Error: "WindowsUpdate_8007063" and "WindowsUpdate_dt000" when installing updates in Windows 7 machine.

Similar Questions

• Error 643 and 8004FF01 when installing updates

  original title: problems with Windows Update

  Windows Vista Business Gets the error message 643 and 8004FF01 when you try to install the updates. In addition, there is an error of Windows Installer produced as well.

  Adding to the suggestion of Hula_Baloo you can also try the following.

  Method 1: reset the Windows Update components.

  http://go.Microsoft.com/?linkid=9665683>

  This tool automates the most common fixes problems with the Windows Update site. Note this fix it Solution has two modes by default and aggressive. You must run the fix it solution in default mode and determine if it solves your problem with Windows Update before running it in aggressive mode.

  Method 2: check the status of Windows Installer and installer of Modules of Windows.

  I. click on start and type Services.msc and press ENTER.

  II. Locate the Windows Installer Service.

  III. double click it to check if the service is started or not.

  IV. change the type of startup to automatic and Start the service.

  V. check the same thing for Windows Installer of Module service.

  VI. Press ok and close the Services window.

  UTC/GMT is 16:04 15 may 2012

• Get the 8007371B error code when installing update for Windows Mail Junk E-mail Filter [December 2009] (KB905866) _

  When I run Windows Update it shows an important update available. "Update for Windows Mail Junk e-mail filter [December 2009] (KB905866).
  When I try to install the update, it downloads, create a restore point and starts to install the update.  The green bar goes all the way to the right and then I get a "failed" message with a 8007371B unknown error code.
  KB905866 appears in the list of installed programs.  I tried to uninstall and rerun the update of Windows, but he continues to go through the same sequence of activities having the same error message for result.

  Is there a solution?

  Last successful update was (November 2009) 11/11/2009
  First update failed (December 2009) on 09/12/2009

  SP2 has been installed.

  SP2 has been installed 03/07/2009

  Update tool for Windows Vista... (KB947821) has not been installed.

  I'm currently running AT & T Internet security from McAfee.

  This machine had Norton and AVG anti-virus in the past that I don't really know what was running back in July.

  I'm currently running AT & T Internet security from McAfee.

  This machine had Norton and AVG anti-virus in the past that I don't really know what was running back in July.

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file that you saved in #1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. now, make this McAfee "triple fix": http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  Test.

  PS: Please don't substantially edit a message from you after that someone has replied to it or a post later of yours in the same thread. THX

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Get error 0 x 80070005 when installing updates for vista

  I tried the steps mentioned by Kim.

  I get the following error in the accesskchk file

  Error opening of HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~x86~~7.4.7600.226:
  The system cannot find the specified file.

  No matching items found.

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Error 1316 and 1603 when installing HP Active Support Library and Support HP

  Original title: Error 1316 and 1603 questions

  I am trying to install HP Active Support Library and HP support on my Vista laptop.  I keep running into the same mistakes: 1316.A network error occurred trying to read from the file c:\Windows\Installer\HP Library.msi active support - I then click ok and the installation is restored, and then I get the error: 1603 Fatal error during installation.  Consult windows help install (Msi.chm) or MSDN for more information. I looked in my windows folder and I have no file.  Can someone please tell me what to do?

  Hey, Lestat,.

  There is an article in the Knowledge Base by HP talking Error 1316 and 1603, during the installation of the HP software. Follow the suggestions listed in the links below and you should be good to go.

  Fatal error ' Error 1316. Network error occurred trying to read . "(MSI Error 1316) displays during the Installation of the software in Windows XP

  The steps described in the article above also apply to Vista.

  Fatal error ' error 1603. A fatal error occurred during installation "(MSI error 1603) displays in HP Software Installation in Windows

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get the error code 80200010 & 8020000E when I update my windows 7, 64 bit

  The update I get error for is called: "update for windows Silverlight (KB979202).

