error 209 (code type 13 1)
My server is about 94% and fails with the error 209 (code type 13 1). Much of my research says it's a bad block on my table to disk. I ran chkdsk and it has no back problems.
The server is a server 500 GB C: running Windows 2003. I'm P2V in a C:\p2v folder on the same server. Still working?
I managed to P2V using disk2vhd. It took a while, but it worked without error. I think my problem with vmware converter was the issue of disk space. I was able to clean a space. I'll try again with the vmware converter
Tags: VMware
Similar Questions
-
I have developed and delivered a system in Germany several years ago. He worked then. But the cRIO was damaged and replaced by a newer model, and does not now. I suspect (and Support technical OR agree) it's a problem of software version, which could be solved with the NOT-MAX Software Installer. But I do not have access to the system myself, and correspondence is slow and tedious.
The original system was a cRIO-9073, developed with LabView 2009. He used the implicit Messaging. The ID of Instance, sizes, IP addresses, etc everything has worked very well.
The current system is a cRIO-9074, with LabView DURATION 14.0 (I guess that LV 2014), Scan Engine 4.3, NI - Industrial Communications for Ethernet/IP 14.0.0, etc. Programs FPGA and processor are responsible and seem to work in the cRIO. The "EthernetIP Set Assembly Instance Data.vi' will return no error. But the PLC just pointing out "(Code 16 #0315)" connection request error: invalid segment type "." We looked at intellectual property (the mistake was different), sizes and body #s.
The PLC doesn't have to all be modified.
Anyone know if there is no problem of compatibility with LV-2014 and Ethernet/IP 14.0.0? Or if there are all the other required packages?
I am including the NOT-Max reports.
Hi ZX81
To help you 2009 application to work with the new cRIO, you must deploy it to the device. You must in order to deploy the cRIO, make sure it has the same versions of software that you used with the old cRIO.
You can format the cRIO NI MAX and deploy the application of LV, 2009. However, if you do not have access to the cRIO or your client does not have the necessary software, you can deploy the application in another cRIO with software (cRIO same model and same modules as your client) and create a picture of it and send it to your customer so that it can deploy the cRIO even without the software on his computer. The following document explains how to do this.
WenR
-
I get this error message: Code 80070663
I get this error message: Code 80070663 and it seems that there is no solution for it to what tells me the support. Please give me a process step by step in order to fix this problem please!
Step by step this path below that can help you to correct the error.
Click on the "Start" button, type "Windows Explorer" in the search box.
Click on the "Windows Explorer" in the "Programs" menu
Navigate to the path "c:/users/Allusers/Microsoft/Office/data", find "opa12.dat" file and rename it to "opa12old.dat".
When you restart Windows Office and open a file, it prompts you to turn on the Windows desktop, then activate it online.
Reinstall the updates from the Windows desktop, and then restart the computer.This solution of error on this site:
http://www.regmender.com/how-to-fix-Windows-Update-error-80070663.html
Hope it can help you. Good luck. -
Windows 7 update kb976902 released has no error 80070570 code
I can't find a solution to install windows update kb976902 published on 11/01/2011, who failed with error 80070570 code. My operating system is Windows 7 pro. Help!
0 X 80070570 - ERROR_FILE_CORRUPT
I recommend you:
Go to a command prompt:
Start, all programs, accessories, command prompt.
Right click on command prompt and select "Run as Administrator"http://windows.microsoft.com/en-US/windows7/How-do-I-run-an-application-once-with-a-full-administrator-access-token > and runsfc/scannow http://support.microsoft.com/kb/929833>
Type exit (to close the elevated command prompt window)
Reset
See if that solves the problem.
If not, run the update http://support.microsoft.com/kb/947821system tool >
-
When I try to print from Outlook Express I get a line: 2253, Char: 1 error: unspecified, Code: 0 URL: res://ieframe.dll/preview.js.
