Error 1935 projection upward when install a programe

Similar Questions

• Install the Error Message, you must be logged in as an administrator when installing this program.

  When I try to install cleaning msconfig program and other programs, but not all.

  I get this error message "You must be logged in as an administrator when installing this program.".

  I'm loggedd as an administrator and I try right click Run as administrator, I get the same message.

  I am running Windows 7 home pre.

  Yes, I have not done so, no help. I have fix the problem to reinstall.

• Error codes when installing the program, 0 x 80040200

  I get the following error codes while attemmpting to install a program:

  0 x 80040200

  0x8002801c

  0x80004005

  Can anyone help

  The application tried to install has been e - tds_RPU_2.1.exe from the link below:

  The link is http://www.tin.nsdl.com/Downloadsquarreturns_regular.asp

  Hello RAVICHANDRANR,

  It is possible that some dependencies that are not loaded correctly. I would like to try and install by right clicking on the installation or the configuration file and select "Run as Administrator".
  Then try and save the OCX manually using regsvr32.exe.

  To register:

  Unregister and register again:

  1. click on Start Orb, in the start search box, type spr32x30.ocx /Unregister. and then click OK.

  2. click on Start Orb, in the search box to start, type spr32x30.ocx/REGSERVER, and then click OK. After you run this command, the operation is complete.

  3. now try again to your installation.

  "If this doesn't help, then because the SPR32x30.ocx seems to be spreading" "FarPoint Technologies, Inc., I suggest you post in the Forums of Far Point community listed below. http://www.clubfarpoint.com/forums/forums/default.aspx

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Error 1335 when installing a program

  What to do when I have this message when installing a program on my Windows 7 computer

  Hello

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

  Thank you

• This message appears when installing a program on windows 7, how can I solve this problem?

  "An error occurred during which create the directory: c:\Users\Dell\AppData " this message appears when installing a program, how can I solve this problem?

  Hello

  1. what application are you trying to install?
  2. are you having this problem only during the installation of this particular application?
  3. did you of recent changes on the computer before this problem?

  Method 1:

  I suggest you run the fix it and check if it helps.

  Diagnose and resolve program install and uninstall problems automatically.
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/en-us

  Method 2:
  If the problem is not resolved I suggest to try the steps and check if that helps.

  a. When you try to install the program, go to this folder:

  C:\ProgramData\Microsoft\Windows\Start Menu
  
  b. right-click on the folder and then click Properties.

  (c) in the Properties window, click Security tab.
  
  d. click Edit and then click Add.

  e. all type in the box, and then click OK.

  f. then Select the full control check box.

  g. click apply and then click OK.

  Check out the link: what to know before applying permissions to a file or folder
  http://Windows.Microsoft.com/en-us/Windows7/what-to-know-before-applying-permissions-to-a-file-or-folder

  Method 3:

  If the problem persists, you can check if all background programs is the origin of the problem.

  To check this, you need to put the computer in a clean boot state and try to install the program. To put the computer in a clean boot state, follow the link below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  For more information, please see the link.

  Install a program
  http://Windows.Microsoft.com/en-us/Windows7/install-a-program

  Hope this information is helpful

• I use Photoshop Cs5 on a PC that has been installed by the manufacturer of my PC in 2011, I tried to use it yesterday, and I get an error message saying to re - install the program. I have no knowledge on how to help.

  I use Photoshop Cs5 on a PC that has been installed by the manufacturer of my PC in 2011, I tried to use it yesterday, and I get an error message saying to re - install the program. I have no knowledge on how to help.

  Hello

  Please access "' programs and features'" and uninstall the Photoshop CS5 and access the link as follows to download the program installation of Photoshop CS5 and re - install and activate it with the serial key you have.

  Download Adobe Creative Suite 5 products

  Thank you.

• Moved not FSX gives error 1935 at end of install on W7 Ultimate 64 bit system.

  New system of four-core 64-bit w / 12G ram and 1 G graphics card

  new installed W7 Ultimate system

  FSX Installer failed: Error 1935 (message about public key token and 32-bit processor)

  How can I install it in this system? Am I obliged to enter in a mode of compatibility or virtual system? I hope not.

  Hello

  Flight Simulator X is compatible with Windows 7, so you don't need to install in compatibility mode.

  First, remove any which instance of Flight Simulator X (FSX) of your computer and then try to install the program in the clean boot state.

  See this article for more information on the clean boot:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Steps to perform a clean boot:
  a. click the ORB start on your desktop
  b. type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  c. in the general tab, click Selective startup.
  d. under Selective startup, clear the check box load startup items.
  e. click on the Services tab, select the hide all Microsoft Services check box and then click Disable all.
  f. click OK.
  g. When prompted, click on restart.