  • Windows Update failed to install
  • Code errors, I get are 80200010 & 8020000E
  • My pc is new and did not any changes that it
  • I did no pricing yet, waiting for your comments
  • Validated my windows to make sure that it works and it is

  You will find help in the forum: http://forums.silverlight.net/forums/13.aspx ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error code 66A, 800706BE and 800706BA when installing updates.

  What should I do? All updates are important, and some have been waiting for a long time now that I have not had time to find solutions (and I'm still you wonder why should it be me who find solutions to AUTOMATIC updates...)

  Please advice clearly, I'm not a tech genius!

  Hello
  • Who is the update that you are trying to install?

  You can use the following methods that can help you solve your problem:

  Method 1:

  I suggest to fix the .net framework functionality in Windows and then try to install the update.

  Steps to repair Microsoft .net Framework

  a. Click Start, and click Control Panel.

  b. navigate to the program and features.

  c. scroll down for Microsoft.Net Framework 4 Client Profile, do a right click.

  d. it will give you a choice of uninstall/change, click it.

  e. then it will give a choice to repair it, choose repair. It will take about 4 to 10 minutes to repair (with my PC), your experience may vary.

  f. When finished, open Windows update and update again.

  Method 2:
  a. Click Start and type Services in the search bar and click on enter.
  b. go to the following Service and make sure the following boot parameters are enabled:

  • Remote procedure call (RPC) - automatic
  • Remote Procedure Call (RPC) Locator - Manual

  c. If you need to change one or two parameters, restart and check again to make sure that the two settings are still in effect.

  Method 3:

  If this isn't the case, perform the methods listed in the section below and check if that helps to install the updates successfully. http://support.Microsoft.com/kb/940520

• Error 646 when installing updates in windows Vista

  Hi, I need someone to help me on this problem while trying to install on my Vista windows updates, I am constantly the error code 646... I tried to install them manually as well, however without much luck... can someone guide me, please?

  Thank you
  Ajith

  Option: File of Windows Update agent wups2.dll is incorrectly registered and the registry associated with the Wups2.dll file files are missing.

  Method 1: Save the Windows Update files

  1. Click Start and type notepad in the box start the search.
  2. click on Notepad in the list programs.
  3. copy the following commands, and then paste them into the opened Notepad window:
  REGSVR32 WUPS2. DLL/S
  REGSVR32 STINKS. DLL/S
  REGSVR32 WUAUENG. DLL/S
  REGSVR32 WUAPI. DLL/S
  REGSVR32 WUCLTUX. DLL/S
  REGSVR32 WUWEBV. DLL/S
  REGSVR32 JSCRIPT. DLL/S
  REGSVR32 MSXML3. DLL/S
  4. in Notepad, on the file menu, click Save as.
  5. in the file type list, click all files.
  6. in the file name box, type register.bat.
  7. save the Register.bat file to your desktop.
  8 right-click the Register.bat file, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password or click on continue.
  9. try to reinstall updates.

  http://support.Microsoft.com/kb/958053
  See: method 1: save the Windows Update files

  http://support.Microsoft.com/kb/326253
  Method 5: Registry Windows Update engine files

  http://support.Microsoft.com/kb/971058
  How to reset the Windows Update components?

  Method 2: Download and install Windows Update agent

  Windows Update Agent

  How to get the latest version of the Windows Update Agent to help manage updates on a computer
  http://support.Microsoft.com/kb/949104

  Information for network administrators about how to obtain the latest Windows Update Agent
  http://support.Microsoft.com/kb/946928

  Click Start, click run, click Browse, navigate to the file you saved and click Open.

  Add the switch /wuforce at the end of the command run and then click OK. For example, the command run might look like this: "C:\WindowsUpdateAgent30-x86.exe" /wuforce

  Click run.

  Follow the steps to complete the wizard.

  Important

  To reinstall Windows Update Agent - download the relevant file from one of the links provided above and save it to a drive where Vista is not loaded because the file cannot be launched directly from the root directory of the system.

  Click Start, run, type: "D:\WindowsUpdateAgent30-x86.exe /wuforce" (without the quotes) and press ENTER to install the Windows Update engine.