Go to start | Run and type (or copy / paste):regsvr32 ole32.dllPress ENTER. -
Windows Explorer has stopped working - error status Code - c000009c
Original title: Windows Explorer has stopped working - debilitating Error Message
On my main account, I keep getting an error message that pops up every 4 to 8 seconds and freeze the rest of the screen. It comes from Microsoft Windows and the error message indicates that Windows Explorer has stopped working the details include:
Signature of the problem
Problem event name - InPageError
Error Status Code - c000009c
Media Type-00000003 vulnerabilities
OS version - 6.0.60012.1.0.256.6
ID of locale - 1033
Additional information 1-40 d 4
Information additional 2-4062ad41ec8067256aa4c5e2b56d3c79
I can't access the internet and my computer through my secondary account - I of course tried closing down and restart a dozen times, I have ensured that all the Windows updates are installed and I am at a loss for what I could do. Any help would be so appreciated, because I'm working on my computer and couldn't since a few days - get desperate!
Thank you very much!
Thank you
Hi Jessicaco,
Please see the thread with a similar problem and fix possible:
I hope this helps!
-
Download the "error 0x8007000D Code" during the installation of Windows Vista.
Original title: 0x8007000D error Code
Hello
I tried to look at related issues of mine to see if the answer given in this section may be useful for me. Unfortunately, none of them were useful, so I decided to make my own thread to see if I get a response that will help me.
When I turn on my laptop (IBM Thinkpad) I get a black screen with writing: "operating system is not found" (not the complete text, sorry...)
Although I forgot to mention, I get this on another computer, not the one I'm currently using.
So I tried Google cela one realized that my OS was corrupted. I then tried to reinstall my OS using a CD bootable to Windows Vista Ultimate Edition. When I type in the product key in characters I get the following:
"Windows cannot open the required file D:/Sources/Install.wim.Make sure that all the files required for the installation and restart the installation. 0x8007000D error code. »
Now remember that I currently use another computer on this type because I can't get my screen to start the computer I get the 'operating system is not found' on. That's why can't get a diagnostic report.
This is where I got stuck & don't know what to do, I'm not sure if it's the CD that has the problem or product key, or maybe even the computer itself. Someone has an idea? What would be really useful.
EDIT: I also forgot to mention that I discovered the cell with the error was originally a Windows XP as OS, but when I bought it, the OS is a Windows Vista.
Hello
Welcome to the Microsoft Community and thanks for posting the question. Looks like you get the error when you try to install Windows Vista.
After researching the error 0x8007000D code is essentially due to file corruption and a problem with the drive itself.
Method 1:
First check if you have scratches or dust on the disc and clean the surface and try again.
Method 2:
Unplug all external/usb devices before installing Windows Vista.
If the problem persists after you perform the methods, you may need to contact the manufacturer of the computer or use another drive to install Windows Vista.Hope this information helps. If you have any questions with Windows do not hesitate to answer and we will be happy to help. -
Hello
Update of Internet Explorer 9 for Windows Vista (KB2744842) and update of security for Windows Vista (KB2712808). Doesn't have the error details: Code 80071 A 91.I can't solve this error that had been troubling since August 8. Can you please help.
Thank you
Please answer each of the following [admittedly tedious] diagnostic questions in a numbered list type in your very next answer (no need to quote this post):
1. when (date about) don't you buy the computer?
2. when (exact date) done, your Norton AntiVirus subscription expire?
3. any other application (for example, Norton Internet Security) Norton or McAfee application EVER installed on the computer?
4. do you have a free trial Norton, or a test of free McAfee [a] come preinstalled on the computer when you bought it? (No matter if you have never used or activated).
5 are these other updates update listed in updates installed (not update history)? [1]
(a) KB2722913, KB2705219, KB961501, KB2731847, or KB2736233;
(b) KB2698365, KB2691442, KB2655992 & KB2719985 [or maybe KB2721691];
(c) KB2685939 and possibly KB2686833.
(d) KB2658846, KB2659,262, KB2660649,562, KB2688338 & KB2690533 KB2676;
(e) KB2393802 KB2644615, KB2633171, and especially KB971029.