  NOTE: Please check that you start the computer in normal mode after a repair. Follow step 7 article.

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers Feedback Forum and tell us what you think.

• Error 0 x 80070005 when installing Windows Vista service pack.

  Cannot install service packs on vista ultimate. have tried since 3/2009

  Here is the accesscheck running of generated text

  HKLM\software\Microsoft\Windows\CurrentVersion\Component Servicing\Retry Agent of base
  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm
  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\VistaSP1-KB936330~31bf3856ad364e35~x86~~6.0.0.18000
  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\VistaSP1-KB936330~31bf3856ad364e35~x86~~6.0.0.18000\InstallCounter

  Error code 0 x 80070005 is also described as ACCESS DENIED (you may not to install updates.

  Please check that you are logged into an account with administrative privileges.

  This problem may be caused by third-party security programs such as firewalls and antivirus software.

  "Please follow these instructions if you are experiencing this error code during checking or install updates via Windows Udpate. What follows applies only to Windows Vista.

  1. Download AccessChk (Sysinternals).  This tool allows you to assess the level of access of some users or groups of resources, including files, directories, registry keys, global objects and Windows services.  Here is the link to download the tool: http://technet.microsoft.com/en-us/sysinternals/bb664922.aspx

  2. save the zip on your desktop and extract the file:
  -Right-click on the file and select extract all...
  -Click Next when prompted for the Destination.

  Therefore, you should see a folder called AccessChk on your desktop.

  3. open the folder AccessChk

  4 press and hold the shift key and right-click in the window.  Select "open here command prompt.

  5. a command prompt window should open a similar message:
  C:\Users\\Desktop\accesschk >

  6. type the following command and press ENTER:
  "" AccessChk.exe "nt service TrustedInstaller" s - n k ' hklm\software\Microsoft\Windows\CurrentVersion\Component Based Servicing "> accesskchk.txt
  Tip: You should be able to copy and paste the command into the command prompt.

  7. close the command prompt window.  Open the Accesschk folder on your desktop (if it has been closed).

  8. double-click on Accesschk.txt (text file), it should open Notepad.

  If this is insufficient,

  1 if please download the subinacl.msi from the following link and save the patch to installation on the desktop:
   
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads
  SubInACL (SubInACL.exe)
   
  2. go to your desktop and double-click on the downloaded file.
  3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.
  4. click on the button 'Start' in the 'Search' bar type: "Notepad" (without the quotes) and press ENTER.
  5. copy the following commands, and then paste them into the opened Notepad window:
   
  off @echo
   
  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f
  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = system = f
   
  @Echo =========================
  Completed @Echo.
  @Echo =========================
  @pause
   
  6. After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.

  7. refer to the desktop and right click the reset.bat file, then choose "Run as Administrator".

  8. you will see a window of type BACK treatment.
   
  NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."

  Note: On some driver update installation procedure, we also received this error code, please redirect this kind of case to the Team System Vista, because it can be considered for structure of third-party programs.

  Look for updates after that.

  Hope this information is useful.

  This problem may be caused by third-party security programs such as firewalls and antivirus software. You can disable or remove to check the issue.

  From: Microsoft Answers Support Engineer
  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads "

  My notes - TaurArian [MVP] 2005-2011 - Update Services

• Error: 0 x 80280006 when installing Windows Movie Maker 2.6

  I still get and error message error: 0 x 80280006 when you try to install Windows Movie Maker 2.6. The information indicates that

  the codec has not been installed because the box options has not been verified before downloading program.  I have not yet found none

  options box.  I used Windows Movie Maker on Windows XP on a computer with a 32-bit system earlier, but have not been able to

  install on Windows 7 on this 64 bit laptop.

  Windows Movie maker 2.6, is NOT a "new and improved" program

  On the contrary, the 2.6 version is just a "watered-down" version It is used for some Vista computers that are unable to support its native version of 6.0 integrated which, in my opinion, is the best version of Windows Movie Maker.

  2.6 is compatible with Windows 7, but why waste your time when Win 7 can have Windows Live Movie Maker that is intended for Windows 7?

  Please don't waste your time at the 2.6version facility.

  Install Windows Live Essentials 2011 which includes Windows Live Movie Maker.
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-essentials

  Note: it is a Windows Live Essentials 2012 available, but I don't know if it's a "Beta" or a final version. I installed it and it seems fine.  WLE 2012 also includes Skydrive in the package.