  Note: There is a space between "D:\WindowsUpdateAgent30-x86.exe" and "/ wuforce.

  D: is the drive where Windows is not installed (IE a flash drive or a 2nd hard drive etc.)

  TaurArian [MVP] 2005-2010 - Update Services

• When installing updates for Vista I get the error code 80070490

  Whenever the automatic installation updated it gets error 80070490 and he falils to install all updates

  On what edition of Windows and what level of Service Pack, please?

  (1) you receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  "This problem can occur if there is corruption in component maintenance (EC) manifest."

  (a) run sfc/scannow from a command prompt
  http://support.Microsoft.com/kb/936212

  If the above does not resolve the error...

  (b) download, Saveand then run the update system (or CheckSUR) tool - http://support.microsoft.com/kb/947821

  (c) no joy? To resolve this problem, you can try to perform a repair of Windows Vista or Windows 7 installation
  http://blog.taragana.com/index.php/archive/how-to-do-a-repair-install-to-fix-Windows-7/

  Run a repair installation will restore the current installation of Windows to the version of the installation DVD. It also requires the installation of all the Service Packs and updates that are not included on the installation DVD.

  For Advanced users.

  (2) how to overcome error 0 x 80070490 when installing updates in Windows
  Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

  Expert MowGreen Windows IT Pro - consumer safety

• continue to be "WindowsUpdate_80070490" "WindowsUpdate_dt000" cannot install updates

  ongoing for months.  have installed sp1 and sp2.
  use the AVG antivirus

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997

  or

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  Notes

  NB: If you have installed SP1 or SP2 for Vista

  method for Windows Vista, the * UPGRADE option is not available because Service Pack/s are installed and that your operating system is newer than the system you are trying to reinstall, so service pack/s must be removed in this case.

  Uninstall the Service Pack/s: How to uninstall Windows Vista service packs as a troubleshooting step
  http://support.Microsoft.com/kb/948537

  See also:

  How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

• Error 0 x 80070005 when installing Windows Vista service pack.

  Cannot install service packs on vista ultimate. have tried since 3/2009

  Here is the accesscheck running of generated text

  HKLM\software\Microsoft\Windows\CurrentVersion\Component Servicing\Retry Agent of base
  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm
  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\VistaSP1-KB936330~31bf3856ad364e35~x86~~6.0.0.18000
  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\VistaSP1-KB936330~31bf3856ad364e35~x86~~6.0.0.18000\InstallCounter

  Error code 0 x 80070005 is also described as ACCESS DENIED (you may not to install updates.

  Please check that you are logged into an account with administrative privileges.

  This problem may be caused by third-party security programs such as firewalls and antivirus software.

  "Please follow these instructions if you are experiencing this error code during checking or install updates via Windows Udpate. What follows applies only to Windows Vista.

  1. Download AccessChk (Sysinternals).  This tool allows you to assess the level of access of some users or groups of resources, including files, directories, registry keys, global objects and Windows services.  Here is the link to download the tool: http://technet.microsoft.com/en-us/sysinternals/bb664922.aspx

  2. save the zip on your desktop and extract the file:
  -Right-click on the file and select extract all...
  -Click Next when prompted for the Destination.

  Therefore, you should see a folder called AccessChk on your desktop.

  3. open the folder AccessChk

  4 press and hold the shift key and right-click in the window.  Select "open here command prompt.

  5. a command prompt window should open a similar message:
  C:\Users\\Desktop\accesschk >

  6. type the following command and press ENTER:
  "" AccessChk.exe "nt service TrustedInstaller" s - n k ' hklm\software\Microsoft\Windows\CurrentVersion\Component Based Servicing "> accesskchk.txt
  Tip: You should be able to copy and paste the command into the command prompt.

  7. close the command prompt window.  Open the Accesschk folder on your desktop (if it has been closed).

  8. double-click on Accesschk.txt (text file), it should open Notepad.