6a. is the 7 Version of Java Update 7 (or higher) installed? TEST HERE in USING INTERNET EXPLORER (ONLY!)-online http://java.com/en/download/installed.jsp
6 b. v11.4.402.278 is Adobe Flash Player (or higher) installed? TEST HERE in USING INTERNET EXPLORER (ONLY!)-online http://www.adobe.com/software/flash/about/7. Is Firefox, Chrome or any other alternative browser installed?
7 is Firefox or another alternative browser installed in addition to Chrome?
8 have you ever had the opportunity to do a repair installation or a clean installation of Windows?
9. are you familiar with "Registry cleaners" (e.g., Registry Mechanic;) System Mechanic; RegCure; RegClean Pro. Advanced SystemCare. Registry Booster; McAfee QuickClean. AVG PC TuneUp. Norton Registry Cleaner; PCTools optimizer; SpeedUpMyPC; PC Doctor; TuneUp Utilities; WinMaximizer; WinSweeper; Comodo System Cleaner. Advanced System Optimizer. CCleaner Registry Cleaner)?
==================================================
[1] start | Control Panel | Programs and features. See installed updates (in the left menu)[2] start | Control Panel | Windows Update | View the update history (in the left menu)
-
I cannot start the Windows Firewall, I get an error 0x6D9 code
Original title: error 0x6D9 Code
I cannot start the Windows Firewall, I get an error 0x6D9 code and I can't find less services. I am running Windows Vista, any help would be appreciated.
Thank you.
Original title: error 0x6D9 Code
I cannot start the Windows Firewall, I get an error 0x6D9 code and I can't find less services. I am running Windows Vista, any help would be appreciated.
Thank you.
1 know if your AV (anti-virus) program is supposed to disable your Windows Firewall. Some do it.
2. you do not do so in respect of the services? You do it in this way? ...............
Start > Search box, type ser > press the Enter key > scroll down to Windows Firewall...
under status, it lies and must say... Has begun
under Type of status, it must be said... Automatic
If it does not say that, right click on Windows Firewall > properties...
in Startup Type, click on the pointer, and then select Auto
to the service status, click Start
Click OK when finished.
-
I get an error COOD11B1 code when you try to play a video clip. __
I get a COOD11B error code when I try to play a video clip.
Hi Pat dubois,
1. what type of video file that you are trying to play?
If you receive error C00D11B1 code,
Cause one. It may be a problem with the components of security of your digital media player to play the files on your computer
Follow the instructions in the article given below, because it can help you solve the problem
Windows Media Player C00D11B1: http://Windows.Microsoft.com/en-us/Windows7/C00D11B1
Go to http://drmlicense.One.Microsoft.com/Indivsite/en/indivit.asp , then you will need to get the update. You need to download this patch to remove the error code and everything works again.
Also take ownership of the files you are trying to play by right clicking on the file and taking possession.
B cause. If you are probably trying to play a file that uses a codec that is not on your computer. I suggest you to download and install the latest pack of codecs for Windows Media Player 12 on your computer. Search using your search engine preferred for the third-party codec packs.
Codecs, frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questionsNOTE: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
Thank you, and in what concerns:
I. Suuresh Kumar - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
-
Windows 7 is not genuine & error 0xC004F063 code
Recently the windows phone 7 OS ultimate, said that this copy of windows is not genuine, so I tried to go online to solve.
When I went to the website they told me to go to (http://www.microsoft.com/genuine/validate/DownloadValidationSupport.aspx?displaylang=en&Error=52&sGuid=0491ab8d-4e8e-45ce-8fab-f03615d59081&OSV=6.1.7600.2.00010100.0.0.001.00.1033&GenuineInfo=C004F063&ls=3), I downloaded the update and after it finished I clicked "continue" but it kept telling me to wait for it to finish installing, even though it has already finished. So, not help.
When I tried to enter the activation code provided with the computer, it says that it does not work with my version of Windows 7 (more funny thing is, my computer came with a disk called "Windows 7" professional but after I installed it on my computer, it appears under Windows 7 ULTIMATE).
When I used a program to find my true activation code, error 0xC004F063 code came. I read somewhere that the difficulty I have downgrade to my previous version of Windows, which is XP, and re-setting level to Windows 7. I tried to do, but I never got past the 2nd step, which tells me to insert the Windows 7 disc in my drive and restart the computer. The Windows Installer never came after the reboot window.
