way too many problems. First of all, download have not installed because of a problem with the installation of .NET framework v4.0. Then I tried to VS 2008, but has encountered the same problem with the .NET framework. Whenever I try to run Windows update, it displays error Code 80096001 and said "Windows could not check for new updates. So I tried to download .net directly from microsoft downloads, but whenever I try to install it, it says I need to turn on .net "turn on or off windows features", in the control panel. I tried, but the list is completely empty, it shows nothing at all. I downloaded the vista sp1, but it too installation stops with error code 0 x 80096001.
  I tried to disable my anti-virus (avg free). Windows Defender does not initially upward or through subsequent attempts to run it. It shows the same error code. Please advise on how I can solve these problems and use Visual Studio... it's very frustrating because I never had these problems with XP... everything worked.

  Seems like a lot of corruption. Try Windows 7 repair:
  http://www.SevenForums.com/tutorials/3413-repair-install.html

• Error 0 x 80096001, several errors when trying to install MS VS 2008, Vista SP1 and when you try to run Windows update or Windows Defender.

  Hello. I wanted to run Visual Studio 2010 Express edition on my Vista Home Premium, but ran into way too many problems. First of all, download have not installed because of a problem with the installation of .NET framework v4.0. Then I tried to VS 2008, but has encountered the same problem with the .NET framework. Whenever I try to run Windows update, it displays error Code 80096001 and said "Windows could not check for new updates. So I tried to download .net directly from microsoft downloads, but whenever I try to install it, it says I need to turn on .net "turn on or off windows features", in the control panel. I tried, but the list is completely empty, it shows nothing at all. I downloaded the vista sp1, but it too installation stops with error code 0 x 80096001.
  I tried to disable my anti-virus (avg free). Windows Defender does not initially upward or through subsequent attempts to run it. It shows the same error code. Please advise on how I can solve these problems and use Visual Studio... it's very frustrating because I never had these problems with XP... everything worked.

  Seems like a lot of corruption. Try Windows 7 repair:
  http://www.SevenForums.com/tutorials/3413-repair-install.html

• Affected by a RunDLL Error Loading:C\Windows\kbepshsp.dll error message - download MSRT does not open.

  Affected by an error message RunDLL Error Loading:C\Windows\kbepshsp.dll initially upward in normal mode. Download MSRT on the recommendation of the forum to run a full scan (already ran full scan using installed McAfee AV suite - found all OK, but he did not trust). She would not run, open after registration on the C drive or rename and recording on USB. Any suggestions?

  Affected by an error message RunDLL Error Loading:C\Windows\kbepshsp.dll initially upward in normal mode. Download MSRT on the recommendation of the forum to run a full scan (already ran full scan using installed McAfee AV suite - found all OK, but he did not trust). She would not run, open after registration on the C drive or rename and recording on USB. Any suggestions?

  It seems that your computer is infected. The dll file that reference you is not a file valid which is a good indication of malware. Click on the links below and download Superantispyware Portable. The scanner does not install or need to update assuming that you perform analysis in a reasonable amount of time after download.

  Superantispy-portable

  Once you have scanned with the download above, update and choose a full scan with Malwarebytes link below.

  Malwarebytes.org

  Then, click on the link below and download TDSS Killer. It is a rootkit detection tool. The scan is very short. Read the prompts on the screen. If you continue to have problems after you run these scans after return.

  TDSSKiller.exe

  I do not vote for me I'm not here for points. If this post helps you, vote. Visit my forum @ http://repairbotsonline.forumotion.com/forum.htm