  If this is insufficient,

  1 if please download the subinacl.msi from the following link and save the patch to installation on the desktop:
   
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads
  SubInACL (SubInACL.exe)
   
  2. go to your desktop and double-click on the downloaded file.
  3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.
  4. click on the button 'Start' in the 'Search' bar type: "Notepad" (without the quotes) and press ENTER.
  5. copy the following commands, and then paste them into the opened Notepad window:
   
  off @echo
   
  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f
  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = system = f
   
  @Echo =========================
  Completed @Echo.
  @Echo =========================
  @pause
   
  6. After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.

  7. refer to the desktop and right click the reset.bat file, then choose "Run as Administrator".

  8. you will see a window of type BACK treatment.
   
  NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."

  Note: On some driver update installation procedure, we also received this error code, please redirect this kind of case to the Team System Vista, because it can be considered for structure of third-party programs.

  Look for updates after that.

  Hope this information is useful.

  This problem may be caused by third-party security programs such as firewalls and antivirus software. You can disable or remove to check the issue.

  From: Microsoft Answers Support Engineer
  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads "

  My notes - TaurArian [MVP] 2005-2011 - Update Services

• Do I have to re - install all my drivers and applications when I upgrade from Windows XP to Windows 7? __

  I have to reinstall all my applications and drivers when I update to Windows XP to Windows 7?

  When you upgrade Windows XP to Windows 7, a lot of drivers is upgraded as part of the process and your applications and settings must be migrated automatically. If you perform a new installation, you may need to find the drivers for your PC that are compatible with Windows 7 (or, if no driver is specifically available for Windows 7, use Windows Vista counterparts).

  You can also use Windows Easy Transfer to move your documents, photos, music and other files if you decide to perform a new installation. For more information about Windows Easy Transfer, please visit http://windows.microsoft.com/en-us/windows7/products/features/windows-easy-transfer.

  Hope that helps, have a nice day! Kristan M. Kenney ("Nighthawk64")

• Error code 646 when installing updates KB2288953, KB2288621 and KB2291599

  I get the error code 646 when installing updates KB2288953, KB2288621 and KB2291599.  My Dungeon udates on default.

  read the problems known in this page, they explain what to do. There is a link to a fix the article.

  http://support.Microsoft.com/kb/2258121

  Let us know if this helped.

• I keep getting failed to install with error codes 643 and 646 on my Vista, when I install updates for Windows... What should I do?

  I keep getting failed to install with error codes 643 and 646 on my Vista, when I install updates for Windows... What should I do?

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Download 80080005 error message when you try to install updates in Windows Vista.

  Original title: error 80080005

  Hello

  I'm still not able to run windows update. Automatic repair of Microsoft did not work, nor has repaired all in one Windows. I get error 80080005. Someone at - it ideas please. I am running Windows vista SP2.

  Hello

  Thanks for posting in the Microsoft Community Forum. Rest assured that we would do our best to help you.

  Try these methods and check:

  Method 1: First of all, make sure that no proxy server is causing this issue.
  a. click on the round to start, in the search field type cmd
  b. right click on cmd.exe and select 'run as administrator '. Accept the UAC prompt.

  c. has the prompt, enter the following command exactly as written including spaces and press enter

  netsh winhttp see power of Attorney

  If this message appears, type exit, and then press ENTER.

  Method 2:

  Check if the bits service is started.

  a. click Start, type services.msc

  b. Locate the Bits (Background Intelligent Transfer Service) service.

  c. double-click on it and check if the service is started and the startup type is set on automatic.

  Method 3:

  I suggest you follow the steps mentioned in the link one at a time and check.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  If the steps do not help, then follow the steps in the next method and check.

  Method 4:

  You can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. The following article explains how to solve problems in Windows Vista or Windows 7 by performing a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Put the normal computer as mentioned in step 7 of section.

  Method 5:

  I suggest you follow the steps:

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  After you follow the steps of troubleshooting provided, if you get the error message please response so that we can help you further.