Can someone tell me please how to fix the error 0xC004F063 code? I think this is the root of all the problems, because I do not think that any product key will work due to this error code. And please don't tell me to contact Microsoft technical support or anything like that because I don't have the time or patience to go through these steps, so please tell me directly how to solve.
I would try to revive by phone:
Activate Windows 7 manually:
1. click on start and in the search for box type: slui.exe 42. press enter on your keyboard
3. Select your country.
4. Select the telephone activation option and brace yourself for a real person.Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP
-
Receive error 0xC004E003 code when you try to activate Windows 7.
Windows Activation does not work!
I wanted to do a clean install of windows 7 pro, so I erased the hard drive, then re-installed from disc. Now I can't turn it on, I get the error 0xC004E003 code. WU does not work.
you use an OEM SLP key that works only when the OEM recovery media is used. It can be activated by normal means.
You need to change your product key to the one on your COA.Click Start, type slui 3, press on enter.Computers, which are built by large manufacturers provided with pre-installed Windows are supplied with 2 two product keys:
(A) OEM SLP: this key comes pre-installed in Windows, when it comes to the factory. This key is designed to work with the special instructions isn't on the hardware of this manufacturer. Then, when Windows was installed using the OEM SLP (in factory) Windows 7 key leans on the motherboard and he sees special instructions and activates. (that's why you had no need to turn on your computer after you brought it home)
(B) COST SLP: it's the product key that you see on the sticker on the side (or at the bottom, [or in the battery compartment]) of your computer. It is a valid product key, but must be used only in certain situations (for example, if the OEM SLP key stops automatic activation for a reason any). The key must be activated by phone. (Note: all manufacturers that use the SLP OEM system are bound by contract to include a certificate of Authenticity sticker (COA), which has a COA SLP key, on the computer)
-
Windows 7 Build 7601. When to activate the error 0xC004F063 code appears.
I reinstalled Windows 7 Home Premium on my computer 2 months ago and had no problems until last night when the wallpaper turned black and in the corner it says Windows 7 Build 7601, this copy of Windows is not genuine. My copy is authentic then when I'm go to type in my cd key to activate once again he gave me error 0xC004F063 code, saying that the Software Licensing Service reported that the BIOS is missing a required license.
I did not any changes to my computer in terms of hardware. I also ran a diagnostic report, as suggested, on similar topics. As a student, I use my computer laptop a lot for my work (and with a deadline tomorrow I'm panicking a lot) then I would be really grateful to anyone who can help me solve this problem.
Edit * I think I must insist on this point since many places say to activate by phone, my phone is a Samsung Q330 laptop and as such, I've noticed that it does not come with many features of Windows that would probably be available for others. Run slui.exe 4 does not open a box for me that allows me to choose a country for the activation of the phone (see below). And cannot not get me other ways to activate when I go into the properties of the computer.
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->Validation code: 50
Code of Validation caching online: 0x0
Windows product key: *-* - PWB9R - 4K7W4-2BT4J
The Windows Product Key hash: jlJIE69lzaXsu5B + X11cktZP6u8 =
Windows product ID: 00359-OEM-8992687-00015
Windows product ID type: 2
Windows license Type: OEM SLP
The Windows OS version: 6.1.7601.2.00010300.1.0.003
ID: {6C2EA258-E051-4177-81E2-FFE965BE026D} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Home Premium
Architecture: 0 x 00000009
Build lab: 7601.win7sp1_gdr.110622 - 1506
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{6C2EA258-E051-4177-81E2-FFE965BE026D} 1.9.0027.0 6.1.7601.2.00010300.1.0.003 x 64 *-*-*-*-2BT4J 00359-OEM-8992687-00015 2 S-1-5-21-1173309323-606346481-3968593654 SAMSUNG ELECTRONICS CO., Ltd.. Q330 Phoenix Technologies Ltd. 03UU. M002.20100708.WZW 20100708000000.000000 + 00063DE3C07018400FC 0809 0409 GMT Standard Time(GMT+00:00) 0 3 SECCSD LH43STAR 109 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7601.17514Name: Windows 7 HomePremium edition
Description: operating system Windows - Windows (r) 7, channel OEM_SLP
Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00359-00178-926-800015-02-2057-7601.0000-3032011
Installation ID: 008275367093604040748126005294827213486501520761357780
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: 2BT4J
License status: Notification
Notification reason: 0xC004F063.