• Error 1935 at trial download & install Elem11

  What is 1935 error that appears when you try to download Elem11 new purchase?

  Xscouse I think that you receive Error 1935 when installing the software.  You can find details on how to fix your current difficulties Error 1935. Assembly Microsoft.VC80.CRT component | Install | CS4, CS5, CS5.5 products | Windows - http://helpx.adobe.com/creative-suite/kb/error-1935-assembly-component-microsoft.html.

• Error 0 x 80070490 when installing Windows7 in the other drive other than this drive containing 10 genuine Windows

  I bought a new computer HP laptop, real Windows Home 64-bit 10 unique language pre-installed.
  First of all, he had only 1 road 931GBs then I did 3 local drive out of it. Car with Windows 10 of 450GBs and other 2 discs of 301GBs and 150GBs.  20GBs is for recovery in the automatically created separate drive.

  Although install Windows7 into another player who may not have 10 Windows installed. At the start of start, this error 0 x 80070490 appears on the screen.
  I tried to use a Boot-able USB pen-drive, Windows DVD but nothing happened.

  Kindly help me with steps or spikes to overcome this problem and I would like to be able to install another windows
  NOTE that I don't want to lose my true Windows 10

  Hello

  I apologize for not speak to you within a reasonable time. Let me help you solve the issue.

  I suggest you mention the link below and follow the advice given by cheque and André costa, if that helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/when-installing-Windows-7-receive-error-code/73e05a03-385C-43AA-93BB-562d3330db50

  I also suggest you to see link below and check if that helps:

  Error code 0 x 80070490 when you use Windows Update or Microsoft Update to install updates

  http://support.Microsoft.com/kb/958044/en-us

  Keep us updated on Windows related queries and we will be happy to help you further.

• Error code 601.64 when installing new software

  Original title: get an error code of 601.64 when downloading new software on my new laptop HP windows 7

  I recently bought a computer Presario CQ61 HP compaq laptop with windows 7 installed.  Buy HP deskjet all Pro 8500 printer etc. and the installation CD it won't let me download because of my boot operating system.  601.64 code what do I do?

  Hi Paulajwood,

  This could happen if the CD you are using is damaged or non-functional. Follow the link below and download the full feature software and driver and try to install and control what happens.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?LC=en&DLC=en&cc=us&lang=en&product=3752459&

  If you still get the same error message please post back with the exact error message and error code.

  Before installing the drivers, put the computer in a clean boot, and then check what is happening. To put the computer in a clean boot follow the link below

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you did with the troubleshooting step 7 follow-up in the same link to put the computer in normal start up.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error: "WindowsUpdate_8007063" and "WindowsUpdate_dt000" when installing updates in Windows 7 machine.

  Original title: 80070663 error code appears when...

  This error code is displayed when I try to manually update the "WindowsUpdate_8007063" and "WindowsUpdate_dt000".  The automatic update has not once or twice each of these 8 days or more.

  you have problems with

  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  If you use Microsoft Office, you can run the Microsoft Fix it 50461 that corrects the problem. Look at the following KB:http://support.microsoft.com/kb/2258121>

• error code 432 trying to install new programs

  Can not install new programs: during the installation of the disk, computer install 99%, then gives me this message: Setup has detected that uninstall is already running. Please close, uninstall and restart the installation.

  Hi rlnoakes,

  Thanks for posting. Rename all instances of IsUninst.exe to IsUninst.exe.old from the SystemRoot directory and run the Setup again.

  I hope this helps!

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Error when installing msn program: Microsoft Visual C++ Debug Library Debug Error ProgramC\ProgramFiles\MSN\MSNInstaller\msniadm.exe

  Original title: Microsoft Visual C++ Debug Library Debug Error ProgramC\ProgramFiles\MSN\MSNInstaller\msniadm.exe

  I am trying to reinstall MSN on my computer - XP Professional - and I get the following installation error message

  MICROSOFT VISUAL c ++ DEBUG LIBRARY

  Debugging error

  ProgramC\ProgramFiles\MSN\MSNInstaller\msniadm.exe

  Abnormal end of program

  Please retry to debug the application

  The program and the installation ends when I try to start again

  What can I do to reinstall successfully the program MSN? Thank you!

  edited for the protection of personal information *.

  Hi Richard,

  One thing to try is that you can try to reinstall the Microsoft Visual C++ Runtime from here
  In addition, background apps can actually interfere with the installation of MSN, try to perform a clean boot to see if there are programs in conflict
  See you soon ~
  PS - MSN Support is very limited. Do not rely on them