Remaining Windows rearm count: 3
Trust time: 2011-10-30 14:01:21Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: 0x00000000
Beyond: 0 x 0000000000000000
Event timestamp: 9:26:2011 13:40
ActiveX: Registered, Version: 7.1.7600.16395
The admin service: recorded, Version: 7.1.7600.16395
Output beyond bitmask:--> HWID data
Current HWID hash: MAAAAAEAAgABAAEAAAABAAAAAwABAAEA6GFotr7FmlHwCbhhTpSI3fp9lPXIq1xdActivation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0 x 20001
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC APIC PTLTD
FACP INTEL CALPELLA
HPET INTEL CALPELLA
START PTLTD $SBFTBL$
MCFG INTEL CALPELLA
SLIC SECCSD LH43STAR
SSDT PmRef CpuPmMake sure that you type the key correctly.
Some characters are not used as 0 and o. try Q instead. (or D)often combined characters are B and 8G and 6Then I tried to activate by phone you said but when you run slui.exe 4, all I get are the options:(1) buy a new product key online
(2) type a different product key (which brings back me to the starting point)
(3) contact Microsoft to help solve this problem (which I do now).
This is a normal behavior for an OEM SLP key. It will not work until your product key is changed.Also can I ask why so many people seems to be to get this problem too, even when their is real as well?
In fact with millions of OEM sold this problem is rare. For the most part we don't know why this is happening. -
Solved: Error 0x80072ee2 Code and problem of invalid key when the key is invalid
The problem with computer problems, it's that they can lose a huge amount of time trying to find the right solution that actually works.
The reason why I created this issue and the solution is because I don't think that anyone allowed to solve the problem and I don't have the time to answer each question.Maybe the administrator can warn everyone and copy the message to the response section wherever it is, thank you.
This solution is the one that actually worked properly and should work fine for 99% of all non only; 0x80072EE2 but key issues not valid genuine key is used.
I don't remember if it was before I ran the Windows 7 disc or after completing what I got the following error message
"Windows Activation error Code: 0x80072EE2.1)< show="" me="" other="" ways="" to="" activate="">
2)< use="" the="" automated="" phone="" system="">
3)< check="" nearest="" location="" (country)="">< next="">
4)< telephone="" toll-free="" telephone="" number="">
(A)< option:="" 1="">
(B)< #="">
(C) enter the activation number into each box when asked to do so
1: after entering the right number in each box-< #="">
2: If you no more; don't remember the exact number you placed in the area or you place
wrong number
It is easy to replace (edit) the wrong number and continue.BEFORE YOU INSTALL OR REPAIR WINDOWS 7 OR ANY OPERATING SYSTEM *.
SOFTWARE BACKUP ALWAYS 1 PREFERABLY ON AN EXTERNAL HARD DRIVE *.
BUT, OF COURSE, YOU CAN USE USB DRIVES OR DVD RECORDABLE RECORD... *.Install or repair Windows 7 (in my case, Home Premium 64 bit OEM but the similar method should be used for other windows): -.
(1) insert my OEM of Windows 7 Home Premium 64 bit disc in my drive (in my case E:\ Drive BD - ROM combo
-You probably D:\ DVD burner)
((2) IF the disc runs automatically and then go to 3) below
(A) if the disc does not automatically
1: Start (red, yellow, green, blue & flag (icon) in a circle) in the lower left corner of the screen
in the taskbar
2: select it (left click on the mouse button)-computer-select the drive (device with removable storage).
you put the Windows disk in
3, select the drive-Yes (if displayed) user account control
(3) Windows 7 (Windows Installer) is displayed
(A)< install="" now="">
(B) install Windows - Get important updates for installation appears
1:< go="" online="" to="" get="" the="" latest="" for="" installation="" (recommended)...="">
2: I left checked (selected) the box, which refers, "I want to help improve the windows installation.
-Useless - do not trust MS & partners - MS should provide free assistance
especially when their software created problems in the first place.
3: check the, "accept the terms of the license" (automatically without reading).
because you have no choice if you want to use.
4:< next="">
5: "which type of installation do you want?
A: I chose < upgrade=""> -because if it solves the problem it would save a lot of time.
B: custom (Advanced) - to only use as a last resort and after backup all data and applications programs.
-It is easy to format and install Windows 7 and other operating systems.
-The main problem is, (the huge amount of time)
find and restore all; drivers, applications (programs), emails.
(C) to continue to follow the Wizard (information/instructions)
(4) I followed the wizard - to give accurate information to reinstall Windows 7, but I received an error message
-J' have probably first uninstall Windows 7.
-NB! If you upgrade all software from a previous version do not remove the previous version
unless directed to do, because he needs evidence that a previous version exists.
-If you install a full version of a software, it's usually best to uninstall the previous version
before installing the new version.Hope that this record many people losing large amounts of time, I did.
Before I forget, every time (including recently) I asked for Activation of the aid staff
They told me to contact Microsoft (MS) Technical Department
(even to resolve this error: 0x80072EE2, which is a problem of Activation).Therefore, I would never check for MS and partners to obtain automatically the information from my computer.
Occasionally, I'll send messages manually when asked.Solved: Error 0x80072ee2 Code and
The key problem of invalid when key is valid
The problem with computer problems, is that they can lose a huge amount of time
try to find the right solution that actually works.
Why I created this issue and the solution is because I don't think that no matter what
No one helped to solve the problem, and I don't have the time to answer each question.
Maybe the admin can warn everyone and copy the message to the response section
wherever it is, thank you.
This solution is the only one that actually worked properly and
should work fine for 99% of all and not only;
0x80072EE2 but key issues not valid genuine key is used.
I don't remember if it was before I ran the Windows 7 disc or
After completing what I got the following error message
"Windows Activation error Code: 0x80072EE2.1)< show="" me="" other="" ways="" to="" activate="">
2)< use="" the="" automated="" phone="" system="">
3)< check="" nearest="" location="" (country)="">< next="">
4)< telephone="" toll-free="" telephone="" number="">
(A)< option:="" 1="">
(B)< #="">
(C) enter the activation number into each box when asked to do so
1: after entering the right number in each box-< #="">
2: If you no more; do not remember the correct numberwho has placed you in the box or you put the wrong number
It is easy to replace (edit) the wrong number and continue.BEFORE INSTALL OR REPAIR - WINDOWS 7 OR ANY OPERATING SYSTEM
ALWAYS 1 BACKUP SOFTWARE. PREFERENCE-HDD EXTERNALBUT, YOU CAN USE A USB DRIVE OR RECORDING ON RECORDABLE DVD DISCS...
Install or repair Windows 7 (in my case, Home Premium 64 bit OEM)
but, the same method should be used for other windows):-
(1) insert my OEM of Windows 7 Home Premium 64 bit disc in my drive
(in my case E:\ BD - ROM combo drive - you probably D:\ DVD burner)
((2) if the disc runs automatically and then go to 3) below
(A) if the disc does not automatically
1: Start (red, yellow, green, blue & flag (icon) in a circle)in the lower left corner of the screen on the task bar
2: select it (left click on the mouse button)-computer-select the drive(Device with removable storage), you put the Windows disk in
3, select the drive-Yes (if displayed) user account control
(3) Windows 7 (Windows Installer) is displayed
(A)< install="" now="">1: after you place Windows in the drive do not touch keyboard keys
while restarting the computer (once it has been shut down
Just enter the password to log back on and ignore the error messages
(B) install Windows - Get important updates for installation appears
1:< go="" online="" to="" get="" the="" latest="" for="" installation="" (recommended)...="">
2: I left checked (selected) the box, which means,."I want to help improve the windows installation.
-Useless - do not trust MS & partners - MS should provide free assistance
especially when their software created problems in the first place.
3: check the, "accept the terms of the license" (automatically without reading).
because you have no choice if you want to use.
4:< next="">
5: "which type of installation do you want?
A: I chose< upgrade="">-Because if it solves the problem it would save a lot of time.
B: custom (Advanced)N ' use as a last resort and after backup all data and applications programs.
-It is easy to format and install Windows 7 and other operating systems.
-The main problem is, (the huge amount of time)
find and restore all; drivers, applications (programs), emails.
(C) to continue to follow the Wizard (information/instructions)
(4) I followed the wizard - to give accurate information to reinstall Windows 7,but I got an error message.
-J' have probably first uninstall Windows 7.
-NB! If you upgrade all software from a previous versiondo not delete the previous version unless told to do so,
because he needs proof that there is a previous version.
-If you install a full version of a software, it's usually best to uninstall - previous version
before installing the new version.Hope this save many people lost large amounts of time that I lost.
Before I forget, every time (including recently) I asked for Activation of the aid staff
They told me to contact Microsoft (MS) Technical Department
(even to resolve this error: 0x80072EE2, which is a problem of Activation - I couldn't believe it).Therefore, I would never check for MS and partners
for the information automatically to my computer.
But, sometimes I send messages manually when asked.MS have done at least millions of people that help the MS, but still
MS refuses to provide Support Free Chat in the world.
-How much profit is MS wants to do,
especially in situations when in fact MS software causes problems.
To save space the administrator can delete previous versions of courrupted.
I only hope that the conversion software does not change the format of this version too.
-
Error Situation code: 14038411
When I tried to use the HP Solution Center, the printer is not found.
I downloaded the latest version of the installation software "PS_AIO_02_USW_Full_Win_WW_130_140 .exe (1).
Twice, I tried to install the software and received this message during the installation of the file "error Situation code: 14038411.
Error = 0x4c8 "the requested operation cannot be performed on a file with a user mapped section open"
Windows 7 Edition Home Premium. HP Photosmart c4385
Can anyone help?
Hi Marklowell,
Follow the steps below
First step: clear temp directory
- Type %temp% term or search programs and files of field
- Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
- Proceed to step 2 below
Second step: downloaded and extracted to your system:
1 download the drivers and full software features
2. once the download is complete, double-click the file to extract the software.
3. when the installation window opens, press the Cancel button to stop the installation
4. tap folder in the race or search programs and files of field
5. Locate and open the folder starting with 7z (example: 7zS2356)
6. right click on the folder and select copy
7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.
8 open the 7z, that you just copied on your desktop
9 open the Util folder
10 open the CCC folder
11 start the uninstall_L4
12. once the uninstall is complete, restart the computer
13. run disk cleanup from the tools Accessories\ system under all programs folder
14. download and install the latest version of Adobe flash player
http://www.Adobe.com/support/flashplayer/downloads.html
15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.
Let me know if you are able to successfully install the software and driver and are able to print & scan?
Maybe you are looking for
-
HP Stream Notebook 11th session of the Committee: 10 windows
I signed up for the new windows 10 updated but just found out that if I do not download it I'm not always able to do a factory reset if necessary, comments on this you I do a factory reset at any time? A lot of sanae
-
350g 1: IDT driver for windows 10
High-definition audio codec, IDT does not work properly in windows 10 is there an updated driver for windows 10?
-
Uninstalled the USB root HUB and now computer will not work
Hello Just got a new computer and I'm afraid I might have broke it... My computer is a HP Envy 23-c100xt with Windows 8. I tried to use one of the ports 3.0 and 2.0 and it wouldn't read my USB, but I tried on another computer so I know this isn't the
-
My windows guard lose focus when bluetooth is activated
Hi, I have a problem with my bluetooth. When my bluetooth on my laptop computer goes active i.e. "B bluetooth" in the icon bluetooth on the botton in the Windows tray goes from white to green this problem run. At this precise moment, I am working in
-
Problem with display of contacts'names in the Vibe Lenovo X 2 - CU